17 resultados para Fluxos de caixa operacionais

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present work concerns an auto-ethnographic study based on life experiences and reflections of an educator at Escola Viva Preschool and Elementary-Middle School, located in the city center of Natal, Rio Grande do Norte. As a cognitive model of operation, we use the metaphor of the Circle Dance. The objective of this study is to identify, interpret and describe the ludopoetics that are achieved through a Musical Education program, which we denominate, Humanescent. The data of this investigation was derived from the music making by Preschool and Elementary-Middle School students at Escola Viva during 2007, 2008 and 2009, from which 20 learners were selected to form the corpus, along with the description and interpretation of photos of their experiences and sand tray scenes. We justify the methodological systemization of the research based on our own pedagogical practice, which supports Musical Education in the schools based on the principals of Embodiment, Autopoesis and Flow. The methodological systemization was developed through an Action Research model and on the concepts of Systemic Development, with the goal of re-reading the context investigated through the structuring of categories of Ludopoesis: Self-esteem, Self-territory, Self-connectivity, Self-realization and Selfworth. We used an observant-participant research approach with regard to the perception of emergent knowledge, the surroundings, the experience lived and the contextual and vibration of the circumstances. Besides this, we used projection to interpret the experiences lived, in the form of drawings, short poems, letters or sand tray scenes as symbolic interpretations of experience. In the unfolding of the Ludopoetic Process (Selfesteem, Self-territory, Self-connectivity, Self-realization and Selfworth) we draw conclusions about the relevance of the ludic musical experience, which foments the formation of the self based on music learning, and which is demonstrated in the Embodiment of the learners. In the auto-formative process (of learners and educators) we observe the importance of pedagogical work based on Musical Humanescent Education that gives value to the music making path to the construction of music and performance in play, creativity, and sensibility. The experience of making music in a playful way allows for organization of the self and its autonomous production in the joy of living within a ludopoetic process. These findings highlight the educator as in a permanent state of selfformation, which generates moments of flow. However, in Musical Humanescent Education, music is learned collectively, doing a circle dance, experiencing love, fostering an expansion of the creative spirit, and giving recognition to playfulness as a necessary condition for education and to the value of music made with the true nature and sensibilities of the educators

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study examined the relations of power in the management of the Escola Estadual Presidente Kennedy, including the deliberate decisions on the School Council and School Fund, which guided the organization of the school. We sought to understand the management models that influenced the school organization, promoting contradictions in the decision making process. The school management is intensely marked by management models from the business logics as in the case of managerialism of bureaucracy. The formulation of educational policies based on managerialism has proposed a school-centered management with intense accountability of the school community in planning and monitoring the public services. The influences of these models subsidize hierarchical power relations that undermine the actions of decision-making of the collegiate bodies for the democratization of school management. To develop a research on the power, the investigation was based on studies of Bourdieu and Foucault. These authors understand the power in a relational system in a double sense, both in terms of discipline and the possibility of resistance. A theoreticalmethodological matrix was developed focusing on literature review, document analysis, structured interviews with twelve representatives of the segments belonging to the School Council and School Fund, as well as observations in meetings with the production of field notes. It was found that power relations experienced in the organization and activities of the school boards are marked by changes in public management over the years, promoting the contradictions between the concepts of corporate management originated in the business logics and the perspective of democratic management subsidized by official legislative documents at the national and state levels. The observations in meetings and analysis of the records showed that representatives related to management (president and manager of the school) have a privileged position with regard to exposure of their propositions, and are more likely to take a position in the political game of the collegiate bodies of work. It was also seen that the irregularity of meetings, particularly of the School Fund meetings, limits the experience of operation of the representatives in discussions concerning the planning and monitoring the actions of school management. Reports from representatives of the School Council showed that certain segments related to the management recognize their power of decision, however others have little interfere in the decision-making process in order to expound the desires of those who are represented by them. In the School Fund, the analysis of the records and interviews showed restricted moments of the meeting of representatives, and these only being aimed at choice or approval of the implementation plan prepared by the school management. The results showed no indications of moments of reflection to study the best chance for applicability of resources. This collegiate body (School Fund) has a questionable action when planning and monitoring the applicability of the financial resources of the School. To sum up, it was found that the Escola Estadual Presidente Kennedy still lives hierarchical power relations that undermine the institutionalization of democratic management in the various representative segments may take place in the game of political decision-making processes necessary for the organization of the school

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The changes incurred in the financial system with the introduction of new technologies and new forms of administration of banks has caused impact on the health of workers. These changes, which passed in the process of work, generate a combined share of the risk factors that result in numerous injuries and illnesses among banks, notably between the operators of banks tellers. The Work-Related Musculoskeletal Disordes - WRMD represent a group of occupational diseases always present among these workers. Because of its high incidence and the amount of financial resour envolved to manage the problem has been the object of constant study. This paper aims to analyze the bank teller activity; search the occurrence of WRMD in the activity, identifying the factors determining the occurrence of WRMD in the activity and determine the real number of touchs on a keyboard made by the operator and propose solutions that influence the reduction of illness in the workplace of the bank teller. Methodological tools of ergonomics are used to provide a broad knowledge of aspects of work that have been studied and influential in the generation of occupational diseases studied. It was found that activity put workers to serious risk of occupational diseases. As the main contributory factors and determinants for this illness: the requirements and control the numbers daily endorsements; evaluation system based on performance targets for productivity; management system at time of service to customers; work with stressful factors (broken box); excess of time worked; furniture of workstations with ergonomic inadequacies and policy for the prevention of occupational diseases inefficient. They have also noted cases of illness for DORT workers without fulfilling the legal requirement of the issuance of the communication of labour accident and without the removal of the employee of the workplace

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the two last decades of the past century, following the consolidation of the Internet as the world-wide computer network, applications generating more robust data flows started to appear. The increasing use of videoconferencing stimulated the creation of a new form of point-to-multipoint transmission called IP Multicast. All companies working in the area of software and the hardware development for network videoconferencing have adjusted their products as well as developed new solutionsfor the use of multicast. However the configuration of such different solutions is not easy done, moreover when changes in the operational system are also requirede. Besides, the existing free tools have limited functions, and the current comercial solutions are heavily dependent on specific platforms. Along with the maturity of IP Multicast technology and with its inclusion in all the current operational systems, the object-oriented programming languages had developed classes able to handle multicast traflic. So, with the help of Java APIs for network, data bases and hipertext, it became possible to the develop an Integrated Environment able to handle multicast traffic, which is the major objective of this work. This document describes the implementation of the above mentioned environment, which provides many functions to use and manage multicast traffic, functions which existed only in a limited way and just in few tools, normally the comercial ones. This environment is useful to different kinds of users, so that it can be used by common users, who want to join multimedia Internet sessions, as well as more advenced users such engineers and network administrators who may need to monitor and handle multicast traffic

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A new method to perform TCP/IP fingerprinting is proposed. TCP/IP fingerprinting is the process of identify a remote machine through a TCP/IP based computer network. This method has many applications related to network security. Both intrusion and defence procedures may use this process to achieve their objectives. There are many known methods that perform this process in favorable conditions. However, nowadays there are many adversities that reduce the identification performance. This work aims the creation of a new OS fingerprinting tool that bypass these actual problems. The proposed method is based on the use of attractors reconstruction and neural networks to characterize and classify pseudo-random numbers generators

