18 resultados para Interconnection

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The organizations are characterized as dynamic spaces, they are being revisited and redefined, because they constitute structural human spaces and new vain outlines won expression. As it begins, of the non consensus in its conception, it is explicit the complexity degree that is identified in the plurality and diversity, brought by the people that compose them, characterizing it as accomplishment space, of happiness and also of conflict, of relationships of power and organizational limits and from birth and burial of faiths, values, norms, symbols, knowledge and rituals, therefore, deeply human. In that way, to know the administration of the organization is preponderant condition for the format of the human relationships to be delineated in its living. Like this the work makes an option in knowing the social administration, this work tries to know and analyze the values and beginnings of the social administration; revealling characteristics and specificities of the organizational performance of UNIPOP that contribute to the formation of the conception of Social Administration, it tends as source of the information the managers of the institution; to identify the formative values of UNIPOP that contribute to the youths' partner-political action in the community, tends for reference the current students of the organization and last to evaluate values structurates and supporting that interconnection between the organizational Administration, formation youth's program, participation and autonomy and attendance, starting from the existences gained by the exits, of that program. This way, the research will be qualitative, looking for understanding starting from their documents, the existence of those values

Relevância:

10.00% 10.00%

Publicador:

Resumo:

T'his dissertation proposes alternative models to allow the interconnectioin of the data communication networks of COSERN Companhia Energética do Rio Grande do Norte. These networks comprise the oorporative data network, based on TCP/IP architecture, and the automation system linking remote electric energy distribution substations to the main Operatin Centre, based on digital radio links and using the IEC 60870-5-101 protoco1s. The envisaged interconnection aims to provide automation data originated from substations with a contingent route to the Operation Center, in moments of failure or maintenance of the digital radio links. Among the presented models, the one chosen for development consists of a computational prototype based on a standard personal computer, working under LINUX operational system and running na application, developesd in C language, wich functions as a Gateway between the protocols of the TCP/IP stack and the IEC 60870-5-101 suite. So, it is described this model analysis, implementation and tests of functionality and performance. During the test phase it was basically verified the delay introduced by the TCP/IP network when transporting automation data, in order to guarantee that it was cionsistent with the time periods present on the automation network. Besides , additional modules are suggested to the prototype, in order to handle other issues such as security and prioriz\ation of the automation system data, whenever they are travesing the TCP/IP network. Finally, a study hás been done aiming to integrate, in more complete way, the two considered networks. It uses IP platform as a solution of convergence to the communication subsystem of na unified network, as the most recente market tendencies for supervisory and other automation systems indicate

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work was developed an information system to apply the concepts of CAD3D-BIM technology for the design activities of the furniture industry. The development of this system was based in an architecture comprised of two modules: a web interface to management the metadata of models from furniture's library and the combination of three-dimensional CAD software with a specific plugin to access the information from this model. To develop this system was also used a Data Base Management System (DBMS) designed to storage the information from models in a hierarchical way, based on concepts of Group Technology (GT). The centralization of information in a single database allows the automatic availability of any changes to all participants involved in a particular project when it‟s happens. Each module from system has its own connection to this database. Finally was developed a prototype from a 3D virtual environment to help create Virtual Reality projects in the web. A study from available technologies to create 3D web applications for execution in websites was done to support this development. The interconnection between modules and the database developed allowed the assembly of a system architecture to support the construction and exhibition of projects of the furniture industry in accordance with the concepts proposed by BIM (Building Information Modeling), using as object of study the furniture industry of state of Rio Grande do Norte

