Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Desenvolvimento de bioblendas poliméricas a partir de gelatina bovina e de tilápia com amido de milho

The natural raw materials acquired special importance beside the mineral raw materials with the need for using alternative sources to oil, because they can be used to produce biopolymers. Gelatin, produced from the denaturation of collagen, and starch, an abundant polysaccharide in various plants, are examples of biopolymers which have several technological applications, especially in films. The objective of this work is to produce polymeric bioblends with gelatin and corn starch using two types of gelatin: commercial bovine gelatin and gelatin produced from mechanically separated flesh of tilapia (Oreochromis niloticus). For the extraction of tilapia gelatin 3 distinct pretreatments, followed by extraction in distilled water under heating were performed. The properties of gelatin extracted were similar to bovine gelatin, and the differences can be explained by the difference in extraction processes and sources. Blends of commercial gelatin and starch were produced in an internal mixer from a Haake torque rheometer, to study the behavior of the gelatin mixture with starch, thus, the same compositions were processed by twin screw extrusion, to define the mixing parameters. Subsequently, the extrusion of blends of tilapia gelatin and corn starch was carried out in the same twin screw extruder. The physico-chemical, rheological and morphological properties of the blends with thermoplastic starch and gelatin were studied. It was found that various properties vary linearly with increasing concentration of the components. The blends produced are immiscible, and among the two gelatins, tilapia gelatin showed a better interfacial adhesion with the corn starch. Regarding the morphology, gelatins formed the dispersed phase in all compositions studied, even in compositions rich in starch. Can be concluded that the procedure for tilapia gelatin extraction is feasible and advantageous, and the increasing in its scale to a reactor of 30 liters is possible, with a satisfactory yield. The bioblends of bovine gelatin/corn starch and tilapia gelatin/corn starch were successfully produced, and the processing conditions were appropriate

Herdabilidade de preditores do risco cardiovascular

genetic and environmental factors contribute to the development of cardiovascular risk and that influence can be differentiated by factors characteristic of each population, age and sex. Aim: To investigate the heritability of anthropometric and biochemical markers as predictors of cardiovascular risk in men and women of different age groups, using the method of twins. Methods: A sample of 88 subjects and of these 52 children and adolescents (08-17 years old) 32 monozygotic (20 female and 12 male) and 20 dizygotic (12 female and 08 male) and 36 adults (18-28 years age) 24 monozygotic (08 female and 16 male) and 12 dizygotic (06 female and 06 male), living in the metropolitan region of Natal / RN, Brazil. Anthropometric measures were taken as the height, body mass, waist circumference (WC), sum of skinfolds (ΣDC), fat percentage CUN-BAE, BMI and conicity. Biochemical markers analyzed were: fasting glucose (GLU), total cholesterol (COL), HDL-C, LDL-C and triglycerides (TG). After processing the data the index of heritability (h2) = (S ² MZ) / S ² DZ (DZ S ²) X100 was applied disaggregated by sex and age. Results: The variables showed differential heritability of behavior for men and women, depending on age. The variables with the highest heritability values were ΣDC, GLU, HDL, TG, in men and BMI, WC, ΣDC, GLU, HDL-C and TG in women. And more influenced by the environment variables were: body mass, BMI, Chol, LDL-C in men; body mass and LDL-C in women. Conclusion: Differences index of heritability by gender for cardiovascular risk predictors may assist in planning specific intervention strategies according to gender and stage of life of that individual. It is from the level of environmental influence that can run interventions for changes of components related to cardiovascular risk

Caracterização comportamental endócrina das fases ontogenéticas de sagüi comum (Callithrix jacchus)

The use of animal models in biomedical research is ever increasing. Models that use primates might also have advantages in terms of low maintenance costs and availability of biological knowledge, thereby favoring their use in different experimental protocols. Many current stress studies use animal models at different developmental stages since biological response differs during ontogeny. The aims of this study were to perform a detailed characterization of the developmental stages of common marmosets (Callithrix jacchus), a very important animal model used in biomedical research. Ten subjects, 6 females and 4 males, were followed from birth to initial adult age (16 months). Behavioral and fecal collection for measurement of adrenal (cortisol) and sex (progesterone, estradiol and androgens) hormones took place twice a week during the first month of life and once a week for the remainder of the study. Behavior was observed for 30 minutes in the morning (0700-09:00h) and afternoon (12:00-14:00h). Behavioral profile showed changes during ontogeny, characterizing the 4 developmental stages and the respective phases proposed by Leão et al (2009).. Differentiation of developmental stages was considered using the onset, end, change and stabilization of the behavioral profile parental care (weaning and carrying), ingestion (solid food), affiliation (social grooming) and autogrooming, agonism (scent marking and piloerection) and play behavior and endocrine profile. Infant weaning and carrying terminated within the infantile stage and the peak of solid food ingestion was recorded in the infantile III phase. Receiving grooming was recorded earlier than grooming performed by the infant and autogrooming. The first episode of scent marking was recorded in the 4th week and it was the least variable behavior, in terms of its onset, which, in almost all animals, was between the 5th and 7th week of life. Solitary play and play with the twin started around the 7th week and play with other members of the group started 8 weeks later. Sex hormone secretion started to differ from basal levels between the 21st and 23rd week of life, in males and females, suggesting that puberty occurs simultaneously in both sexes. Basal cortisol, even at an early age, was higher in females than in males. However, cortisol was not correlated with the juvenile stage, as expected, since this stage corresponds to the transition between infancy and adult age and most behaviors are intensified by this time. The behavioral and endocrine profile of subadult animals did not differ from that of the adults. These results provide more detailed parameters for the developmental process of C. jacchus and open new perspectives for the use of experimental approaches focused on the intermediate ontogenetic phases of this species

