86 resultados para Estruturas verticais no leito de cheia
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.
Resumo:
The research in question looked for to establish the relation between the motivation (of the proprietor of apartment) to change itself of another one apartment, in closed vertical condominium (residential mobility) in the period of the recognition of the necessity, and the satisfaction with the apartment after consume. The universe or the population chosen for the development of the study was of proprietors of apartment in vertical condominiums located in the region metropolitan of Natal. The analysis of data was made using the techniques of linear regression and logistic regression between variables. The linear regression found relations between the motivations for housing change and the satisfaction in after consume with some attributes of the apartment. The logistic regression showed that relations between the motivations for change and the general satisfaction to the apartment exist as a whole, in the period after consumes. With regard to the motivation to change itself of a apartment for another one, some reasons shown more motivation them the others. The research found different degrees of satisfaction with certain characteristics of the apartment and degrees of no satisfaction with others. Finally the results of the research had contributed for the reply of the problem that guided the present study, therefore had obtained in such a way to find how much logistic not linear relations between the two periods purchase (recognition of the necessity and evaluation after consume) and had elucidated the process that goes since the choice the product until the satisfaction of the necessities
Resumo:
The goal of the research was to investigate the energy performance of residential vertical buildings envelope in the hot and humid climate of Natal, capital of Rio Grande do Norte, based in the Technical Regulation of Quality for Energy Efficiency Level in Residential Buildings (RTQ -R), launched in 2010. The study pretends to contribute to the development of design strategies appropriate to the specific local climate and the increasing of energy efficiency level of the envelope. The methodological procedures included the survey in 22 (twenty two) residential buildings, the formulation of representative prototypes based on typological and constructives characters researched and the classification of the level of energy efficiency in the envelopment of these prototypes, using as a tool the prescriptive method of the RTQ-R and the parametric analyzes from assigning different values of the following variables: shape of the pavement type; distribution of housing compartments; orientation of the building; area and shading of openings; thermal transmittance, and solar absorptance of opaque materials of the frontage in order to evaluate the influence of these on the envelopment performance. The main results accomplished with this work includes the qualification of vertical residential buildings in Natal/RN; the verification of the adequacy of these buildings to local climate based from the diagnosis of the thermal energy of the envelopment performance, the identification of variables with more significant influence on the prescriptive methodology of RTQ-R and design solutions more favorable to obtain higher levels energy efficiency by this method. Finally, it was verified, that some of these solutions proved contradictory in relation to the recommendations contained in the theoretical approaches regarding environmental comfort in hot and humid weather, which indicates the need for improvement of the prescriptive method RTQ-R and further research on efficient design solutions
Resumo:
Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic
Resumo:
In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.
Resumo:
This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.
Resumo:
The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry
Resumo:
The State of Paraíba is one of the most dynamic states of Brazil, strategically located in the northeast, is notable for the excellent potential for integration of different transportation modes forming the states of Rio Grande do Norte, Pernambuco and Alagoas. The dynamic that occurs with port activity causes changes in the space where it is installed. And the elements of this space are always more than suffering direct or indirect influences as the flow in the port is expanded. Therefore, this region became subject to the accidental spillage of oil, because it presents a heavy traffic of ships of various sizes that can run aground or collide with oil causing accidental events. The study of geomorphological and sedimentological compositions of seafloor becomes important as more is known about the relationships between these parameters and associated fauna, and can identify their preferred habitats. The database background, acoustically collected along the proposed study area, is a wealth of information, which were duly examined, cataloged and made available. Such information can serve as an important tool, providing a geomorphological survey of the sedimentary area studied, and come to subsidize, in a flexible, future decision making. With the study area Port of Cabedelo, Paraíba - Brazil, this research aimed to evaluate the influence of the tidal surface and background in modeling the seabed, including the acquisition of information about the location of submerged rocky bodies and the depth of these bodies may turn out to be natural traps for the trapping of oil in case of leaks, and obtain the relationship between types of bed and the hydrodynamic conditions present in the region. In this context, for this study were collected bathymetric data (depth) and physical oceanographic (height of water column, water temperature, intensity and direction of currents, waves and turbidity), meteorological (rainfall, air temperature, humidity, winds and barometric pressure) of the access channel to the Port of Cabedelo / PB and its basin evolution (where the cruise ships dock), and includes tools of remote sensing (Landsat 7 ETM +, 2001), so that images and the results are integrated into Geographic Information Systems and used in the elaboration of measures aimed at environmental protection areas under the influence of this scale facilities, serving as a grant to prepare a contingency plan in case of oil spills in the region. The main findings highlight the techniques of using hydroacoustic data acquisition together bathymetric surveys of high and low frequency. From there, five were prepared in bathymetric pattern of Directorate of Hydrography and Navigation - DHN, with the depth in meters, on a scale of 1:2500 (Channel and Basin Evolution of Access to Port of Cabedelo), where there is a large extent possible beachrocks that hinder the movement of vessels in the port area, which can cause collisions, running aground and leaking oil. From the scatter diagram of the vectors of currents, it can be seen as the tidal stream and undergoes a channeling effect caused by the bidirectional effect of the tide (ebb and flood) in the basin of the Port of Cabedelo evolution in NW-direction SE and the highest speed of the currents occurs at low tide. The characterization weather for the period from 28/02 to 04/07/2010 values was within the expected average for the region of study. The multidisciplinary integration of products (digital maps and remote sensing images), proved to be efficient for the characterization of underwater geomorphological study area, reaching the aim to discriminate and enhance submerged structures, previously not visible in the images
Resumo:
Oil recovery using waterflooding has been until now the worldwide most applied method, specially for light oil recovery, its success is mainly because of the low costs involved and the facilities of the injection process. The Toe- To-Heel Waterflooding TTHWTM method uses a well pattern of vertical injector wells completed at the bottom of the reservoir and horizontal producer wells completed at the top of it. The main producing mechanism is gravitational segregation in short distance. This method has been studied since the early 90´s and it had been applied in Canada with positive results for light heavy oils, nevertheless it hasn´t been used in Brazil yet. In order to verify the applicability of the process in Brazil, a simulation study for light oil was performed using Brazilian northwest reservoirs characteristics. The simulations were fulfilled using the STARS module of the Computer Modelling Group Software, used to perform improved oil recovery studies. The results obtained in this research showed that the TTHWTM well pattern presented a light improvement in terms of recovery factor when compared to the conventional 5- Spot pattern, however, it showed lower results in the economic evaluation
Resumo:
The kinanthropometric characteristics are used by the sports science as selection criteria and detection of talents. Hence, this study aimed at comparing the anthropometrical profile, the body composition, the somatotype and the vertical jumps of the beach volleyball players. This study consists of 79 male beach volleyball players, being forty nine (n=49) Brazilian participants of the National Circuit and thirty (n=30) of 15 countries participating in the XV Pan American Games. In order to analyze the vertical jumps of the Brazilian the participants were allocated into two groups (G1 and G2) in agreement with the national ranking of their teams. The vertical jump protocol developed by Smith and collaborators was used to evaluate the vertical jumps of spike and block. The Heath-Carter anthropometrical technique (1990) was used for calculating the somatotype. The Student s t test with the Bonferroni adjustment was used to calculate the differences among the investigated variables. The multiple regression analysis was used to identify the contributions of the anthropometrical variables in the performance of the vertical jumps and the multivariance analysis was used to calculate the differences among the components of the somatotype. The Brazilian athletes of G1 were better than G2 in the spike jump (p <0.01), block jump (p <0.01) and in the block difference (p <0.01). The prediction model of the spike jump of G2 included the body mass and standing spike reach (adjusted R2 = 0.77), the body mass and the standing block reach were also included in the model of the block jump (adjusted R2 = 0.73). The regression model of G1 was not statistically significant. As for the somatotype, statistically significant differences were found between the Brazilians and the Pan Americans (Wilks' lambda = 0.498; p <0.05). The Brazilian somatotype was classified as balanced mesomorph (2.7-4.3-3.0) and the Pan American somatotype as endomorphic mesomorph (3.5-4.6-2.4). As to the specific position of the block game (2.8-4.3-2.9) and the defense game (2.6-4.4-3.0), the Brazilian somatotype was classified as balanced mesomorph and the Pan American somatotype, the block (3.7-4.4-2.4) and the defense (3.4-4.9-2.3), was classified as endomorphic mesomorph. In conclusion, the vertical jump height (spike and block) influences the male Brazilian beach volleyball players performance. The physical type of the Brazilian blockers and defenders was similar with relationship to the somatotype. The Brazilian and Pan American beach volleyball players differ in terms of kinanthropometric characteristics. This work had a multidisciplinary feature with the participation of several departments and laboratories, like the Physiotherapy Department, the Nutrition Department, the Physical Education Laboratory, thus corroborating the multidisciplinary research feature
Resumo:
This study aimed to validate the technology at Bed Bath System, in view of bedridden elderly and their caregivers, with a view to transforming the conventional paradigm regarding the practice of bodily hygiene held in bath chairs adapted in long-stay institutions for the elderly. This is an experimental study involving 51 (fifty one) elderly and 17 (seventeen) caregivers of three long-stay institutions for the elderly of the city of João Pessoa. For data collection, applied initially to cognitive assessment scale Mini Mental State Examination, with the aim of tracking the subject group of elderly cognitively able to participate in the study. In the second phase, to measure the percentage of agreement and disagreement about the attributes of the subjects of the shower chair and adapted the system for bed bath, used a questionnaire with closed questions, Likert scale model of four (4) points, with a good reliability index (0.728), estimated by alpha conbrach, evidenced by the Wilcoxon test a significant difference (P<0.05) between the responses of seniors and caregivers about the attributes involving technology system in bath bed and bath chair adapted, confirming the perspective of the subjects that the two systems differ significantly. However, the system bed bath got greater degree of agreement for their use, characterizing this system is a technology that makes the differential bed bath pleasurable action, quality and humanized
Resumo:
The Federal Constitution of 1988, when taking care of the economical order, denotes special concern in the abuses of the economical power and the disloyal competition. The mark to mediate of all this is, in fact, the defense and the consumer's protection, once this is final addressee of whatever if it puts at the consumption market. The coming of the Law 8.078/90, Code of Protection and Defense of the Consumer, inaugurates a time of effective concern with the homogeneous individual interests originating from of the consumption relationships. In this point, the focus of main to face of the present work lives, in other words, the protection of the right to the individual property, especially manifests in the exercise of the trade freedom that keeps direct relationship with the respective social function the one that is destined. The code of the consumer's defense doesn't just take care of this, but also of the other star of the relationships of the consumption. When affirming in the interruption VI of the art. 4th that the national politics of those relationships, finds ballast in the prohibition and repression efficient of all of the abuses committed in the consumption relationships, keeping inherent relationship-causality in the economical order, sculpted for the article 170 in the Constitution of 1988. In the generic plan, the mark of the present work is to question concerning the limits of the trade freedom and previsible collisions with protection norms and the consumer's defense, as well as factual convergences of those small systems, especially in what he/she refers to the innate interests to the suppliers. In the specific plan, we aspirated to identify the protection device-commands to the actors of the trade relationship, capable to guarantee the free competition in a global economy of market, seeking especially the Well-being, for soon afterwards, in an analytical perspective, to discover the possible applications that it holds the Federal Constitution, in headquarters of economical freedoms. It was observed that the consumer today doesn't need only of laws that their needs, fruit of the vulnerability that it is him/her meditate innate. He/she lacks, yes, of effective mechanisms that prevent lesions that can be them impinged by the suppliers at the time in that you/they are useful to repair the damages when happened, punishing the author of the damage
Resumo:
Zila Mamede left a great contribution to education and culture in Rio Grande do Norte during the 60s, when she built the most important outdoor library from the state the Camara Cascudo s bibliography. It is this aspect of her work that this text tries to apprehend and narrate. Different approaches have brought Zila Mamede to academy, but her work as a librarian yet did not have had any study. Her pioneer work on organizing and preparing professionals to deal with these constructions full of books was waiting to be told. This work articulates itself with the political and cultural production of Natal during the 60, because it was essential to configurate the city at this time. It was also necessary to interview Zila Mamede s friends, relatives and the people who worked with her. This research also demanded a review of many memoirs by potiguares , and the examination of newspapers and magazines to enlighten the period
Resumo:
This study aims to understand the feelings of patients admitted to the Intensive Care Unit (ICU) that experienced a change of shift at the bedside. The change of shift is one of the routines used by nursing in their work process and of great significance for the patient; therefore, deserves careful analysis in seeking to perfect themselves for the improvement of nursing care. It is a descriptive research, with a qualitative approach. The collection of information was performed using semi-structured interview, in August and September of 2011, after authorization from the Ethics Committee of the Federal University of Rio Grande do Norte, as opinion 290/2011. The analysis, based on interviews of patients, took the humanization as the thread of investigation backed by authors who deal on the subject and the theory of the gift of Marcel Mauss that sits on drug give-receive-return. The results indicate that the change of shift at the bedside but has not configured, the content of the speech of patients interviewed, as a moment that has generated fear and anxiety, could be deduced by the expression of silence, tears and other signs during interviews, how hard it is to live this experience. Nevertheless, despite this apparent tranquility, revealed uncertainty and apprehension face the speech of professional, during the visit at the bedside, particularly when referring to their health and their neighbors. On the other hand, the indifference to the participation of the patient at the time of the visit, expressing an attitude of merely technical nature, dehumanizes the act of taking care, the essence of nursing. And, for all the patients that we understand, about the visit to the bedside, as well as the ICU, we can infer that there is suffering for them. However, we understand your feelings and revelations seeking support in the theory of Mauss's gift: the patient receives the gift (care), and imbued with a feeling of gratitude, the rewards in the form of compliments and courtesies. Precisely for this reason, we need to sharpen our sensitivity to deal about the human condition in all its vulnerability.