Investigação da memória autobiográfica em idosos com demência de Alzheimer nas fases leve e moderada

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Remoção de frações de óleo leve e pesado de rocha calcária através de sistemas microemulsionados

In this research the removal of light and heavy oil from disintegrated limestone was investigated with use of microemulsions. These chemical systems were composed by surfactant, cosurfactant, oil phase and aqueous phase. In the studied systems, three points in the water -rich microemulsion region of the phase diagrams were used in oil removal experiments. These microemulsion systems were characterized to evaluate the influence of particle size, surface tension, density and viscosity in micellar stability and to understand how the physical properties can influence the oil recovery process. The limestone rock sample was characterized by thermogravimetry, BET area, scanning electron microscopy and X-ray fluorescence. After preparation, the rock was placed in contact with light and heavy oil solutions to allow oil adsorption. The removal tests were performed to evaluate the influence of contact time (1 minute, 30 minutes, 60 minutes and 120 minutes), the concentration of active matter (20, 30 and 40 %), different cosurfactants and different oil phases. For the heavy oil, the best result was on SME 1, with 20 % of active matter, 1 minute of contact time, with efficiency of 93,33 %. For the light oil, also the SME 1, with 20 % of active matter, 120 minutes of contact time, with 62,38 % of efficiency. From the obtained results, it was possible to conclude that microemulsions can be considered as efficient chemical systems for oil removal from limestone formations

Achados da fundoscopia e alterações do pé diabético em pacientes do Hospital Universitário Onofre Lopes/UFRN

Trabalho com o objetivo de identificar as alterações do pé diabético causadas pelas lesões microangiopáticas e das lesões do fundo de olho secundárias aretinopatia diabética. Métodos:76 pacientes com Diabetes Melito tipos 1 e 2atendidos no ambulatório de Oftalmologia e Cirurgia Vascular do HUOL/UFRN, Natal, RN, no período de novembro de 2004 a janeiro de 2005, com queixas relativas a alterações da retinopatia diabéticae/oudo pé diabético. Em todos os pacientes foi realizado exame clínico geral, vascular e oftalmológico. Na avaliação específicado pé diabético deu-se ênfase paraa investigação do status vascular pela Classificação de Fontaine para Doença Arterial Obstrutiva Periférica, biomecânica,e teste do monofilamento de Semmes-Weinstein. O exame oftalmológico constou de refração e fundoscopiaatravés da qual identificou-se as formas clínicas da retinopatia diabética. Os dados foram submetidos à análise estatística das variáveis primárias que consistiu em caracterizar o grupo quanto a idade, tempo de doença, nível de glicose A segunda estratégia da análise dos dados constituiu na realização de testes de associação entrealgumas variáveis secundárias selecionadas. O software utilizado para os testes estatísticos foi o Statistica Versão 5, 1997.Resultado: Dos 76 pacientes diabéticos 97% tinham idade superior a 40 anos. O tempo de doença65% tinham mais de 10 anos. Com relação à glicose 72,72% apresentaram níveis de glicose em jejum acima de 100mg/dl. 55,26% apresentavam algum grau de retinopatia diabética contra 44,74% que não apresentavamesses sinais. Com as alterações do pé diabético, identificou-se 59,93% com lesões com área de predominância isquêmica, enquanto 41,07% tinham ausência de sinais. 58,82% apresentaram área de predominância neuropática, e 41,18% sem sinais de neuropatia. Dos com retinopatia diabética 78,57% tinham comprometimento isquêmico no pé e 47,62% tinham algum grau de neuropatia diabética. Observou-se que a retinopatia diabética não proliferativa, nos seus diversos graus de comprometimento apresentou-se com percentuais em torno de 80% junto às lesões do pé diabético, seja isquêmico ou neuropático. Dos pacientes que tinham retinopatia 60,46% tinham alterações biomecânicas dos pés. Conclusão: Concluiu-se que a RDNP leve foi mais freqüente nas lesões do pé diabético isquêmico, enquanto a RDNP severa mostrou-se mais presente no pé diabético neuropático

Crianças com infecções respiratórias agudas: como são cuidadas em casa?

Objetivou-se, neste estudo exploratório/descritivo, identificar conhecimentos e necessidades dos cuidadores da criança com Infecção Respiratória Aguda (IRA) através de uma amostra de 129 crianças atendidas no serviço de crescimento e desenvolvimento de uma unidade de saúde. Foram aplicados formulários junto aos cuidadores, em seu domicílio, nos meses de fevereiro e março de 2002. Os cuidadores eram do sexo feminino, a maioria jovem, com ensino fundamental incompleto e com renda de 1 a 2 salários. Em relação aos primeiros cuidados com a criança doente, 48,2% dos cuidadores procuram o médico, 36,6% medicam por conta própria e 13,2% utilizam fitoterápicos. Como medidas de prevenção contra pneumonia em crianças com IRA leve, os cuidadores utilizam medidas de senso comum e sabem reconhecer sinais de gravidade das doenças, por experiências anteriores, revelando uma lacuna do conhecimento dos principais sinais e sintomas de doenças graves do trato respiratório

Perfil das condições de seguimento terapêutico em portadores de hipertensão arterial

A proposta foi investigar os aspectos comportamentais referentes ao seguimento da terapêutica farmacológica e não farmacológica e o grau de adesão ao tratamento anti-hipertensivo de um grupo específico. Estudo observacional descritivo com análise quantitativa, realizado no Centro de Referência da Assistência Social em Fortaleza-CE, de agosto/2008 a maio/2009. Dados obtidos de 49 indivíduos por entrevista e exame físico. Mais de 50% dos participantes seguiam as terapêuticas não farmacológicas. Prevaleceram a terapia combinada (53%) e as classes medicamentosas de diuréticos (72%) e inibidores da enzima conversora de angiotensina (55%). Muitos participantes (49%) referiram reações adversas. Destas, as mais citadas foram poliúria e tontura (29%). Quanto ao grau de adesão, a média correspondeu ao conceito não adesão leve. A avaliação dos comportamentos de seguimento terapêutico e a caracterização clínico-epidemiológica são necessárias para o enfermeiro planejar estratégias educativas. Ambas possibilitam ajustes no planejamento das intervenções, contribuindo para a melhor adesão terapêutica dos indivíduos

Síndrome de Burnout : um estudo com guias de turismo regional em Natal-RN

Burnout is a psychological syndrome triggered in response to continuous exposure to interpersonal stressors. It is considered a multifactorial construct, which is commonly characterized by three dimensions: emotional exhaustion, dehumanization, and lack of personal accomplishment.This study aimed to verify if the three characteristics of burnout (exhaustion, lack of dehumanization and personal accomplishment) are present in people working as guides Tourism in Natal - RN. It is a descriptive and quantitative study. 109 subjects were surveyed. Data collection was done through the use of questionnaires, the instrument used was the characterization of the Burnout Scale (ECB) created and validated in Brazil by Trocoli and Tamayo (2000). In order to analyze data we used descriptive statistics, analysis of core measures, exploratory and confirmatory factor analysis, reliability analysis, cluster analysis, multiple discriminant and Spearman correlation. Factor analysis identified four factors that explain 58.3% of the total variance. Those factors were named exhaustion, deception, avoidance, and dehumanization. The reliability of the instrument, as measured by Cronbach's Alpha was 0.918, which is considered excellent reliability. The 109 subjects were grouped into three cluster, which had the deception, avoidance, and dehumanization as discriminant. It is possible to conclude that the characteristics of burnout syndrome are present in the studied population where 19 people are on the high level of burnout, moderate in 32 and 56 in the light. The correlations between socio-demographic variables studied and the dimensions of burnout, were few and weak. The variable leave for health reasons in the study appeared to be related to feelings of exhaustion and avoidance behavior appeared related to younger individuals and who work only in the activity of Receptive Tourism Guide. Verification of the incidence of burnout in individuals surveyed suggest the need to adopt intervention strategies are individual, organizational and / or combined

Diversidade Ictiofaunística e Ecologia reprodutiva de uma espécie nativa de peixe da Bacia Piranhas-Assu, RN

