Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Craqueamento térmico e termocatalítico do óleo de girassol (Hellianthus annus L.) sobre materiais micro e mesoporosos

Microporous materials zeolite type Beta and mesoporous type MCM-41 and AlMCM-41 were synthesized hydrothermally and characterized by methods of X-ray diffraction, Fourier transform infrared, scanning electron microscopy, surface acidity, nitrogen adsorption, thermal analysis TG / DTG. Also we performed a kinetic study of sunflower oil on micro and mesoporous catalysts. The microporous material zeolite beta showed a lower crystallinity due to the existence of smaller crystals and a larger number of structural defects. As for the mesoporous materials MCM-41 and AlMCM-41 samples showed formation of hexagonal one-dimensional structure. The study of kinetic behavior of sunflower oil with zeolite beta catalysts, AlMCM-41 and MCM-41 showed a lower activation energy in front of the energy of pure sunflower oil, mainly zeolite beta. In the thermal cracking and thermocatalytic of sunflower oil were obtained two liquid fractions containing an aqueous phase and another organic - organic liquid fraction (FLO). The FLO first collected in both the thermal cracking as the thermocatalytic, showed very high level of acidity, performed characterizations of physicochemical properties of the second fraction in accordance with the specifications of the ANP. The second FLO thermocatalytic collected in cracking of sunflower oil presented results in the range of diesel oil, introducing himself as a promising alternative for use as biofuel liquid similar to diesel, either instead or mixed with it

Estudo sobre a mortalidade e sobrevivência de micro e pequenas empresas natalenses e seus impactos nas políticas públicas pró-empreendedorismo

The principal purpose of this research was to investigate discriminant factors of survival and failure of micro and small businesses, and the impacts of these factors in the public politics for entrepreneurship in the State of Rio Grande do Norte. The data were ceded by SEBRAE/RN and the Commercial Committee of the Rio Grande do Norte State and it included the businesses that were registered in 2000, 2001 and 2002. According to the theoretical framework 3 groups of factors were defined Business Financial Structure, Entrepreneurial Preparation and Entrepreneurial Behavior , and the factors were studied in order to determine whether they are discriminant or not of the survival and business failure. A quantitative research was applied and advanced statistical techniques were used multivariate data analysis , beginning with the factorial analysis and after using the discriminant analysis. As a result, canonical discriminant functions were found and they partially explained the survival and business failure in terms of the factors and groups of factors. The analysis also permitted the evaluation of the public politics for entrepreneurship and it was verified, according to the view of the entrepreneurs, that these politics were weakly effective to avoid business failure. Some changes in the referred politics were suggested based on the most significant factors found.

Fatores inibidores à adoção de tecnologias de informação em micro e pequenas empresas fornecedoras da vale no estado do Pará

Universidade Estadual do Rio Grande do Norte

Burocracia e comércio exterior: os desafios à exportação sob a ótica das micro e pequenas empresas exportadoras do rio grande do norte

As micro e pequenas empresas, ao mesmo tempo em que exercem um papel extremamente relevante na estrutura produtiva da economia brasileira pelo grande número de empreendedores existentes e expressivo volume de pessoal ocupado, perdem competitividade ao se deparar com entraves ao seu desenvolvimento, sejam eles em âmbito gerencial, financeiro, burocrático ou estrutural. Com base nesse contexto, o estudo procura identificar em que medida, na percepção das MPEs exportadoras do Rio Grande do Norte, as exigências burocráticas do processo exportador afetam o seu desempenho no comércio exterior. Como exigências burocráticas compreende-se o conjunto de normas, regras e procedimentos e documentos que disciplinam o processo exportador, enquanto desempenho é entendido como os resultados da atividade econômica medido através do crescimento das vendas para o mercado externo; das demandas de produtos exportados não atendidas e da ampliação do mercado internacional. A pesquisa realizada é de caráter censitário, desenvolvida junto a quatorze MPEs do estado, atuantes regularmente no comércio exterior nos últimos três anos (2009-2011), utilizando aplicação de questionário, assim como uma consulta a dados secundários disponíveis. A análise dos dados levantados revelou que, efetivamente, na percepção dos respondentes, fatores externos como o custo do processo de exportação, falta de incentivo do governo, excesso de controle dos órgãos públicos e a infraestrutura logística do estado exercem influência na pequena participação das MPEs nas exportações do Brasil e do Nordeste, enquanto o bom desempenho exportador destas relaciona-se a fatores gerenciais, com destaque para investimentos na estrutura organizacional da empresa, conhecimento do mercado internacional e bom relacionamento com clientes e mercados

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Síntese hidrotérmica assistida por micro-ondas de tiO2, e aplicação em nanocompósito

In recent decades have seen a sharp growth in the study area of nanoscience and nanotechnology and is included in this area, the study of nanocomposites with self-cleaning properties. Since titanium dioxide (TiO2) has high photocatalytic activity and also antimicrobial, self-cleaning surfaces in your application has been explored. In this study a comparison was made between two synthesis routes to obtain TiO2 nanoparticles by hydrothermal method assisted by microwave. And after analysis of XRD and SEM was considered the best material for use in nanocomposites. It was deposited nanocomposite film of poly (dimethyl siloxane) (PDMS) with 0.5, 1, 1.5 and 2% by weight of nanoparticles of titanium dioxide (TiO2) by the spraying method. The nanocomposite was diluted with hexane and the suspension was deposited onto glass substrate, followed by curing in an oven with forced air circulation. The photocatalytic activity of the nanocomposite impregnated with methylene blue was evaluated by UV- vis spectroscopy from the intensity variation of absorption main peak at 660nm with time of exposure to the UV chamber. Changes in the contact angle and microhardness were analyzed before and after UV aging test. The effect of ultraviolet radiation on the chemical structure of the PDMS matrix was evaluated by spectrophotometry Fourier transform infrared (FTIR).The results indicated that the addition of TiO2 nanoparticles in the coating PDMS gave high photocatalytic activity in the decomposition of methylene blue, an important characteristic for the development of self-cleaning coatings

Desenvolvimento, pobreza e meio ambiente no seridó potiguar: um estudo centrado nas micro-regiões do seridó oriental e ocidental

This research work intends to carry out a study focused on the dynamic between development, poverty reduction and conservation of natural resources. To consider this relationship to the region chosen was the micro-region of Eastern and Western Seridó in the state of Rio Grande do Norte. In recent years, several studies (Araújo, 2011; BASTOS, 2009) have pointed out that after a period of economic crisis in its tripodproductive, formed by the activities of farming, cotton farming, mining and faced in the eighties, this region of the State of Rio Grande do Norte, has not only shown signs of economic recovery but also improve their social indicators. On the other hand, studies of desertification as the view of the state of RN (produced in cooperation between the Government of RN and research institutions) and the Sustainable Development Plan of Seridó (ADES, 2000), indicate that there is an ongoing French process of degradation of natural resources that is capable of compromising the ability of sustaining such a system. To verify this reality and likely finding this relationship, this work is adopted for this study, the analysis of evolution of secondary data from official bodies such as the IBGE on HDI, per capita income and other social indicators between 2000 and 2009. Here is another time of the survey analysis of qualitative data collected from interviews with institutions of academic intervention in nature, researchers at the Federal University of Rio Grande do Norte (UFRN) State agencies that address the issue of the Middle Environment in Seridó: Institute for Sustainable Development of the NB (IDEMA) and the Brazilian Institute of Environment and the Amazon (IBAMA) and institutions of direct intervention in the region, as the Agency's Sustainable Development Seridó (adhesive) and the Joint Semi-Arid (ASA). After crossing data from quantitative and qualitative, it was found that the dynamics of the region's economic Seridó Potiguar partially answers the improvement of social indicators of poverty. Contribution by the State in this shared stock transfer income. Regarding the influence of productive restructuring in the region on issues of environment, it is noted that the ceramic tile industry, responsible for the absorption percentage of the population with limited ingress into the urban economy, given the low education, accounts for the increase of susceptibility to the ongoing process of desertification in North Seridó Rio Grande. We conclude finally that the guarantee of increased income, freedom and conservation of natural resources ensures primarily by changing the beliefs and values, especially on the part of the business sector, which use natural resources so predatory, aimed at maintaining their rates of return on investment. And concomitantly, the synchronization between technological change, through the use of new energy sources, and institutional change.

Inserção do Design em Micro e Pequenas Empresas: o caso de duas indústrias moveleiras no Estado do Rio Grande do Norte /

This work aims to promote design aspects into furniture Small and Medium Enterprises (SME s) at Rio Grande do Norte State. The final outcome will be an increasing on their competitiveness as well as consider design as key strategic aspect for their business. As a consequence, the results are based on two SME companies from the furniture sector located at Natal/RN. The study is based on a literature research followed by a management diagnosis for each company. The diagnosis was base don interviews with the entrepreneurs and their employees as well as meetings, participant observations and document analysis. Based on this analysis, specific aspects were implement in order to boost the production line as well as the product development process (PDP) and the development of a prototype. The results have indicated some limitation of these companies regarding their low technological on their production line, poor management and work skills as well as low perception of design as a competitive tool. Regardless these results, it was observed that design has brought an important contribution for cultural changes within companies as well as for the development of better quality and competitive products

Adoção de tecnologias de informação nas micro e pequenas empresas fornecedoras da Petrobras no Rio Grande do Norte

A pesquisa tem como objetivo identificar as barreiras à adoção de tecnologias de informação por parte das micro e pequenas empresas. A pesquisa teórica foi orientada por estudos sobre adoção de tecnologias de informação e os fatores determinantes para esta adoção. Quanto à amostra, foi delimitada aos pequenos fornecedores não adotantes do sistema de compras eletrônicas da Petrobras no Rio Grande do Norte. A pesquisa é exploratória, do tipo levantamento de dados, com abordagem quantitativa. A pesquisa de campo foi realizada nos meses de novembro e dezembro de 2006, junto a 55 empresas, através de um questionário estruturado, respondido pelos gestores. Para a análise dos dados, foram utilizadas técnicas estatísticas, tais como análise descritiva e exploratória de dados, testes de hipótese e análises multivariadas de dados. Os resultados evidenciam a existência de uma infra-estrutura de TI básica, com baixo nível de utilização dessas tecnologias para propósitos mais avançados dentro das empresas e em especial a sua utilização para as atividades de gestão e estratégias de acesso a mercados, principalmente o seu uso como ferramentas para o comércio eletrônico. Os resultados mostraram também que os aspectos técnicos e financeiros são percebidos como obstáculos maiores que os fatores socioculturais e humanos. As variáveis relacionadas com os custos da TI e de consultoria externa, a percepção de dependência de fornecedores de TI e a falta de priorização de esforços ára a TI

Proposta de um modelo de gestão da qualidade para micro e pequenas empresas integrando a estratégia seis sigma à NBR ISO 9001

This work has as its main purpose to set a model of Quality Management for micro and small companies integrating the management models: Six Sigma strategy to NBR ISO 9001:2000. An exploratory research is developed to collect technical and bibliographical information on both methods, emphasizing their integration. Then, a survey is carried out on 65 analysts/consultants of Quality Management Systems and it has detected, besides other factors, that current methodologies must be associated in order to reach better results. At last, it proposes the Sigma 9001 model, which aims to make it possible for micro and small companies to objectively and with low costs, implement a Quality Management System, able to assure competitive advantage through improvement identification in the processes, as well as an improvement in the companies management

Educação corporativa para Micro e Pequenas empresas: aplicação do MADEC em empresas do setor supermercadista

This study searches to supply an existing gap in the empirical research about the performance of controllers of Micron and Small Companies (MSCs) in the context of corporative education (EC) through the Method of Support of Decision in Corporative Education (MSDCE). In the context of MCSs, this is a pioneering work, for other works related to this thematic searched in literature are limited to conjecture the possibility of its implantation via cooperation between companies; moreover, they do not apply any type of diagnosis method or viability. The object of study is an association of supermarkets of the city of Natal/RN, composed by 16 stores, of what 14 had been searched. The main objective of this work was to apply the first stage of the MSDCE and to verify the possibility of implanting the Corporative Education in the searched MSCs. As a result, it was obtained the profile of the companies and the validation of the above-mentioned Method. The phase of diagnosis conceived through the implantation of the first stage occurred through visits to the stores, interviews, application of questionnaires and place observation. The first stage - strategical analysis for professional education - was divided in two phases: analysis of the current corporative situation and available identification of the involved difficulties and resources. The implantation of the first stage of the MSDCE in the Association of Supermarkets Parceiros da Economia demanded a mapping of abilities and demonstrated how the education management works, the main difficulties and limitations of the MCSs of the supermerket branch of Natal/RN. Beyond the technological aspects, it was verified that cultural and educational aspects need to be worked to reach efficiency in the process of implantation of a corporative education program

Avaliação dos processos de seleção utilizados nos programas de fomento a inovação nas micro e pequenas empresas da fundação de amparo à pesquisa do Rio Grande do Norte

Technological innovation promotes the generation of economic value by creating a new product, process or organizational management model, being classified as dynamic and multidimensional. Government intervention has the role of acting through government grant programs to foster the integration of innovative processes in small companies, due to the high costs and risks of development, strengthening the country`s economy in this phase. The distribution of this grant is determined by criteria, based especially in subjective judgments, which are based on the beliefs and perceptions about the technological opportunities and market actors involved in the process, being very difficult to measure the probability of success of the project under evaluation. This study aims to identify the most relevant selection criteria that must be inserted in grants programs at Rio Grande do Norte executed by Fundação de Pesquisa do Rio Grande do Norte (FAPERN). Initially, there was a systematization of 18 countries, covering 41 programs in foreign countries and 29 in Brazil. Based on the data collected, we conducted one survey containing four programs of FAPERN (INOVA I, INOVA II , INOVA III and INOVA IV), covering 44 companies and analyzing their responses according to the Likert scale , obtaining the degree of importance given by the respondent to each of the criteria in the questionnaire . As a result, drew up a proposal for new criteria to be used in the next FAPERN´s grants, containing 13 new criteria. It is expected, therefore, to contribute to a better spending of public funds invested in companies subsidized in Brazil

Avaliação da eficiência dos investimentos do programa Inova-RN em micro e pequenas empresas Uma integração da análise envoltória de dados e índice Malmquist

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles