Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Propriedades Físicas do Semicondutor Bi2Te3

Thermoelectric Refrigerators (TEC Thermoelectric Cooling) are solid-state heat pumps used in applications where stabilization of temperature cycles or cooling below the room temperature are required. TEC are based on thermoelectric devices, and these in turn, are based on the Peltier effect, which is the production of a difference in temperature when an electric current is applied to a junction formed by two non-similar materials. This is one of the three thermoelectric effects and is a typical semiconductor junction phenomenon. The thermoelectric efficiency, known as Z thermoelectric or merit figure is a parameter that measures the quality of a thermoelectric device. It depends directly on electrical conductivity and inversely on the thermal conductivity. Therefore, good thermoelectric devices have typically high values of electrical conductivity and low values of thermal conductivity. One of the most common materials in the composition of thermoelectric devices is the semiconductor bismuth telluride (Bi2Te3) and its alloys. Peltier plates made up by crystals of semiconductor P-type and N-type are commercially available for various applications in thermoelectric systems. In this work, we characterize the electrical properties of bismuth telluride through conductivity/resistivity of the material, and X-rays power diffraction and magnetoresistance measurements. The results were compared with values taken from specific literature. Moreover, two techniques of material preparation, and applications in refrigerators, are discussed

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Guiando almas femininas: a educação protestante da mulher em impressos confessionais no Brasil e em Portugal (1890-1930)

This paper treats confessional printings as a non formal space for the female education. It reflects on the importance of the woman s role to the diffusion of Protestantism in general, and its Presbyterian trend in particular, besides commenting on the proliferation of printings at the First Republic and its relation with education. In this study, Brazilian Northeastern is seen as a relevant space to the diffusion of Protestantism in Brazil; especially on what concerns the relations between Rio Grande do Norte and Pernambuco. Thereby some fountains were fundamental, as the confessional printings, that is, newspapers, magazines, prospects and other materials recollected in archives located in Natal/RN and Recife/PE, and São Paulo. It was also provided a brief incursion on Portuguese confessional printings kept in Oporto, PT. New Cultural History was chosen as theoretic-methodological guide, franchising ways inside the history of book and reading with the help of concepts like Interdependence, Social Configuration (ELIAS, 1993, 1994) and Representation (CHARTIER, 1990), considering that the survey worked out culture-manufactured products that is, intentional materials. It is well known that publishing, or better, the dissemination of printed material used to be associated to Protestants missionary practices since Reform began and, as what concerns the investigated period, in Portuguese and Brazilian lands indistinctly. Printing material in general books, booklets, fragments, as well as the press itself played a central role in divulging reformed ideas, their social options and the means of being and intervening in the world. In this regard, the confessional printings established themselves as an educative, although non schooled, informal space, but, all considered, relevant, seen that they dialogue with another important demand of that social group: formal, literate education. Because it dealt with the diffusion of a printed culture supported by the written word, it required of that group a different modus operandi: formal education. The first letters schools at first, then the high schools later represented spaces established for the circulation of printing material in order that they should be read, divulged and comprehended. This survey intends at last to take a look at Protestantism which, in this context of self-affirmation, reserved a specific place to woman by working out a non formal educational proposal disseminated by printing material. Three models were highlighted in the reformed proposal: Christian education in itself, household education, whose references of motherhood and care towards the neighbor were present and, at last, education to the public space, with emphasis on the practice of teaching. This study also offers a brief dialogue between Brazil and Portugal because, when some periodic printing, book or something like that got to be published in one margin of the Atlantic Ocean, the other margin surely was affected by that feat, received it, divulged it, corroborating the argument in support of the circulation of these printings. It was not only the same language that survived in both maritime coasts; some protestant specificities also crossed out along that sea