Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B

Formação em odontologia: um estudo sobre as clínicas integradas em cursos do Brasil

Dental education is going through important changes in preparing workers to meet the needs of the society and the labor market. For that reason, we studied the offering of comprehensive dental care clinics in Brazil with the aim of encouraging future curriculum changes focused on the training of general dental practitioners. An email questionnaire on educational organization and comprehensive care clinics of undergraduate programs was sent to each academic dental affairs dean. Sixty-seven (41.6%) dental schools agreed to participate. We observed that curriculum changes have contributed to modify the format of comprehensive care clinics. This was felt mainly (88,1%) with regards to workload and course offerings in different levels of the dental curriculum, thereby creating a favorable environment for generalist training. Most schools shared the following characteristics: clinical procedures were being prioritized according to level of complexity (95,5%), students were having the chance to attend courses in other programs (37,3%), and attempt to diversify teaching methods was being challenged (58,2%). Although progress in combining teaching and clinical services was reported by 83,6% of schools, most clinical procedures were still being performed intramurally (50,7%) in partnership with public service. There was also improvement in clinical mentorship due to the hiring of instructors qualified to work in comprehensive care clinics and with aptitude to supervise a wider range of dental procedures (58,2%). Further changes to Brazilian comprehensive care clinics should hence be encouraged and intensified to ensure appropriate generalist training for dental practitioners

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Ergonomia e Odontologia: determinantes da postura corporal dos estudantes da clínica-escola de uma Universidade Federal

Posture is one of the most worrying problems dentists face. That is because of the high incidence of low back pathologies regarding the professional activity, despite the development on the field of Dental Ergonomics. This work took place at the dental schoolclinic at a Federal University, and it was grounded on the Ergonomic Principles in the workplace. Its main objective was to analyze the determinants of inadequate posture adopted by students inasmuch as the adoption of non ergonomic methods at the school-clinic may influence them to develop inadequate postures in their working environment. The analysis of the activity showed us that it requires some complex procedures in the patient s mouth. Thus, when the students carry out the activity, they start to adopt, although unconsciously, inadequate postures which will make easier the visual accuracy and the access to the operation focus. In case there is no internal (body awareness) or external warning mechanisms (the professor s or the partner s counseling) regarding posture or possible risks which lead them to self-correction, the students become vulnerable to osteomuscle disorders. The time pressure, because the students are expected to perform their task in a predetermined clinical time. The facts related to each patient s variability as well as the stress caused by the expectations to get their work done in time make the students to advance it believing they will waste time if they help their partners or using an indirect view. We could also notice that there was no assistant to perform the job of minor ones, as well as there was no professor who could actually connect the knowledge on Ergonomics to its working practice. The conclusions of this work stand out the need of widen the discussion at the academic environment regarding health professionals in places such as universities. The ergonomic principles in the workplace aim a multidisciplinary analysis based on the experience of students, professors, staff members and janitors that can contribute to some reflection upon the issue and consequently actions which will bring positive changes at the working environment

Supervisório Inteligente de Processos na Idústria do Petróleo e Gás :Aplicação em uma Coluna de Destilação Simulada Integrada a Instrumentação Real

The need to implement a software architecture that promotes the development of a SCADA supervisory system for monitoring industrial processes simulated with the flexibility of adding intelligent modules and devices such as CLP, according to the specifications of the problem, it was the motivation for this work. In the present study, we developed an intelligent supervisory system on a simulation of a distillation column modeled with Unisim. Furthermore, OLE Automation was used as communication between the supervisory and simulation software, which, with the use of the database, promoted an architecture both scalable and easy to maintain. Moreover, intelligent modules have been developed for preprocessing, data characteristics extraction, and variables inference. These modules were fundamentally based on the Encog software

Desenvolvimento de um software de comunicação sem fio aplicado à instrumentação de unidade de elevação de petróleo tipo Plunger Lift

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system

Modelagem e controle adaptativo de uma planta didática de nível com instrumentação industrial

The control, automation and optimization areas help to improve the processes used by industry. They contribute to a fast production line, improving the products quality and reducing the manufacturing costs. Didatic plants are good tools for research in these areas, providing a direct contact with some industrial equipaments. Given these capabilities, the main goal of this work is to model and control a didactic plant, which is a level and flow process control system with an industrial instrumentation. With a model it is possible to build a simulator for the plant that allows studies about its behaviour, without any of the real processes operational costs, like experiments with controllers. They can be tested several times before its application in a real process. Among the several types of controllers, it was used adaptive controllers, mainly the Direct Self-Tuning Regulators (DSTR) with Integral Action and the Gain Scheduling (GS). The DSTR was based on Pole-Placement design and use the Recursive Least Square to calculate the controller parameters. The characteristics of an adaptive system was very worth to guarantee a good performance when the controller was applied to the plant

Estudo e especificação de um sistema de instrumentação para unidades de elevação de petróleo utilizando tecnologia sem fio

Wireless sensor networks are reality nowadays. The growing necessity of connectivity between existing industrial plant equipments pushes the research and development of several technologies. The IEEE 802.15.4 LR-WPAN comes as a low-cost and powersaving viable solution, which are important concerns while making decisions on remote sensoring projects. This study intends to propose a wireless communication system which makes possible the monitoring of analogic and/or digital variables (i. e., the pressure studied) involved on the artificial methods for oil and gas lifting. The main issues are: To develop a software based on SMAC Standard in order to create a wireless network to monitoring analogic and/or digital variables; To evaluate the communication link based on the number of lost packets tested in different environments (indoor and outdoor) and To propose an instrumentation system consisting of wireless devices

Programa de odontologia para bebês: uma avaliação quantitativa e qualitativa

The objective of this study was to evaluate a baby dentistry program which has been in the city of Natal for five years. The research was based on two analysis: a quantitative one, which tried to check caries prevalence in 52 children supported by the program and a qualitative one, which, through interviews carried out with the mothers, using the focus group technique, tried to realize the effect of the program their attitudes related to the care of their children´s oral health. For the quantitative analyses of caries prevalence there was the use of def-s and knutson rates and the values obtained were shown in a descritive and analytical way.The results showed that 4.2% of babies ranging 24 to 36 months old presented carie disease. Children from 36 to 48 months old and above 48 months old presented 18.2% and 16.7% carie prevalence respectively.The def-s averages found in ages 24 to 36, 36 to 48 and 48 to 60 months old were 0.08; 0.40 and 1.16 respectively, considered as being equally low, going along with Knutson rates. The qualitative analyses showed a high level of the mothers` satisfaction, considering the access,practitioner-patient relationship and opportunity to keep the oral health. Children supported by the program showed a low carie prevalence and the program turned out to be effective under the mothers` point of view

Projetos políticos pedagógicos dos cursos de Odontologia do RN : formação profissional e a perspectiva da atenção à terceira idade

Brazil has been undergoing major demographic change.According to IBGE, the next 20 years the country's elderly population may reach over 30 million people. This tariff provides specifics regarding the process of health / disease. It is essential that higher education institutions are committed to this demand in view of the integrated training of health needs of society. The aim of this study is to analyze the Pedagogical Political Projects (PPP) of courses in dentistry in Rio Grande do Norte (RN), according to the national curriculum guidelines (DCNS) and training from the perspective of health care for the elderly. This is an exploratory study with a qualitative approach: with records and interviews. The study subjects were an Assistant Professor in the development of PPPs for each institution. The scenario in this study were dental training institutions in the newborns. Initially, the analysis of the PPP was by using the Alceste 4.9 software. The interpretation of the contents of interviews with teachers was done through content analysis of Bardin (2010). The PPPs are based on the DCNS, meet the characteristics of regional and seek a generalist, but still strongly directed to technical and scientific aspects of professional practice. Efforts and institutional approaches, involving teachers and students of the courses are being mobilized for training with more articulated network of health services. However, the emphasis on content pertaining to the health care of the elderly, is still limited when compared to those targeted content inherent in children and adolescents in all three curricular structures. It is reasonable to conclude that the historical, political, scientific, cultural and social, present in society, influence the formation of the dental professional RN. The greater participation of society in the process of vocational training in dentistry is needed. This can be done from the involvement of universities with health councils, bodies representing the dental profession and other segments of civil society in order to induce changes that generate ideas and educational practices integrative and interdisciplinary, with emphasis on continuing education for teachers, servants, employees and students. Containing conduct this process inherent flexibility of curriculum, teaching-service integration and coordination abilities and professional skills that are essential to understanding the human being and its complexities

Bioética e odontologia: um perfil dos problemas éticos vividos por cirurgiões-dentistas

Bioethics studies human behavior in the fields ofbiological sciences and health care. Tt strives for humanization in health services along with promoting the rights of patients. In view of the lack of dental research dealing with this topic, the present study was undertaken to identify, from the viewpoint of dental surgeons, ethical problems experienced in dental practice,understand how they occur and how professionals deal with them. It is a descriptive exploratory investigation within a qualitative approach. Empirical material was collected through semi-structured interviews performed with 15 dental surgeons who work both in private and public practice in the state of Rio Grande do Norte, Brazil. The content of the interviews was systemized and organized, resulting in the identification of topics, from which were grouped the ethical problems reported by the participants. The resu1ts indicate that many of the ethical problems coincide with infringements of the norms and mIes of the Dental Code of Ethics, confirming a dental ethic acquired during professional formation and therefore, inadequate for solving the problems that emerge in professional practice. Other questions stand out such as low salaries, competition and poor working conditions. Associated to these problems are lack of commitment and professional responsibility with the patients. Concem with maintaining user autonomy, guaranteeing access to specialized services, and the need for performing only procedures for which they are technically qualified arise in the responses, leading to difficulties in consolidating the principIes proclaimed by bioethics: autonomy, justice, nonmaleficence and beneficence. We concluded that the ethical problems identified in professional practice need to be understood beyond the dental dimension, towards a human approach. It is therefore necessary to incorporate health care management technologies into health practices, including dentistry, which implies recognizing the difTerent dimensions that surround individuaIs, that is, social, economic, political and cultural

Condição peri-implantar e fatores associados às doenças peri-implantares em pacientes reabilitados no serviço odontológico da faculdade de odontologia da UFRN

A introdução dos implantes dentários osseointegrados como uma ferramenta na reabilitação oral de pacientes edêntulos e parcialmente edêntulos é uma realidade no cotidiano do cirurgião-dentista. Estudos reportam uma alta taxa de sucesso da utilização de implantes no tratamento reabilitador. Entretanto, outras investigações têm mostrado a perda desses implantes devido a infecções peri-implantares, como a mucosite e a peri-implantite. O objetivo deste trabalho foi avaliar a frequência das doenças peri-implantares e seus fatores associados em pacientes com implantes dentais em função reabilitados no serviço odontológico da Faculdade de Odontologia da UFRN. Foram examinados 155 indivíduos portadores de 523 implantes e 2718 dentes. Dentes e implantes foram avaliados por meio de sondagem periodontal, observando-se a profundidade de sondagem, retração gengival, bem como foram avaliados índices de placa visível (IPV) e sangramento gengival (ISG) e presença de supuração. Os dados foram armazenados em fichas clínicas e avaliados estatisticamente por meio da estatística descritiva e inferencial. A idade média dos pacientes foi de 54,05 (± 12,61) anos, sendo 79,4% do sexo feminino. As frequências da mucosite, peri-implantite e periodontite em indivíduos foram 54%, 28% e 50%, respectivamente. Dos 523 implantes avaliados, 43% tinham mucosite, 14% peri-implantite e 43% saúde. Os testes Qui-quadrado de Pearson e Exato de Fisher mostraram que as doenças peri-implantares estão associadas as doenças periodontais, uso de medicação, alterações sistêmicas número de implantes, IPV, ISG, ao tempo de função das próteses, região do implante, número de roscas expostas e faixa de mucosa queratinizada (p<0,05). A análise de regressão múltipla, através da regressão binária logística, constatou que indivíduos que faziam uso de medicação (OR = 1,784), com um ISG > 10% (OR = 1,742), com implantes instalados na maxila (OR = 2,654), onde a prótese sobre o implante tinham mais de 2 anos em função (OR = 3,144) e que radiograficamente apresentavam uma perda óssea atingindo a terceira rosca do implante (OR = 4,701) mostram uma associação positiva com as doenças peri-implantares de maneira que esses indivíduos têm mais chances de ter essas doenças. Os resultados sugerem que a frequência das doenças peri-implantares na população em estudo foi de 82% dos pacientes e que estas doenças estão associadas a fatores relacionados aos indivíduos como: a presença da doença periodontal, piores IPV e IS, alterações sistêmicas, uso de medicação e maior número de implantes; e a fatores locais relacionados aos implantes como: ausência ou faixa de mucosa menor que 2mm, implantes na maxila e na região anterior, perda óssea atingindo a terceira rosca do implante e a um tempo de reabilitação prótetica maior que 2 anos

Prevalência da disfunção temporomandibular em estudantes de odontologia por meio de diferentes índices

The epidemiology of temporomandibular disorders varies widely in the literature. The aim of this study was to determine the prevalence of TMD in dental students of the Federal University of Rio Grande do Norte assessed by different indexes. The sample consisted of 101 individuals selected by a randomized process, whose general outline was systematic sampling. For evaluation of the signs and symptoms of TMD, an anamnestic index, Fonseca s protocol, and two clinical indexes, the RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders), or standard index, and the Helkimo s Clinical Dysfunction Index were applied. Data were analyzed using the chi-square test and kappa, besides verifying the sensitivity and specificity (5% significance). The diagnosis of TMD by different indexes showed a variation in the prevalence between 72.3% (Helkimo s Clinical index), 64.4% (Fonseca s anamnestic index) and 35.6% (RDC/TMD). There was no statistical difference between the sexes for the RDC/TMD, although this difference was found for Fonseca s and Helkimo s indexes (p<0.05). The most frequent type of TMD were joint disorders (Groups II and III), and the subtypes disc displacement with reduction (17.8%) and arthralgia (15.8%). Most individuals showed a mild TMD (45.5%) for both indexes, Fonseca and Helkimo. When comparing the types of diagnoses, RDC/TMD with Fonseca and Helkimo, low agreement was found (k=0.17 and k= 0.35, respectively). A moderate correlation between the severity of TMD was obtained (kw= 0.53) for Fonseca s protocol and Helkimo s index. High sensitivity and low specificity were seen for both diagnoses compared to standard, resulting in excessive false positives. Within the limitations of the study, it was concluded that the prevalence of TMD can vary widely, depending on the index used for its diagnosis

Projeto pedagógico: abordagens e implicações no âmbito da formação em odontologia

Proposals that aim a redirection of current health attention models in Brazil are indispensible due to the need of health issues and its challenges imposed by society. These issues come forth in Higher Education Institutions in an attempt to devise ways to face these demands. The research aims to analyze the Pedagogical Project (PP) present in the Dentistry Graduation Course in the Federal University of Rio Grande do Norte in Brazil-(UFRN). This is done in coherence the Brazilian National Curricular Guidelines considering main competences established in the PP. This research was approved by the Ethics Committee at UFRN under document number 285/201. The work is of descriptive nature and was realized with 30 students in the Dentistry Graduation Course. Interviews were realized with the use of problem situation approach. The research was also supported by documental studies that dealt with syllabus present in the disciplines taught at UFRN. Data were processed with the use of the ALCESTE 4.9 software. It is possible to acknowledge that some conservative conceptions arise, even though there is use of active methodologies and innovation that aim to promote reflection and articulation for general competence development such as proposed in the Pedagogical Project in Dentistry Graduation Course at UFRN. These conceptions are mainly present in the teaching-learning process where students do not have full participation. Thus it is possible to conclude that even though there are advances and breakthroughs. This is seen with that fact that there was inclusion of multidisciplinary clinical work as well optional courses in the curriculum. It was also seen that there was occasional use of active teaching methodologies in Dentistry at UFRN. But there is still a need for a didactical and methodological resizing. These actions require the need for progressive development of competences and abilities during the formative process according to what was established in the Brazilian National Curricular Guidelines

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software