Ética na pesquisa em Administração

Ethics on scientific research is approached and often discussed in several areas of knowledge connected to health. In the Administration area there are very few studies which approach the topic of ethics on research. The present paper tried to fill in this gap in the production of knowledge about the topic, investigating how the ethical principles found in the literature and in the codes of conduct are noticed and taken into account in Administration research activities developed by acting researchers in Administration Post Graduation Programs. Theoretically speaking, the study was based mainly on the approaches by Creswell (2007) and Bell and Bryman (2007), which discuss the research ethical principles. Methodologically speaking it was all about an exploratory kind of study, with qualitative research approach. Upon data collection, personal interviews were made aiming at its depth and focus groups were formed. The first stage had interviews with four experienced researchers who took part on a teaching and researching event and on the second stage we used the focus group technique. The focus groups were done in four college institutions along with the post graduation programs in Administration in the states of Rio Grande do Norte, Paraíba and Pernambuco, in Brazil. The results suggest the existence of general principles and parameters for the scientific research recommended in the literature and on official resolution. However, in the Administration area, there are only a few recommendations of good practices when it comes to submitting articles for scientific publications but we found no guidance with ethical principles and parameters which cover all the activities in the scientific research and which specifically meet the research particularities in Administration. The main ethical dilemma pointed by the researchers refers to ethical questions which arise at the time of data collection and on disclosing the results. Most researchers do not know the guidelines and the ethical norms on ethics about research that we have in our country neither do they send in their projects to the research ethics committee. When dilemma arises, they decide the ethical question based on their values and common sense. These elements confirm the thesis that the researcher s procedure in the research activities in Administration is predominantly signed by personal values or by common sense and less by ethical principles, whether by not knowing the normative instruments related to ethics or by disagreeing with any disciplining rules on ethical behavior in the research

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic