49 resultados para METERS
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Despite the importance of coral reefs to humanity, these environments have been threatened throughout the world. Several factors contribute to the degradation of these ecosystems. The Maracajaú Reef Complex, in Rio Grande do Norte state is part of the Coral Reefs Environment Preservation Area in northeastern Brazil. This area has been receiving an increasing influx of tourism and the integrity of the local reefs is a matter of concern. In this study, the reef macroalgae communities were studied and compared within two areas distinguished by the presence or absence of tourism activities. Two sample sites were chosen: the first one, where diving activities are intense; and the other, where these practices do not occur. Samples were collected at both sites within a quadrate of 625 cm2 of area randomly thrown 5 times along a 10 meters transect line. Richness, Shannon-Hill diversity and Simpson dominance indices were determined based on biomass data. Similarity between sites was analyzed with Bray-Curtis similarity and distance index. Fifty-eight macroalgae species were observed, including 7 Chlorophyta, 13 Phaeophyta and 38 Rhodophyta. In the non-disturbed site, 49 species were found, while at the disturbed site, there were 42 species. Dictyotaceae and Corallinaceae were the most representative families at the non-disturbed site, and Rhodomelaceae and Dictyotaceae at the disturbed site. The non-disturbed site presented a higher biomass and the greatest richness and diversity indices. In the disturbed site the dominance index was greater and Caulerpa racemosa was the dominant species. The dendogram based on similarity index showed two major clusters, and an isolated element at the center that corresponds to a sample from the disturbed site. In the first cluster, samples from the non-impacted site were predominant and fleshy brown algae were more conspicuous. The second cluster was composed primarily of samples from the impacted site, where C. racemosa and red filamentous and erect calcareous algae associations (turf forming) were observed covering large extensions. These associations are represented by groups of algae adapted to environments where disturbances are frequent. They can grow rapidly on substrate where benthic community was removed and do not allow the establishment of other species. The results of the present study show that tourism activity is an impacting factor that has been causing shifts in macroalgae communities in the Maracajaú Reef Complex
Resumo:
The work presents the effect of plasma treatment when applied in fibers or carbon/glass posts in the adhesion fiber/resin and posts/cement. This has for objective the modification of the surface of the fibers, as well as the wettability of the posts, seeking the improvement of the adhesion and of the connection fiber/resin in the processing of polymeric composites reinforced with the same ones. 120 posts (Reforpost) were used and 30 meters of fibers of carbon and of glass (Fibrex), of the company Angelus. The samples were divided in three groups of 40 specimens: GROUP I - 20 posts of glass fiber and 20 of carbon without treatment to it shapes, GROUP II -20 posts of glass fiber and 20 of carbon treated to it shapes in the surface and GROUP III - 20 posts of glass fiber and 20 of carbon make with fibers in natura after plasma treatment. The plasma treatment was accomplished with oxygen and with temperature in the camera fixed at 200°C, for one hour of exhibition. The posts and the fibers were characterized before and after the treatment. The wettability was measure by pendent drop method, and interface fiber/resin and posts/cement were observed by optical and electronic microscopy. It was observed that both wettability and texture were increased with plasma treatment
Resumo:
Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines
Resumo:
The State of Paraíba is one of the most dynamic states of Brazil, strategically located in the northeast, is notable for the excellent potential for integration of different transportation modes forming the states of Rio Grande do Norte, Pernambuco and Alagoas. The dynamic that occurs with port activity causes changes in the space where it is installed. And the elements of this space are always more than suffering direct or indirect influences as the flow in the port is expanded. Therefore, this region became subject to the accidental spillage of oil, because it presents a heavy traffic of ships of various sizes that can run aground or collide with oil causing accidental events. The study of geomorphological and sedimentological compositions of seafloor becomes important as more is known about the relationships between these parameters and associated fauna, and can identify their preferred habitats. The database background, acoustically collected along the proposed study area, is a wealth of information, which were duly examined, cataloged and made available. Such information can serve as an important tool, providing a geomorphological survey of the sedimentary area studied, and come to subsidize, in a flexible, future decision making. With the study area Port of Cabedelo, Paraíba - Brazil, this research aimed to evaluate the influence of the tidal surface and background in modeling the seabed, including the acquisition of information about the location of submerged rocky bodies and the depth of these bodies may turn out to be natural traps for the trapping of oil in case of leaks, and obtain the relationship between types of bed and the hydrodynamic conditions present in the region. In this context, for this study were collected bathymetric data (depth) and physical oceanographic (height of water column, water temperature, intensity and direction of currents, waves and turbidity), meteorological (rainfall, air temperature, humidity, winds and barometric pressure) of the access channel to the Port of Cabedelo / PB and its basin evolution (where the cruise ships dock), and includes tools of remote sensing (Landsat 7 ETM +, 2001), so that images and the results are integrated into Geographic Information Systems and used in the elaboration of measures aimed at environmental protection areas under the influence of this scale facilities, serving as a grant to prepare a contingency plan in case of oil spills in the region. The main findings highlight the techniques of using hydroacoustic data acquisition together bathymetric surveys of high and low frequency. From there, five were prepared in bathymetric pattern of Directorate of Hydrography and Navigation - DHN, with the depth in meters, on a scale of 1:2500 (Channel and Basin Evolution of Access to Port of Cabedelo), where there is a large extent possible beachrocks that hinder the movement of vessels in the port area, which can cause collisions, running aground and leaking oil. From the scatter diagram of the vectors of currents, it can be seen as the tidal stream and undergoes a channeling effect caused by the bidirectional effect of the tide (ebb and flood) in the basin of the Port of Cabedelo evolution in NW-direction SE and the highest speed of the currents occurs at low tide. The characterization weather for the period from 28/02 to 04/07/2010 values was within the expected average for the region of study. The multidisciplinary integration of products (digital maps and remote sensing images), proved to be efficient for the characterization of underwater geomorphological study area, reaching the aim to discriminate and enhance submerged structures, previously not visible in the images
Resumo:
The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing
Resumo:
An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths
Resumo:
The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application
Resumo:
The human respiratory system was so designed that would allow efficient ventilation, regardless of variations in the external environment that may hinder the act of breathing, such an act involves dozens of variables, among them we find the respiratory depression, which is nothing more than respiratory muscle strength. The pressures are widely used in several cases: Neuro-muscular; evolution of pulmonary dysfunction and a predictor for discontinuation of mechanical ventilation. Therefore it was proposed to carry out evaluations of these respiratory pressures for children and adolescents aged 10 to 16 years and propose a predictive equation that involves the anthropometric variables age (A, years), body mass (BM, kilograms) and height (H, meters) with maximal respiratory pressures (maximum inspiratory and expiratory pressure). Evaluations were performed in this age group of students in public and private schools of the Grande Natal , measurements were performed using the analogue manometer, were children and adolescents and their parents gave informed consent. 517 samples were taken, and 250 for males (M), 255 for females (F) and 12 were excluded according to our exclusion criteria. The sample was subdivided into three age groups (10-11, 12-13 and 14 to 16 years old). It was found through the student s t test (p ≤ 0.05) for all variables studied, children and male adolescents had higher means than females, except for the MC. For the correlation between the variables found significant correlation (p <0.05) among all the variables when analyzed as pairs except between MIP and height for females. The development of predictive equations (for p ≤ 0.05) based on three types of strategies adopted were restricted to two association between anthropometric variables isolated, resulting in: for males: MIP = -32.29 + (-2.11*A) + (-0.52*BM), MIP = 9.99 + (-0.36*BM) + (-49.40*H); MEP = 18.54 + 3.53*A + 0, 42*BM, MEP = -33.37 + 2.78*A + 52.18* H, MEP = -17.39 + 0.33*BM + 55.04*H; and, for females we find: MEP = 24.32 + 2.59 * A + 0.24*BM
Resumo:
The objective of this study of comparative descriptive character went aimed at to analyze the characteristics dermatoglyphics, anthropometrics and the basic physical qualities, in 180 selected scholars in a stratified way, distributed like this: 10 year-old boys = 32; 09 years = 32; 08 years = 32; 10 year-old girls = 28; 09 years = 28; 08 years = 28), studying the fundamental teaching of the School Good Municipal Hope, located in the area east, in the Neighborhood of the Crowned, in the city of Manaus, Amazon. For identification of the dermatoglyphics characteristics collected, was the fingerprints; for evaluation of the corporal mass, height and IMC, they were used a digital scale with an estadiometer of the mark Filizola. The tests: to sit down and to reach flexibility); Horizontal Impulse or I jump in distance stopped (force of inferior members); Flex and extension of the trunk (it Forces abdominal); Flexion and extension of the arms in suspension in the bar (Force of superior members); 30 meters (Speed) and 9 minutes (Resistance applied aerobic) was to evaluate the basic physical qualities. The results demonstrated that differences didn't exist among the goods, in most of the studied variables, and the existent differences among the ages of 8, 9 and 10 years, they demonstrate a normality tendency in the infantile development
Resumo:
The aim of this research was to analyse genetic markers, anthropometry and basic physical qualities in the differret stages of sexual maturation in swimmers in Paraíba. It is characterised as a descriptive cross sectional study. The sample was composed of 119 swimmers (males) that were divided among the stages of sexual maturation, from 7 to 17,9 years of age. They were associated to a local federation, the Confederação Brasileira de Desportes Aquáticos. The tests used were: genetic markers dermatoglyphics; Anthropometry body mass, stature, arm span, fat percentage and somatotype; physical qualities speed tests (25 meters crawl), strength (vertical jump) to inferior limbs, verarm throwing arremesso of a 2kg medicineball to superior limbs and abdominal), resistence (12 minutes to swimming), agility (he multistage 20-meter shuttle run test), flexibility (sit and reach test ) and coodination (stroke index); power of swimming (mean velocity in 25 meters mutiplied by body mass) and the self assessment of the sexual maturation supervised by a pediatric specialist. In the analyses we used the test normality of Shapiro-Wilk, then, we used ANOVA- one way followed by Post-Hoc test of Scheffé. The data showed in dermatogliphics a genetic tendence to velocity (L>W) with a predominance of the meso-ectomorphic somatotype profile; in relation to the physical qualities there was an evolution of the results in every stage due to the antropometric variables, except in the coordination tests. There were no significative differences between the stages. We conclude that swimming in Paraíba is composed of a signicative number of velocists with a mesomorph somatotype profile and low fat percentage, and that made it posssible to us to recomend that the trainings must be individual and according to personal characteristics of each athlete, and that the used variables must be specific for every region of the country. This dissertation presents a relation of multidiciplinar interface and its content has an application in Physical Education and Medicine
Resumo:
Individual lifestyle includes health and risk behaviors that can altar health status. Excess weight is a public health problem of modern civilization and there is an estimated mean prevalence of 45% in European countries. In Spain, the Murcia Region is an area of high morbidity and mortality from cardiovascular disorders. In this study we assess the differences in health and risk behaviors in ove/weight and normal weight undergraduates at the Universidad Católica San Antonio de Murcia (UCAM). Methods: Transversal design of parallel groups (overweight - cases and normal weight - control) , formed using the anthropometric technique. A questionnaire applied to a sample of 471 undergraduates of either sex, between the ages of 18 and 29 years, enrolled in 4 bachelor degree courses (ADE, CA, PER, PUB) at UCAM. We performed a standardized measurement of body mass (weight in kg), height (in meters) using a Seca® scale with calibrated stadiometer, waist and hip circumferences (in cm) with an inelastic tape and skinfolds thickness (triceps and subscapular in mm) with a Holtain® caliper, to calculate body mass index (BMI), waist-to-hip ratio (WHR) and the sum of skinfolds (SSF). We applied a lifestyle questionnaire about alcohol and tobacco consumption, knowledge and behaviors related to health indicators (arterial pressure and cholesterol), diet and physical activity. The information was collected in April and May, 2001 at the UCAM laboratory of Applied Nutrition. Statistical analysis: analysis of independent groups, contingency tables that reveal which qualitativa variables show differences and associations between the groups, Pearson's chi-square,and a significance levei of p < 0.05 followed by a residual analysis (1.96). Descriptive statistics (mean and standard deviation) were used to establish the two groups: case and contrai with 65 men and 26 women each who had BMI < 25 kg/m2. Results: A total of 65 of the men assessed (14%) and 26 (6%) of the women were overweight. Mean body mass index of the case group was 27. 78 ±: 2.83 kg/m2 in the men and 26.26 ± 1.37 kg/m2 in the women, while contrai group men had mean BMI of 22.36 ± 1.72 kg/m2, while for the women it was 20.76 ±: 2.13 kg/m2. The self-declared values of weight and height were underestimated, but with high accuracy, sensitivity and specificity. Thus, these can be used to calculate the BMI of overweight Spanish undergraduates. Regular vigorous physical activity was observed only in normal weight men. The analysis showed the following significant differences for the qualitativa variables of the two groups. The contrai group was interested in arterial hypertension, believed that they were not overweight, that they had no abdominal fat, and had not considered controlling 'fatty food consumption. Those who thought of controlling it sometimes, did so without professional help. However, part of the overweight group believed that they were overweight and had abdominal fat between average and considerable, had often or always considered controlling fatty foods and had often or always tried to control consumption with the help of professionals. They had always thought of engaging in physical activities, unlike the normal weight individuals. Nearly all (95%) of the overweight undergraduates and most (75%) of the normal weight group reported that they sometimes or always controlled fatty food ingestion. Mean physical activity was nearly twice as high in the summer than in the winter. Conclusions: The overweight undergraduates in this sample displayed a lifestyle with a greater number of healthy behaviors when compared to normal weight individuals
Resumo:
The reef area of Pirangi beach has been experiencing antropogenic actions, mainly due to tourism activity. In order to evaluate these effects, surveys on seaweeds were conducted at nine stations located over the fringing reef. Benthic community (seaweeds/corals) were identified using the photoquadrat method, with 50 meters random transects located paralleled to the coast. The general categories evaluated in each transect were: rock, sand, seaweeds, corals and mollusks. Data achieved were processed at Coral Point Count with Excel Extensions software. A total of 30 seaweed species, 5 coral species and 1 mollusk species were identified. There was a high dominance of short algae at stations with high tourism pressure, whereas frondose algae usually occurred at places without human interference. Seaweeds with the highest percent cover were composed by Sargassum vulgare (59%), Caulerpa racemosa (47%) and Dictyopteris delicatula (33%). Cluster analyses considering benthic organisms revealed five benthic features: (1) submersed area characterized by a diversified marine flora; (2) area with dominance of Caulerpa racemosa and presence of Millepora alcicornis; (3) area with high cover of Sargassum vulgare; (4) trampling area characterized by bare rocks, short algae and Zoanthus sociatus and (5) area with high coverage of Palythoa caribaeroum. Obtained data suggest that the studied area has been damaged by tourism activities. Furthermore, observed differences in algal communities may be a good indicator of ecosystem health of Pirangi reefs
Resumo:
In northeastern Brazil, Octopus insularis is the most commercially important cephalopod species and its capture has been performed for several years by the lobster fishermen in the region. In order to obtain information about the reproductive biology, 1108 specimens were collected between November 2009 and September 2011 in the landings and fish markets of Rio do Fogo (RN). For each specimen the mantle length (CM) and total fresh weight (PT) were recorded. Gonads of 264 males and 295 females were examined macroscopically and histologically to assess sexual maturation and determine reproductive indices. Four reproductive stages were determined for males (immature, maturing, mature and post-mature) and females (immature, early maturing, late maturing and mature). The average of eggs recorded in the female s gonads was 93.820 and 39 was the average of spermatophores found in male Needham s complex. Spermathecae with sperm were found in females with 69 mm CM (immature). Males and females become sexually mature at 64.41 and 98.50 mm of CM, respectively. The weight at sexual maturity was 270 g for males and 630 g for females. The values of the size and weight at sexual maturity found in this study show that males mature at smaller sizes than females. For both sexes the maturation peaks occurred in February and November 2010 and also in September 2011. The periods of maximum reproductive activity lasted about 3 months and it seems to occur every 7 10 months. Only one spent female (stage V) was found and the number of mature females was low. Presumably, mature females migrate to deep waters with complex habitat to protect the offspring, indicating that fishery by snorkeling with maximum depth of 15 meters is not reaches this part of the stock. Finally, it is noticeable the importance of the establishment of management strategies for the exploitation of O. insularis different of the ones used for O. vulgaris, once the species have distinct biological features
Resumo:
In the late 1970s, the semi-arid region of Rio Grande do Norte was the setting of Projeto Baixo-Açu whose highlight was the building of the dam Eng. Armando Ribeiro Gonçalves, designed to collect 2.4 billion cubic meters of water. Presumably, such an initiative would bring economic and social development for thousands of potiguares who suffered the hardships of drought. However, the dam would reach several cities in the region, reaching to cover one of them: São Rafael. As a result, the early years of the 1980s, nearby, a new town was built by DNOCS. This thesis aims to discuss how the population of São Rafael recalls this fact and reconstructs its history by speaking, writing and computing, after three decades. Based on the prospect moriniana method as a strategy, visits were made to the city of São Rafael and open interviews (individual and collective) with two groups of subjects: one composed of those who lived in their ancient homeland, and another, with young people who were born in the new city. Besides the reports of these subjects, they were observed the visual narratives presented by images, mostly photographic, available on a profile created for the city in the orkut social network. As sources for this study, they were also considered the dialogues between rafaelenses accessing the above profile. Having as a central observation by Edgar Morin about what does not regenerate, degenerates . This study is the central argument that the idea of orkut has performed, today, a dual and interdependent role: being a tool that promotes a collective intelligence through cooperation, exchange of ideas and reconstitution of visual and written narratives. Far from a frozen conception in a historical perspective, it has defended the thesis that orkut has regenerated, repaired, reproduced, restored, reorganized and renewed the memory and history of a city that has succumbed to the immensity of the waters of a dam for almost thirty years
Resumo:
The Oil Measurement Evaluation Laboratory (LAMP), located in the Federal University of Rio Grande do Norte (UFRN), has as main goal to evaluate flow and BS&W meters, where the simulation of a bigger number of operation variable in field, guarantees a less uncertain evaluation. The objective of this work is to purpose a heating system design and implementation, which will control the temperature safely and efficiently in order to evaluate and measure it. Temperature is one of the variables which influence the flow and BS&W accurate measurement, directly affecting the fluid viscosity and density in the experiment. To project the heating system it is of great importance to take the laboratory requirements, conditions and current restrictions into consideration. Three alternatives were evaluated: heat exchanger, internal resistance and external resistance. After the analyses are made in order to choose the best alternative for the heating system in the laboratory, control strategies were determined for it, PID control methods in combination with fuzzy logic were used. Results showed a better performance with fuzzy logic than with classic PID