67 resultados para Gomes, Daniel Auto-retratos
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work
Resumo:
In this work, we propose a two-stage algorithm for real-time fault detection and identification of industrial plants. Our proposal is based on the analysis of selected features using recursive density estimation and a new evolving classifier algorithm. More specifically, the proposed approach for the detection stage is based on the concept of density in the data space, which is not the same as probability density function, but is a very useful measure for abnormality/outliers detection. This density can be expressed by a Cauchy function and can be calculated recursively, which makes it memory and computational power efficient and, therefore, suitable for on-line applications. The identification/diagnosis stage is based on a self-developing (evolving) fuzzy rule-based classifier system proposed in this work, called AutoClass. An important property of AutoClass is that it can start learning from scratch". Not only do the fuzzy rules not need to be prespecified, but neither do the number of classes for AutoClass (the number may grow, with new class labels being added by the on-line learning process), in a fully unsupervised manner. In the event that an initial rule base exists, AutoClass can evolve/develop it further based on the newly arrived faulty state data. In order to validate our proposal, we present experimental results from a level control didactic process, where control and error signals are used as features for the fault detection and identification systems, but the approach is generic and the number of features can be significant due to the computationally lean methodology, since covariance or more complex calculations, as well as storage of old data, are not required. The obtained results are significantly better than the traditional approaches used for comparison
Resumo:
Micro cracking during service is a critical problem in polymer structures and polymer composite materials. Self-healing materials are able to repair micro cracks, thus their preventing propagation and catastrophic failure of structural components. One of the self-healing approaches presented in the literature involves the use of solvents which react with the polymer. The objective of this research is to investigate a procedure to encapsulate solvents in halloysite nanotubes to promote self-healing ability in epoxy. Healing is triggered by crack propagation through embedded nanotubes in the polymer, which then release the liquid sovent into the crack plane. Two solvents were considered in this work: dimethylsulfoxide (DMSO) and nitrobenzene. The nanotubes were coated using the layer-by-layer technique of oppositely charged polyelectrolytes: cetyltrimethylammonium bromide (CTAB) and sodium polyacrylate. Solvent encapsulation was verified by X-ray diffraction (XRD), Fourier transform infrared (FTIR), analysis thermogravimetry (TGA), adsorption and desorption of nitrogen and scanning electron microscopy (SEM). The introduction of the solvent DMSO into the cavity of the nanotubes was confirmed by the techniques employed. However, was not verified with nitrobenzene only promoted clay aggregation. The results suggest that the CTAB reacted with the halloystite to form a sealing layer on the surface of the nanotubes, thus encapsulating the solvent, while this was not verified using sodium polyacrylate.
Resumo:
Objective: To determine the prevalence of ocular findings of the external structures and anterior segment of the eye, detected by biomicroscopic examination in schoolchildren in Natal (RN) - Brazil. Methods: After previous random selection, 1,024 pupils from elementary and secondary public and private schools in the city of Natal were evaluated from March to June 2001. All were submitted to preestablished standard research norms, consisting of identification, demographic information, ophthalmologic biomicroscopic examination, with slit lamp, performed by ophthalmologists from the Onofre Lopes University Hospital. Results: Alterations of the conjunctival and palpebral conditions were the most prevalent (10.4% and 6.2% respectively). Follicles (4.2%) and papillae (3.0%) were the frequent conjunctival lesions, while blepharitis (3.5%) and meibomitis (1.1%) were the most detected abnormalities in the eyelids. Upon examining the cornea, iris, lens and anterior vitreous, the most encountered findings were nubecula (0.5%), papillary membrane reliquiae (0.5%), posterior capsula opacity (0.8%) and hyaloid arteria reliquiae (2.0%). Conclusion: The most prevalent findings affecting the external structures of the eye such as eyelids and conjunctiva, consisted of blepharitis followed by follicular reaction of the conjunctiva. The most prevalent abnormalities in the cornea, iris, lens and anterior vitreous were nubecula, papillary membrane reliquiae, posterior capsular opacity and hyaloid arteria reliquiae, in that order
Resumo:
The current study presents the characteristics of self-efficacy of students of Administration course, who work and do not work. The study was conducted through a field research, descriptive, addressed quantitatively using statistical procedures. Was studied a population composed of 394 students distributed in three Higher Education Institutions, in the metropolitan region of Belm, in the State of Par. The sampling was not probabilistic by accessibility, with a sample of 254 subjects. The instrument for data collection was a questionnaire composed of a set of questions divided into three sections: the first related to sociodemographic data, the second section was built to identify the work situation of the respondent and the third section was built with issues related to General Perceived Self-Efficacy Scale proposed by Schwarzer and Jerusalem (1999). Sociodemographic data were processed using methods of descriptive statistics. This procedure allowed characterizing the subjects of the sample. To identify the work situation, the analysis of frequency and percentage was used, which allowed to classify in percentage, the respondents who worked and those that did not work, and the data related to the scale of self-efficacy were processed quantitatively by the method of multivariate statistics using the software of program Statistical Package for Social Sciences for Windows - SPSS, version 17 from the process of Exploratory Factor Analysis. This procedure allowed characterizing the students who worked and the students who did not worked. The results were discussed based on Social Cognitive Theory from the construct of self-efficacy of Albert Bandura (1977). The study results showed a young sample, composed the majority of single women with work experience, and indicated that the characteristics of self-efficacy of students who work and students who do not work are different. The self-efficacy beliefs of students who do not work are based on psychological expectations, whereas the students who work demonstrated that their efficacy beliefs are sustained by previous experiences. A student who does not work proved to be reliant in their abilities to achieve a successful performance in their activities, believing it to be easy to achieve your goals and to face difficult situations at work, simply by invest a necessary effort and trust in their abilities. One who has experience working proved to be reliant in their abilities to conduct courses of action, although know that it is not easy to achieve your goals, and in unexpected situations showed its ability to solve difficult problems
Resumo:
The present work analyzes the fast evolution of gated communities in Natal-RNs urban space. Characterized by the occupation of large areas, providing private security and utilities, this kind of real estate use arises a long list of questions and issues from society and scholars, due to privatization of urban space, bending of law constraints and the lack of an integrated planning of the cities where they are built. The reasons for its fast growth in Brazil s urban areas are analyzed, considering the impact on formal urban planning and municipal services and on the identification of urbanistic, architectural pattern and constraints, as well as legal, social and economic issues. This study is based on the detailed analysis of the first three units of gated communities built in the urban space in Natal, between 1995 and 2003, including their evolution throughout time and the specific social and economic reasons for its present widespread adoption in Brazilian real estate market and, particulary, in our city. The main objective of this piece of work is to answer the why s and how s these phenomena evolved, setting a basis for the definition of adequate public policies and regulation of this kind of urban land use
Resumo:
The species Dasyatis marianae inhabits coastal areas associated with coral reefs, considered endemic to the northeast of Brazil, occurring from the State of Maranho to the south of Bahia. Specimens of this species are commonly sighted by divers and fishermen in the area of Maracaja reefs, a complex reef that is part of the Environmental Protection Area of Coral Reefs (EPACR), which was developed in this study about the ecology and biology of the D. marianae, in order to characterize aspects of population structure in the area of the reef complex of Parracho de Maracaja. We analyzed 120 specimens caught by artisanal fishing site of the size, weight, sex, stage of maturity and stomach contents. Most subjects were adult males (1.7:1) and was more abundant for rays with lengths between 25 and 29cm of LD, where females reach larger sizes, a feature common to other rays. The largest specimens were captured in the area of seagrass, which is preferred for the species. The distribution of species in the area showed an ontogenetic and sexual segregation, where the youthful occur near the beach, which is a likely area for nursery and growth of the adult females prevail in the seagrass, which apparently has a high prey availability, and Adult males are more distant, a higher proportion occurring in outlying areas, suggesting a habit more exploratory than the females. The evaluation of the reproductive system indicated 3 reproductive cycles per year, one young per pregnancy, and showed that the mature males were smaller than females. The cubs of D. marianae size at birth 12 to 15cm LD. As for diet, the species was characterized as carnivorous crustacean specialist. The performance of visual censuses in different localities allowed to evaluate the density of D. marianae in different environments of the complex. The species occurs in greater numbers in seagrass, environment very important for the conservation of the species. 100 individuals of D. marianae marked in reef complex area enrolled in a recapture rate of 3%. Some behavioral aspects were evaluated, as diurnal pattern of activity, interaction with cleaning and fish Pomacanthus paru followers as Lutjanus analis and Carangoides bartholomaei. Overall, much of the information obtained should be used for management of the species
Resumo:
Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor
Resumo:
In the Hydrocarbon exploration activities, the great enigma is the location of the deposits. Great efforts are undertaken in an attempt to better identify them, locate them and at the same time, enhance cost-effectiveness relationship of extraction of oil. Seismic methods are the most widely used because they are indirect, i.e., probing the subsurface layers without invading them. Seismogram is the representation of the Earth s interior and its structures through a conveniently disposed arrangement of the data obtained by seismic reflection. A major problem in this representation is the intensity and variety of present noise in the seismogram, as the surface bearing noise that contaminates the relevant signals, and may mask the desired information, brought by waves scattered in deeper regions of the geological layers. It was developed a tool to suppress these noises based on wavelet transform 1D and 2D. The Java language program makes the separation of seismic images considering the directions (horizontal, vertical, mixed or local) and bands of wavelengths that form these images, using the Daubechies Wavelets, Auto-resolution and Tensor Product of wavelet bases. Besides, it was developed the option in a single image, using the tensor product of two-dimensional wavelets or one-wavelet tensor product by identities. In the latter case, we have the wavelet decomposition in a two dimensional signal in a single direction. This decomposition has allowed to lengthen a certain direction the two-dimensional Wavelets, correcting the effects of scales by applying Auto-resolutions. In other words, it has been improved the treatment of a seismic image using 1D wavelet and 2D wavelet at different stages of Auto-resolution. It was also implemented improvements in the display of images associated with breakdowns in each Auto-resolution, facilitating the choices of images with the signals of interest for image reconstruction without noise. The program was tested with real data and the results were good
Resumo:
Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define the various parameters necessary for an efficient heat reservoir management, and with this, improve the recovery factor of the reservoir. The purpose of this work is to show the influence of the coupled wellbore/reservoir on the thermal simulation of reservoirs under cyclic steam stimulation. In this study, the methodology used in the solution of the problem involved the development of a wellbore model for the integration of steam flow model in injection wellbores, VapMec, and a blackoil reservoir model for the injection of cyclic steam in oil reservoirs. Thus, case studies were developed for shallow and deep reservoirs, whereas the usual configurations of injector well existing in the oil industry, i.e., conventional tubing without packer, conventional tubing with packer and insulated tubing with packer. A comparative study of the injection and production parameters was performed, always considering the same operational conditions, for the two simulation models, non-coupled and a coupled model. It was observed that the results are very similar for the specified well injection rate, whereas significant differences for the specified well pressure. Finally, on the basis of computational experiments, it was concluded that the influence of the coupled wellbore/reservoir in thermal simulations using cyclic steam injection as an enhanced oil recovery method is greater for the specified well pressure, while for the specified well injection rate, the steam flow model for the injector well and the reservoir may be simulated in a non- coupled way
Resumo:
A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity
Resumo:
Body image is the figure of our bodies built in our minds and the degree of dissatisfaction is often associated with risk factors identified by anthropometric measures. The purpose of this descriptive study was to evaluate the risk factors associated to morphological and functional variables associate to the perception of auto-image in middle-aged walkers of the south zone of the city of Natal. A hundred and thirty volunteers had been evaluated in four groups in function of the gender and age group. As measurement evaluations were used an auto-image perception questionnaire proposed by Stunkart of nine silhouettes numbered for both gender was applied; a weighing machine equipped with stadiometer for the body mass (kg) and stature (m) and the body mass index (kg/m2) that was calculated with base in measures of the body weight and stature and classified according to norms of the National Institute of Health (2000) as well as the systolic and diastolic blood pressure by a electronic digital device (DIGITRONIC). A metal anthropometric tape was used for the waist to hip ratio (WHR). It was used Analyses of variance (ANOVA) one-way, post hoc of Tukey and correlation of Spearman for the nonparametric data adopting the level of ρ≤ 0,05 for rejection of the null hypothesis. The body mass index indicated high factors of risk in the consisting groups. In all the groups were registered the desire to reduce their silhouettes. The body weight shows reduced when compared with the younger group in the male group of superior age group, while in the female group the inverse one occurs. The autoimage perception is associated with the classification of the waist to hip ratio in the female gender in the age group of the 50 to the 59 years and in the classification of the body mass index of all constituted groups. Significant associations had not been found for classification of the systolic and diastolic blood pressure in relation to the auto-image 41 perception. This thesis presents relation of interdisciplinarity and its contents have application in the fields of Physical Education, Medicine, Physiotherapy and Nursing
Resumo:
The present work shows trajectories of life of seated women agricultural, with the objective to apprehend on aspects to the experience of its sexuality. The daily one of the seated woman is constructed in a new space, called agricultural nesting whose formation if presents with proper singularity to a social and economic context and politician of the Great River of the North. Its passages of life are permeaty by different violences suffered in its daily one and its sexuality is weaveeed by a set of rules that the naturalization of the subordination of the woman in relation to the man keeps. The societies use the systems of the relations between men and women and transform the biological characteristic into activities human beings
Resumo:
This work has for objective to analyze the perception of benefited of Pronaf B Programa Nacional de Fortalecimento da Agricultura Familiar, in relation to the results that are presented concerning this program. For this, it is presented hypothesis of that the familiar agriculturists, fit in the norms of credit of Pronaf B, have a peculiar perception on the end item of this program, produced from inherent characteristics to the agricultural reality where they live. Ahead of this, I broke myself of estimated of that the searched familiar agriculturists are more socially vulnerable to the inaqualities the agricultural areas. For this research, they had been used, mainly, theoretical reflections of studious of the campesinato, familiar agriculture and of researchers of the impacts of Pronaf B in the agricultural way. The empirical data of the research had been gotten, through the application of questionnaires with the benefited ones and interviews with the mediators of this program in the two searched cities, Apodi and Antnio Martins, in the Rio Grande do Norte, who proportionally withholds the biggest contract number of Pronaf B in the state. The conclusion of the research ratifies the initial hypothesis of that the perception on the results of Pronaf B for benefited its is peculiar, and points stops beyond the economic results, such as: the rise of auto-esteem; the rescue of the citizenship feeling and as impact in autoconsumo of the families of the agriculturists benefited for Pronaf B
Resumo:
The soil macrofauna is influenced to several biotic and abiotic environmental factors, from changes in the physical environment to a variety of interactions among the species involved, affecting the patterns of biodiversity of soil fauna. The power and specificity of the mechanisms that act on soil organisms vary greatly depending on environmental conditions at different scales of space and time. The Caatinga has great spatial heterogeneity of vegetation, climate and soil, so the soil macrofauna would follow this local spatial variation in the environment? This study aimed to investigate the effects of local environmental variables on biological parameters (taxa richness, total abundance and biomass) of soil macrofauna in a fragment of caatinga in Joo Cmara, Rio Grande Norte, Northeast Brazil. The study was conducted in the Cauau farm, where a grid of 2000m x 500m was drawn, and later, 30 sampling points were randomly selected. The methodology used to collect the macrofauna was the TSBF method. We tested the effects of 10 environmental variables on macrofauna across the plots and across the layers of soil. The hypothesis that macrofauna soil responds to changes in the environment was not supported throughout the plots, but was confirmed to soil layers. The soil macrofauna shows a pattern of concentration in the surface layer and decreases considerably in the deeper layers. This pattern had significant and positive relationship with the aerial plant biomass and fine root stock. The aerial plant biomass releases plant necromass that accumulates in the surface layer, providing an important source of resource and shelter for soil macrofauna, explaining their greater abundance in this layer. The roots are used as a means for the arrival of nutrients to the soil from the primary production, thus a greater amount of root conditions higher food intake for macrofauna, especially the herbivores