Padrão de atividades e de interações sociais de animais juvenis em dois grupos selvagens de Callithrix jacchus

The juvenile period represents the developmental phase between weaning and sexual maturity. Weaning occurs when the youngster does not receive direct care from the caretakers anymore. Individuals in the species Callithrix jacchus live in groups composed by the reproductive pair and successive twin sets. Cooperative care is the rule. Infants are weaned early, and from then on, food is provided by the adults in the group. These animals present high levels of social interactions, through play, grooming and social contact. During infant age, the twin becomes the main partner. There are few studies about the juvenile period, especially on Callithrix gender. The objective of this study was describing the pattern of activities and social interactions of four sets (one single and three twin sets) during juvenile phase in two Callithrix jacchus groups. We used instantaneous and continuous focal sampling for juveniles and scan sampling for adults behavioral recordings. Juveniles presented the same behavioral pattern as the adults relating the activity budget, in particular, foraging along the months. The composition of the diet was the same as that of the adults. Food transfer ended along the juvenile period. Social play as much as grooming were important socializing activities for the juveniles. The young individuals in the group were the main partners in social play, specially the twin. Adults were the main partners in grooming interactions. Scent marking differed between twins in the male/female sets, the female presenting the highest levels of marking. The juveniles were independent from adults in foraging activity. Social interaction varied according to group composition, but in general, interacted more with the twin and with the youngsters (infants and subadults), except in grooming. Even presenting many similarities, juveniles showed some differences between genders, which indicates the differentiation in behavior towards reproductive strategies early in the juvenile period

Sobre formas e processos: projeto de um condomínio de casas a partir de princípios da gramática da forma

With the intention of studying and developing the design process based on a specific methodology, the object of this work is to present the design of a gated condominium community in Natal based on the application of principles of shape grammar, used in their design process. The shape grammar is a design method developed in the 1970s by George Stiny and James Gips. It is used for the analysis of the project as well as for its synthesis, with the goal of creating a "formal vocabulary" through mathematical and/or geometrical operations. Here, the methodology was used in the synthesis of the design process, through the relationship between formal subtractions and the houses’ architectural planning. As a result, five dwellings configurations were proposed, each one different from the other with respect to their shape and architectural programming, distributed in three twin groups, which are repeated until the final total of nine architectural volumes. In addition to studies of the condominium’s ventilation and the buildings’ shading simulations, studies of spatial flexibility and acoustic performance were also performed. The mapping of the design process, one of the specific objectives of the dissertation, was composed not only by the record of formal constraints (the preparation and application of rules), but also by physical, environmental, legal and sustainability aspects in relation to, on one hand, the optimization of the shading and passive ventilation for hot and humid climates, and, on the other hand, the modulation and rationalization of the construction.

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Desenvolvimento de bioblendas poliméricas a partir de gelatina bovina e de tilápia com amido de milho

The natural raw materials acquired special importance beside the mineral raw materials with the need for using alternative sources to oil, because they can be used to produce biopolymers. Gelatin, produced from the denaturation of collagen, and starch, an abundant polysaccharide in various plants, are examples of biopolymers which have several technological applications, especially in films. The objective of this work is to produce polymeric bioblends with gelatin and corn starch using two types of gelatin: commercial bovine gelatin and gelatin produced from mechanically separated flesh of tilapia (Oreochromis niloticus). For the extraction of tilapia gelatin 3 distinct pretreatments, followed by extraction in distilled water under heating were performed. The properties of gelatin extracted were similar to bovine gelatin, and the differences can be explained by the difference in extraction processes and sources. Blends of commercial gelatin and starch were produced in an internal mixer from a Haake torque rheometer, to study the behavior of the gelatin mixture with starch, thus, the same compositions were processed by twin screw extrusion, to define the mixing parameters. Subsequently, the extrusion of blends of tilapia gelatin and corn starch was carried out in the same twin screw extruder. The physico-chemical, rheological and morphological properties of the blends with thermoplastic starch and gelatin were studied. It was found that various properties vary linearly with increasing concentration of the components. The blends produced are immiscible, and among the two gelatins, tilapia gelatin showed a better interfacial adhesion with the corn starch. Regarding the morphology, gelatins formed the dispersed phase in all compositions studied, even in compositions rich in starch. Can be concluded that the procedure for tilapia gelatin extraction is feasible and advantageous, and the increasing in its scale to a reactor of 30 liters is possible, with a satisfactory yield. The bioblends of bovine gelatin/corn starch and tilapia gelatin/corn starch were successfully produced, and the processing conditions were appropriate