Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

Um middleware como interface padrão para acesso a dispositivos biomédicos

A grande diversidade na arquitetura de dispositivos de hardware, aliada aos seus diferentes protocolos de comunicação, tem dificultado a implementação de sistemas que necessitam realizar o acesso a esses dispositivos. Diante dessas diferenças, surge a necessidade de prover o acesso a esses dispositivos de forma transparente. Neste sentido, o presente trabalho propõe um middleware mult entrada e saída para acesso a dispositivos, como forma de abstrair o mecanismo de escrita e leitura de dados em dispositivos de hardware, contribuindo desta forma, para o aumento na produtividade dos sistemas, uma vez que os desenvolvedores estão focados apenas nos seus requisitos funcionais

A experiência humana como estratégia : a comunicação como jogo & o jogo como comunicação

En la interface de las Ciencias Sociales y de la Comunicación, la tesis expone una discusión sobre la Comunicación Social como área de conocimiento y discute las bases fenomenológicas de la producción de significado utilitario sobre el mundo. Para dar cuenta de esa reflexión se tiene como referencia la película Slumdog Millionaire? del director Danny Boyle. La experiencia vivida por el personaje principal llamado Jamal Malik sirve de apoyo a su éxito en un programa de TV cuyos desafíos consigue vencer uno a uno y transformarse en un millonario. El film, y en consecuencia la trayectoria de Jamal, es el operador cognitivo para que se presente la estrategia del personaje que transforma su conocimiento experimental en conocimiento pertinente, objetivo. La investigación sirve de base para ofrecer el argumento central de que solo existe conocimiento por medio de la experiencia vivida. A partir de esa concepción, la comunicación es vista en este ensayo como entrecruzamiento de caminos y nudos que se asemejan a un rizoma donde cada construcción de sentido, cada palabra que gana significación representa diversos enlaces de esos nudos sistémicos. Aseguramos que la comunicación es una condición sine qua non a los humanos y puede ser comprendida por la paradoja natural-artificial. Es de esta paradoja, que presentamos una contribución de la complejidad de la comunicación creyendo de forma dialógica que sí, hay una condición innata de la comunicación (y así mismo post humana) concomitantemente con la hipótesis de la artificialidad comunicacional. Corroboramos así, la idea de que el conocimiento fenomenológico de la comunicación es un juego de la construcción científica y, por lo tanto, un juego de la humanidad. En este mismo juego podemos comprender la comunicación por intermedio de algunos macro conceptos de la compleja actividad de comunicar (retroalimentación, recursividad y holograma) constelando así una estrategia de ligazón/estímulo/respuesta que nos permite conocer bien y saber organizar mejor el conocimiento adquirido en la práctica. La tesis tiene como interlocutores principales Claude Lévi-Strauss, Edgar Morin, Jean-Marie Pelt, Norval Baitello Junior y Vilém Flusser, entre otros

Um sistema inteligente de classificação de sinais de EEG para Interface Cérebro-Computador

The Brain-Computer Interfaces (BCI) have as main purpose to establish a communication path with the central nervous system (CNS) independently from the standard pathway (nervous, muscles), aiming to control a device. The main objective of the current research is to develop an off-line BCI that separates the different EEG patterns resulting from strictly mental tasks performed by an experimental subject, comparing the effectiveness of different signal-preprocessing approaches. We also tested different classification approaches: all versus all, one versus one and a hierarchic classification approach. No preprocessing techniques were found able to improve the system performance. Furthermore, the hierarchic approach proved to be capable to produce results above the expected by literature

Comunicação gráfica em interfaces de hipermídia de educação a distância via web

This study aims to analyze the communication graphics of layouts of hypermedia interfaces oriented to Distance Education via the Internet. This proposal is justified by widening the offer of courses that modality and the consequent application of items of hypermedia for teaching-learning. The method of analysis involved the search nethnographic, addressed to the cycle student intermediary of the Training Program Continuing Medias in Education, and the evaluation heuristic of the interfaces of Virtual Learning Environment "E-Proinfo" and of the modules of the Cycle. This evaluation we observed the implementation of the attributes of usability and the degree of interactivity of each interface. The results revealed an inefficient implementation of the attributes of usability, which meant a consequent reduction of the levels of interactivity. As proposing the present Design Virtual Learning, a model of hypermedia layout, designed to generate usability for Virtual learning environments and extend the acquisition of literancy for students and tutors. This proposal design not hypermedia aims the demarcation of models pre-conceived, but the proposal of layout in which each element of hypermedia is applied with a view to generate a seaworthiness intuitive, more agile and efficient, in these ambients

Uma linguagem de modelagem da interação para auxiliar a comunicação designer-usuário

The development of interactive systems involves several professionals and the integration between them normally uses common artifacts, such as models, that drive the development process. In the model-driven development approach, the interaction model is an artifact that includes the most of the aspects related to what and how the user can do while he/she interacting with the system. Furthermore, the interactive model may be used to identify usability problems at design time. Therefore, the central problematic addressed by this thesis is twofold. In the first place, the interaction modeling, in a perspective that helps the designer to explicit to developer, who will implement the interface, the aspcts related to the interaction process. In the second place, the anticipated identification of usability problems, that aims to reduce the application final costs. To achieve these goals, this work presents (i) the ALaDIM language, that aims to help the designer on the conception, representation and validation of his interactive message models; (ii) the ALaDIM editor, which was built using the EMF (Eclipse Modeling Framework) and its standardized technologies by OMG (Object Management Group); and (iii) the ALaDIM inspection method, which allows the anticipated identification of usability problems using ALaDIM models. ALaDIM language and editor were respectively specified and implemented using the OMG standards and they can be used in MDA (Model Driven Architecture) activities. Beyond that, we evaluated both ALaDIM language and editor using a CDN (Cognitive Dimensions of Notations) analysis. Finally, this work reports an experiment that validated the ALaDIM inspection method

Um middleware como interface padrão para acesso a dispositivos biomédicos

A grande diversidade na arquitetura de dispositivos de hardware, aliada aos seus diferentes protocolos de comunicação, tem dificultado a implementação de sistemas que necessitam realizar o acesso a esses dispositivos. Diante dessas diferenças, surge a necessidade de prover o acesso a esses dispositivos de forma transparente. Neste sentido, o presente trabalho propõe um middleware mult entrada e saída para acesso a dispositivos, como forma de abstrair o mecanismo de escrita e leitura de dados em dispositivos de hardware, contribuindo desta forma, para o aumento na produtividade dos sistemas, uma vez que os desenvolvedores estão focados apenas nos seus requisitos funcionais