Construção e validação de um receptor GPS para uso espacial

Global Positioning System, or simply GPS, it is a radionavigation system developed by United States for military applications, but it becames very useful for civilian using. In the last decades Brazil has developed sounding rockets and today many projects to build micro and nanosatellites has appeared. This kind of vehicles named spacecrafts or high dynamic vehicles, can use GPS for its autonome location and trajectories controls. Despite of a huge number of GPS receivers available for civilian applications, they cannot used in high dynamic vehicles due environmental issues (vibrations, temperatures, etc.) or imposed dynamic working limits. Only a few nations have the technology to build GPS receivers for spacecrafts or high dynamic vehicles is available and they imposes rules who difficult the access to this receivers. This project intends to build a GPS receiver, to install them in a payload of a sounding rocket and data collecting to verify its correct operation when at the flight conditions. The inner software to this receiver was available in source code and it was tested in a software development platform named GPS Architect. Many organizations cooperated to support this project: AEB, UFRN, IAE, INPE e CLBI. After many phases: defining working conditions, choice and searching electronic, the making of the printed boards, assembling and assembling tests; the receiver was installed in a VS30 sounding rocket launched at Centro de Lançamento da Barreira do Inferno in Natal/RN. Despite of the fact the locations data from the receiver were collected only the first 70 seconds of flight, this data confirms the correct operation of the receiver by the comparison between its positioning data and the the trajectory data from CLBI s tracking radar named ADOUR

Desenvolvimento e testes de software de um receptor de GPS para uso espacial

Spacecraft move with high speeds and suffer abrupt changes in acceleration. So, an onboard GPS receiver could calculate navigation solutions if the Doppler effect is taken into consideration during the satellite signals acquisition and tracking. Thus, for the receiver subject to such dynamic cope these shifts in the frequency signal, resulting from this effect, it is imperative to adjust its acquisition bandwidth and increase its tracking loop to a higher order. This paper presents the changes in the GPS Orion s software, an open architecture receiver produced by GEC Plessey Semiconductors, nowadays Zarlink, in order to make it able to generate navigation fix for vehicle under high dynamics, especially Low Earth Orbit satellites. GPS Architect development system, sold by the same company, supported the modifications. Furthermore, it presents GPS Monitor Aerospace s characteristics, a computational tool developed for monitoring navigation fix calculated by the GPS receiver, through graphics. Although it was not possible to simulate the software modifications implemented in the receiver in high dynamics, it was observed that the receiver worked in stationary tests, verified also in the new interface. This work also presents the results of GPS Receiver for Aerospace Applications experiment, achieved with the receiver s participation in a suborbital mission, Operation Maracati 2, in December 2010, using a digital second order carrier tracking loop. Despite an incident moments before the launch have hindered the effective navigation of the receiver, it was observed that the experiment worked properly, acquiring new satellites and tracking them during the VSB-30 rocket flight.

Método dinâmico aplicado para antenas cilíndricas

Nowadays there has been a major breakthrough in the aerospace area, with regard to rocket launches to research, experiments, telemetry system, remote sensing, radar system (tracking and monitoring), satellite communications system and insertion of satellites in orbit. This work aims at the application of a circular cylindrical microstrip antenna, ring type, and other cylindrical rectangular in structure of a rocket or missile to obtain telemetry data, operating in the range of 2 to 4 GHz, in S-band. Throughout this was developed just the theoretical analysis of the Transverse transmission line method which is a method of rigorous analysis in spectral domain, for use in rockets and missiles. This analyzes the spread in the direction "ρ" , transverse to dielectric interfaces "z" and "φ", for cylindrical coordinates, thus taking the general equations of electromagnetic fields in function of e [1]. It is worth mentioning that in order to obtain results, simulations and analysis of the structure under study was used HFSS program (High Frequency Structural Simulator) that uses the finite element method. With the theory developed computational resources were used to obtain the numerical calculations, using Fortran Power Station, Scilab and Wolfram Mathematica ®. The prototype was built using, as a substrate, the ULTRALAM ® 3850, of Rogers Corporation, and an aluminum plate as a cylindrical structure used to support. The agreement between the measured and simulated results validate the established processes. Conclusions and suggestions are presented for continuing this work

Impactos sócio-econômicos e ambientais da introdução da Tilápia do Nilo, Oreochromis niloticus, em açudes públicos do semi-árido nordestino, Brasi

The stocking of exotic fish, especially the tilapia, has become a common practice in the public reservoirs of the Brazilian semi-arid region. The stocking of tilapias has had as its main aim the improvement of the fisheries in the reservoirs and consequently the improvement of the socio-economic conditions of the families that have fishing as the main source of income. However, the environmental risks associated with this practice are high and can lead to a loss in aquatic biodiversity and to changes in the quality of the water. The object of this work was to quantify the socio-economic and environmental effects of the introduction of the Nile tilapia in the public reservoirs of the semi-arid northeastern Brazil. The analysis of the fish yield of 100 public reservoirs from 1970 to 2000 demonstrated that the introduction of the Nile tilapia apparently contributed to an increase in the total fish yield from the late 1970 s until the mid-1980 s. Nevertheless, from that time onwards the fish yield in these reservoirs has fallen into decline to levels inferior to those observed prior to the introduction of the tilápia. The analysis of the fishing activity statistics of the Gargalheiras reservoir located in the city of Acari, Rio Grande do Norte, demonstrated that the introduction of the Nile tilapia in the reservoir has not significantly increased the fish yield, the gross overall income, the gross per capita income nor the number of fishermen actively fishing in the reservoir. On the other hand, the analysis of the fishing activity statistics of the Gargalheiras reservoir has revealed a significant reduction in the captures of other commercially important fish species after the introduction of the tilapia. This result suggests that the Nile tilapia could have negatively affected other species of fish in the reservoir, contributing to the decline in their stocks. In order to assess the perception of the fishermen concerning the effects of the Nile tilapia over other species of fish and the quality of the water, questionnaires containing open and multiple choice questions were applied with 30 fishermen from the colony of the Gargalheiras reservoir. The great majority of the local fishermen stated that the tilapia is currently the most important species of fish to those who depend on fishing as a source of income and that they have not caused damage to other species of fish nor to the quality of the water in the reservoir. However, the results of the present work indicate that the alleged socio-economic benefits, employed to justify the introduction of the Nile tilapia in the reservoirs, are overestimated while the environmental impacts of the introduction of this exotic species are underestimated