The Caatinga biome is rich in endemic fish species fauna. The present study the results of fish faunal surveys conducted in the hydrographic basin of Piranhas-Assu of the Brazilian Caatinga biome. The fish samples collected were distributed in four orders (Characiformes, Perciformes, Siluriformes and Synbranchiformes), 11 families (Characidae, Curimatidae, Auchenipteridae, Anostomidae, Prochilodontidae, Erythrinidae, Cichlidae, Sciaenidae, Heptapteridae, Loricariidae, Synbranchidae) and 22 species, of which 17 are endemic and five have been introduced from other basins. The order Characiformes was the most representative in number of species (46,35% ) followed by Perciformes (35,38%), Siluriformes (17,44%) and Synbranchiformes (0,5%). The Nile tilapia, Oreochomis niloticus, the only exotic species, was most expressive in number of individuals (24.92%) followed by the native species piau preto, Leporinus piau (18,77 %). Considering the relative frequency of occurrence of the 22 species, 13 were constant, five were accessory and four were occasional. This study investigated the reproductive ecology of an endemic fish black piau, Leporinus piau from the Marechal Dutra reservoir, Acari, Rio Grande do Norte. Samplings were done on a monthly basis from January to December 2009, and a total of 211 specimens were captured. The environmental parameters such as rainfall, temperature, pH, electrical conductivity and dissolved oxygen of water were recorded. The sampled population showed a slight predominance of males (55%), however females were larger and heavier. Both sexes of L. piau showed positive allometric growth, indicating a higher increase of weight than length. The first sexual maturation of males occurred at smaller size, with 16.5 cm in total length than females (20.5 cm). During the reproductive period, the condition factor and gonadosomatic index (GSI) of L. piau were negatively correlated. This species has large oocytes with a high mean fecundity of 54.966 with synchronous oocyte development and total spawning

Genes candidatos de suscetibilidade a pré-eclampsia: estudo de associação

Preeclampsia is a multifactorial disease of unknown etiology that features with wide clinical symptoms, ranging from mild preeclampsia to severe forms, as eclampsia and HELLP syndrome. As a complex disease, preeclampsia is also influenced by genetic and environmental factors. Aiming to identify preeclampsia susceptibility genes, we genotyped a total of 22 genetic markers (single nucleotides polymorphisms SNPs) distributed in six candidates genes (ACVR2A, FLT1, ERAP1, ERAP2, LNPEP e CRHBP). By a case-control approach, the genotypic frequencies were compared between normotensive (control group) and preeclamptic women. The case s group was classified according to the disease clinical form in: preeclampsia, eclampsia and HELLP syndrome. As results we found the following genetic association: 1) ACVR2A and preeclampsia; 2) FLT1 and severe preeclampsia; 3) ERAP1 and eclampsia; 4) FLT1 and HELLP syndrome. When stratifying preeclampsia group according to symptoms severity (mild and severe preeclampsia) or according to the time of onset (early and late preeclampsia), it was detected that early preeclampsia is strongly associated to risk preeclampsia, eclampsia and HELLP syndrome have different genetic bases, although FLT1 gene seems to be involved in preeclampsia and HELLP syndrome pathophisiology

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic

Avaliação da adição de Nanosílica e silicato de sódio em pastas de cimento para poços de petróleo com baixo gradiente de fratura

The oil wells cementing is a critical step during the phase of well drilling, because problems during the operation of slurry pumping and an incomplete filling of the annular space between the metal casing and the formation can cause the slurry loss. Therefore, the slurry adopted in primary cementing an oil well must be properly dosed so that these problems are avoided during its pumping. When you drill a well in a weak rock formation requires even more careful, because should be a limit of hydrostatic pressure exerted during cementation, that does not occur rock collapse. With the objective of performing the cementing of a well whose formation is weak or unconsolidated are employed lighter slurries. Thus, this study used slurries with sodium silicate and nano silica in concentrations of 0,1; 0,4; 0,7 e 1,0 gpc, in which the slurries with nano silica showed the rheological parameters higher concentrations of up to 0.7 gpc and for concentration of 1.0 the slurry with sodium silicate obtained the highest values, remaining above the limits for application in fields, mainly wells with low fracture gradient, because a significant increase in viscosity may result in an increase in pressure pumping in operations of secondary cementations. Furthermore, there was no decrease in strength with increasing concentration of additive. Then, it is possible use of these additives to formulate Lighter slurry

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2