Síntese e caracterização de látices acrílicos reticulados com (1,6-diacrilato propoxilato hexanodiol) via polimerização em emulsão

Latices based on acrylic acid and ethyl methacrylate, crosslinked with 1,6‐propoxylate‐hexanodiol diacrylate were synthesized via emulsion polymerization with different monomeric compositions. The resultant latices were thickened with different NaOH/(acrylic acid) molar ratios and were characterized by titrimetry, zeta potential measurements, turbidimetry, and capillary viscometry. Intrinsic viscosity was determined for an uncrosslinked copolymer, using toluene as solvent. All the latices were coagulated with NaCl and washed with water at 60°C analyzed by FTIR spectrophotometry, in order to characterize functional groups from the copolymer and crosslinking agent.

Caracterização de látices acrílicos em função da neutralização de seus grupos carboxilas

Latexes based on acrylic acid, acrylamide, ethyl methacrylate, and ethyl acrylate were synthesized via emulsion polymerization with different monomer compositions. The resultant latices were thickened with different molar ratios of NaOH to acrylic acid and were analyzed in terms of acid‐basis titrimetry, turbidimetry, rheology, and tensiometry. Titrimetry, turbidimetry, and rheometry were used to analyze factors such as carboxyl group availability and particle solubilization, tensiometry monitoring the influence of carboxyl neutralization on polymer‐surfactant interactions. For the acrylic acid content used in this work (20 wt%), the results indicated that as carboxyl groups distribution became more homogeneous, the process of latex thickening became more effective

Partículas inteligentes de poli (nisopropilacrilamida), quitosana e poli (ácido acrílico): efeito da temperatura e do pH sobre suas propriedades em suspensões aquosas

The present study describes the stability and rheological behavior of suspensions of poly (N-isopropylacrylamide) (PNIPAM), poly (N-isopropylacrylamide)-chitosan (PNIPAMCS), and poly (N-isopropylacrylamide)-chitosan-poly (acrylic acid) (PNIPAM-CS-PAA) crosslinked particles sensitive to pH and temperature. These dual-sensitive materials were simply obtained by one-pot method, via free-radical precipitation copolymerization with potassium persulfate, using N,N -methylenebisacrylamide (MBA) as a crosslinking agent. Incorporation of the precursor materials into the chemical networks was confirmed by elementary analysis and infrared spectroscopy. The influence of external stimuli such as pH and temperature, or both, on particle behavior was investigated through rheological measurements, visual stability tests and analytical centrifugation. The PNIPAM-CS particles showed higher stability in acid and neutral media, whereas PNIPAM-CS-PAA particles were more stable in neutral and alkaline media, both below and above the LCST of poly (Nisopropylacrylamide) (stability data). This is due to different interparticle interactions, as well as those between the particles and the medium (also evidenced by rheological data), which were also influenced by the pH and temperature of the medium. Based on the results obtained, we found that the introduction of pH-sensitive polymers to crosslinked poly (Nisopropylacrylamide) particles not only produced dual-sensitive materials, but allowed particle stability to be adjusted, making phase separation faster or slower, depending on the desired application. Thus, it is possible to adapt the material to different media

Preparo e caracterização de membranas de quitosana modificadas com poli (ácido acrílico)

The aim of this study was to generate an asymmetric biocompactible and biodegradable chitosan membrane modified by the contact with a poly(acrylic acid) solution at one of its sides at room temperature and 60◦C. The pure chitosan membrane, as well as the ones treated with poly(acrylic acid) were characterized by infrared spectroscopy (FTIRATR) at angles of 39◦, 45◦ and 60◦ , swelling capacity in water, thermal analysis (TG/DTG), scanning electronic microscopy (SEM) and permeation experiments using metronidazole at 0,1% and 0,2% as a model drug. The results confirmed the presence of ionic interaction between chitosan and poly(acrylic acid) by means of a polyelectrolyte complex (PEC) formation. They also showed that such interactions were more effective at 60◦C since this temperature is above the chitosan glass transition temperature wich makes the diffusion of poly(acrylic acid) easier, and that the two treated membranes were asymmetrics, more thermically stable and less permeable in relation to metronidazole than the pure chitosan membrane

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Desenvolvimento de uma planta piloto para estudos de poços de petróleo produzindo por plunger lift

This document proposes to describe a pilot plant for oil wells equipped with plunger lift. In addition to a small size (21,5 meters) and be on the surface, the plant s well has part of its structure in transparent acrylic, allowing easy visualization of phenomena inherent to the method. The rock formation where the well draws its pilot plant fluids (water and air) is simulated by a machine room where they are located the compressor and water pump for the production of air and water. To keep the flow of air and water with known and controlled values the lines that connect the machine room to the wellhole are equipped with flow sensors and valves. It s developed a supervisory system that allows the user a real-time monitoring of pressures and flow rates involved. From the supervisor is still allowed the user can choose how they will be controlled cycles of the process, whether by time, pressure or manually, and set the values of air flow to the water used in cycles. These values can be defined from a set point or from the percentage of valve opening. Results from tests performed on the plant using the most common forms of control by time and pressure in the coating are showed. Finally, they are confronted with results generated by a simulator configured with the the pilot plant s feature

Desenvolvimento de protótipo de coletor automático destinado à coleta de amostras de água em corpos aquáticos para análise em laboratório

The aim of this approach is to describe the design and construction of a low-cost automated water sampler prototype. In recent years, there is an increasing need on the use of automated equipments for hydro climatic variables to be use in urban and rural environments. Such devices are always used to provide measured information which is of crucial importance on the development of water resources strategies at watershed scale. Actually, many research and water public institutions have been using these kinds of equipments. In most of the cases, automated equipments are expensive and need to be imported, generating a situation of technologic dependency. The prototype is based on an electronic system which controls a peristaltic pump functioning, five solenoid valves and an ultrasonic sensor connected to a datalloger. An interface with the user allows communication with a PC, when the equipment functioning parameters can be provided. The equipment has a hydraulic module composed by a 12V peristaltic pump connected to a distribution circuit composed by five solenoid valves, one of them being used to clean the circuit before each sampling procedure. Samples are collected by four 1.95 polyethylene bottles. The sampler body was made of acrylic material, with a cylindrical shape, and dimensions 0.72 m and 0.38 m height and diameter, respectively. The weight of the equipment without samples is approximately 15 kg, which infers to its portability. The prototype development total cost budget was approximately US$ 1,560.00. Laboratory tests aimed to evaluate the equipment performance and functioning demonstrated satisfactory results

Resposta comportamental e hormonal de machos não reprodutores de sagüi, callithrix jacchus, a estímulos sensoriais de filhotes não aparentados

Parental care in mammals is influenced by somatosensory stimuli from infants, such as vocalization and sight and by changes in the hormone levels of caretakers. The aim of this study was to evaluate the behavioral and hormonal responses of twelve non reproductive adult male common marmosets (Callithrix jacchus) to infant cues, vocalization recordings, sight and physical contact with newborn. Six out of twelve males had previous experience in caretaking. In article 1, adult males were exposed to newborn vocalizations for 10 minutes. On control condition no sound was presented. In article 2, males were tested on two conditions: a) Control: an empty acrylic transparent box (test box) was placed in male s cage for 15 minutes, and b) Experimental: males were exposed to newborns into a closed text box for 15 minutes. The cage was kept closed to prevented from tactile, smell and acoustic stimulation by the infant on common marmoset males. In article 3, males were exposed to an open or closed text box, which allowed or not their access to and social interaction with the infants. After each observation sessions, blood samples were collected to evaluate the cortisol levels of males. In all studies, behavioral response of adult males was significantly modified by newborns sight, vocalization and physical contact. Males approached and spent more time near the sound source and showed an increase in locomotion during sound exposure. Furthermore, males approached, smelled and spent more time near the test box when the newborn was inside it. There was no difference in behavioral pattern between experienced and non-experienced males in articles 1 and 2. In article 3, behavioral pattern of males was influence by previous caretaking experience. Experienced males recovered quicker and carried the infants more than the inexperienced ones. However, inexperienced males showed a decrease in recovery latency and an increase in carrying time after successive exposure to infants. Cortisol levels changed after exposure to infant s vocalization, especially for experienced adult males. Male hormonal profile was not affected by the sight of infants neither by their previous experienced in caretaking. The occurrence of social interaction between the caretaker and infant did not modify the hormonal profile of common marmoset males; however, as much as experienced males carried the infants their cortisol levels decreased. Thus, members of a social group or potential caretakers common marmosets exposed to sensory cues from dependent infant such as vocalization, sight, smell and physical contact, changed their behavioral and hormonal responses that are physiological modulators of parental behavior in common marmoset

Papel de sinais cromáticos na identificação de parceiros sexuais em sagüi comum (callithrix jacchus)

The literature concerning color vision shows a trichromatic advantage in detecting ripe fruits and young leaves, but there are contradictory results. There is also the suggestion of this type of vision being adapted to perceive socio-sexual signals. Indeed, Old World primates utilize the skin color of conspecifics as a factor of attraction. But in New World primates there is no record of a coloration signal in the body that can be utilized by other group members. The present study aims to: 1- test whether there is a relation between coloration of body regions and ovulatory cycle in female Callithrix jacchus; 2- Determine if this species uses visual signals to choose mates that are sexually receptive. We collected feces from six females during one month to quantify progesterone concentration by EIA. Body region coloration was measured using a portable spectrometer and modeled to obtain the quantum catch of each photoreceptor, the opponency channels and chromatic distance between the points in units of JND. We recorded the behavior of six males exposed to three pairs of females with a cycling and a non-cycling female in each pair using a transparent plexiglass apparatus. The color of different body regions presented a correlation between progesterone concentration and the yellow-blue and red-green visual axes, with the genitalia as the region showing the highest correlation. The visual axis more apt to see the color variations was the yellow-blue in dichromats, and in trichromats were the red-green to face, yellow-blue to abdomen and both chromatic axes to genitalia. There was no difference in the signal detectability between trichromats and dichromats, but the perception pattern differed between the phenotypes, with a better signal detection by the dichromat phenotype 562 and the trichromat phenotype 543/562. During the behavioral experiments males presented longer gaze duration in periods of experimental manipulation and gaze duration was always longer towards cycling females compared to non-cycling females. Male locomotion during experimental manipulation was greater than in the control only during the periovulatory period of the female, indicating greater excitement. The behavior of cycling females was more active than the behavior of the non-cycling ones regarding locomotion and touching of the plexiglass division of the apparatus. Male gaze duration to cycling females increased with decreasing progesterone concentration, but none of the coloration parameters was correlated to the mate preference exhibited. This coloration signal can transmit information to animals of the group about fertility of female. Different from the intense red of the genitalia swellings of Old World primates, marmoset female genitalia became more bluish-green in the fertile period. Males chose fertile females and were able to visually identify the periovulatory period of females. Choice is related to progesterone concentration, but our results do not show relation between coloration and mate preference. Maybe some behavioral measure is associated with the choice

O papel das rotas e da obtenção de informações sobre a eficiência no forrageio de dinoponera quadriceps em ambiente natural

In this study, we investigated the role of routes and information attainment for the queenless ant species Dinoponera quadriceps foraging efficiency. Two queenless ant colonies were observed in an area of Atlantic secondary Forest at the FLONA-ICMBio of Nisia Floresta, in the state of Rio Grande do Norte, northeastern Brazil, at least once a week. In the first stage of the study, we observed the workers, from leaving until returning to the colony. In the second stage, we introduced a acrylic plate (100 x 30 x 0,8 cm) on a selected entrance of the nest early in the morning before the ants left the nest. All behavioral recordings were done through focal time and all occurence samplings. The recording windows were of 15 minutes with 1 minute interval, and 5 minute intervals between each observation window. Foraging was the main activity when the workers were outside the nest. There was a positive correlation between time outside the nest and distance travelled by the ants. These variables influenced the proportion of resource that was taken to the nest, that is, the bigger its proportion, the longer the time outside and distance travelled during the search. That proportion also influenced the time the worker remained in the nest before a new trip, the bigger the proportion of the item, the shorter was the time in the nest. During all the study, workers showed fidelity to the route and to the sectors in the home range, even when the screen was in the ant´s way, once they deviated and kept the route. The features of foraging concerning time, distance, route and flexibility to go astray by the workers indicate that decisions are made by each individual and are optimal in terms of a cost-benefit relation. The strategy chosen by queenless ants fits the central place foraging and marginal value theorem theories and demonstrate its flexibility to new informations. This indicates that the workers can learn new environmental landmarks to guide their routes

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes