Estudo da adição do resíduo proveniente da extração de minério de ferro em argilas do Rio Grande do Norte

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Aspectos ambientais e sociais envolvidos na transmissão da L. chagasi no município de Parnamirim/RN

Visceral leishmaniasis hás adapted in the past 20 years to periurban and urban areas, and in Natal, Rio Grande do Norte, it became endemic. Thid study aimed to evaluate the environmental and social aspectsof Leishmania chagasi infection and its epidemiologic transmission chain in an urban, periurban and rural area of Parnamirim-RN. A study with three sections was conducted: Section 1: Sectional study of the human and canine infection by L. chagasi and its environmental and social determinants. Section 2: Observational longitudinal cohort to evaluate the dynamics of the canine infection. Section 3: Longitudinal study to evaluate the behavior of Lu. Longipalpis vector and the seasonal factors related to its dynamics. To include in the study the hauses were randomly selected and georreferenciated. Montenegro skin test was done in the human population and blood samples were collected for anti-Leishmania antibody detection. The canine population was examinated for L. chagasi infection by RIFI, ELISA and ELISA for rK39. An entomologic surveillance was monthly done with CDC light trapsin 10 houses of each locality. Quantitative and qualitative analyses was done using STATISC 6.0. Probality and prediction maps were done using ArcGis 9.0 model. In the human population L. chagasi infection was associated with the area of the hause, age, sex, population densyti, vegetation, kind of the floor of thr hause, water and resides destiny. In the canine population L. chagasi infection was associated with the breed, size, time of living in the hause, presence of dogs in the neighborhood, presence of horses and donkeys in the neighborhood, vegetation, kind of the floor and walls of the hause. The human infection was associated with canine infction only when analyzed taking into account the locality. In the prospective study, serum conversion and antibody lost observed in 30,8% and 22% of the animals examined, respectively. The human infection rate by L. chagasi was 24,6%, by the presence of anti-Leishmania antibody and 38,6% by the Montenegro skin test. The canine infection rate 32,5% by the presence of anti-Leishmania antibody. The vector Lu longipalpis showed an atypical behavior. These results indicate that environmental and social factors are important variables associated with L. chagasi infection in humans and canines, with punctual association of thr last two. Control measures of the infection on the studied points are necessary, in the aim to reduce the endemic focus of the disease in the study area. This research was carried out in a multidisciplinary involving the categories of: doctor, biologist, veterinarian, statistical, pharmaceutical and biochemical

Análise tecnológica sobre os aspectos ambientais de empreendimentos hoteleiros da Praia de Ponta Negra Natal/RN: um modelo de sistema de gestão ambiental

The present work aimed the elaboration of an environmental study focused on the hotel sector in order to present an analysis of the environmental aspects of Ponta Negra Beach, in Natal, RN, Brazil and also the aspects of the small and medium hotels existing in this area. By means of this work, it is possible to elaborate a model of a simplified System of Environmental Management which can attend to the exigencies required by NBR ISO 14001: 2004, as well as to present economical viability and possibility to be implemented in a way that hotels may converge to the sustainable environmental development of the tourism in Ponta Negra Beach. The research methodology presents itself divided into three items: execution of the environmental characterization of Ponta Negra Beach, by way of technical visits and interpretation of satellite images and cartograms of the main environmental characteristics of the region; execution of the work already made concerning the development, application and interpretation of the evaluation of the environmental aspects of each hotel, considering the hotels and the period of data collection, these used in evaluation, research instrument and a description of the procedure utilized for the analysis of the collected data and the utilized methodology for the elaboration of a model of a simplified System of Environmental Management. In a general way, it has been concluded that the practices executed by hotels in Ponta Negra Beach are impact-like and harmful to the environment. The simple implementation of analysis procedures and control of the environmental aspects could suggestively contribute to the reduction of environmental impacts promoted by the hotel section at this beach and in the nearby areas. It had been noticed that the study contributed to the sensitization of managers concerning the environmental problems since, in many other times, the detected problem was, in fact, the non-acquaintance about the environmental aspects and impacts from those hotels administrators, because of the lack of surveys and studies about the theme. It had also been noticed the arousing of a possible environmental attitude from some managers

Estratégias de avaliação de desempenho dos propagandistas de medicamentos utilizados pela indústria farmacêutica no nordeste do Brasil

