9 resultados para Pós-condicionamento isquêmico
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Para avaliar os efeitos de diferentes tempos de pré-condicionamento isquêmico (IPC) em translocação bacteriana intestinal (BT). MÉTODOS: Trinta ratos Wistar pesando 280 ± 27g foram divididos em cinco grupos. No grupo IV (n = 6), a laparotomia foi realizada e a artéria mesentérica superior foi obstruído por um microclampe atraumática durante 30 minutos. Nos quatro grupos de pré-condicionamento (n = 6 cada) antes dos 30 minutos de isquemia-reperfusão (I / R), os ratos foram submetidos a IPC para duas, cinco, dez e 15 minutos, seguido pelo mesmo momento da reperfusão. A fim de avaliar se o tempo de pré-condicionamento influenciaram o surgimento de translocação bacteriana, as amostras de nódulos linfáticos mesentéricos, fígado e baço foram colhidas em condições estéreis, 24 horas após os procedimentos para a quantificação de unidades formadoras de colónias de bactérias por grama de tecido (CFU / g). O sangue foi recolhido para a medição de citoquinas. RESULTADOS: No grupo I / R, o total de CFU / g em gânglios linfáticos mesentéricos, baço, fígado, bem como o soro de TNF-a, IL-1A e IL-6 foram significativamente mais elevados do que nos outros grupos (p <0,05). Pré-condicionamento por 15 minutos significativamente atenuada BT e citocinas séricas quando comparado a outros períodos de pré-condicionamento (p <0,05). CONCLUSÃO: Nossos dados sugerem que o pré-condicionamento como um fator chave para reduzir a translocação bacteriana intestinal em I / R. Numa escala de dois a 15 minutos, o melhor tempo de pré-condicionamento isquémico pela atenuação da translocação bacteriana foi de 15 minutos
Resumo:
Para avaliar os efeitos de diferentes tempos de pré-condicionamento isquêmico (IPC) em translocação bacteriana intestinal (BT). MÉTODOS: Trinta ratos Wistar pesando 280 ± 27g foram divididos em cinco grupos. No grupo IV (n = 6), a laparotomia foi realizada e a artéria mesentérica superior foi obstruído por um microclampe atraumática durante 30 minutos. Nos quatro grupos de pré-condicionamento (n = 6 cada) antes dos 30 minutos de isquemia-reperfusão (I / R), os ratos foram submetidos a IPC para duas, cinco, dez e 15 minutos, seguido pelo mesmo momento da reperfusão. A fim de avaliar se o tempo de pré-condicionamento influenciaram o surgimento de translocação bacteriana, as amostras de nódulos linfáticos mesentéricos, fígado e baço foram colhidas em condições estéreis, 24 horas após os procedimentos para a quantificação de unidades formadoras de colónias de bactérias por grama de tecido (CFU / g). O sangue foi recolhido para a medição de citoquinas. RESULTADOS: No grupo I / R, o total de CFU / g em gânglios linfáticos mesentéricos, baço, fígado, bem como o soro de TNF-a, IL-1A e IL-6 foram significativamente mais elevados do que nos outros grupos (p <0,05). Pré-condicionamento por 15 minutos significativamente atenuada BT e citocinas séricas quando comparado a outros períodos de pré-condicionamento (p <0,05). CONCLUSÃO: Nossos dados sugerem que o pré-condicionamento como um fator chave para reduzir a translocação bacteriana intestinal em I / R. Numa escala de dois a 15 minutos, o melhor tempo de pré-condicionamento isquémico pela atenuação da translocação bacteriana foi de 15 minutos
Resumo:
The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed
Resumo:
The objectives of this clinical study was to evaluate the use of the toothpaste with fluoride and without fluoride and the daily tooth brushing are effective in the reversion of the dental enamel conditioned by acid. Another objective of this clinical study was to evaluate if the positioning of orthodontic accessories with glass ionomer cement helps in the reversion of the dental enamel conditioned by acid, when compared to composed resin. One hundred and twenty teeth were selected with indication of extraction by orthodontic reasons. The 30 volunteers were divided, randomly, in two groups. A group used toothpaste without fluoride and the other with it. The teeth of the sample were shuffled, in each volunteer. The teeth were conditioned by the 37% orthophosphoric acid. One of the conditioned teeth stayed in the mouth and suffered action of the abrasion for the tooth brushing, in another teeth a stainless steel mesh protection was positioned with glass ionomer cement, in another tooth the screen was glued with composed resin, in a fourth tooth (the control) was only conditioned after the extractions, 60 days later. All the teeth were appraised through DIAGNOdent, MEVA and EDS. In the obtained data it was possible to observe that there were not statistic significant differences in any comparison, even in the group