Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

A percepção das características da face infantil por adultos e crianças sob uma perspectiva evolucionista

Child facial cues evoke attention, parental care behaviors and modulate for infant- caretaker interactions. Lorenz described the baby schema ( Kindchenschema ) as a set of infantile physical features such as the large head, round face, high and protruding forehead, big eyes, chubby cheeks, small nose and mouth. Previous work on this fundamental concept was restricted to positive perception to infant face, and did not show consistent results about the development individuals perceptions, regarding the physical attributes that worked as markers of cuteness. Here, we experimentally tested the effects of baby schema on the perception of cuteness of infant faces by children and adults. We used 60 none graphically manipulated photos of different stimulus children faces from 4 to 9 years old. In the first task for the adults experimental subjects, ten stimulus photos were shown, whereas for children experimental subjects, four stimulus photos were shown at a time, with a total of six rounds. The second task involved only adults, who indicated the motivation of affective behaviors and care directed to children through a Likert scale. Our results suggest that both participants judged similarly the cuteness of children's faces, and the physical features markers of this perception were observed only for younger stimulus children. Adults have attributed more motivations of positive behaviors to cuter stimulus children. The recognition of the baby schema by individuals of different ages and genders confers the universality and power of children's physical attributes. From the evolutionary perspective the responsiveness to baby schema is significant to ensure aloparental and parental investment, and the consequent children survival

Estilos de aprendizagem sob a ótica da Psicologia Evolucionista

Among a variety of learning conceptions, David Kolb´s Experiential Learning Theory proposes four different learning styles: diverging, characterized by orientation towards people and multi-perspective vision; assimilating, concerned with ideas and abstract concepts as well as theory formulation; converging, expert in dealing with technical tasks and problem solving; and accommodating, risk taker and good at getting things done. Interesting correlations have been pointed out between Kolb s learning styles, professional careers and genders. With respect to behaviors, specific cognitive skills and interests, sex differences are widely known, and explained by Evolutionary Psychology as the result of distinct selective pressures acting on each gender. The aim of this research was to assess adolescents learning styles and their relation with interests on school and career choices, analyzing possible gender differences. We distributed questionnaires to 221 senior high school students to research their preferences for school disciplines, professional activities and career choices. The Learning Style Inventory specified the learning style of each individual. Our results showed a high frequency of reflective styles, with predominance of females as diverging and males as assimilating. Concerning school and professional interests, there were correlations between styles oriented towards the abstract and technical interests. Moreover, females preferred disciplines related to languages and interpersonal activities while males preferred disciplines related to science and technical activities. There were more males in exact science and engineering careers, and more females in social science and applied social science. Correlations found between learning styles, school and professional interests corroborate Kolb´s propositions, and the findings about gender differences are supported by Evolutionary Psychology theories

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

A influência da relevância social no viés de grupo

Behaviors found in every culture, general human tendencies, are knew in Evolutionary Psychology as evolved psychological mechanisms. Those behaviors date back the Environment of Evolutionary Adaptedness, and a well know example of such behavior is the group bias (or intergroup bias). This bias consists of recognizing members of your own group and favor them, while disregarding or even harming outsiders. This behavior was and still is extensively studies, among the most important conclusions about this phenomenon is the Minimal Groups Paradigm, in which it was discovered that the group bias could trigger even when the groupings were done in following very arbitrary criteria. In the current study, our goal was to test if the participants, when playing an economic game, would behave in a similar fashion under a minimal group situation and real groups, with social meaning. With this in mind we made two experimental conditions, a Low Social Meaning one (LSM) where the groups were represented by letters (H, B, O and Y) in which participants would be ramdomly assorted to each group; and the High Social Meaning condition (HSM) in which religion was used as a group marker, containing the two most dominating religious groups in Brazil, catholic and evangelic, another group containing all the other affiliations e the fourth and last group representing atheists and agnostics. The ratio of donations in-group/out-group was roughly the same across both conditions. However, the amount of wafers donated to ingroup was significantly bigger in the HSM condition. By verifying which aspects of the individual best predicted the observed group bias, we discovered that the in-group Entitativity perception as well as the Group Identification were the most relevant variables, however, only in the HSM condition. Simultaneously, by verifying the generosity, biased or not, we observed that the agreeableness personality factor was the only variable able to predict it, and only in the LSM condition. We conclude that our generosity, or the lack of it, is for most part defined by our personality, the Agreeableness factor in particular. But this very generosity can be biased by the social meaning of the involved groups and that, if the social meaning is big enough, even people who, thanks to their personality, normally wouldn’t show generosity, are able to do so when the receiver is an in-group member.