A influência do esqueleto açúcar-fostato no transporte da molécula de DNA

This dissertation analyses the influence of sugar-phosphate structure in the electronic transport in the double stretch DNA molecule, with the sequence of the base pairs modeled by two types of quasi-periodic sequences: Rudin-Shapiro and Fibonacci. For the sequences, the density of state was calculated and it was compared with the density of state of a piece of human DNA Ch22. After, the electronic transmittance was investigated. In both situations, the Hamiltonians are different. On the analysis of density of state, it was employed the Dyson equation. On the transmittance, the time independent Schrödinger equation was used. In both cases, the tight-binding model was applied. The density of states obtained through Rudin-Shapiro sequence reveal to be similar to the density of state for the Ch22. And for transmittance only until the fifth generation of the Fibonacci sequence was acquired. We have considered long range correlations in both transport mechanism

Evolução de Rádio Fontes Duplas Extragalácticas

Double radio sources have been studied since the discovery of extragalactic radio sources in the decade of 1930. Since then, several numerical studies and analytical models have been proposed seeking a better understanding of the physical phenomena that determines the origin and evolution of such objects. In this thesis, we intended to study the evolution problem of the double radio sources in two fronts: in the ¯rst we have developed an analytical self-similar model that represents a generalization of most models found in the literature and solve some existent problems related to the jet head evolution. We deal with this problem using samples of hot spot sizes to ¯nd a power law relation between the jet head dimension and the source length. Using our model, we were able to draw the evolution curves of the double sources in a PD diagram for both compact sources (GPS and CSS) and extended sources of the 3CR catalogue. We have alson developed a computation tool that allows us to generate synthetic radio maps of the double sources. The objective is to determine the principal physical parameters of those objects by comparing synthetic and observed radio maps. In the second front, we used numeric simulations to study the interaction of the extra- galactic jets with the environment. We simulated situations where the jet propagates in a medium with high density contrast gas clouds capable to block the jet forward motion, forming the distorted structures observed in the morphology of real sources. We have also analyzed the situation in which the jet changes its propagation direction due to a change of the source main axis, creating the X-shaped sources. The comparison between our simulations and the real double radio sources, enable us to determine the values of the main physical parameters responsible for the distortions observed in those objects

A Relação professor-aluno e a afirmação do discente como sujeito do processo projetual: um estudo exploratório sobre a produção do trabalho final de graduação em arquitetura e urbanismo na UFC e na UFRN

This work deals with teacher-student relationship (TSR), held in a very special moment: the semester of graduation of architecture and urbanism, where students prepare the final work called Graduation Final Work (GFW). That is the last stage to obtain the title of architect and urban planner in Brazil. The text discusses this problem in several ways, emphasing the relationship between graduated student and his/her mentors into the consolidation process of the student as an actor of the planning process, here defined as "autonomy". The work is focused on understanding the TSR in order to elucidate its importance for improvement of teaching bases on development of the GFW, more than the relation between curriculum and institution. Related with the exploratory characteristic of this master thesis, methodologically, the field work happened through: (i) observation of mentorship guidance, (ii) interviews, and (iii) application of questionnaires to teachers and students. Participated 10 pairs of student and mentors of two federal university of Northeast: 05 pairs of the Federal University of Ceará (UFC) and 05 pairs of the Federal University of Rio Grande do Norte (UFRN). The results presented the development of the GFW as a difficult process / fearful for students, highlighting the main problem situations: the difficulty in choosing the theme, the super-sizing of the process, students' insecurities, and parental relationship with the supervisor process. Summing up, the work indicates that the students has a limited autonomy on the GFW process, which calls for a revision in order to promote the consolidation of the student autonomy, which must be observed for some positions recognition of the role of each actor in the process of orientation

Obtenção de polímeros de LCC para aplicação como antioxidante de biodiesel de soja

Biodiesel is a fuel obtained from vegetable oils, such as soy, castorbean, among others. The monoester of fatty acid of these oils have chains with mono, di and tri double connections. The presence of these insaturations are susceptible to oxidization. Antioxidants are substances able to prevent oxidization from oils, fats, fat foods, as well as esters of Alquila( biodiesel). The objective of this work is to summarize a new antioxidant from the Cashew Nut Shell Liquid (CNSL) using the electrolysis technique. A current of 2 amperes was used in a single cell of only one group and two eletrodos of stainless steel 304 in a solution of methanol, together with the eletrolits: acetic acid, sodium chloride and sodium hydroxide, for two hours of agitation. The electrolysis products are characterized by the techniques of cromatography in a thin layer, spectroscopy of infrared and gravimetric analysis. The material was submitted to tests of oxidative stability made by the techniques of spectropy of impendancy and Rancimat (EN 14112). The analyses of characterization suggest that the polimerization of the electrolytic material ocurred. The application results of these materials as antioxidants of soy biodiesel showed that the order of the oxidative stability was obtained by both techniques used

Evidências de validação de um protocolo para assistência às pessoas com úlceras venosas em serviços de alta complexidade

Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs . After analyzing the ratios obtained in this step, which reported kappa between 0.75 and 0.96 and between 0.80 and 0.98 IVC, and the suggestions of the judges, the protocol was adjusted and subjected to empirical evidence to validate the clinical setting at the University Hospital Onofre Lopes in Natal / RN. Evidence of validation in the clinical setting involved 4 judges who acted in pairs (paired) evaluated 32 patients with venous ulcers in the clinical context of high complexity. In both stages, we used the Kappa Index and Content Validity Index to analyze the responses of the judges. The parameters set as acceptable for these indices were: Kappa ≥ 0.61 and Content Validity Index > 0.80. Any evidence of content validity, as evidence of validation in the clinical context, the protocol items that have not reached Kappa and Content Validity Index established indices were excluded and some items were modified or added after suggestions. The process of content validation evidence and evidence of validation in the clinical setting allowed the improvement of the protocol for the care of people with venous ulcers initially proposed. The initial version of the protocol, built from the literature, contained 15 categories and 108 items; after evidence of content validity, remained the reduction to 15 categories with 91 items; the final version, clinically validated, is composed of the same 15 categories, 76 items. The protocol was validated in its content and in the clinical aspect, so we accepted the alternative hypothesis in the study. This protocol may contribute to the care system, allowing tailor behaviors and promote greater resolution in the treatment of people with venous ulcers in health services of high complexity

Análise de linhas de fita não-homogêneas com camadas dielétricas anisotrópicas

Abstract

Antenas e superfícies seletivas de freqüência reconfiguráveis para sistemas de comunicação sem fio

This work aims to present how the reconfigurable microstrip antennas and frequency selective surfaces can be used to operate at communication systems that require changing their operation frequency according to system requirements or environmental conditions. The main purpose is to present a reconfigurable circular microstrip antenna using a parasitic ring and a reconfigurable dipole frequency selective surface. Thereupon there are shown fundamental topics like microstrip antennas, PIN diodes and the fundamental theory of reconfigurable antennas and frequency selective surfaces. There are shown the simulations and measurements of the fabricated prototypes and it is done an analysis of some parameters like the bandwidth and radiation pattern, for the antennas, and the transmission characteristics, for the frequency selective surface. Copper strips were used in place of the diodes for proof of the reconfigurability concept

Desenvolvimento de métodos construtivos e de novos materiais empregados na confecção de cartuchos de próteses de membros inferiores

The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

Modelos auto-similares para rádio fontes extragalácticas.

This work is a detailed study of self-similar models for the expansion of extragalactic radio sources. A review is made of the definitions of AGN, the unified model is discussed and the main characteristics of double radio sources are examined. Three classification schemes are outlined and the self-similar models found in the literature are studied in detail. A self-similar model is proposed that represents a generalization of the models found in the literature. In this model, the area of the head of the jet varies with the size of the jet with a power law with an exponent γ. The atmosphere has a variable density that may or may not be spherically symmetric and it is taken into account the time variation of the cinematic luminosity of the jet according to a power law with an exponent h. It is possible to show that models Type I, II and III are particular cases of the general model and one also discusses the evolution of the sources radio luminosity. One compares the evolutionary curves of the general model with the particular cases and with the observational data in a P-D diagram. The results show that the model allows a better agreement with the observations depending on the appropriate choice of the model parameters.

Propriedades magnéticas quase-estáticas de filmes ferromagnéticos amorfos de FeCuNbSiB

Today, one of the topics that attracts interest of the scientific community is the understanding of magnetic properties of magnetic systems with reduced dimensions, in particular, ferromagnetic thin films. In this case, the comprehension and control of these properties, as well as the development of routes to obtain them, are crucial issues in many aspects of current and future technologies for storage and transmission of information in the electro-electronic industry. There are several materials that exhibit soft magnetic properties, and we highlight the amorphous alloys and that ones obtained by partial crystallization, so-called nanocrystalline materials. The production of these alloys as magnetic ribbons is very common in scientific and technological area, but there are just a few works related to the production of these alloys as thin films. In this work, we studied the quasi-static magnetic properties of ferromagnetic thin films based on FeCuNbSiB in a wide range of thicknesses, from 20 to 500 nm, produced by sputtering. In particular, after the structural characterization performed via X-ray diffraction, the magnetic properties of the sets of samples were investigated using experimental magnetization curve, obtained using a vibrating sample magnetometer, as well as through theoretical curves obtained by theoretical modeling and numerical computation. The modeling process is based on the Stoner Wohlfarth model applied to three dimensions, and adds some energy terms, using as reference experimental results of magnetization. In this case, from the comparison between theoretical and experimental results and the analysis of the constant anisotropy behavior as a function of film thickness, we aim to obtain further information on the magnetization process of the samples, to identify routes for the production of thin films and develop a theoretical to films to use it, in the future, in the obtainment of the theoretical curves of some magnetic measurements, such as magnetoimpedance and magnetoresistance

Ser-no-mundo com a criança portadora de câncer compreendendo a experiência de psicólogos nos serviços de oncologia pediátrica de Natal-RN

Cancer goes on to be a frightening disease by humanity, simetimes,it is considered as death, suffering and stigma synonym. Occurring at childhood, this meaning seems to acquire a more intense conotation, having in view of the perplexity and godliness feeling in the presence of the precocity of events, nearly always associated to the death. A psychologist co-existence with the cancer children is going acquiring, thus, a permeated sense by incognitas , fears and fantasy, which raised us the following question: how does the psychologist that answers children with cancer lives this experience? Therefore, the aim this research was to understand this co-existence experience. Our theoretical perspective comes from an existencial fenomenology and, more specifically, the Humanistic Approach and Martin Heidegger Existencial Ontology. The metodology is qualitative of phenomenological character. The access instrument to the experience was the narrative, such as purpose by Walter Benjamin. They were carried out nine semi-open interviews with psychologists who work on pediatric oncology services of Natal-RN city. Such interviews were recorded in cassette, transcripted and later, re-educated. These interviews were recorded, transcribed and later on edited with the help of the interviewee and turned into a text. The narrative comprehension was carried out on Heidegger Existencial Ontology, on dada exaustive reading and the clipping of indicative passages of experience sense of being psychologist on this area. The research suggests that the experience is oriented of clinic kowing-doing, being crossed by implications of key thematics which indicate the care as central ontologic element that orientates the way as these professionals come being in the world in association with the clientèle. Besides, the caring experience of these children acquire the sense of true living experience, since the cancer undoes the immortality illusion, launching the psychologist to his/her condition of being to the death and with that, calling him/her the authenticity. Is is only not dealt with to experience the anguish and the death imminence, but above all, re-meaning them in favour of a continual learning, of quality answering , besides other possibilities. Working with child cancer brings news perspectives and world views, making the psychologist a more human people and sensitive to the distracted needs. And we believe that, regardless of area which actuates, being psychologist is a particular way which choose to be citizen. Is is a project that will be delimited by society, history and culture and after all, by us like human being. Therefore, we understand that the results this research suggest the discussed thematic deepening on this intervention field in order to new sense possibilities can arise giving origin to other reflections about the clinical practice, the professional formation in Psychology and other possible developments