that did not have access to the fluoride in the toothpaste as in the other that had. According with the used methodology, it was possible to observe too that there was not statistic significant differences in any comparison, even in the group that had the stainless steel mesh positioned with glass ionomer cement as in the group that the stainless steel mesh was positioned with composed resin. However, it was observed that there was an improvement in the topography of the enamel in all the teeth. The accomplishment of this study was facilitated due to the participation of the researchers' of the health area (dentistry), materials engineer, physics and chemistry. The researchers were originating from the Federal University of Rio Grande do Norte and of the University of Queensland, in Australia. This interdisciplinary group was decisive in the accomplishment of the study. It can be concluded that the enamel tends to return to its initial aspect, even if the patient does not have access to fluoride. That is probably due the action of the abrasion for the tooth brushing and mastication. In spite of it not being significant, it is suggested that the conditioned enamel was more resistant to the abrasion in the group that had access to fluoride. It was also possible to conclude that the fluoride liberated by the glass ionomer was not enough to provide a significant difference in the enamel conditioned by the acid, when compared with the composed resin, even in the group that did not use fluoride in the toothpaste as in the group that used
Resumo:
PURPOSE: Stroke is a high-incidence cerebrovascular disease with elevated morbidity that results in impairments such as functional disabilities. This study aimed to investigate the functional evolution of individuals in the first six months post-stroke. METHOD: Longitudinal study with 42 stroke patients. The functional independence measure (FIM) and The National Institutes of Health Stroke Scale (NIHSS) were used by multidisciplinary staff 3 times in each participant; the first application was at admission to rehabilitation and the others three and six months later. RESULTS: Sample predominantly female (57%), married (52%), mean age 65.26 ±10.72 years, elementary schooling level (43%), ischemic stroke (91%), and right cerebral hemisphere (74%). Motor FIM scores and NIHSS scale showed improvement in the 3 evaluations, with significant p-value (<0.001). There was a strong relation between motor FIM evolution and NIHSS evolution (r = - 0.69 p-value< 0.001). CONCLUSIONS: It was observed that functional evolution at 6 months post-stroke was significant and the smaller the evolution of clinical impairment in these patients, the larger the evolution of their functional independence. The study is important because it allows a more appropriate therapeutic planning according with functional evolution in stroke rehabilitation
Resumo:
Mirror therapy (MT) is being used as a rehabilitation tool in various diseases, including stroke. Although some studies have shown its effectiveness, little is known about neural mechanisms that underlie the rehabilitation process. Therefore, this study aimed at assessing cortical neuromodulation after a single MT intervention in ischemic stroke survivors, by means of by functional Magnetic Resonance Imaging (fMRI) and Transcranial Magnetic Stimulation (TMS). Fifteen patients participated in a single thirty minutes MT session. fMRI data was analyzed bilaterally in the following Regions of Interest (ROI): Supplementary Motor Area (SMA), Premotor cortex (PMC), Primary Motor cortex (M1), Primary Sensory cortex (S1) and Cerebellum. In each ROI, changes in the percentage of occupation and beta values were computed. Group fMRI data showed a significant decreased in the percentage of occupation in PMC and cerebellum, contralateral to the affected hand (p <0.05). Significant increase in beta values was observed in the following contralateral motor areas: SMA, Cerebellum, PMC and M1 (p<0,005). Moreover, a significant decrease was observed in the following ipsilateral motor areas: PMC and M1 (p <0,001). In S1 a bilateral significant decrease (p<0.0005) was observed.TMS consisted of the analysis of Motor Evoked Potential (MEP) of M1 hotspot. A significant increase in the amplitude of the MEP was observed after therapy in the group (p<0,0001) and individually in 4 patients (p <0.05). Altogether, our results imply that single MT intervention is already capable of promoting changes in neurobiological markers toward patterns observed in healthy subjects. Furthermore, the contralateral hemisphere motor areas changes are opposite to the ones in the ipsilateral side, suggesting an increase system homeostasis.
Resumo:
The studied region, named Forquilha and localized in northwestern Central Ceará domain (northern portion of Borborema Province), presents a lithostratigraphic framework constituted by paleoproterozoic metaplutonics, metasedimentary sequences and neoproterozoic granitoids. The metasedimentary rocks of Ceará group occupy most part of the area. This group is subdivided in two distinct units: Canindé and Independência. Canindé unit is represented basically by biotite paragneisses and muscovite paragneisses, with minor metabasic rocks (amphibolite lens). Independência sequence is composed by garnetiferous paragneisses, sillimanite-garnet-quartz-muscovite schists and quartz-muscovite schists, pure or muscovite quartzites and rare marbles. At least three ductile deformation events were recognized in both units of Ceará group, named D1, D2 and D3. The former one is interpreted as related to a low angle tangential tectonics which mass transport is southward. D2 event is marked by the development of close/isoclinal folds with a N-S oriented axis. Refolding patterns generated by F1 and F2 superposition are found in several places. The latest event (D3) corresponds to a transcurrent tectonics, which led to development of mega-folds and several shear zones, under a transpressional regime. The mapped shear zones are Humberto Monte (ZCHM), Poço Cercado (ZCPC) and Forquilha (ZCF). Digital image processing of enhanced Landsat 7-ETM+ satellite images, combined with field data, demonstrate that these penetrative structures are associated with positive and negative geomorphologic patterns, distributed in linear and curvilinear arrangements with tonal banding, corresponding to the ductile fabric and to crests. Diverse color composites were tested and RGB-531 and RGB-752 provided the best results for lineament analysis of the most prominent shear zones. Spatial filtering techniques (3x3 and 5x5 filters) were also used and the application of Prewitt filters generated the best products. The integrated analysis of morphological and textural aspects from filtered images, variation of tonalities related to the distribution of geologic units in color composites and the superposition over a digital elevation model, contributed to a characterization of the structural framework of the study area. Kinematic compatibility of ZCHM, ZCPC, ZCF shear zones, as well as Sobral-Pedro II (ZCSPII) shear zone, situated to the west of the study area, was one of the goal of this work. Two of these shear zones (ZCHM, ZCPC) display sinistral movements, while the others (ZCSPII, ZCF) exhibit dextral kinematics. 40Ar/39Ar ages obtained in this thesis for ZCSPII and ZCPC, associated with other 40Ar/39Ar data of adjacent areas, indicate that all these shear zones are related to Brasiliano orogeny. The trend of the structures, the opposite shear senses and the similar metamorphic conditions are fitted in a model based on the development of conjugate shear zones in an unconfined transpression area. A WNW-ESE bulk shortening direction is infered. The geometry and kinematic of the studied structures suggest that shortening was largely accommodated by lateral extrusion, with only minor amounts of vertical stretch
Resumo:
This thesis aims to advance in the geological knowledge of the region comprising the Piancó-Alto Brígida (TPAB) and Alto pajeú (TAP) terranes, in the Transversal Zone Domain (Borborema Province, NE Brazil), with the main objective of understanding the geodynamic evolution and the structural framework of these units. To reach this objective, and besides field work and interpretation of traditional aerial photographs, other tools were employed like of remote sensing products (Landsat 7 ETM+, aeroradiometrics, aeromagnetics and topographical images), lithogeochemical (whole rock) analyses and geochronological dating (U-Pb in zircon), besides integration with literature data. In the area, several precambrian geological units outcrop, represented in the TAP by the paleoproterozoic Serra Talhada and Afogados da Ingazeira complexes, Riacho Gravatá Complex (metavolcano-sedimentary sequence of Stenian-Tonian age) and Cariris Velhos orthogneisses (of Tonian age). The TPAB comprises the Santana do Garrote (lower unit) and Serra do Olho d'Água (upper unit) formations of the Cachoeirinha Group (Neoproterozoic III), besides the Piancó orthogneisses and Bom Jesus paragneisses; the latter correspond to an older (basement ?) block and a possible high grade equivalent of the Cachoeirinha Group (or Seridó Group ?), respectively. Several Brasiliano-age plutons occur in both terranes.The aeromagnetic data show the continuity, at depth, of the main shear zones mapped in the region. The Patos, Pernambuco, Boqueirão dos Cochos, Serra do Caboclo, Afogados da Ingazeira/Jabitacá and Congo-Cruzeiro do Nordeste shear zones reach depths greater than to 6-16 km. The aeromagnetic signature of other shear zones, like the Juru one, suggests that these structures correspond to shallower crustal features. The satellite images (Landsat 7 ETM+) and aerogamaspectrometric images discriminate different geological units, contributing to the mapping of the structural framework of the region. The Serra do Caboclo Shear Zone was characterized as the boundary/suture between the TPAB and TAP. This structure is an outstanding, pervasive feature that separates contrasting geological units, such as the Neoproterozoic III Cachoeirinha Group in the TPAB and the Riacho Gravatá Complex and the Cariris Velhos metaplutonics, of Stenian-Tonian age, in the TAP. Occupying different blocks, these units are not found in authoctonous relations, like unconformities and intrusive contacts. Concerning the Cariris Velhos (ca. 1,0 Ga old) event is recorded by radiometric ages of the Riacho Gravatá Complex metavolcanics and intrusive augen and orthogneisses, all of them displaying geochemical affinities of arc or collisional settings. A structural signature of this event was not recorded in the region, possibly due to its low grade/low strain style, obliterated by the overprinting of younger, higher grade/high strain Brasiliano-age fabrics.The first tectonic event (D1) observed in the Cariris Velhos lithotypes presents contractional kinematics with transport to the NW. Neoproterozoic III geochronologic dates, obtained in late-D1 granitoids, imply a Brasiliano age (ca. 610-600 Ma) for this deformation event. The second tectonic event (D2) characterized in the region corresponds to the Brasiliano transcurrent kinematics of the outstanding shear zones and associated granitoid plutons. The geochronological (U-Pb in zircon) data obtained during this thesis also confirms the occurrence of the Cariris Velhos magmatic suite in the TAP, as well as the Neoproterozoic III age to the Cachoeirinha Group in the TPAB. The TAP (Riacho Gravatá Complex, augen and orthogneisses) is interpreted as a continental arc possibly accreted to a microcontinent during the Cariris Velhos (Stenian-Tonian) event. Later on, this terrane collided with the TPAB at the beginning of the Brasiliano orogeny (D1 contractional deformation), and both domins were reworked by the transcurrent shear deformation of the D2 event
Resumo:
The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed