Contribuição ao desenvolvimento de ontologias para processos petroquímicos : estudo de caso em uma planta DEA

In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Um modelo de unidade de medida inercial utilizando três acelerômetros triaxiais

No espaço tridimensional, um corpo rígido qualquer pode efetuar translações e ou rotações em relação a cada um de seus eixos. Identificar com precisão o deslocamento realizado por um corpo é fundamental para alguns tipos de sistemas em engenharia. Em sistemas de navegação inercial tradicionais, utilizam-se acelerômetros para reconhecer a aceleração linear e giroscópios para reconhecer a velocidade angular registrada durante o deslocamento. O giroscópio, entretanto, é um dispositivo de custo mais elevado e com alto consumo de energia quando comparado a um acelerômetro. Essa desvantagem deu origem a pesquisas a respeito de sistemas e unidades de medidas inerciais que não utilizam giroscópios. A ideia de utilizar apenas acelerômetros para calcular o movimento linear e angular surgiu no início da década de 60 e vem se desenvolvendo através de modelos que variam no número de sensores, na maneira como estes são organizados e no modelo matemático que é utilizado para derivar o movimento do corpo. Esse trabalho propõe um esquema de configuração para construção de uma unidade de medida inercial que utiliza três acelerômetros triaxiais. Para identificar o deslocamento de um corpo rígido a partir deste esquema, foi utilizado um modelo matemático que utiliza apenas os nove sinais de aceleração extraídos dos três sensores. A proposta sugere que os sensores sejam montados e distribuídos em formato de L . Essa disposição permite a utilização de um único plano do sistema de coordenadas, facilitando assim a instalação e configuração destes dispositivos e possibilitando a implantação dos sensores em uma única placa de circuito integrado. Os resultados encontrados a partir das simulações iniciais demonstram a viabilidade da utilização do esquema de configuração proposto

Adolescentes e jovens e suas bases de apoio :relações de amizade como suporte social no enfrentamento à violência

The purpose of this work is to map the family and community social supports for adolescents and young students from Bom Pastor Distric, West Zone of Natal/RN, as well as to describe how such resources are used by these individuaIs in that community. Social support refers not only to formal activities or organizations, but also to spontaneous or informal forms of support - friendship and solidarity nets available in the community, affective relations that are meaningful in the lives of children and young people. Our discussion is based on a research performed with 382 adolescents and young students from Jean Mermoz Public School (students from 5th to 11th grades, aged 13 to 14). We emphasized the situations of violence derived from family or community spheres faced by these students. In relation to this specific aspect, we observed the participants more frequently look for help from the informal social supports, mostly from their friends, which indicates that the formal ones are not considered to be effective instruments for social assistance. The search for informal social supports shows the relations informally established in the streets (for instance when they look for help from friends, rei atives or neighbors) have more effect and play an important role in which there are values and affections exchange. Thinking the strengthening of these social links is of extreme importance and leads to the weakening of the hegemonic logics focused on the production of subjects as private identities, and to the amplification of an ethics committed to the disassembly of a sociability anchored to fear, impotence, intolerance, discrimination, and reduction of spaces for circulating and confronting mechanisms of social exclusion. It is crucial that we concentrate our attention to building friendship as a system of reciprocity and affective exchanges, as a space for political actions and production of forms of lives that are potent against social anesthesia

Dinâmica sazional de fungos micorrízicos arbusculares (Glomeromycota) em cerradão e brejo de altitude na Chapada do Araripe, CE

Arbuscular mycorrhizal fungi (AMF) are obligatory symbiotic organisms that associate with roots of a large number of plant taxa, and are found in all terrestrial ecosystems. These fungi promote greater tolerance to environmental stresses to associated plant, favoring the establishment of plant communities, especially where soil fertility is a limiting factor, as in the Caatinga, an exclusively Brazilian domain that has been focus of research due to its great biodiversity that can help clarify the history of vegetation in South America. Because of the ecological importance of AMF, the limited number of jobs and the potential diversity of the Caatinga, this work aims to inventory the diversity and determine AMF communities in areas with different faces occurrent in FLONA Araripe, Ceará (CE). The sample collection occurred in four periods at the beginning and end of the dry season (August and December 2011, respectively) and rainy (February and June 2012, respectively) in an area of marsh and woodland altitude of the Araripe, Crato, CE. The glomerosporos were extracted by wet sieving and centrifugation in water and sucrose (50%) mounted between slide and coverslip using PVLG and PVLG + Reagent Melzer. In total, we found 46 species of AMF distributed in eight families and 16 genera: Acaulospora (6), Ambispora (1), Cetraspora (2), Dentiscutata (5), Fuscutata (2), Gigaspora (6), Glomus (13) Intraornatospora (1), Kuklospora (1), Orbispora (1), Paradentiscutata (1), Quatunica (1), Racocetra (1), Scutellospora (2), Septoglomus (2) and a new genus. analysis showed that ecological each area of study has its own seasonal dynamics, with an area of woodland with a greater diversity of species throughout the year, while the marsh elevation showed greater variation in species found among the collection periods, showing that vegetation and rainfall has strong influence on the seasonal dynamics of AMF, as well as the availability of nutrients and soil pH so

Diversidade de paronellidae (collembola, arthropleona, entomobryoidea) no nordeste brasileiro, com ênfase em áreas úmidas da caatinga

Paronellidae is among the most diverse and distinctive components of epiedaphic Collembola in tropical countries. However, only 15 species of the family were recorded in Brazil, and only two of them were record in northeast region of the country. This condiction is clearly related to low sampling efforts and lack of specialists working with the group. Due to this reality, this work aimed to study the Paronellidae fauna, under a taxonomic point of view, in six distinct environments in Northeastern Brazil (from Alagoas, Bahia, Ceará, Piauí and Paraíba states), five areas of Caatinga and one from Atlantic Rain Forest biome. Collections were made during the rainy season on each area. The specimens were analyzed under stereomicroscope and mounted in glass slides for microscopy. The specimens identified as Paronellidae had their occurrence recorded and five new species were described. An identification key to the brazilian genera of the family was also prepared. Twelve species of Paronellidae were recorded for the first time to Brazil: Campylothorax mitrai; Lepidonella. sp. nov. 1; Lepidonella sp. nov. 2, Lepidonella sp. nov. 3, Lepidonella sp. nov 4, Lepidonella sp. nov. 5; Dicranocentruga sp. Nov. 1; Dicranocentruga sp. Nov. 2; Dicranocentruga sp. Nov. 3; Paronella sp. nov.1; Serroderus sp. nov.1 and Trogolaphysa. sp. 1, where C. mitrai, Lepidonella. sp. nov 1, Dicranocentruga sp. nov 1, Dicranocentruga sp. nov 2 and Dicranocentruga sp. nov 3 were described. Serroderus and Dicranocentruga genera were recorded for the first time to Brazil. The description of Lepidonella sp. nov 1 also represents the first description of a species of the genus for the country. The data presented show a high potential species richness to Paronellidae, not only in the northeast region, but as in Brazil. In fact, with the records presented in this work, the number of recorded species of Paronellidae in the country increased by 80%. The study of this particular fauna may direct environmental conservation policies, especially in areas of Caatinga

Caracterização da comunidade bentônica do recife raso de Pirangi/RN, Brasil, e avaliação do seu processo de estruturação sob impacto de pisoteio

Despite being areas of socioeconomic and ecological importance, the reef environments in northeastern Brazil have been suffering with cluttered tourism impacts, such as trampling, activity that leads to decrease in abundance of organisms, especially benthic, and loss of biodiversity. The objectives of this study were 1) to characterize the benthic community in the shallow sandstone reef of Pirangi/RN, identifying patterns of zonation, and 2) evaluate its process of structuring under different degrees of impact of trampling, providing information to the proper use of the area. Data on abundance of organisms, the percentage coverage of the substrate and physic-chemical parameters were collected. The formation of two zones on the reef was observed: one that considers submerged areas and ones with shorter time of exposure, lower roughness and higher heterogeneity in the coverage of the substrate, with a predominance of sand, foliose algae, rodolit, being related to organisms such as gastropods, crabs and sea-urchin; the second zone comprises areas with longer time of exposure, greater roughness and predominance of bedrock uncovered, being associated with organisms such as barnacles, gastropods, bivalves and crabs. It is concluded that the studied reef presents its own zonation pattern, influenced by both the time of immersion and the substrate characteristics, such as roughness and type of coverage. To answer the second objective of this study, four experimental blocks were mounted on each of the three areas of different intensities of trampling, containing the following treatments: control (isolated from trampling), shaved isolated, trampling and shaved trampling, with data collection by 11 months. The data in abundance, diversity indices and living coverage of the substrate were compared between areas and treatments. The results showed that at the trampling areas, at the end of the experiment, differences were observed between the intensities of the impact, where higher values of abundance and richness of mobile fauna and richness of live coverage (ANOVA, p <0.05) were found in the area of higher trampling intensity. For fauna withdrawal of trampled scraped treatments, it was observed in the area of greatest impact that the abundance of small benthic invertebrates is more than three times smaller than that at the area of intermediate trampling (ANOVA, p <0.05). Initial isolated areas and final ones differed only as to the percentage of live coverage, with an increase of 35% at the end of this experiment. As for the areas that were completely scraped and isolated at the end of the experiment was observed an increase in the percentage of live coverage of 11.11% compared to the initial amount in the area of intermediate impact and 37.5% in the area with greater impact, indicating recovery of the area. It is suggested that the current use of the reef of Pirangi be reviewed, with a decentralization of trampling, or a decrease in visits, so that it does not occur at high intensities

Pistas visuais no reconhecimento intra e interespecífico em duas borboletas miméticas impalatáveis

Duas espécies de borboletas miméticas Heliconius erato e Heliconius melpomene apresentam coloração similar. Tal similaridade pode atuar confundindo o reconhecimento de seus co-específicos no momento da escolha de parceiros sexuais. As duas espécies possuem um conjunto de variações sutis na cor de suas asas que são compartilhadas por ambas espécies, como os pontos vermelhos encontrados acima da faixa amarela. Em H. erato variações na cor de suas asas são exclusivas da espécie como os red raylets e pontos amarelos na região distal da asa posterior. Acredita-se que tais variações fenotípicas auxiliem no reconhecimento de seus co-específicos, para tanto, o presente estudo tem por intuito verificar se as duas espécies envolvidas na análise reconhecem seus co-específicos. Experimentos com modelos que contemplaram variações sutis foram montados e apresentados aos machos de H. erato e H. melpomene. Em cada experimento foi verificado a probabilidade relativa de aproximação do macho ao modelo. O teste de likelihood indicou que as diferenças sutis encontradas nos padrões de asas de H. erato e H. melpomene podem atuar como pistas de reconhecimento de indivíduos da mesma espécie. Sendo que a espécie H. erato pode ser considerada um discriminador mais refinado no reconhecimento, e ambas as espécies selecionaram modelos que possuem variações médias, indicando seleção normalizadora para a escolha do padrão de asa. Podemos concluir, que a cor e, principalmente, os padrões sutis na variação da cor são utilizados como um sinal usado por borboletas no reconhecimento de seus co-específicos.

Duplicação rápida de prótese total: passo-a-passo

This study presents a simple, fast and low cost technique for fabrication new conventional dentures from the duplication of old prosthesis in use by the patient. Colorless acrylic resin was poured into the moulds obtained by duplication of prosthesis. With the replicas obtained a functional impressions using polyether should be performed and they are stabilized with occlusal registration in acrylic resin. The molds need to be castings and mounted on an semi-adjustable articulator. The artificial teeth are positioned with the assistance of a guide made condensation silicone to reproduce the positioning of the teeth of the old prosthesis and fixed with wax 7. After approval of the teeth on the trial in wax, without adjustment of the planes, the prosthesis may be processed in the laboratory. After occlusal adjustment in the articulator the same can be installed.

Contribuição ao desenvolvimento de ontologias para processos petroquímicos : estudo de caso em uma planta DEA

In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.