Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

O papel do centro histórico na cidade: um estudo comparativo entre João Pessoa e Tours

In the contemporary scene, it is conspicuous that the patrimony and the culture have assumed privileged positions in urban policies, presenting themselves as instruments for transforming and shaping the aspect of cities. In the plot line of such glowing trend, the competitiveness among cities has drawn more attention, for at present such urban centers garner an image that makes them suitable for economic purposes, thus more likely to attract investments and tourists. In the spotlight of such stage, the cities become notable actors, directed by policies of urban rehabilitation. In such plot line, the historical centers gain more visibility and are converted into venues for staging the spectacle of everyday life. Overlapped in this process of producing images, the phenomenon of gentrification recrudesces. Thus, the discussion threaded about the patrimony gains strength in urban studies, keeping a close relationship with the ways of perceiving the cities nowadays. This work is based on the principle that the historical centers are engendered and fond by urban policies, working as transforming instruments of city perceptions and living. In that sense, the way how the historic center and the valuation assessed to old buildings are comprehended by the inhabitants is largely guided by urban policies that outline a sellable image of the city. In the light of such elaborations, an ethnographic research was made with focus on two different contexts, namely: the historic centers of João Pessoa (Brazil) and Tours (France). It was done in a comparative perspective, for it allows us to trace the main specificities of each situation in order to highlight the similarities and distinctions about the two regions mentioned above. The research aimed at apprehending how the pair redevelopment-abandonment engendered by the urban policies influence on the process of revaluation of historical centers by dwellers and to what extent there are convergences regarding such kinds of interventions, as an object of policies of urban and touristic development in Brazil and France. In order to make this work – besides the abundant bibliographic review carried out in libraries of several universities and institutions in Brazil and France – dwellers, merchants, teachers, representative people of public agencies and former residents of the historic centers of both cities were interviewed. In Tours, immigrants/Portuguese descendants were interviewed, point that greatly contributed to the understanding of the historic center before Vieux Tours renewal and restoration. Moreover a rich research on Archives and Public Agencies was done, as well as investigations on newspaper and articles on the Internet. Thus, in the context of the ethnography in historic centers, it was possible to notice that both realities reveal similarities in a comparative analytical framework

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings