6 resultados para Over Head Line Design

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aerial activities, leaps and slaps with parts of the body in the surface of water, are part of the behavioral repertoire of several species of cetaceans. Among them, the spinner dolphin, Stenella longirostris, shows greater diversity in such behavior. For the spinner dolphins of Fernando de Noronha, the aerial activities are classified as vertical and horizontal, with eight patterns to be noted (tail slap, head slap, motor boating, partial leap, leap, spin, tail over head and tail over head with spin) discriminated between these categories. Such behaviors can be used as a parameter to identify behavioral changes, as well as patterns of daily and seasonal activity. In this manner, this study aimed to characterize the frequency in performance of such activity while the dolphins were within the Dolphin Bay of Fernando de Noronha, and verify possible daily and seasonal hourly fluctuations on such behaviors. The data analyzed in this study was acquired during the period of January 2006 through December 2010, totaling 1431 days of observation from land set point, with 113027 aerial activities registered, daily average of 72,27 (SD=96,10). During 5478h and 54 min of observation the horizontal aerial activity was the most observed and rotation was the most executed pattern. Greater frequency of execution of aerial activity was observed in adults, but for both adults and calves, was observed a predominance of horizontal activities, with spin being the pattern most executed. Positive correlation was observed between the amount of aerial activity performed and the number of animals inside the Bay. Hourly daily fluctuation was observed in the expression of aerial activities by spinner dolphins, and was observed a peak of activity between 8h and 8h59min for the overall frequency relative of aerial activities, as well as for the categories and patterns. Seasonal differences were observed between the rainy and dry season with the greater amount of activity being observed during the rainy season. Nevertheless, the same profile of frequency relative of aerial activity was observed in both seasons with the peak amount being during the same period. When discriminated the aerial activities in categories and patterns, for both seasons, there was a similar pattern of hourly fluctuation; for most of parameters, higher frequency relative of execution of aerial activity remain between 8h and 8h59min

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The ethanol is the most overused psychoactive drug over the world; this fact makes it one of the main substances required in toxicological exams nowadays. The development of an analytical method, adaptation or implementation of a method known, involves a process of validation that estimates its efficiency in the laboratory routine and credibility of the method. The stability is defined as the ability of the sample of material to keep the initial value of a quantitative measure for a defined period within specific limits when stored under defined conditions. This study aimed to evaluate the method of Gas chromatography and study the stability of ethanol in blood samples, considering the variables time and temperature of storage, and the presence of preservative and, with that check if the conditions of conservation and storage used in this study maintain the quality of the sample and preserve the originally amount of analyte present. Blood samples were collected from 10 volunteers to evaluate the method and to study the stability of ethanol. For the evaluation of the method, part of the samples was added to known concentrations of ethanol. In the study of stability, the other side of the pool of blood was placed in two containers: one containing the preservative sodium fluoride 1% and the anticoagulant heparin and the other only heparin, was added ethanol at a concentration of 0.6 g/L, fractionated in two bottles, one being stored at 4ºC (refrigerator) and another at -20ºC (freezer), the tests were performed on the same day (time zero) and after 1, 3, 7, 14, 30 and 60 days of storage. The assessment found the difference in results during storage in relation to time zero. It used the technique of headspace associated with gas chromatography with the FID and capillary column with stationary phase of polyethylene. The best analysis of chromatographic conditions were: temperature of 50ºC (column), 150ºC (jet) and 250ºC (detector), with retention time for ethanol from 9.107 ± 0.026 and the tercbutanol (internal standard) of 8.170 ± 0.081 minutes, the ethanol being separated properly from acetaldehyde, acetone, methanol and 2-propanol, which are potential interfering in the determination of ethanol. The technique showed linearity in the concentration range of 0.01 and 3.2 g/L (0.8051 x + y = 0.6196; r2 = 0.999). The calibration curve showed the following equation of the line: y = x 0.7542 + 0.6545, with a linear correlation coefficient equal to 0.996. The average recovery was 100.2%, the coefficients of variation of accuracy and inter intra test showed values of up to 7.3%, the limit of detection and quantification was 0.01 g/L and showed coefficient of variation within the allowed. The analytical method evaluated in this study proved to be fast, efficient and practical, given the objective of this work satisfactorily. The study of stability has less than 20% difference in the response obtained under the conditions of storage and stipulated period, compared with the response obtained at time zero and at the significance level of 5%, no statistical difference in the concentration of ethanol was observed between analysis. The results reinforce the reliability of the method of gas chromatography and blood samples in search of ethanol, either in the toxicological, forensic, social or clinic

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work aims to promote design aspects into furniture Small and Medium Enterprises (SME s) at Rio Grande do Norte State. The final outcome will be an increasing on their competitiveness as well as consider design as key strategic aspect for their business. As a consequence, the results are based on two SME companies from the furniture sector located at Natal/RN. The study is based on a literature research followed by a management diagnosis for each company. The diagnosis was base don interviews with the entrepreneurs and their employees as well as meetings, participant observations and document analysis. Based on this analysis, specific aspects were implement in order to boost the production line as well as the product development process (PDP) and the development of a prototype. The results have indicated some limitation of these companies regarding their low technological on their production line, poor management and work skills as well as low perception of design as a competitive tool. Regardless these results, it was observed that design has brought an important contribution for cultural changes within companies as well as for the development of better quality and competitive products

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work deals with an on-line control strategy based on Robust Model Predictive Control (RMPC) technique applied in a real coupled tanks system. This process consists of two coupled tanks and a pump to feed the liquid to the system. The control objective (regulator problem) is to keep the tanks levels in the considered operation point even in the presence of disturbance. The RMPC is a technique that allows explicit incorporation of the plant uncertainty in the problem formulation. The goal is to design, at each time step, a state-feedback control law that minimizes a 'worst-case' infinite horizon objective function, subject to constraint in the control. The existence of a feedback control law satisfying the input constraints is reduced to a convex optimization over linear matrix inequalities (LMIs) problem. It is shown in this work that for the plant uncertainty described by the polytope, the feasible receding horizon state feedback control design is robustly stabilizing. The software implementation of the RMPC is made using Scilab, and its communication with Coupled Tanks Systems is done through the OLE for Process Control (OPC) industrial protocol

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The need for sustainability in the exploitation of natural resources in coastal areas has been out in recent years, as well as the social and cultural sustainability of traditional communities in these regions. Coastal and estuarine wild areas are influenced directly or indirectly by a set of human activities such as artisanal fishing. Therefore, there is a demand for an integrated design of these areas and according to the landing values, a pattern of unsustainable development of national marine fishing activity. The study was conducted in the coastal community of Praia da Pipa, Tibau do Sul municipality, RN, between june 2009 and june 2010 and aimed to characterize the fishery performed, its socio-economic strategies and fishing areas, as well as to identify ichthyofauna, to assess the sustainability of the major resources and to identify cultural traits related to artisanal fisheries, their problems and prospects; linking tradition and the present fishing activity carried out in the community. For this study, a total of 67 structured interviews were collected, including qualitative and quantitative data. A total of 133 fish landings and direct observations were performed. Informants were identified according to one of the following categories: fishermen, vessel masters and members of the local population with offspring. Applications SPSS 10.0, Paint.Ink and Microsoft Office Excel 2007 were used for tabulation and analysis of results. Local fishermen are, on average, 25 years fishing, have 40 years old and the average monthly income is up to 03 minimum wages. The local fleet consists of 20 vessels, that uses different line sizes and types of networks, operating in 21 fishing grounds and showing a reduction in the vessel numbers by 66% in the last decade. We recorded 76 species of fish, captured by the local fleet and the top 5 were quantitatively analyzed serra spanish mackarel (Scomberomorus brasiliensis), little tunny (Euthynnus alleteratus), yellowtail snapper (Ocyurus chrysurus), red snapper (Lutjanus analis) and common snook (Centropomus undecimalis), accounting for 46,5% of production in the period. The capture of these species was composed mostly of adults. Data analysis showed a significant decrease of the local fishing activity over the last decade due to the weakness displayed by the political-social category, the devaluation of local knowledge and the emergence of new sources of income through increased tourism. The characteristics of the fishing community suggest it to pass through significant changes as the appreciation of their cultural and traditional aspects. We identified a tendency to sustainability of main species caught, suggesting that public policies to be adopted locally comply with the current characteristics of fishing undertaken in the community and knowledge of fishermen related to the environment, allowing environmental, as well as social and cultural sustainability of the community involved.