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Starting from the premise that we live in the society of spectacle, as proclaimed by Guy Debbord, and, in this context, the media feeds itself off of this spectacularization and constructs a culture of images and production of goods, providing templates from which the subject can identify himself/herself as being male or female, successful or unsuccessful, powerful or powerless. In other words, the culture conveyed by the media produces material for the creation of identities through which individuals insert and recognize themselves in contemporary society. Observing the election campaigns, we can see clearly that this profusion of identities is fairly explored in the advertising propaganda used by the candidates, particularly in the propaganda broadcasted on the Free Electoral Time on TV. Instigated by the explicit relation between the media and politics within the society of the spectacle, this study aims to investigate the main identities that emerge in the discursive practices of the media in the election campaigns of 2010 for president of the Republic and governor of the State of Rio Grande do Norte that had as protagonists the candidates at that moment Dilma Rousseff (PT) for president and Rosalba Ciarline (DEM) for governor. To do so, we based ourselves on the theory of Bakhtin Circle, which considers the statement as a unit of verbal communication and conceives language as a dialogical phenomena and a discursive practice and also in the conceptions of dialogical relationships, social voices and chronotope formulated by the previous mentioned theory. Still in the theoretical field, we have established an interconnection with the theories coming from the Cultural Studies (Hall, Woodward) about the identity, which conceives it as multiple, fragmented, non-fixed, so that, the subject assumes different identities, not always coherent, at different times, depending on the context in which they are approached. The research is situated in the frames of Applied Linguistics, which considers language as the center of its studies and settles on the border of an open number of areas of knowledge expanding its possibilities of investigation by means of the interdisciplinary. Our corpus consists in 20 electoral propaganda videos aired on TV during the Free Election Time in 2010 campaign; among these, 14 videos are Dilma Rousseff s propaganda and 06 videos are Rosalba Ciarline s propaganda. We seek for the purpose of the analysis to identify the identities which emerge from the discourses about the candidates in propaganda videos broadcasted in the referred campaign, as well as realize the dialogical relations established in these discourses and even if the identity construction of these subjects is located in the same axiological axis. The corpus analysis revealed that the multiple cultural identities of the candidates campaigning emerge in the discourses circulating in the electoral propaganda aired on TV such as: the identities of pioneer woman, competent, sensitive, mother, grandmother, religious. And, yet, those are changeable as the electoral demands, in other words, the need to obtain support and votes, outline a fluid identity construction about the candidate to the position in question

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The study physical process that control the stellar evolution is strength influenced by several stellar parameters, like as rotational velocity, convective envelope mass deepening, and magnetic field intensity. In this study we analyzed the interconnection of some stellar parameters, as Lithium abundance A(Li), chromospheric activity and magnetic field intensity as well as the variation of these parameters as a function of age, rotational velocity, and the convective envelope mass deepening for a selected sample of solar analogs and twins stars. In particular, we analyzed the convective envelope mass deepening and the dispersion of lithium abundance for these stars. We also studied the evolution of rotation in subgiants stars, because its belong to the following evolutionary stage of solar analogs, and twins stars. For this analyze, we compute evolutionary models with the TGEC code to derive the evolutionary stage, as well as the convective envelope mass deepening, and derive more precisely the stellar mass, and age for this 118 stars. Our Investigation shows a considerable dispersion of lithium abundance for the solar analogs stars. We also realize that this dispersion is not by the convective zone deep, in this way we observed which the scattering of A(Li) can not be explained by classical theories of mixing in the convective zone. In conclusion we have that are necessary extra-mixing process to explain this decrease of Lithium abundance in solar analogs and twins stars. We analyzed the subgiant stars because this are the subsequent evolutionary stage after the solar analogs and twins stars. For this analysis, we compute the rotational period for 30 subgiants stars observed by Co- RoT satellite. For this task we apply two different methods: Lomb-Scargle algorithm, and the Plavchan Periodogram. We apply the TGEC code we compute models with internal distribution of angular momentum to confront the predict results with the models, and the observational results. With this analyze, we showed which solid body rotation models are incompatible with the physical interpretation of observational results. As a result of our study we still concluded that the magnetic field, convective envelope mass deepening, and internal redistribution of angular momentum are essential to explain the evolution of low-mass stars, and its observational characteristics. Based on population synthesis simulation, we concluded that the solar neighborhood presents a considerable quantity of solar twins when compared with the discovered set nowadays. Altogether we foresee the existence around 400 solar analogs in the solar neighborhood (distance of 100 pc). We also study the angular momentum of solar analogs and twins, in this study we concluded that added angular momentum from a Jupiter type planet, putted in the Jupiter position, is not enough to explain the angular momentum predicted by Kraft law (Kraft 1970)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

It bet on the next generation of computers as architecture with multiple processors and/or multicore processors. In this sense there are challenges related to features interconnection, operating frequency, the area on chip, power dissipation, performance and programmability. The mechanism of interconnection and communication it was considered ideal for this type of architecture are the networks-on-chip, due its scalability, reusability and intrinsic parallelism. The networks-on-chip communication is accomplished by transmitting packets that carry data and instructions that represent requests and responses between the processing elements interconnected by the network. The transmission of packets is accomplished as in a pipeline between the routers in the network, from source to destination of the communication, even allowing simultaneous communications between pairs of different sources and destinations. From this fact, it is proposed to transform the entire infrastructure communication of network-on-chip, using the routing mechanisms, arbitration and storage, in a parallel processing system for high performance. In this proposal, the packages are formed by instructions and data that represent the applications, which are executed on routers as well as they are transmitted, using the pipeline and parallel communication transmissions. In contrast, traditional processors are not used, but only single cores that control the access to memory. An implementation of this idea is called IPNoSys (Integrated Processing NoC System), which has an own programming model and a routing algorithm that guarantees the execution of all instructions in the packets, preventing situations of deadlock, livelock and starvation. This architecture provides mechanisms for input and output, interruption and operating system support. As proof of concept was developed a programming environment and a simulator for this architecture in SystemC, which allows configuration of various parameters and to obtain several results to evaluate it

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The increase of capacity to integrate transistors permitted to develop completed systems, with several components, in single chip, they are called SoC (System-on-Chip). However, the interconnection subsystem cans influence the scalability of SoCs, like buses, or can be an ad hoc solution, like bus hierarchy. Thus, the ideal interconnection subsystem to SoCs is the Network-on-Chip (NoC). The NoCs permit to use simultaneous point-to-point channels between components and they can be reused in other projects. However, the NoCs can raise the complexity of project, the area in chip and the dissipated power. Thus, it is necessary or to modify the way how to use them or to change the development paradigm. Thus, a system based on NoC is proposed, where the applications are described through packages and performed in each router between source and destination, without traditional processors. To perform applications, independent of number of instructions and of the NoC dimensions, it was developed the spiral complement algorithm, which finds other destination until all instructions has been performed. Therefore, the objective is to study the viability of development that system, denominated IPNoSys system. In this study, it was developed a tool in SystemC, using accurate cycle, to simulate the system that performs applications, which was implemented in a package description language, also developed to this study. Through the simulation tool, several result were obtained that could be used to evaluate the system performance. The methodology used to describe the application corresponds to transform the high level application in data-flow graph that become one or more packages. This methodology was used in three applications: a counter, DCT-2D and float add. The counter was used to evaluate a deadlock solution and to perform parallel application. The DCT was used to compare to STORM platform. Finally, the float add aimed to evaluate the efficiency of the software routine to perform a unimplemented hardware instruction. The results from simulation confirm the viability of development of IPNoSys system. They showed that is possible to perform application described in packages, sequentially or parallelly, without interruptions caused by deadlock, and also showed that the execution time of IPNoSys is more efficient than the STORM platform

