Uma contribuição ao estudo das categorias internas e de sua proliferação em redes ARTMAP

ART networks present some advantages: online learning; convergence in a few epochs of training; incremental learning, etc. Even though, some problems exist, such as: categories proliferation, sensitivity to the presentation order of training patterns, the choice of a good vigilance parameter, etc. Among the problems, the most important is the category proliferation that is probably the most critical. This problem makes the network create too many categories, consuming resources to store unnecessarily a large number of categories, impacting negatively or even making the processing time unfeasible, without contributing to the quality of the representation problem, i. e., in many cases, the excessive amount of categories generated by ART networks makes the quality of generation inferior to the one it could reach. Another factor that leads to the category proliferation of ART networks is the difficulty of approximating regions that have non-rectangular geometry, causing a generalization inferior to the one obtained by other methods of classification. From the observation of these problems, three methodologies were proposed, being two of them focused on using a most flexible geometry than the one used by traditional ART networks, which minimize the problem of categories proliferation. The third methodology minimizes the problem of the presentation order of training patterns. To validate these new approaches, many tests were performed, where these results demonstrate that these new methodologies can improve the quality of generalization for ART networks

Otimização do fresamento de roscas internas com a técnica de interpolação helicoidal

In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime

Efeitos da simpaticotomia endoscópica sobre as artérias carótidas e vertebrais na terapêutica cirúrgica da hiperidrose primária

Analisar, em pacientes submetidos a simpaticotomia videotoracoscópica para tratamento da Hiperidrose Primária (HP), as conseqüências hemodinâmicas da desnervação vascular das artérias carótidas e vertebrais após a trans-secção cirúrgica da cadeia simpática torácica (simpaticotomia), através da mensuração de parâmetros ultra-sonográficos. Método: Vinte e quatro pacientes portadores de HP submetidos a quarenta e oito simpaticotomias torácicas endoscópicas foram avaliados através da mensuração da velocidade de pico sistólico (VPS), velocidade de pico diastólico (VPD), índice de pulsatibilidade (IP) e índice de resistência (IR) nas artérias carótidas comuns, internas e externas, além da artéria vertebral bilateralmente usando o eco-doppler duplex scan. As avaliações foram realizadas antes da intervenção cirúrgica e trinta dias após o procedimento. O teste de Wilcoxon foi usado na análise das diferenças entre as variáveis antes e depois da simpaticotomia. Resultados: A simpaticotomia no nível de T3 foi a trans-secção mais realizada (95,83%), seja isoladamente (25%) ou associada a T4 (62,50%) ou a T2 (8,33%). Houve aumento significativo no IR e no IP da artéria carótida comum bilateralmente (p<0,05). A VPD da artéria carótida interna diminuiu em ambos os lados (p<0,05). A VPS e a VPD da artéria vertebral direita também aumentaram (p<0,05). Achados assimétricos foram observados, de modo que artérias do lado direito foram as mais freqüentemente afetadas. Conclusões: Alterações hemodinâmicas foram observadas nas artérias vertebral e carótida após simpaticotomia para tratamento de HP. VPS foi o parâmetro mais freqüentemente alterado, principalmente nas artérias do lado direito, representando alterações assimétricas significantes nas artérias carótida e vertebral. Entretanto, são necessárias pesquisas subseqüentes para verificar se essas alterações são definitivas ou temporárias, uma vez que as inferências clínicas somente terão validação se as alterações forem permanentes

Gestão Social em Empreendimentos Econômicos Solidários: uma abordagem no Oeste Potiguar

The central research question was to search for data to ratify the theory and discourse of the so-called practitioners of economic solidarity, by defending the substantive rationality should guide the principles of economic solidary, designing the space economy incidental and not the primacy of relations in determining social as well, reflecting the predominance of dimensions of social management in administrative practices of ESS's. For both analyzed the theoretical dimensions of social management - sociopolitical, economic, organizational and environmental - manifested in organizational practices supportive of economic organization Potiguar West. For the success of the research realized the triangulation involving a combination of quantitative and qualitative methodological approaches. At first the research will use a quantitative approach, from the cluster analysis, to verify the behavior of the sample chosen for this study. In the second stage of the qualitative study was carried out focus group technique (FLICK, 2002) for further analysis of the dimensions of social management on organizational practices supportive of economic organization, related to the principles of Solidary Economy, established in a quantitative approach. In quantitative analysis, the socio-political dimension, it was clear that the more equity instruments of internal and external, from the purposeful living in public spaces, the best monetary results. Another point worth stressing concerns the economic dimension, with the practice reciprocity prevailing in market. Thus, the qualitative approach was possible to understand the processes of exchange of product or service. Rural enterprises surveyed in the allocation of the agro-ecological products have the following scale of priority, sequentially: self-consumption (domestic), market and exchange. The research leads to the fact that training and practices that enhance the socio-political dimension (knowledge, empowerment, sense of belonging) become the guiding principle for the strengthening of the social management in the context of other dimensions, leading to gains sociopolitical, economic, organizational and environmental. Despite the weaknesses found in the organizational dimension and environment, both in a quantitative as in qualitative, we determined that the practices of ESS's Potiguar West incorporate predominantly elements of social management and economic solidarity, with a preponderance of substantive rationality in the primacy of the instrumental. Finally, research has brought information that the participants of the ESS's do not give the money economy primacy in determining social relations, which in turn leads to the confirmation that, in practice the solidarity economy, prevailing the dominance of substantive rationality, as a guide for organizational practices

As pessoas na organização e o (re)alinhamento estratégico: o modelo de gestão da Alesat combustíveis em Natal/RN

Este trabalho consiste num estudo de caso na empresa Alesat cujo objetivo geral foi compreender o modelo de gestão de pessoas adotad por uma empresa norteriograndense à luz do modelo estratégico de gestão de pessoas. O estudo baseouse na literatura de Albuquerque (2002); Ashton, Haffenden e Lambert (2004); Fischer (2002); Legge (1995); Mascarenhas (2008); Tanure, Evans e Pucik (2007), Ulrich (2000) e Vasconcelos (2006), dentre outros, paa apreender como os profissionais que atuam no delineamento de estratégias e operacionalização das ações de recursos humanos concebem o seu posicionamento e eventual alinhamento à estratégia organizacional. O método analisou e descreveu o modelo de gestão de pessoas da empresa campo do estudo. A coleta de dados contou com a realização de entrevistas semi-estruturadas com os 05 gestores de RH que atuam na matriz (Natal/RN). Também foram coletados dados secundários, além de documentos e comunicações internas da empresa que tocam ao RH. Os dados coletados foram analisados à luz da análise de conteúdo de Bardin (1977). Através da análise, foi possível identificar políticas e práticas de RH que perpassam um modelo de gestão de pessoas bem definido e consolidado, com impactos mensuráveis no desempenho organizacional. Percebeu-se, também, a forte disseminação de uma cultura organizacional com foco no posicionamento estratégico e na informalidade e proximidade das relações, que permeiam o modelo de gestão de pessoas. Concluiuse a coerência entre as políticas estratégicas da empresa e as de recursos humanos. A pesquisa apreendeu as interfaces do modelo de gestão estratégica de pessoas da empresa; estas implicam uma alternância entre pensamentos e atitudes vinculados à versão hard, onde o papel das prática de RH é garantir que as pessoas alcancem os objetivos empresariais; e à versão soft, onde o papel do RH é desenvolver o capital intelectual e humano para diversificar os negócios e alcançar resultados sustentáveis e diferenciados. O salto qualitativo atingido pela Ale pode ser atribuído ao fato de possuir um RH situado hierarquicamente na alta cúpula da empresa, em posição de consultoria interna o que oferece perspectivas de atuação que vão muito além das rotinas operacionais desenvolvidas por boa parte das empresas no Brasil

Relações interétnicas em conflito entre makuxi e wapixana na terra indígena Raposa Serra do Sol

This dissertation present an analysis of the interethnic conflict between Makuxi and Wapixana at the current moment in the Maloca of the Adobe, Aboriginal Land Fox-Mountain range of the Sun, in the State of Roraima. The theoretical field was boarded in the Ethnology, pursuing situations in local history, with edges in ethno-history. The research elapsed of the deepening necessity on the social relations and aboriginal politics, for the intercultural professional exercise of educator, appealing the bibliographical survey and participant comment as method; not directive interviews, photographs, filmings and daily register in of field, as techniques carried through in the period of 2006 to 2007. Although to inhabit in the same area and to establish marriages between itself, individuals and groups express tensions, aggravated with the landmark and legal recognition of the area, which generated inter dispute and intraetnias, mainly with the intrusion of farmers, rizicultores and the form of governmental influence. A relation of rivalry, individual and collective was evidenced, suggesting the strengthenig and not it fractionly, of the fights external politics, interns and in way to the cultural diversity and social adversity

