Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Análise paramétrica do método de injeção alternada de água e CO2(WAG) em reservatórios de petróleo

After the decline of production from natural energy of the reservoir, the methods of enhanced oil recovery, which methods result from the application of special processes such as chemical injection, miscible gases, thermal and others can be applied. The advanced recovery method with alternating - CO2 injection WAG uses the injection of water and gas, normally miscible that will come in contact with the stock oil. In Brazil with the discovery of pre-salt layer that gas gained prominence. The amount of CO2 present in the oil produced in the pre-salt layer, as well as some reservoirs is one of the challenges to be overcome in relation to sustainable production once this gas needs to be processed in some way. Many targets for CO2 are proposed by researchers to describe some alternatives to the use of CO2 gas produced such as enhanced recovery, storage depleted fields, salt caverns storage and marketing of CO2 even in plants. The largest oil discoveries in Brazil have recently been made by Petrobras in the pre -salt layer located between the states of Santa Catarina and Espírito Santo, where he met large volumes of light oil with a density of approximately 28 ° API, low acidity and low sulfur content. This oil that has a large amount of dissolved CO2 and thus a pioneering solution for the fate of this gas comes with an advanced recovery. The objective of this research is to analyze which parameters had the greatest influence on the enhanced recovery process. The simulations were performed using the "GEM" module of the Computer Modelling Group, with the aim of studying the advanced recovery method in question. For this work, semi - synthetic models were used with reservoir and fluid data that can be extrapolated to practical situations in the Brazilian Northeast. The results showed the influence of the alternating injection of water and gas on the recovery factor and flow rate of oil production process, when compared to primary recovery and continuous water injection or continuous gas injection

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Sistema de detecção e isolamento de falhas em sistemas dinâmicos baseado em identificação paramétrica

The present research aims at contributing to the area of detection and diagnosis of failure through the proposal of a new system architecture of detection and isolation of failures (FDI, Fault Detection and Isolation). The proposed architecture presents innovations related to the way the physical values monitored are linked to the FDI system and, as a consequence, the way the failures are detected, isolated and classified. A search for mathematical tools able to satisfy the objectives of the proposed architecture has pointed at the use of the Kalman Filter and its derivatives EKF (Extended Kalman Filter) and UKF (Unscented Kalman Filter). The use of the first one is efficient when the monitored process presents a linear relation among its physical values to be monitored and its out-put. The other two are proficient in case this dynamics is no-linear. After that, a short comparative of features and abilities in the context of failure detection concludes that the UFK system is a better alternative than the EKF one to compose the architecture of the FDI system proposed in case of processes of no-linear dynamics. The results shown in the end of the research refer to the linear and no-linear industrial processes. The efficiency of the proposed architecture may be observed since it has been applied to simulated and real processes. To conclude, the contributions of this thesis are found in the end of the text

Estimação paramétrica e não-paramétrica em modelos de markov ocultos

In this work we study the Hidden Markov Models with finite as well as general state space. In the finite case, the forward and backward algorithms are considered and the probability of a given observed sequence is computed. Next, we use the EM algorithm to estimate the model parameters. In the general case, the kernel estimators are used and to built a sequence of estimators that converge in L1-norm to the density function of the observable process

Análise paramétrica da estabilidade de falésias e estudo de caso da Ponta do Pirambu em Tibau do Sul/RN

The coastline from Rio Grande do Norte state is characterized for the presence of dunes and cliffs. The latter consist of slopes with height up to 40 meters and inclinations ranging from 30° to 90° wich horizontal. Thus, this dissertation had as objective the evaluation of the stability of cliff from Ponta do Pirambu in Tibau do Sul/RN, and the realization of a parametric study on the stability of a homogeneous cliff considering as variables the material's cohesion, the cliff height and the slope inclination. The study in Ponta do Pirambu considered yet the possibility of the existence of a colluvial cover with thickness ranging from 0.50 to 5.00 meters. The analyzes were performed by Bishop method, using GEO5 software. In parametric analysis were produced graphics that relate height cliff with the inclination, to safety factors equals to 1.00 and 1.50; besides graphics where it is possible easily get the lowest safety factor as from the cohesion, cliff height and its inclination. It was concluded that these graphs are very useful to preliminary analyzes, for the definition of critical areas in risk mappings in areas of cliffs and for determination of an equation for obtaining the lowest safety factor function of the strength parameters and of slope geometry. Regarding the cliff from Ponta do Pirambu, the results showed that the cliff is subject to superficial landslides located in the points where may there be the presence of colluvium with thicknesses greater than two meters. However, the cliff remains stable presenting the global safety factor equal or superior to 2.50 in the saturated condition.

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Análise paramétrica do método de injeção alternada de água e CO2(WAG) em reservatórios de petróleo

After the decline of production from natural energy of the reservoir, the methods of enhanced oil recovery, which methods result from the application of special processes such as chemical injection, miscible gases, thermal and others can be applied. The advanced recovery method with alternating - CO2 injection WAG uses the injection of water and gas, normally miscible that will come in contact with the stock oil. In Brazil with the discovery of pre-salt layer that gas gained prominence. The amount of CO2 present in the oil produced in the pre-salt layer, as well as some reservoirs is one of the challenges to be overcome in relation to sustainable production once this gas needs to be processed in some way. Many targets for CO2 are proposed by researchers to describe some alternatives to the use of CO2 gas produced such as enhanced recovery, storage depleted fields, salt caverns storage and marketing of CO2 even in plants. The largest oil discoveries in Brazil have recently been made by Petrobras in the pre -salt layer located between the states of Santa Catarina and Espírito Santo, where he met large volumes of light oil with a density of approximately 28 ° API, low acidity and low sulfur content. This oil that has a large amount of dissolved CO2 and thus a pioneering solution for the fate of this gas comes with an advanced recovery. The objective of this research is to analyze which parameters had the greatest influence on the enhanced recovery process. The simulations were performed using the "GEM" module of the Computer Modelling Group, with the aim of studying the advanced recovery method in question. For this work, semi - synthetic models were used with reservoir and fluid data that can be extrapolated to practical situations in the Brazilian Northeast. The results showed the influence of the alternating injection of water and gas on the recovery factor and flow rate of oil production process, when compared to primary recovery and continuous water injection or continuous gas injection

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Ecologia trófica de anfíbios anuros: relações filogenéticas em diferentes escalas

Understand the origin, maintenance and the mechanisms that operate in the current biodiversity is the major goal of ecology. Species ecology can be influenced by different factors at different scales. There are three approaches about the ecological differences between species: the first brings that differences result from current processes on niche characteristics (e.g. diet, time, space); the second that species differences are explained by random patterns of speciation, extinction and dispersion, the third that historical events explain the formation and composition of species in communities. This study aims to evaluate the influence of phylogenetic relationships in determining ecological characteristics in amphibians (globally) and test with that, if ecological differences between species of frogs are the result of ancient pre-existing differences or as result of current interactions. Another objective of this study is to verify if ecological, historical or current characteristics determine the size of species geographical distribution. The diet data for analysis of trophic ecology were collected from published literature. We performed a non-parametric MANOVA to test the existence of phylogenetic effects in diet shifts on frogs history. Thus, it is expected to know the main factors that allow the coexistence of anuran species. We performed a phylogenetic regression to analyze if niche breadth, body size and evolutionary age variables determine the size of the geographical distribution of amphibians in the Amazon. In the present study, new contributions to knowledge of major ecological patterns of anurans are discussed under a phylogenetic perspective

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Estudo dos parâmetros operacionais do processo de combustão in situ em reservatório de petróleo pesado

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Biodistribuição do pertecnetato de sódio (Na99mTcO4) em ratos submetidos à ressecção extensa de intestino delgado