A Indústria Farmacêutica é uma das mais competitivas indústrias do mundo contemporâneo, e um dos seus principais desafios está na comercialização de seus medicamentos, que na sua maioria depende da prescrição médica. O objetivo deste estudo é identificar as estratégias de avaliação de desempenho utilizadas pela Indústria Farmacêutica de origem multinacional que atua no nordeste Brasileiro e o papel dos seus gerentes, para avaliar os propagandistas vendedores de medicamentos. Para tanto, buscouse reunir elementos para uma abordagem satisfatória que contemple a complexidade da temática pesquisada: Avaliação de Desempenho, Estratégias da Indústria Farmacêutica, Propaganda Médica e Competências dos Propagandistas de Medicamentos. A temática justifica-se em razão da importância estratégica dos propagandistas de medicamentos para a indústria farmacêutica, que é uma das indústrias que mais investe em pesquisa na atualidade, e contribui para melhorar a qualidade de vida e a saúde humana. A metodologia é caracterizada como um survey, de natureza quali-quantitativa. O objeto de estudo é composto pelas empresas farmacêuticas multinacionais de origem Americanas, Europeias e Asiáticas, associadas à INTERFARMA que atuam no Nordeste do Brasil. A coleta de dados foi realizada através de um questionário fechado (instrumento de pesquisa), composto por 5 perguntas fechadas que abordam a temática central dessa dissertação, 27 afirmativas para medir a concordância(escala likert) e 1 tabela contendo 46 competências, aplicado junto a gerentes da indústria farmacêutica. A análise dos dados foi feita por meio das técnicas de estatística descritiva e uma análise quantitativa para estabelecer o Ranking Médio (RM) para a parte do questionário que utilizou escala tipo Likert de 5 pontos para mensurar o grau de concordância dos respondestes. Através dos resultados desta pesquisa foi possível identificar as estratégias de avaliação de desempenho, utilizadas pelas empresas farmacêuticas, que atuam no Nordeste do Brasil, na gestão dos propagandistas vendedores de medicamentos, e identificar as competências essenciais dos propagandistas de medicamentos, na percepção dos gestores. Os resultados demonstraram que a Indústria Farmacêutica desenvolve e utiliza várias estratégias para medir e avaliar o desempenho dos propagandistas de medicamentos no Brasil, assim como em outros países, e que na percepção dos gerentes da Indústria Farmacêutica existem competências consideradas essenciais ao bom desempenho profissional dos propagandistas de medicamentos da indústria farmacêutica, contribuindo de para avanço do conhecimento deste tema

Estudo da adição do resíduo proveniente da extração de minério de ferro em argilas do Rio Grande do Norte

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Do encantamento dos números à realidade dos fatos: conciliação entre os balanços patrimonial e social da ALUNORTE

The social balance is turning into an instrument capable of identifying the Organizational Commitment socio-environmental. The objective of the Social Balance is to present the application of company resources on socio-environmental investments internally and externally. The research was developed based on the Balance Social and Sheet from Alumina North Brazil S / A, ALUNORTE, for fiscal years 2008 and 2009, with the purpose of describing the finding of the Balance Social and Sheet from ALUNORTE about social responsibility. To validate the proposal were doing comparisons between accounting and financial datas from Alunorte and Y.Yamada, in order to highlight what they say and indicators confirm the privileges of the first against second

Do encantamento dos números à realidade dos fatos: conciliação entre os balanços patrimonial e social da ALUNORTE

The social balance is turning into an instrument capable of identifying the Organizational Commitment socio-environmental. The objective of the Social Balance is to present the application of company resources on socio-environmental investments internally and externally. The research was developed based on the Balance Social and Sheet from Alumina North Brazil S / A, ALUNORTE, for fiscal years 2008 and 2009, with the purpose of describing the finding of the Balance Social and Sheet from ALUNORTE about social responsibility. To validate the proposal were doing comparisons between accounting and financial datas from Alunorte and Y.Yamada, in order to highlight what they say and indicators confirm the privileges of the first against second

Sistema de gestão ambiental na produção de água mineral

It s more and more evident the subject of the shortage of water, worsened by the accelerated urbanization, growth of the population, increase of the demand and of the costs of its treatment, factors that are also tied up to the increase of the consumption of mineral waters, whose chemical composition or physical-chemistries characteristics do with that are considered beneficial to the health. The growth accelerated all over the world in its consumption aims the concern with the waters quality, the health and the incentive to the consumption of natural products. However, in spite of quite valuable, that resource is explored, most of the time, without optimization of production or actions that avoid wastefulness. This research is justified for the need of minimizing the negative environmental impacts caused by the mineral water s production, mainly in what it say about the generation of effluents and wastes in the productive process, through the study, development and application of cleaner production tools for the environmental management, pertinent for that section. The applicability of Environmental Management System was determined by means of the characterization of the environmental aspects of productive process in a company of the section, in the state of Rio Grande do Norte and of the discussion of the panoramas that demonstrate the tendency for a sustainable development. Actions as a reforestation, optimization of energy and water uses, recycle of solid residues and water reuse were applied during the research, resulting in the considerable reduction of wastes of raw materials and inputs and consequent environmental and economic won. A specific methodology was proposed with concepts of Environmental Management, integrating with Quality Management. As foundations for the elaboration of the methodology, it was realized a similarity analysis among the systems and, mainly, an analysis of the experiences observed in the case study, including specificities, needs and difficulties of the company. With these results, the implantation of a EMS as a company strategy has environmental, economic and social benefits, and this research can be applied and adequate to others companies and sectors

Gestão dos resíduos sólidos no Brasil e seus rebatimentos em Natal, Brasil

O artigo apresenta a gestão dos resíduos sólidos no Brasil e seus rebatimentos na cidade de Natal/RN, verificando seus aspectos ambientais, econômicos e sociais. O fracasso da coleta seletiva revelado nos baixos índices de recuperação dos materiais; a baixa relevância da inclusão socioeconômica dos catadores que participam do programa assistencialista oficial; a inexistência de estratégias oficiais para que se minimize a quantidade de resíduos que se gera cada dia e o aumento exagerado dos gastos públicos, sobretudo com o tratamento dos resíduos no aterro sanitário, demonstram que a gestão de resíduos em Natal, conforme parâmentros da Política Nacional de Residuos Sólidos, objetiva o controle destes na cidade e a consolida- ção do tratamento finalista através do envio da quase totalidade dos resíduos coletados ao aterro sanitário

Desindustrialização no Brasil: teorias e evidências para o debate

This study aims to contribute with evidence to reinforce or not the thesis of a possible deindustrialization of the Brazilian economy, with emphasis on period after 1995. The debate began in the late 80s, however, recently the industry deceleration gained strength in discussions academic. Between the main theses in this debate is the new-development that believes in precocious deindustrialization caused primarily by overvaluation exchange rate. However, part of heterodoxy believes the industry downturn is more related to the rate of investment than the exchange rate. Nevertheless, according to the orthodox thesis the loss of competitiveness due to the high cost of production may have caused the de-industrialization in Brazil. On the other hand, part of Orthodoxy does not believe that the country is deindustrializing it, but is occurring convergence of Brazilian industry the world average. Thus, in an attempt to shed light on this debate, this study intends to identify the reasons for the deceleration of the Brazilian industry, emphasizing aspects underexplored in the literature and define whether or not the country suffers a process of deindustrialization. When analyzing various indicators, especially the quantum level we find strong indications that the deceleration of the Brazilian industry can be characterized as a deindustrialization, though still insufficient to qualify as precocious, given the loss of share in physical production in total output and the share of primary goods in the export basket

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Caracterização do óleo de carnaúba para uso como biolubrificante

Lubricant is responsible for reducing the wear on the friction protect the metal against oxidation, corrosion and dissipates excess heat, making it essential for the balance of a mechanical system, consequently prolonging the useful life of such a system. The origin of lubricating oils is usually mineral being extracted from the petroleum. But the search for a new source of production of lubricants and fuels it is necessary to meet future demands and reduce the possible environmental damage. For this reason, looking alternative means to produce certain products derived from petroleum, such as biodiesel, for example. Returning to the realm of lubricants, also one realizes this need for new raw materials for their production. Vegetable oil is a renewable resource and biodegradable, and its use entails advantages in environmental, social and economic. The development of this project aims to characterize the carnauba oil as a lubricant plant, or biolubricant. To analyze the oil carnauba tests as checking density, flash point, fire point, viscosity, viscosity, acid number, pH, copper corrosion, thermal conductivity and thermal resistivity were developed. In addition, for conducting the wear on the friction and the gradient of the system temperature, the analysis equipment is designed for wear on the friction. Based on these results, it is observed that the oil carnauba show good correlation to its application as biolubricant

Simulação do sistema de esgotamento sanitário de Ponta Negra- Natal: mitigação dos riscos ambientais e estratégia de manutenção preditiva

The simulation of SES-Natal Ponta Negra: mitigation of environmental risks and predictive maintenance strategy was developed in the context of several operational irregularities in the pumping stations and sewage systems in the system Ponta Negra. Thus, the environmental risks and complaints against the company due to overflows of sewage into the public thoroughfare became common. This neighborhood has shown in recent years an increase of resident higher than the initial expectation of growth. In this sense presumed the large population growth and generation of sewers higher than expected, associated to the use of corrective maintenance and misuse of the system may be the main causes of operational failures occurring in the SES. This study aimed at analyzing the hydraulic behavior of SES Ponta Negrathrough numerical simulation of its operation associated to future scenarios of occupation. The SES Ponta Negra has a long lengthof collection networks and 6 pumping stations interconnected, being EE 1, 2, 4 coastal way, and beach Shopping interconnected EE3 to receives all sewers pumped from the rest pumping station and pumped to the sewage treatment station of neighborhood which consists of a facultative pond followed by three maturation ponds with disposal of treated effluent into infiltration ditches. Oncethey are connected with each other, the study was conducted considering the days and times of higher inflow for all lifts. Furthermore, with the aim of measuring the gatherer network failures were conducted data survey of on the networks. Thephysical and operational survey data was conducted between January/2011 and janeiro/2012. The simulation of the SES was developed with the aim ofdemonstrating its functioning, eithercurrently and in the coming years, based in population estimates and sewage flow. The collected data represents the current framework of the pumping stations of the SES Ponta Negra and served as input to the model developed in MS Excel ® spreadsheet which allowed simulating the behavior of SES in future scenarios. The results of this study show thatBeach Shopping Pumping Station is actually undersized and presents serious functioning problemsthatmay compromise the environmental quality of surrounding area. The other pumping stations of the system will reach itsmaximum capacity between 2013 and 2015, although the EE1 and EE3 demonstrateoperation capacity, even precariously, until 2017. Moreover, it was observed that the misuse of the network system, due to the input of both garbage and stormwater, are major factors of failures that occur in the SES. Finally, it was found that the corrective maintenance appliance, rather than predictive,has proven to beinefficient because of the serious failuresin the system, causing damage to the environment and health risks to users

Magnitude da morbidade relacionada ao trabalho no Rio Grande do Norte

Diseases and disorders related to work sets up an important public health problem in Brazil and worldwide. However, the reality of these diseases still constitutes a gap with regard to its characterization and epidemiological situation, especially in Brazil. In this context, this study aims to analyze the magnitude of morbidity related to work from the injuries and illnesses reported by Health the Diseases Notifiable of Health of the State Public River Health Department worker Reference Center Information System services Grande do Norte from 2007 to 2014. It is ecological study, quantitative cross-sectional study in which the analysis unit of the municipalities of Rio Grande do Norte. Data were collected from the state base of Diseases Notifiable Information System Centre of the Secretariat of State Workers' Health Reference Public Health of Rio Grande do Norte, between March and June 2015, after the approval of the Committee of Ethics in Research of the Federal University of Rio Grande do Norte, Opinion 014/2014. The population was represented by the universe of cases of diseases and disorders related to work that were reported and shut down the system from 2007 to 2014. Data were analyzed using descriptive and inferential statistics, presented in tables, graphs, charts and figures. For this, we used the Microsoft Excel 2007 and SPSS version 20.0. To check the significance level we opted for the application of the chi-square or Fisher tests. We adopted the significance level of p <0.05. Of the 10,161 cases of diseases related to the reported work, the biological work accidents had the highest percentage (52.84%) followed by serious occupational accidents (37.49%). For diseases, the highlights were musculoskeletal (4.82%), mental disorders (2.19%) and exogenous intoxication (1.97%). Among men, there was a predominance of major accidents (91.80%), mental disorders (70.00%) and exogenous poisoning (52.84%). Women were most affected by biological accidents (77.50%) and musculoskeletal diseases (64.10%). Among workers who have suffered injuries predominated mulatto (%), mean age of 35.86 years, low education (%) and workers in the formal sector (%). Among the accidents, biological (n = 5,369) accounted for 52.84% of cases occurred predominantly among nursing professionals (48.31%). The percutaneous exposure was the most frequent (73.05%) and the occurrence of circumstances was improper disposal of sharps (45.28%), the needle the most common agent (66.62%) and the organic material was blood (72.99%). Most injured workers were vaccinated against hepatitis B (68.13%), but no information as to the assessment of the vaccine response. In the course of the disease predominated ignored the situation with loss of monitoring of clinical follow-up (55.62%). There was also an increase in the notification of serious industrial accidents predominantly male (91.80%) workers aged 25-44 years (54.3%) and typical accidents (76.3%). The temporary disability was the most common outcome (55.53%) and hand the most affected part (33.00%); the mining and construction industry had the highest number of cases (25.1%) in registered employee (34.2%). The findings of this study show a positive result in relation to increased mandatory reporting of injuries and illnesses related to work together to health services that meet victimized workers, towards the occurrence of knowledge of these accidents for decision making in public plans and policies of health. However, the information system still needs improvement in both the coverage and the quality of the data to demonstrate with greater reliability the magnitude of events to support the planning of workers' health into shares in the state.

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.