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The increasing complexity of integrated circuits has boosted the development of communications architectures like Networks-on-Chip (NoCs), as an architecture; alternative for interconnection of Systems-on-Chip (SoC). Networks-on-Chip complain for component reuse, parallelism and scalability, enhancing reusability in projects of dedicated applications. In the literature, lots of proposals have been made, suggesting different configurations for networks-on-chip architectures. Among all networks-on-chip considered, the architecture of IPNoSys is a non conventional one, since it allows the execution of operations, while the communication process is performed. This study aims to evaluate the execution of data-flow based applications on IPNoSys, focusing on their adaptation against the design constraints. Data-flow based applications are characterized by the flowing of continuous stream of data, on which operations are executed. We expect that these type of applications can be improved when running on IPNoSys, because they have a programming model similar to the execution model of this network. By observing the behavior of these applications when running on IPNoSys, were performed changes in the execution model of the network IPNoSys, allowing the implementation of an instruction level parallelism. For these purposes, analysis of the implementations of dataflow applications were performed and compared

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Multimedia systems must incorporate middleware concepts in order to abstract hardware and operational systems issues. Applications in those systems may be executed in different kinds of platforms, and their components need to communicate with each other. In this context, it is needed the definition of specific communication mechanisms for the transmission of information flow. This work presents a interconnection component model for distributed multimedia environments, and its implementation details. The model offers specific communication mechanisms for transmission of information flow between software components considering the Cosmos framework requirements in order to support component dynamic reconfiguration

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Multimedia systems must incorporate middleware concepts in order to abstract hardware and operational systems issues. Applications in those systems may be executed in different kinds of platforms, and their components need to communicate with each other. In this context, it is needed the definition of specific communication mechanisms for the transmission of information flow. This work presents a interconnection component model for distributed multimedia environments, and its implementation details. The model offers specific communication mechanisms for transmission of information flow between software components considering the Cosmos framework requirements in order to support component dynamic reconfiguration

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Atlantic Forest biome occupies much of the Atlantic coast of Brazil, in addition to portions of Paraguay and Argentina. Due mainly to its biodiversity which falls in the group of global hotspots, i.e., areas that have high priority for conservation. Although currently there are some available devices that assist in their protection in the course of the history of occupation and exploitation of the Brazilian territory, this biome has gone, and is still going through, an intense process of devastation, caused mainly by the pressure from economic activities, culminating in a significant reduction of its area and consequent fragmentation of the landscape, which brings with hosts a series of problems at various scales and aspects. As in most municipalities included in the reach area of the biome, the situation of forest fragmentation in Tibau do Sul / RN is quite critical, reflecting on a truly diverse landscape with broad typology of land uses. Among the alternatives aimed at the conservation of this biome include the creation of protected areas and the creation of ecological corridors, the latter being more efficient by connecting the remaining forests, increasing landscape connectivity, providing significant gains in relation to biodiversity. However, a major problem on implementation of Ecological Corridors projects is related to the selection of areas for this purpose, in this sense Geography can provide important contributions through the integrated study of landscape in the light of the geosystemic approach and the use of Geographical Information System (GIS) in order to permit assessment of reality having as a base the integration of ecological, biological and man-made aspects. Thus, this research aims to indicate potential areas and propose scenarios delimitation of Ecological Corridors in the municipality of Tibau do Sul / RN through Geographic Inference techniques in GIS platform. Therefore, the methodology adopted is based on the Geosystemic approach. From these elements were created 4 models to indicate potential areas for implementation of Ecological Corridors from the environmental perspective (potential erosion), socioeconomic (cover and land prices), legislative (areas protected by environmental legislation) and integrated (combination of environmental factors, socioeconomic and legislative), which in turn served as a basis for proposing scenarios aimed at this purpose. The results showed that all models can be quite useful in indicating potential areas for the establishment of ecological corridors, especially when based on an integrated approach between environmental and anthropogenic. The Corridors delimitation proposes shown may perform duties beyond the establishment of connectivity between fragments, since they also may have usefulness in controlling erosion and protecting fragile environments. Among the models developed, the integrated constituted itself as the best option because it enabled the interconnection of a larger number of fragments from a better use of the potentialities present in the landscape

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nowadays the search for growth makes organizations seeking competitive advantages, project management shares this goal, through techniques that assist in the search for an improved management of the various fields of knowledge through a design methodology. The world is driven by projects and the search for ways to better manage activities such as time, cost and term towards the success of a particular project is something constant. A major contribution that IT can make to the health sector is the support for the management area. IT can integrate processes, optimize the interconnection between the various sectors, make hospitals have access to inside information of good quality, as well as support in the healthcare area, sharing pictures, uniting the various aspects of nursing and nursing service. The major challenge faced by the SESAP Information Technology sector at present is in project management in IT , which does not exist makes investments in the area are increasingly difficult due to this deficiency in management develop their own systems without cost additional to the State. This study seeks to build and strengthen the Project Management within the Department of Health through the implementation of a project office that will manage the final result of this work methodology based on PMBOK, and still show the functionality applied to development the state Hospital Management System that will later be installed on all Regional Health Units and proposing measures for the sustainability and development of the sector amid the difficulties of the current public service. Such action will result in a savings of more than R$ 107,000.00 (one hundred seven thousand) regarding spending private software currently used by the assignment of invested by the State of Rio Grande do Norte user licenses, representing more than 5 % of the total budget of the State Department of Public Health of the State

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The continuous evolution of integrated circuit technology has allowed integrating thousands of transistors on a single chip. This is due to the miniaturization process, which reduces the diameter of wires and transistors. One drawback of this process is that the circuit becomes more fragile and susceptible to break, making the circuit more susceptible to permanent faults during the manufacturing process as well as during their lifetime. Coarse Grained Reconfigurable Architectures (CGRAs) have been used as an alternative to traditional architectures in an attempt to tolerate such faults due to its intrinsic hardware redundancy and high performance. This work proposes a fault tolerance mechanism in a CGRA in order to increase the architecture fault tolerance even considering a high fault rate. The proposed mechanism was added to the scheduler, which is the mechanism responsible for mapping instructions onto the architecture. The instruction mapping occurs at runtime, translating binary code without the need for recompilation. Furthermore, to allow faster implementation, instruction mapping is performed using a greedy module scheduling algorithm, which consists of a software pipeline technique for loop acceleration. The results show that, even with the proposed mechanism, the time for mapping instructions is still in order of microseconds. This result allows that instruction mapping process remains at runtime. In addition, a study was also carried out mapping scheduler rate. The results demonstrate that even at fault rates over 50% in functional units and interconnection components, the scheduler was able to map instructions onto the architecture in most of the tested applications.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Generation systems, using renewable sources, are becoming increasingly popular due to the need for increased use of electricity. Currently, renewables sources have a role to cooperate with conventional generation, due to the system limitation in delivering the required power, the need for reduction of unwanted effects from sources that use fossil fuels (pollution) and the difficulty of building new transmission and/or distribution lines. This cooperation takes place through distributed generation. Therefore, this work proposes a control strategy for the interconnection of a PV (Photovoltaic) system generation distributed with a three-phase power grid through a connection filter the type LCL. The compensation of power quality at point of common coupling (PCC) is performed ensuring that the mains supply or consume only active power and that his currents have low distorcion. Unlike traditional techniques which require schemes for harmonic detection, the technique performs the harmonic compensation without the use of this schemes, controlling the output currents of the system in an indirect way. So that there is effective control of the DC (Direct Current) bus voltage is used the robust controller mode dual DSMPI (Dual-Sliding Mode-Proportional Integral), that behaves as a sliding mode controller SM-PI (Sliding Mode-Proportional Integral) during the transition and like a conventional PI (Proportional Integral) in the steady-state. For control of current is used to repetitive control strategy, which are used double sequence controllers (DSC) tuned to the fundamental component, the fifth and seventh harmonic. The output phase current are aligned with the phase angle of the utility voltage vector obtained from the use of a SRF-PLL (Synchronous Reference Frame Phase-Locked-Loop). In order to obtain the maximum power from the PV array is used a MPPT (Maximum Power Point Tracking) algorithm without the need for adding sensors. Experimental results are presented to demonstrate the effectiveness of the proposed control system.