Massive resection of the small intestine results in short bowel syndrome with anti-absorptive effect and repercussions on the metabolism. Morphologic and functional evaluation may be necessary in order to control wrapped organs. Scintigraphy an examination with little invading and no biologic damage can be used. The purpose were to assess the biodistribution of sodium pertecnetate in organs of rats subjected to massive resection of the small intestine, the intestinal adaptation of the remnant intestinal mucosa and weight curve evaluation in the postoperative period. Twenty-one Wistar rats were randomly allocated into three groups (n = 7). The operated group named short bowel (SB) after anesthetized was subjected to massive resection of the small intestine; the control group (C), and sham group (SHAM). On the 30th postoperative day, 0.l mL of sodium pertechnetate was injected into the venous orbital plexus. After 30 minutes, the rats were killed with an overdose of anesthetic, and fragments of the liver, spleen, pancreas, stomach, duodenum, small intestine, thyroid, lung, heart, kidney, bladder, muscle, femur and brain were harvested. The percentage of radioactivity per gram of tissue (%ATI/g) was determined using Gama Counter WizardTM 1470, PerkinElmer to all samples. Biopsies of 3 cm remaining jejunum were removed to histological analyses. Analysis of variance (ANOVA) and the Tukey test for multiple comparisons were used, considering p<0.05 as significant. The study had the participation of some departments and laboratories, as Nucleus of Experimental Surgery, Department of Surgery, Laboratory of Radiobiology, Department of Pathology and Service of Nuclear Medicine, certifying the character of a multidisciplinary research. The results were no significant differences in %ATI/g of the sodium pertechnetate in the organs of the groups studied (p>0.05). An increase in the weight of the SB rats was observed after the second postoperative week. The jejunal mucosal thickness of the SB rats was significantly greater than that of C and sham rats (p<0.05. The biodistribution of sodium pertechnetate was not affected by massive intestinal resection in rats. An adaptive response by the intestinal mucosa probably contributed to the reversion of weight loss and the biodistribution of sodium pertechnetate was not affected by the surgery

Influência da hereditariedade nas capacidades motoras, na aptidão física e antropometria

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Tornar-se, ser e viver do professorado: entre regularidades e variações identitárias

The main aim of this research has been to analyze the identity patterns of the teacher s staff of fundamental education public schools in the Metropolitan Area of Natal-RN. It sets out from the hypothesis that being a teacher within this context grows out of the regularities of a specific habitus, which, according to Bourdieu, develops into mental schemes of thought and action within a specific social group. This habitus forms the basis on which is built the social representation of being a teacher prevailing in the group, as well as the symbolic differences that typify its identity variations. Three data sources have been fundamental in building up this thesis: (a) formative essays of students graduating from a Higher Teacher s Formation Course, as well as observing some of the public defense of these essays during field work; (b) a questionnaire aimed at classifying economically, socially, and culturally a sample of public teachers of the Natal-RN county; and (c) submitting a sub-sample of this group to the process of Multiple Classification Procedures (MCP). The analysis of data was done according to the multidimensional, non-parametric statistical procedures of both the Category Content Analysis and Enunciation Analysis methods. The results of the analysis took into account an ample set of variables, its associations and implications, the cultural and social profile of the population under scrutiny, their life styles, as well as the strategies they developed in the process of becoming a teacher, and the social representation of being a teacher . We came to the conclusion that the social identity of the teachers corps, or as we prefer to say it being a teacher , is a result of a set of regularities produced by the habitus that gives social shape and meaning to the existence of the group proper. We note the existence of identity variations caused by the variables (a) educational level; and (b) mode of action in fundamental education (if these are the first or last grades where the subjects operate). However, these variations will not break the power of the regularities that give shape, meaning, and social visibility to the group. The social representation of being a teacher points to the tensions, ambiguities, and trends inherent to common sense, as well as to a strong tendency to reassign a new meaning to being a teacher. Our thesis, therefore, is that the identity configuration of the teachers corps under scrutiny is characterized by an integrative synthesis, by-product of a habitus that is superimposed, and at the same time co-exists with different identity variations