Expressão imuno-histoquímica metaloproteinase -1, -2 e -9 em ameloblastoma sólido e tumor odontogênico adematóide

Ameloblastoma and adenomatoid odontogenic tumor are odontogenic tumors arising from the odontogenic epithelium with distinct clinical behavior. In attempt to comprehend the interaction between the odontogenic tumor cells and the extracellular matrix, the present work evaluated and compared the immunohistochemical expression of the matrix metalloproteinases-1 (MMP-1), -2 (MMP-2) and -9 (MMP-9) in 20 cases of ameloblastoma and 10 adenomatoid odontogenic tumor. MMP-1 exhibited exuberant expression in the parenchyma and in the stroma of both studied tumors, while the MMP-2 showed varied expression with about of 80% and 60% of the neoplastic cells exhibiting positivity in the ameloblastoma and adenomatoid odontogenic tumor, respectively. With relation to the MMP-2 expression by the mesenchymal cells, it was observed that 65% of the ameloblastoma and 80% of the adenomatoid odontogenic tumor were positive. The immunoreactivity of MMP-9 was detected in all studied cases, although its expression had occurred predominantely in less than 50% of the parenchyma cells of the ameloblastoma, while in about of 60% of the adenomatoid odontogenic tumor more than 50% of cells were positive. The mesenchymal cells were positive to MMP-9 in 65% of the ameloblastoma and in 80% of the adenomatoid odontogenic tumor, respectively. Statistically significant difference was observed to the MMP-1 expression with relation to MMP-2 and MMP-9 in the ameloblastoma (p < 0.001). It was not possible to perform statistical analysis to the cases of adenomatoid odontogenic tumor, however there was a tendency toward a differential expression of the MMP-1 with relation to other studied MMPs. These results suggest that MMP-1, - 2 and -9 are implicated in the growth and progression of both tumors analyzed as well as the more pronounced participation of the stroma in the ameloblastoma could together to be related to the higher clinical aggressiveness

Análise imuno-histoquímica das metaloproteinases da matriz ( MMP-1,MMP-2 e MMP-9) na doença periodontal

The tissular destruction found in periodontal diseases is caused mainly by components of the host that have its production stimulated by the products of the microorganisms present on the plaque. Matrix Metalloproteinases (MMPs), a class of enzymes involved both in physiologic and pathologic extracellular matrix degradation are considered the main responsible for the characteristic tissular loss in periodontal disease, and the understanding of how this happens can have a series of beneficial implications for prevention, diagnosis and treatment of this illness. The aim of this work was to study the immunohistochemical expression of MMP-1, MMP-2, and MMP-9 in fragments of gingival biopsies with clinical diagnose of periodontal disease. MMP-1 has expressed significantly more than the others MMPs in gingivitis both in the epithelium (p=0,0008) and connective tissue (p=0,0049). In periodontitis, both MMP-1 and MMP-9 has expressed significantly more than MMP-2 in the epithelium (p<0,0001) and in the connective tissue (p=0,0002). MMP-1 and MMP-9 presented more expression in periodontitis than in gingivitis but MMP-1 only in the connective tissue (p=0,03) and MMP-9 in the epithelium (p=0,003) and in the connective tissue (p=0,04). In conclusion, these results indicate that the MMP-1 presents high expression in every stages of the periodontal diseases, and increases its expression in the connective tissue when the gingivitis evolves to periodontitis. Therefore, it may have an important role in connective tissue degradation and bone loss observed in disease, since early, in gingivitis, until late stages, in periodontitis, of the periodontal disease. MMP-9 has expressed more in periodontitis than in gingivitis, both in epithelium and in connective tissue. It means that this enzyme may have some importance in the progression of gingivitis to periodontitis by acting in bone resorption observed in this desease

Estudo imuno-histoquímico da presença de miofibroblastos e da expressão do fator transformador de crescimento-beta1, interferon gama, metaloproteinase de matriz 13 e indutor de metaloproteinases de matriz em lesões odontogênicas epiteliais

Myofibroblasts are cells that exhibit a hybrid phenotype, sharing the morphological characteristics of fibroblasts and smooth muscle cells, which is acquired during a process called differentiation. These cells then start to express -SMA, a marker that can be used for their identification. Studies suggest that myofibroblasts are related to the aggressiveness of different tumors and that TGF-1 and IFN- play a role in myofibroblast differentiation, stimulating or inhibiting this differentiation, respectively. The objective of this study was to investigate the role of myofibroblasts in epithelial odontogenic tumors, correlating the presence of these cells with the aggressiveness of the tumor. Immunohistochemistry was used to evaluate the expression of TGF-1 and IFN- in myofibroblast differentiation, as well as the expression of MMP-13, which is activated by myofibroblasts, and of EMMPRIN (extracellular matrix metalloproteinase inducer) as a precursor of this MMP. The sample consisted of 20 solid ameloblastomas, 10 unicystic ameloblastomas, 20 odontogenic keratocysts, and 20 adenomatoid odontogenic tumors. For evaluation of myofibroblasts, anti- -SMA-immunoreactive cells were quantified in connective tissue close to the epithelium. Immunoexpression of TGF-1, IFN-, MMP-13 and EMMPRIN was evaluated in the epithelial and connective tissue components, attributing scores of 0 to 4. The results showed a higher concentration of myofibroblasts in solid ameloblastomas (mean of 30.55), followed by odontogenic keratocysts (22.50), unicystic ameloblastomas (20.80), and adenomatoid odontogenic tumors (19.15) (p=0.001). No significant correlation between TGF-1 and IFN- was observed during the process of myofibroblast differentiation. There was also no correlation between the quantity of myofibroblasts and MMP-13 expression. Significant correlations were found between MMP-13 and TGF-1 (r=0.087; p=0.011), between MMP- 13 and IFN- (r=0.348; p=0.003), as well as between EMMPRIN and MMP-13 (r=0.474; p<0.001) and between EMMPRIN and IFN- (r=0.393; p=0.001). The higher quantity of myofibroblasts observed in solid ameloblastomas, odontogenic keratocysts and unicystic ameloblastomas suggests that these cells are one of the factors responsible for the more aggressive biological behavior of these tumors, although the myofibroblast population was not correlated with TGF-1, IFN-, MMP-13 or EMMPRIN. The correlation between MMP- 13 and TGF-1 suggests that the latter induces the expression of this metalloproteinase. The present results also support the well-established role of EMMPRIN as an inducer of MMP-13. Furthermore, the relationship between EMMPRIN and IFN- and between MMP-13 and IFN- suggests synergism in the antifibrotic effect of these markers

Expressão imuno-histoquimica de colagenase-1 e gelatinases A e B em mixomas odontogênicos e papilas de germes dentários

The odontogenic myxoma shares cellular and structural aspects with dental papilla, which has been implicated as probable origin of this neoplasm. The aim of the present study was to perform a comparative immunohistochemical analysis for the expression of collagenase-1 (MMP-1) and gelatinases A (MMP-2) and B (MMP-9) in odontogenic myxomas and dental papilla of teeth germs. Twelve cases of odontogenic myxomas and eight specimens of teeth germs were selected. It was taken into consideration the presence or absence of immunoreactivity, the pattern of immunohistochemical distribution of proteases within extracellular matrix, as well as, the number of cells revealing immunostaining for matrix metalloproteinases (MMPs). It was verified a significant difference (p<0,05) in relation to MMP-2 immunoexpression, which was observed only within extracellular matrix of myxomas. Nevertheless, MMP-1 labeling was revealed by most of the cases of odontogenic myxoma, at levels close to those observed in dental papilla. In relation to the pattern of distribution, a significant difference was obtained between specimens (p<0,05), with neoplasms predominantly exhibiting a focal pattern for MMP-1. The quantitative analysis of neoplastic cells labeled for MMPs denoted a significant difference (p<0,05), demonstrating a higher proportion of MMP-1 in comparison to MMPs-2 and -9. It can be concluded that immunohistochemical expression of MMP-1 at levels comparable to those observed in dental papilla and quantitatively superior in relation to MMPs-2 and -9, suggest an implication of this protease on extracellular matrix degradation of odontogenic myxomas. Moreover, the possibility of interactions with receptors involved in cellular adhesion, particularly with integrins, suggests a plausible function on local invasiveness of such neoplasms. Additionally, the presence of a descent immunoexpression gradient for these MMPs on odontogenic myxomas, associated to substrate specificity inherent in each enzyme, suggest the existence of a coordinated mechanism between interstitial collagenase and gelatinases A and B in order to allow an efficient degradation of extracellular matrix and local invasion by neoplastic cells

Estudo da expressão imuno-histoquímica das proteínas MMP-9, MMP-13 e TIMP-1 em ameloblastomas e tumores odontogênicos ceratocistos

Ameloblastomas and keratocystic odontogenic tumors (KOT) represent odontogenic lesions that, despite their benign nature, are distinguished by a distinct biological behavior, characterized by locally aggressive growth and recurrent episodes. The gnathic bone resorption caused by the growth of these lesions is a key to the expansion of the same, both being mediated by osteoclastic cells like enzymatic activity of various matrix metalloproteinases (MMPs) factor. The expression of stimulatory factors and inhibitors of bone resorption has been correlated with the development of these lesions, with emphasis to some MMPs such as collagenases and gelatinases and tissue inhibitors of metalloproteinases (TIMPs), among others. Based on the premise that stimulatory and inhibitory factors of osteolytic processes can be decisive for the growth rate of intraosseous odontogenic lesions, this experiment evaluated the immunoreactivity of MMP-9, -13 and TIMP-1 protein in the epithelium and mesenchyme of ameloblastoma and the KOT specimens, by a quantitative analysis of the immunoreactivity cells. Statistical analysis was performed using the Mann-Whitney and Wilcoxon tests with a significance level set at 5 %. Immunohistochemical expression of MMP-9, -13 and TIMP-1 was observed in 100% of cases both in the epithelium and in mesenchyme. The immunoreactivity in the epithelium of KOT and ameloblastomas revealed a predominance of score 3 for MMP-9 (p=0.382) and MMP-13 (p=0.069) and no statistically significance for TIMP-1, the latter being significantly higher immunoreactivity in ameloblastomas. In the mesenchyme, there was a higher score immunoreactivity of MMP-13 (p=0.031) in ameloblastomas in relation to KOT, whereas for MMP-9 and TIMP-1 no statistically significant difference (p=0.403 was observed, p=1.000). The calculation of the ratio of scores revealed expression of proteins in general, similarity of the lesions, a significant predominance of equal expression of TIMP-1 and MMP-9 was observed only in the epithelium of ameloblastoma. The marked immunostaining of MMP-9 , MMP-13 and TIMP-1 in epithelium and mesenchyme of the lesion indicate that these proteins involved in ECM remodeling required for tumor progression, however, specific differences in the expression of some of these proteins, are not sufficient to suggest differences in the biological behavior of ameloblastomas and KOTs

Estudo da expressão imuno-histoquímica das MMPs -2, -7, -9 e -26 e TIMPs -1 e -2 em adenomas pleomórficos e carcinomas adenóides císticos de glândulas salivares menores

The balance between the expression of matrix metalloproteinases (MMPs) and their tissue inhibitors (TIMPs) has been related to various physiological and pathological processes, including salivary gland morphogenesis and tumor invasion and metastasis processes. Pleomorphic adenoma (PA) and adenoid cystic carcinoma (ACC) respectively represent benign and malignant neoplasias of salivary glands. Although they share the same cell origin, they present distinct biological behavior. The aim of this study was to compare the immunohistochemical expression of MMPs -2, -7, -9 and -26, and of TIMPs -1 and -2, in cases of PA and ACC of minor salivary glands. Twenty cases of PA and twenty cases of ACC were assessed according to the presence, intensity and location of MMPs and TIMPs in the tumor parenchyma. Most of the PAs and ACCs presented a high expression of MMP -2, -7, -9 and -26 and of TIMP -1 and -2, predominantly located in tumor cells. There was no significant difference in the expression of MMPs -2 (p=0.359), -7 (p=0.081) and -26 (p=0.553), as well as of TIMPs -1 (p=0.657) and -2 (p=0.248), between the parenchyma of PAs and ACCs. However, MMP-9 showed a significant difference of expression between the two tumors, with the ACC showing more intense marking for this gelatinase (p=0.041). The strong expression of MMP-9 observed in the parenchyma suggests that this gelatinase may play an important role in the biological behavior of these tumors. On the other hand, although there was no significant difference between the marking of MMP -2, 7 and 26 in the studied tumors, the data, when analyzed as a whole, suggest that these proteases may take part in the process of tissue remodeling in both tumors, but do not present a direct relation with the pattern of aggressiveness of ACC. Nonetheless, matrilisins may indirectly influence the behavior of this tumor due to their capacity of activating MMP-9, strongly expressed in the parenchyma of ACC

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Efeito da adição de grafite expandido por microondas nas propriedades térmicas, elétricas e mecânicas de nanocompósitos de matriz epóxi

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Desenvolvimento e análise de material compósito a base de penas de frango (fibras de queratina-KF) e matriz de poliéster insaturado

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite

Associação entre polimorfismos funcionais nos genes da MMP-7 e MMP-9 e o perfil clinicopatológico do carcinoma epidermóide de língua

Matrix metalloproteinase-7 (MMP-7) and -9 (MMP-9) modulate important functions strictly related to the development, invasion and metastasis of several human cancers among them the squamous cell carcinoma of the tongue (SCCT). However, individual genetic factors such as the functional single nucleotide polymorphisms (SNPs) influence the pattern of protein expression of these MMPs and thus may be related to the variability observed in the clinical behavior of patients with SCCT. In this context, the present cross-sectional study aimed to evaluate the association between the frequency of the functional SNPs MMP-7 -181 A/G and MMP-9 -1562 C/T and the clinical (age, gender and metastasis) and pathological (malignancy histological grading and immunohistochemistry expression) features of SCCT cases. Genotyping of these SNPs were performed by PCR-RFLP on DNA samples from 71 cases of SCCT and 60 individuals without cancer who constitute the control group. Among the results of this research, it was observed that the frequency of the polymorphic alleles MMP-7 -181 G and MMP-9 -1562 T in SCCT patients was 28% and 12%, respectively, and the frequency of the heterozygotes A/G (PR = 2.00; p < 0.001) and C/T (PR = 1.54; p = 0.014) were significantly higher in the patient group than in the controls. The prevalence of patients carrying the combination of SNPs studied was significantly associated with SCCT cases (PR = 2.00; p = 0.011) and metastasis (PR = 2.00; p < 0.001). Furthermore, with the frequency of SNPs analyzed, the age, gender, histological grading and immunoreactivity of MMP-7 and MMP-9 formed clinical and pathological parameters relevant to the identification of population subgroups more related to the development of SCCT and metastasis. Based on these results, it is suggested that the protein expression levels of MMP-7 and -9 substantially influence the balance between their pro- and anticancer biological functions and hence the clinicopathological profile of the squamous cell carcinoma of the tongue

Efeitos da azilsartana sobre a doença periodontal em um modelo experimental com ratos wistar

Periodontal diseases, highly prevalent disease in worldwide population, manifest primarily in two distinct entities: plaque-induced gingivitis and periodontitis. Periodontitis is a chronic inflammatory disease characterized of different levels of collagen, cementum, and alveolar bone destruction. Recent experimental studies demonstrated anti-inflammatory and antirreabsortive effect of antihypertensive agents of the angiotensin II receptor blockers class on periodontal disease. The aim of this study was to evaluate the effects of azilsartan (AZT), a potent inhibitor of the angiotensin II receptor which has minimal adverse effects on bone loss, inflammation, and the expression of matrix metallo proteinases (MMPs), receptor activator of nuclear factor kB ligand (RANKL), receptor activator of nuclear factor kB (RANK), osteoprotegerin (OPG), cyclooxygenase-2 (COX-2), and cathepsin K in periodontal tissue in a rat model of ligature-induced periodontitis. Male Wistar albino rats were randomly divided into 5 groups of 20 rats each: (1) nonligated, water; (2) ligated, water; (3) ligated, 1 mg/kg AZT; (4) ligated, 5 mg/kg AZT; and (5) ligated, 10 mg/kg AZT. All groups were treated with water or AZT for 10 days. Periodontal tissues were analyzed by morphometric exam, histopathology and immunohistochemical detection of MMP-2, MMP-9, COX-2, RANKL, RANK, OPG, and cathepsin K. Levels of IL-1b, IL-10, TNF-a, myeloperoxidase (MPO), and glutathione (GSH) were determined by ELISA. Treatment with 5 mg/kg AZT resulted in reduced MPO (p˂0.05) and IL-1b (p˂0.05) levels and increased in Il-10 levels (p˂0.05). It was observed a reduced expression of MMP-2, MMP-9, COX-2, RANK, RANKL, cathepsin K, and a increased expression of OPG in the animals subjected to experimental periodontitis and threated with AZT (5 mg/kg). Conclusions: These findings suggest an anti-inflammatory and anti-reabsortive effects of AZT on ligature-induced periodontitis in rats.