Relação amorosa e tentativa de suicídio na adolescência : uma questão de (des)amor

Suicide rates have been rising all over the world. In Rio Grande do Norte state, a study carried out by Dutra (1999) investigated suicide rates among youngsters and found that in 1997 alone 244 cases of suicide attempt were registered. The author took an interest in studying this phenomenon among adolescents after reviewing Dutra s study and the technical literature on suicide. In addition to that, another topic caught her attention and raised new research questions: suicide attempts motivated by love, i.e., the end of a relationship, the fantasy of being abandoned by a partner. These have made the author to question how love manifested itself among adolescents and how it could become a reason for adolescents to give up their lives. Based on the data she analyzed and the research questions she developed, her research objective was to understand how adolescents who have attempted suicide because of love-related reasons have gone through this experience. The theoretical reference for the research was the Client-centered Therapy and more specifically, the construct self , according to Carl Rogers. The methodological strategy was inspired by the existential-phenomenological strategy. It used the narrative as a research instrument, inspired by the work of Walter Benjamim (1994) which was developed into a research strategy by Schmidt (1990). Four youngsters (three male and one female) have participated in this study. They have attempted suicide for love-related reasons during dolescence, when they were 12 to 18 years old. The interviews were recorded on cassette tapes, transcribed and literalized into narratives. The understanding of the narratives was based on the meanings that emerged from the youngsters speeches, as well as from the moments that touched the author. These moments highlighted the meaning of the experience of giving up life and the experience of love-based relationship as experienced by the youngsters. The study detected, among the adolescents who were interviewed, the existence of impulsiveness related to the suicide attempt. Also, the majority of the interviewees came from unstructured family backgrounds and had lost of one of their parents or had to face their parents divorce. The suicide was attempted by these youngsters through the ingestion of medicines. The research also revealed that the youngsters had regretted attempting suicide and felt guilty about it. With regards to their self-evaluation, the author observed that the youngsters had low self-esteem, negative perceptions about themselves and distorted views of themselves. These findings helped the author to reflect on the close relationship between the construct self and the suicide attempt. She also observed that a few factors, i.e., family context, education, social and cultural values, have influenced the way the youngsters perceived themselves . The results of this research confirm the idea that we have to understand the suicide attempt as a multi-determined phenomenon. This study contributed to the analysis and reflection on the factors that contribute to suicide attempts thus providing a foundation for the development of public health programs and policies to deal with this topic

Estudo de titanatos nanoestruturados obtidos por tratamento hidrotérmico de óxido de titânio em meio alcalino

TiTanate NanoTubes (TTNT) were synthesized by hydrothermal alkali treatment of TiO2 anatase followed by repeated washings with distinct degrees of proton exchange. TTNT samples with different sodium contents were characterized, as synthesized and after heattreatment (200-800ºC), by X-ray diffraction, scanning and transmission electron microscopy, electron diffraction, thermal analysis, nitrogen adsorption and spectroscopic techniques like FTIR and UV-Vis diffuse reflectance. It was demonstrated that TTNTs consist of trititanate structure with general formula NaxH2−xTi3O7·nH2O, retaining interlayer water in its multiwalled structure. The removal of sodium reduces the amount of water and contracts the interlayer space leading, combined with other factors, to increased specific surface area and mesopore volume. TTNTs are mesoporous materials with two main contributions: pores smaller than 10 nm due to the inner volume of nanotubes and larger pores within 5-60 nm attributed to the interparticles space. Chemical composition and crystal structure of TTNTs do not depend on the average crystal size of the precursor TiO2-anatase, but this parameter affects significantly the morphology and textural properties of the nanostructured product. Such dependence has been rationalized using a dissolution-recrystallization mechanism, which takes into account the dissolution rate of the starting anatase and its influence on the relative rates of growth and curving of intermediate nanosheets. The thermal stability of TTNT is defined by the sodium content and in a lower extent by the crystallinity of the starting anatase. It has been demonstrated that after losing interlayer water within the range 100-200ºC, TTNT transforms, at least partially, into an intermediate hexatitanate NaxH2−xTi6O13 still retaining the nanotubular morphology. Further thermal transformation of the nanostructured tri- and hexatitanates occurs at higher or lower temperature and follows different routes depending on the sodium content in the structure. At high sodium load (water washed samples) they sinter and grow towards bigger crystals of Na2Ti3O7 and Na2Ti6O13 in the form of rods and ribbons. In contrast, protonated TTNTs evolve to nanotubes of TiO2(B), which easily convert to anatase nanorods above 400ºC. Besides hydroxyls and Lewis acidity typical of titanium oxides, TTNTs show a small contribution of protonic acidity capable of coordinating with pyridine at 150ºC, which is lost after calcination and conversion into anatase. The isoeletric point of TTNTs was measured within the range 2.5-4.0, indicating behavior of a weak acid. Despite displaying semiconductor characteristics exhibiting typical absorption in the UV-Vis spectrum with estimated bandgap energy slightly higher than that of its TiO2 precursor, TTNTs showed very low performance in the photocatalytic degradation of cationic and anionic dyes. It was concluded that the basic reason resides in its layered titanate structure, which in comparison with the TiO2 form would be more prone to the so undesired electron-hole pair recombination, thus inhibiting the photooxidation reactions. After calcination of the protonated TTNT into anatase nanorods, the photocatalytic activity improved but not to the same level as that exhibited by its precursor anatase

Síntese e caracterização de compostos de coordenação homolépticos e heterolépticos com o ligante ácido kójico

The present work has as main objective to contribute to the coordination chemistry of the ligand kojic acid, with the synthesis and characterization of the homoleptic compounds [Al(kj)3], [Fe(kj)3], [Fe(kj)2], [Cu(kj)2] e [Ru(kj)3], and the new heteroleptic complexes, trans- K2[Fe(kj)2(CN)2] and trans-Na2[Ru(kj)2(CN)2]. The obtained compounds were characterized by vibrational spectroscopy in the infrared region (IV) and Electronic spectroscopy in the ultraviolet and visible region (Uv-Vis). The infrared results indicated the coordination of the bidentate ligand kojic acid, due to reductions in the values of the stretching frequencies of the carbonyl and double bonds, compared to the free ligand for all complexes obtained. The presence of new vibrational modes indicated the change of symmetry of the molecules in the new compounds synthesized. Additionally, the presence of vibrational modes assigned to metal-oxygen also contributed to confirm the ligand coordinating to the metal ions. Through this technique, was also possible to perform correlations of the numbers of vibrational modes, in the region 1400-900 cm-1 and the compounds geometry. The heteroleptic compounds exhibited υC≡N in 2065 and 2053 cm-1, respectively, for the trans-K2[Fe(kj)2(CN)2] and trans-Na2[Ru(kj)2(CN)2], indicating coordination of the cyano ligand to metal ions FeII e RuII. Comparing the obtained values with literature data was possible to identify the complex isomerism as trans. In relation to the results of electronic spectroscopy, studies of pH variation of kojic acid provided information on the distribution of electron density in the molecule, showing characteristic spectral profile of kojic ion and its protonated form (Hkj, kojic acid), with two bands at 215 and 269 nm, or deprotonated (kj-), with bands at 226 and 315 nm. The electronic spectra obtained for all complexes in aqueous medium, in the ultraviolet region, exhibited variations of the energies assigned to kojic acid intraligand transitions while in the visible region, only transitions assigned to charge transfer of iron and ruthenium complex have been identified