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An alternative box-type solar cooker built starting from the scrap of a tire and a scrap of old office chair is presented, which principles functions are the effect greenhouse and the concentration. The tire served as structure for making of is the baking enclosure where the absorber (roasting pan 20x30cm) of the solar is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven/cook for the concentration of the radiation and a reflecting parable was introduced in the baking enclosure for the exploitation of the incident reflected radiation inside of the oven/cook. The oven/cook is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove/cook in study will be demonstrate. The average internal temperature of the absorber was around 152,3°C and the internal temperature around 110°C. Will demonstrate that toits low cost and good thermal performance, represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present work presents a contribution in the study of modelings of transference of heat for foods submitted to the experimental tests in the considered solar oven, where the best modeling for the beefburger of chicken in study was evaluated, comparing the results, considering this food as a half-infinite(1er object considered model) and,after that, considered the chicken beefburger as a plain plate in transient regimen in two distinct conditions: not considering and another model considering the contribution of the generation term, through the Criterion of Pomerantsev. The Sun, beyond life source, is the origin of all the energy forms that the man comes using during its history and can be the reply for the question of the energy supplying in the future, a time that learns to use to advantage in rational way the light that this star constantly special tax on our planet. Shining more than the 5 billion years, it is calculated that the Sun still in them will privilege for others 6 billion years, or either, it is only in the half of its existence and will launch on the Earth, only in this year, 4000 times more energy that we will consume. Front to this reality, would be irrational not to search, by all means technical possible, to use to advantage this clean, ecological and gratuitous power plant. In this dissertation evaluate the performance of solar cooker of the type box. Laboratory of Solar Energy of the Federal University of the Great River of North - UFRN was constructed by the group (LES) a model of solar stove of the type box and was tested its viability technique, considering modeling foods submitted when baking in the solar oven, the cooker has main characteristic the easiness of manufacture and assembly, the low cost (was used material accessible composition to the low income communities) and simplicity in the mechanism of movement of the archetype for incidence of the direct solar light. They had been proposals modeling for calculations of food the minimum baking time, considering the following models of transference of heat in the transient state: object the halfinfinite, plain plate and the model of the sphere to study the necessary temperature for the it bakes of bread (considering spherical geometry). After evaluate the models of transmission of heat will be foods submitted you the processes of to it bakes of, the times gotten for the modeling with the experimental times of it bakes in the solar oven had been compared, demonstrating the modeling that more good that it portraies the accuracies of the results of the model

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Metabolic flux analysis (MFA) is a powerful tool for analyzing cellular metabolism. In order to control the growth conditions of a specific organism, it is important to have a complete understanding of its MFA. This would allowed us to improve the processes for obtaining products of interest to human and also to understand how to manipulate the genome of a cell, allowing optimization process for genetic engineering. Streptomyces olindensis ICB20 is a promising producer of the antibiotic cosmomycin, a powerful antitumor drug. Several Brazilian researchers groups have been developing studies in order to optimize cosmomycin production in bioreactors. However, to the best of our knowledge, nothing has been done on metabolic fluxes analysis field. Therefore, the aim of this work is to identify several factors that can affect the metabolism of Streptomyces olindensis ICB20, through the metabolic flux analysis. As a result, the production of the secondary metabolite, cosmomycin, can be increased. To achieve this goal, a metabolic model was developed which simulates a distribution of internal cellular fluxes based on the knowledge of metabolic pathways, its interconnections, as well as the constraints of microorganism under study. The validity of the proposed model was verified by comparing the computational data obtained by the model with the experimental data obtained from the literature. Based on the analysis of intracellular fluxes, obtained by the model, an optimal culture medium was proposed. In addition, some key points of the metabolism of Streptomyces olindensis were identified, aiming to direct its metabolism to a greater cosmomycin production. In this sense it was found that by increasing the concentration of yeast extract, the culture medium could be optimized. Furthermore, the inhibition of the biosynthesis of fatty acids was found to be a interesting strategy for genetic manipulation. Based on the metabolic model, one of the optimized medium conditions was experimentally tested in order to demonstrate in vitro what was obtained in silico. It was found that by increasing the concentration of yeast extract in the culture medium would induce to an increase of the cosmomycin production

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Background: Obesity may affect the respiratory system, causing changes in respiratory function and in the pulmonary volumes and flows. Objectives: To evaluate the influence of obesity in the movement of thoracoabdominal complex at rest and during maximal voluntary ventilation (MVV), and the contribution between the different compartments of this complex and the volume changes of chest wall between obese and non-obese patients. Materials and Methods: We studied 16 patients divided into two groups: the obese group (n = 8) and group non-obese (n = 8). The two groups were homogeneous in terms of spirometric characteristics (FVC mean: 4.97 ± 0.6 L - 92.91 ± 10.17% predicted, and 4.52 ± 0.6 L - 93.59 ± 8.05%), age 25.6 ± 5.0 and 26.8 ± 4.9 years, in non-obese and obese respectively. BMI was 24.93 ± 3.0 and 39.18 ± 4.3 kg/m2 in the groups investigated. All subjects performed breathing calm and slow and maneuver MVV, during registration for optoelectronic plethysmography. Statistical analysis: we used the unpaired t test and Mann-Whitney. Results: Obese individuals had a lower percentage contribution of the rib cage abdominal (RCa) during breathing at rest and VVM. The variation of end expiratory (EELV) and end inspiratory (EILV) lung volumes were lower in obese subjects. It has been found asynchrony and higher distortion between compartments of thoracoabdominal complex in obese subjects when compared to non-obese. Conclusions: Central obesity impairs the ventilation lung, reducing to adaptation efforts and increasing the ventilatory work

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objetivo: Determinar os efeitos agudos de diferentes intensidades de pressão expiratória positiva sobre o padrão respiratório e volumes operacionais de pacientes com doença de Parkinson. Métodos: Foram eleitos para o estudo 23 pacientes em estágios II ou III da doença, estando na condição ON , sendo 8 excluídos, e 15 controles saudáveis. Os indivíduos foram submetidos a uma avaliação inicial, constando de dados gerais, avaliação antropométrica, função pulmonar e força muscular respiratória. Após esta etapa inicial, realizou-se a avaliação dos volumes pulmonares com pletismografia optoeletrônica associado a utilização de pressão expiratória positiva (PEP) em três intensidades de pressão positiva, 10 cmH2O, 15 cmH2O e 20 cmH2O em ordem aleatória. Resultados: O grupo Parkinson apresentou valores espirométricos e de força muscular respiratória significativamente menores que o grupo controle (p<0.01). Houve diferença nos valores de volume corrente (Vt) do grupo Parkinson em relação ao grupo controle na respiração tranqüila (p<0.001) e aumento no Vt do grupo Parkinson com uso das três intensidades de PEP (p<0.001), sem diferenças estatisticamente significativas entre as intensidades e com diferença na distribuição compartimental do Vt entre os grupos (p<0.001). O fluxo inspiratório médio e o volume minuto do grupo Parkinson foram menores em relação ao grupo controle na respiração tranqüila (p<0.001) e aumentaram com o uso das três intensidades de PEP (p<0.001), sem diferenças estatisticamente significativas entre as intensidades. Houve diferença na variação dos volumes operacionais entre os grupos em todas as intensidades de PEP (p < 0.001). O volume pulmonar expiratório final não aumentou no grupo Parkinson com uso de PEP. O volume pulmonar inspiratório final aumentou no grupo Parkinson em todas intensidades de PEP (p < 0.001), não havendo diferenças entre as intensidades. Conclusão: Os pacientes com doença de Parkinson apresentam alterações em diferentes componentes do padrão respiratório e a terapia com PEP determina modificações clinicamente importantes nos volumes pulmonares, considerando a intensidade de 10 cmH2O suficientes para este objetivo terapêutico

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Exception Handling (EH) is a widely used mechanism for building robust systems. In Software Product Line (SPL) context it is not different. As EH mechanisms are embedded in most of mainstream programming languages (like Java, C# and C++), we can find exception signalers and handlers spread over code assets associated to common and variable SPL features. When exception signalers and handlers are added to an SPL in an unplanned way, one of the possible consequences is the generation of faulty family instances (i.e., instances on which common or variable features signal exceptions that are mistakenly caught inside the system). In this context, some questions arise: How exceptions flow between the optional and alternative features an LPS? Aiming at providing answers to these questions, this master thesis conducted an exploratory study, based on code inspection and static analysis code, whose goal was to categorize the main ways which exceptions flow in LPSs. To support the study, we developed an static analysis tool called PLEA (Product Line Exception Analyzer) that calculates the exceptional flows of LPSs, and categorize these flows according to the features associated with handlers and signalers. Preliminary results showed that some types of exceptional flows have more potential to yield failures in exceptional behavior of SLPs