A influência de decisões arquitetônicas na eficiência energética do Campus vol. 1/UFRN

Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Qualidade do ar interior e conforto térmico : um estudo em espaços de estacionamento em Natal/RN

The recent tendency to utilize parking lots for other purposes has demonstrated that more time has been spent by visitors, mainly in great cities. Therefore, this paper investigates the thermal comfort and the air quality indoors in areas specifically used as parking lots by analyzing the direct relation between such environments and vehicular pollution. The thermal comfort and the quality of air indoors in parking lots with different architectonic typology (ground-floor and underground) are also studied, aiming to contribute to the proposition of suitable new areas designated to human usage. Field research was done, in two distinct periods within different weather conditions (January and July) in, two naturally cooled, parking lots located in Natal - RN. The internal environment agents were measured by using tools for air temperature, humidity, speed and direction; interviews with employees and visitors and chemical analysis through appropriate tools to analyze specific material, carbon monoxide and ozone. The results showed that chemical agents densely concentrate mostly in the closed parking space, aggravated by weather conditions, which dissatisfied the visitors. Still, it was shown that architectonic typology, alongside topographical aspects compromise internal environmental conditions, which increases the retention of pollution, leading to dissatisfactory thermal comfort levels and becoming less suitable for usage by visitors considering air and thermal comfort aspects. Consequently, they are not suitable for human stay due to the poor quality of the indoor air

Exclusão social e projetos habitacionais. Um estudo sobre conjuntos habitacionais, segregação e exclusão social em Natal/RN

In Natal s urban growth process it is given that the performance period of the National Housing Bank (BNH, 1964-1986) was marked by the intense expansion of the urban grid and configuration of outskirts, through the construction of social housing developments. Implanted in segregated areas of the existing formal city, the population installed in these complexes was also excluded from their rights, considering that the housing defines itself not only by the physical dwelling, but also by its access to urban infrastructure, facilities, services, and others. From this reality and the verification of the city s exclusion and sociospatial segregation processes, we aimed to quantitatively demonstrate levels of social exclusion in Natal, based on the methodology developed by Sposati (2000) and adapted by Genovez (2002), which relates IBGE s (Brazilian Institute of Geography and Statistics) database underlying variables such as income, schooling and dwelling s quality. The research unveiled some spatial patterns promoted by the social housings: in these areas islands were developed with higher indicators than surrounding areas, revealing internal hierarchies in the city s outskirts

Efeito do Fucoidam de Fucus vesiculosus em um modelo experimental de artrite reumatóide

Rheumatoid arthritis (RA) is systemic auto imune disorder. It is caracterized by chronic inflammation of joints leading to progressive erosion of cartilage and bone. We investigated the effect of the administration of fucoidan, sulfated polysaccharides, from algae Fucus vesiculosus in the acute (6h) in zymosan-induced arthritis (AZy). Wistar rats (180-230 g) were used for all groups experimental. Non-treated animals received just intraarticular injection of 1 mg the zymosan, control group received intraarticular injection of 50 µL the saline, groups received either fucoidan of Fucus vesiculosus (15, 30, 50 or 70 mg/Kg) or parecoxib (1 mg/Kg) 1 hour after injection of zymosan. After 6 h, the articular exudates were collected for evaluation of the cell influx and nitrite (Griess reaction) release. The sinovial membranes and articular cartilages were excised for histopathological analysis and by determination of the glycosaminoglycan (GAG), respectively. ZyA led to increased NO and cell influx into the joints. Therapeutic administration of the fucoidan or parecoxib did significantly inhibited the cell influx and the synovitis, as compared to non-treated rats (p<0,05), though being able to reduced NO release. Representative agarose gel electrophoresis of the GAGs, the content of condroitin-sulphate was observed during the process. These findings suggest that the fucoidan from Fucus vesiculosus has potential anti-inflammatory activity

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Uma metodologia para a análise do desempenho sustentável dos postos de revenda de combustível na cidade de Natal/RN, com o uso de data envelopment analysis-DEA

The increasing use of fossil fuels in line with cities demographic explosion carries out to huge environmental impact in society. For mitigate these social impacts, regulatory requirements have positively influenced the environmental consciousness of society, as well as, the strategic behavior of businesses. Along with this environmental awareness, the regulatory organs have conquered and formulated new laws to control potentially polluting activities, mostly in the gas stations sector. Seeking for increasing market competitiveness, this sector needs to quickly respond to internal and external pressures, adapting to the new standards required in a strategic way to get the Green Badge . Gas stations have incorporated new strategies to attract and retain new customers whom present increasingly social demand. In the social dimension, these projects help the local economy by generating jobs and income distribution. In this survey, the present research aims to align the social, economic and environmental dimensions to set the sustainable performance indicators at Gas Stations sector in the city of Natal/RN. The Sustainable Balanced Scorecard (SBSC) framework was create with a set of indicators for mapping the production process of gas stations. This mapping aimed at identifying operational inefficiencies through multidimensional indicators. To carry out this research, was developed a system for evaluating the sustainability performance with application of Data Envelopment Analysis (DEA) through a quantitative method approach to detect system s efficiency level. In order to understand the systemic complexity, sub organizational processes were analyzed by the technique Network Data Envelopment Analysis (NDEA) figuring their micro activities to identify and diagnose the real causes of overall inefficiency. The sample size comprised 33 Gas stations and the conceptual model included 15 indicators distributed in the three dimensions of sustainability: social, environmental and economic. These three dimensions were measured by means of classical models DEA-CCR input oriented. To unify performance score of individual dimensions, was designed a unique grouping index based upon two means: arithmetic and weighted. After this, another analysis was performed to measure the four perspectives of SBSC: learning and growth, internal processes, customers, and financial, unifying, by averaging the performance scores. NDEA results showed that no company was assessed with excellence in sustainability performance. Some NDEA higher efficiency Gas Stations proved to be inefficient under certain perspectives of SBSC. In the sequence, a comparative sustainable performance and assessment analyzes among the gas station was done, enabling entrepreneurs evaluate their performance in the market competitors. Diagnoses were also obtained to support the decision making of entrepreneurs in improving the management of organizational resources and promote guidelines the regulators. Finally, the average index of sustainable performance was 69.42%, representing the efforts of the environmental suitability of the Gas station. This results point out a significant awareness of this segment, but it still needs further action to enhance sustainability in the long term

A encruzilhada da vida política em assentamentos de reforma agrária no Rio Grande do Norte

The rural settlements represent a mark in the expensive historical process of fight by the land in Brazil. At first offer basic terms of survival, through the access the land and of the fundamental supports for exploration. At the same time, have stimulated organization forms politicizes of the families who manage to work with the new challenges of the everyday. The moment that follows the land conquest, and therefore, the settlements construction while life and work project, it is crossed for objective and subjective demands, with highlight for options of agricultural production and strategies of collective action. Originally formed as representation instance legitimates of the families - front to the government and social actors - the settlers associations are private spaces for political sociability, that guided by principles participative, can lead the settlers the new conquests through indeed democratic experiences. The goal of this work is to comprehend the participation forms in the scope of these associations and the way as that translates in life best terms for the group, from the settlements experiences located in the Territories of the Citizenship Mato Grande and Açu-Mossoró, in Rio Grande do Norte's State. The theoretical conceptions that guide this analysis are concentrate on discussions about democracy and participation (Patermam, Putnam, Bodernave) and in the reflections about the rural world (Medeiros, Martins, Woodman e Woodman and Bergamansco). About methodological, different point of view strategies were developed: The direct observation, the application in locate of questionnaires to the families settlers and interviews semi-structured with the internal leaderships. With that could verify that the participation forms in the associations operate in two heartfelt: Of a side, they promote assimilation opportunities of democratic abilities accompanied of notions of social rights and redefinition of political standards; Of another, it offers indeed the possibility of the settlers lead, with relative autonomy, the political organization and her changes in direction to a way of life that wish to have in the settling