AI, LA, ALI e AQUI: gramaticalização de um paradigma emergente no domínio funcional da especificação nominal

In the light of the Functional Linguistic Theory, in its North-American version (HOPPER, 1987, 1991, 1998, 2008, 2010; GIVÓN, 2001; LEHMANN, 2002; HOPPER; TRAUGOTT, 2003; FURTADO DA CUNHA; OLIVEIRA; MARTELOTTA, 2003, among others), the general objective of this research is to demonstrate, based on morphosyntactic and semantic-pragmatic properties, that AQUI (HERE), AÍ, ALI and LÁ (THERE) are part of an emerging paradigm in Brazilian Portuguese recently constituted and still developing of forms indicating specificity in indefinite noun phrases (NP). The data that make up the corpus of this research were collected in the following large Brazilian oral corpora: the Corpus Discurso & Gramática: a língua falada e escrita na cidade de Natal (FURTADO DA CUNHA, 1998), the Banco Conversacional de Natal (FURTADO DA CUNHA, 2010), the Projeto Variação Linguística no Estado da Paraíba VALPB (HORA, 2005) and the Projeto Variação Linguística Urbana na Região Sul do Brasil VARSUL (VANDRESEN, 2002). Firstly, the behavior of the specificity markings AQUI, AÍ, ALI and LÁ is described with respect to many factors of morphosyntactic and semantic-pragmatic nature: type of construction in which the markers appeared; existence or not of intervening material between the specificity marker item and the NP s nuclear noun; type of noun to which AQUI, AÍ, ALI and LÁ are linked; syntactic function of the specified SN; informational status of the NP to which the specificity markers AQUI, AÍ, ALI and LÁ are attached; occurrence of conversational implicatures (GRICE, 1982) in the context of use of these specificity markers. Next, a possible grammaticalization trajectory is outlined, according to which AQUI, AÍ, ALI and LÁ would had gone from an early spatial deictic indication to the specificity indication. The results point to the existence of forms with varying degree of emergence in this new paradigm of nominal specification, with AÍ being, probably, the item most grammaticalized, followed by LÁ, then ALI and AQUI, which permanence in the paradigm do not yet appear to be consolidated

A escola normal de natal (Rio Grande do Norte, 1908-1971)

The research aims to analyze Professor Education in Natal, Rio Grande do Norte-Brazil in the period of 1908 to 1971. The work falls under the theme History of Scholar Institutions as well as Professor Education. The research investigates the evolution of the so called Normal School, a school that aimed professor education. It was based on assumptions by works of Chartier (1990), Chervel (1990), Elias (1994), Nóvoa (1987), Schriewer (2000), amongst others. The research dealt with a great array of documents in different institutions such as Minutes, Public Instruction Management Reports, Laws, newspaper articles (from the newspaper A Capital, A Ordem e A República), magazines such as Pedagogium (1921-1940); all of which present in the Geographical and Historical Institute of Rio Grande do Norte in Brazil. In the State´s public archive it was possible to find a book called Livro de Honra (1914-1919) as well as class diaries and books that contained details related to Scholar group Inscriptions. In the Atheneu Memorial the Atheneu Congregation of Normal School (1897) document was analyzed. In the Kennedy Superior Institute the researcher analyzed the Professor Nominal Graduation Registry Book. The work proposes a comparative study regarding the genesis present in the Lisbon Primary Normal School and the ones situated in Natal. The analysis dealt with institutional meanings attributed by educators. Documents from The Portuguese National Library as well as the Lisbon Superior Education School were analyzed. In this in environment, it was possible to analyze documents such as Minutes, Books, Manuals, Internal Regiments related to Pedagogy. The study allowed acknowledging that these Normal Schools emerged from the same historical substrate and present consonance between the two countries regarding once both were associated with politicians, professors, doctors, hygienists and professionals evolved with education. It was also possible to acknowledge that there is a presence of a pedagogical discourse attached to the primary school universe and professor education. The Natal Normal School was present in different contexts and was consolidated as an institution that was responsible for the education and preparation of primary school teachers. The school was considered a locus where it was possible to produce and work with specific knowledge in a peculiar fashion. This knowledge provided the necessary support for professor education and was in accordance with the world´s professional pedagogical movement as well as ideas, discussions and reflections. This school was considered a space for pedagogical activities, professional affirmation allowing action reflection enabling professor representation as knowledge producers legitimating professor instruction

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Controle preditivo bilinear aplicado a um motor de indução

The present work is based on the applied bilinear predictive control applied to an induction motor. As in particular case of the technique based on predictive control in nonlinem systems, these have desperted great interest, a time that present the advantage of being simpler than the non linear in general and most representative one than the linear one. One of the methods, adopted here, uses the linear model "quasi linear for step of time" based in Generalized Predictive Control. The modeling of the induction motor is made by the Vectorial control with orientation given for the indirect rotor. The system is formed by an induction motor of 3 cv with rotor in squirregate, set in motion for a group of benches of tests developed for this work, presented resulted for a variation of +5% in the value of set-point and for a variation of +10% and -10% in the value of the applied nominal load to the motor. The results prove a good efficiency of the predictive bilinear controllers, then compared with the linear cases

Maximização da penetração da geração distribuída através do algoritmo de otimização nuvem de partículas

This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values

Projeto de um Transformador utilizado em uma Planta de Plasma

This work discusses the design of a transformer used in a plant plasma. This plant, which is being developed in UFRN, will be used in the treatment of waste. It consists basically of a radio frequency power supply and a inductive plasma torch. The transformer operates at the nominal frequency of 400 kHz, with 50 kW, allowing the adaptation of impedance between the power supply and torch. To develop the project, a study was done on the fabrication technologies and physical effects on the frequency of operation. This was followed by the modeling of this transformer. Finally, simulations and tests were conducted to validate the design

Caracterização de escovas de grafite e avaliação do seu desempenho em função da microestrutura

The electric can be converted into thermal, luminous, electromagnetic, and also in mechanical energy. In this context the electric engines plays a fundamental role, specially that they work very below of its nominal capacity, with consequent decrease load density. In industrial environment, these characteristics of work of DC engines had also generated an extreme consumption of coal brushs and attack in the commutator reducing the useful life of the engine and increasing maintenance demand and cost. The general objective of the present work is to study the influence of the granulometry of the coal brush used in DC engines with the resistance to the consumption of the same ones, as well as in the performance presented by the commutator of the engine. Additionally, determining the measurable and not measurable profits when the brush used is adjusted to the application. The brushes had been produced by an industry of the sector and tested in industrial environment to evaluate their performance and consumption. Preliminary results evidence a substantial improvement in the performance of these brushes in function of its microstructure and the application in which it is used

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP

Desenvolvimento e avaliação de padrão de torque para calibração de torquímetros em três faixas de medição

The continuous development of instruments and equipment used as tools or torque measurement in the industry is demanding more accurate techniques in the use of this kind instrumentation, including development of metrological characteristics in torque measurement. The same happens with the needs in calibration services. There is a diversity of methods of hand torque tools in the market with different measuring range but without complaining with technical standards in terms of requirements of quality and reliability. However, actually there is no choice of a torque measuring standard that fulfils, with low cost, the needs for the calibration of hand torque tools in a large number of ranges. The objective of this thesis is to show the development and evaluation of a torque measuring standard device with a conception to allow the calibration of hand torque tools with three levels of torque with an single instrument, promoting reduction of costs and time in the calibration, also offering reliability for the evaluation of torque measuring instrument. To attend the demand in the calibration of hand torque tools it is necessary that the calibration laboratories have a big collection of torque measuring standards, to fulfills the needs of the costumer, what is very costly. The development of this type of torque measuring standard revealed a viable technique and economically making possible the calibration of hand torque tools in different nominal ranges through a single measurement system versatile, efficient and of easy operation

Conversão do metano via oxicloração em reator de leito fixo utilizando catalisador do tipo CuCl2/SiO2

Supported catalysts of CuCl2 on sílica were used in the methane oxychlorination reaction. The materials were synthesized by the ion exchange technique in a basic solution, using a copper-ammonia complex with 3 and 6 % of nominal copper loading. The materials where characterized by thermogravimetry (TG), X-ray Fluorescence Spectroscopy (XRF), Temperature Programmed Reduction (TPR), Scanning Electron Microscopy with X-ray microanalysis (SEM/EDS), BET specific area and pore distribution. The characterization confirms the presence of copper on the support surface, concluding that the ion exchange technique was adequate in the catalyst synthesis. For the reaction test, an oxychlorination bench scale unit was employed. The tests were carried at 673 and 773 K. The results showed the influence of temperature and catalyst copper content on the oxychlorination of methane reaction

Aí marcador de especificidade de SN indefinidos: um estudo funcionalista com implicações para o ensino

This body of work aims to describe and analyze the behavior of the Aí specificity marker of indefinite Noun Phrases (NP), one of the many functions this linguistic item is developing in contemporary Brazilian Portuguese. From the Functional Linguistic theory perspective, the North American declivity, this project intends to outline the possible grammaticalization trajectory taken by the Aí specificity marker. It will be followed from its function as a spatial deitic up to its integration of indefinite NP, and the action of the fundamental principles of the theory, such as iconicity and informativity, will be observed on the use of this item. Following this, Aí specificity marker behavior will be described in respect to various linguistic and social factors: type of text where the occurrence is encountered, language modality in which the latter is produced, syntactic function developed by the NP specified by Aí , the existence or lack of material intervening between Aí and the NP nuclear noun, informational status of the NP adjugated to Aí , and finally, sex, education and age of the speaker. The occurrence of conversational implicatures will also be verified (GRICE, 1982) within the contexts of Aí specificity marker use. Reflections on the teaching of grammar will be made, as well as on the possibility and validity of working with noun phrase specificity markers in elementary and high school Portuguese language classes. The data used in this research project stem from Corpus Discurso & Gramática A língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998), and from Corpus Discurso & Gramática A língua falada e escrita na cidade do Rio de Janeiro (VOTRE; OLIVEIRA, 1995)

A interpretação dos sintagmas nominais com adjetivos atributivos por alunos de inglês instrumental

This present work has as objective to analyze the interpretation of the syntactic and semantic meaning performed by third graders in the nominal groups (NGs) with attributive adjectives in the English language in a text of the final exam in the ESP (English for Specific Purposes) discipline. The corpus is made up of 30 exams of two classes from a third grade institution of the biomedical area, corresponding to the basic and advanced levels of the second term in 2006. The text has 24 NGs of different lexical content, a total of 27 NGs in the whole text summing up to 810 analyzed occurrences. The analysis is carried out at the morphologic, syntactic and semantic levels using as theoretical background the traditional and functional grammars (QUIRK et al, 1985; CELSE-MURCIA et al, 1998; TUCKER, 1998), in their semantic aspects, the Semantics (FRAWLEY, 1992) and the Cognitive Linguistics (TAYLOR, 2002). We concluded that the main difficulties were due to the lack of vocabulary and to the use of mother tongue strategies instead of using the top-down strategies for reading a text in English to compensate this gap. We also observed that even when the vocabulary was known, there were difficulties in establishing the semantic and syntactic relations between modifier and noun head. We suggested improvements for the teaching of reading English texts at the third grade grounded in the obtained results such as a more comprehensive study of the several different morphologic and syntactic structures of the NGs with premodifiers and their semantic consequences, an approach of the morphologic, syntactic and semantic aspects of the NGs and the use of both top-down and bottom-up strategies when reading a NG in the English language

A relação gramatical objeto direto : implicações para o ensino de língua materna

This paper attempts to investigate the discourse manifestations of the grammatical relation direct object with respect to the syntactic, semantic and pragmatic properties that underlie this element. The research adopts theoretical orientation of the functionalism from North American and Brazilian schools inspired in Givón (1995, 2001), Hopper and Thompson (1980), Chafe (1979), Furtado da Cunha, Oliveira, Martelotta (2003) inter alia. From functionalism, the research uses principles of iconicity, markedness and informativity and it analize categories of transitivity, grounding and animacy. This research is anchored in prototype model (TAYLOR 1995); construction grammar model (GOLDBERG 1996, 2002). Both theoretical orientations share the view that language is a malleable living organism subject to socio-cultural context. Grammar is then the result of created, maintained, and systematized linguistic patterns developed from and used for language use. According to a functional linguistics and cognitivist linguistics verbs are stored in the speakers lexicon in syntactic-semantic frames which are more frequent. These frames carry information concerning obligatory and optional arguments and the semantic roles these arguments take in the clause. The analysis focuses on the semantic type of the verbs and its relationship with the argument encoded as a direct object observing the aspectual nature of verbs. Direct objects are classified according to their morphology (lexical or pronominal noun phrase), semantic role, informational content and animacy. This study discusses pedagogical implications with relation to how the grammatical concepts touched on this paper are treated in school textbooks. The empirical data come from Corpus Discurso & Gramática: a língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998). This corpus is composed of texts that contain spoken and written modalities. These modalities are in turn organized according to different types: personal narratives, retold narrative, description of preferred place, procedural place, procedural description and report on argumentation. The sample data totals 40 texts produced by four language consultants of the last graduation date. The paper shows that the same syntactic structures (formed through Subject-Verb-Object) correspond to different semantic-pragmatic structures in relation to specific communicative purposes even verb is an event, process or state. The argument structure are not aleatory but are related to experience; that is the way humans conceptualize the world and talk about it

Representações discentes sobre a afetividade nas aulas de inglês de uma escola técnica

This work has risen from the researcher s pedagogical practice at a technical school in Natal, and it aims to observ how affectiveness is noticed by the students in their English classes, since we can have an idea of technicist teaching, which foccus on the acquisition of technical abilities. As cognition and affectiveness are considered indivisible elements in this research, we tried to identify the linguistic signs that express the students representations about affectiveness in their English classes. We used the Systemic Functional Linguistics approach to study the Ideational metafunction of Halliday (1994), by means of the transitivity system, to show how the clauses are used to illustrate these representations, and the interpersonal metafunction, that deals with the relationship between the teacher and the students. We tried to identify the most common processes (HALLIDAY, 1994) mentioned by the 68 students who participated in this work. We used learning narratives (BARCELOS, 2006) submitted to Wordsmith Tools computing program (SCOTT, 2009), whose results indicate the most frequent lexical items found in their narratives. The lexical choices seem to indicate that affectiveness is noticed as a composing element of the English classes in that school. There are representations of interacting classes, where the students needs are considered. These representations are built in the relationship of the students and the teacher, and they are grammatically realized by means of the polarity adjunct no , the intensity adjunct very , and the nominal group the teacher . The relational and mental processes (be) and (like) are the most used in their narratives, and we also observe that affectiveness and disponibility to help the students are considered the most important attitudes in their representations. The Appraisal system is used to analise the choices related to the attitudes and judgement of the students, that show appreciation for interacting classes, but there is still authorithary berhavior from the teacher in the English classes

Abordagem cognitiva da construção deverbal x-dor: contribuições para o ensino do português

This work analyzes deverbal nominalizations with the sufix dor in Brazilian Portuguese, under the perspective of Cognitive Linguistics, more specifically, the Construction Grammar. The aim is to determine the general features of interpretation that characterize this deverbal construction and its use in formal writing. Based on the cognitive assumption that grammatical structure is motivated, explained, and determined by the structure of cognitive patterns, created from our experience in the world, and by the communicative function of language, the dor deverbal is treated as a polysemic grammatical construction. In the composition of V+dor, the relation rootsuffix is focused, through a characterization of the syntactic-semantic nature of the verb and the values of the suffix. Among the different values conventionally related to the XDOR construction, the agentive is considered as the prototypical sense. The relation between the other values and the prototype is explained by cognitive abilities and discourse motivations. The deverbal construction X-DOR is also interpreted as a valency noun that, like an action nominal, retains the argument structure of the deriving predicate. It is also intended to demonstrate the textual function of this deverbal construction, as a device of information condensing and anaphoric recovery. The data were taken from Veja magazine and the approach is qualitative (explicative), with quantitative support