99 resultados para Estrutura eletronica - Simulação por computador
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The pumping through progressing cavities system has been more and more employed in the petroleum industry. This occurs because of its capacity of elevation of highly viscous oils or fluids with great concentration of sand or other solid particles. A Progressing Cavity Pump (PCP) consists, basically, of a rotor - a metallic device similar to an eccentric screw, and a stator - a steel tube internally covered by a double helix, which may be rigid or deformable/elastomeric. In general, it is submitted to a combination of well pressure with the pressure generated by the pumping process itself. In elastomeric PCPs, this combined effort compresses the stator and generates, or enlarges, the clearance existing between the rotor and the stator, thus reducing the closing effect between their cavities. Such opening of the sealing region produces what is known as fluid slip or slippage, reducing the efficiency of the PCP pumping system. Therefore, this research aims to develop a transient three-dimensional computational model that, based on single-lobe PCP kinematics, is able to simulate the fluid-structure interaction that occurs in the interior of metallic and elastomeric PCPs. The main goal is to evaluate the dynamic characteristics of PCP s efficiency based on detailed and instantaneous information of velocity, pressure and deformation fields in their interior. To reach these goals (development and use of the model), it was also necessary the development of a methodology for generation of dynamic, mobile and deformable, computational meshes representing fluid and structural regions of a PCP. This additional intermediary step has been characterized as the biggest challenge for the elaboration and running of the computational model due to the complex kinematic and critical geometry of this type of pump (different helix angles between rotor and stator as well as large length scale aspect ratios). The processes of dynamic generation of meshes and of simultaneous evaluation of the deformations suffered by the elastomer are fulfilled through subroutines written in Fortan 90 language that dynamically interact with the CFX/ANSYS fluid dynamic software. Since a structural elastic linear model is employed to evaluate elastomer deformations, it is not necessary to use any CAE package for structural analysis. However, an initial proposal for dynamic simulation using hyperelastic models through ANSYS software is also presented in this research. Validation of the results produced with the present methodology (mesh generation, flow simulation in metallic PCPs and simulation of fluid-structure interaction in elastomeric PCPs) is obtained through comparison with experimental results reported by the literature. It is expected that the development and application of such a computational model may provide better details of the dynamics of the flow within metallic and elastomeric PCPs, so that better control systems may be implemented in the artificial elevation area by PCP
Resumo:
This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.
Resumo:
In this thesis, it is developed the robustness and stability analysis of a variable structure model reference adaptive controller considering the presence of disturbances and unmodeled dynamics. The controller is applied to uncertain, monovariable, linear time-invariant plants with relative degree one, and its development is based on the indirect adaptive control. In the direct approach, well known in the literature, the switching laws are designed for the controller parameters. In the indirect one, they are designed for the plant parameters and, thus, the selection of the relays upper bounds becomes more intuitive, whereas they are related to physical parameters, which present uncertainties that can be known easier, such as resistances, capacitances, inertia moments and friction coefficients. Two versions for the controller algorithm with the stability analysis are presented. The global asymptotic stability with respect to a compact set is guaranteed for both cases. Simulation results under adverse operation conditions in order to verify the theoretical results and to show the performance and robustness of the proposed controller are showed. Moreover, for practical purposes, some simplifications on the original algorithm are developed
Resumo:
Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented
Resumo:
In this work we elaborate and discuss a Complex Network model which presents connectivity scale free probability distribution (power-law degree distribution). In order to do that, we modify the rule of the preferential attachment of the Bianconi-Barabasi model, including a factor which represents the similarity of the sites. The term that corresponds to this similarity is called the affinity, and is obtained by the modulus of the difference between the fitness (or quality) of the sites. This variation in the preferential attachment generates very interesting results, by instance the time evolution of the connectivity, which follows a power-law distribution ki / ( t t0 )fi, where fi indicates the rate to the site gain connections. Certainly this depends on the affinity with other sites. Besides, we will show by numerical simulations results for the average path length and for the clustering coefficient
Resumo:
Retaining walls design involves factors such as plastification, loading and unloading, pre-stressing, excessive displacements and earth and water thrust. Furthermore, the interaction between the retained soil and the structure is rather complex and hard to predict. Despite the advances in numerical simulation techniques and monitoring of forces and displacements with field instrumentation, design projects are still based on classical methods, whose simplifying assumptions may overestimate structural elements of the retaining wall. This dissertation involves a three-dimensional numerical study on the behavior of a retaining wall using the finite element method (FEM). The retaining wall structure is a contiguous bored pile wall with tie-back anchors. The numerical results were compared to data obtained from field instrumentation. The influence of the position of one or two layers of anchors and the effects of the construction of a slab bounded at the top of the retaining wall was evaluated. Furthermore, this study aimed at investigating the phenomenon of arching in the soil behind the wall. Arching was evaluated by analyzing the effects of pile spacing on horizontal stresses and displacements. Parametric analysis with one layers of anchors showed that the smallest horizontal displacements of the structure were achieved for between 0.3 and 0.5 times the excavation depth. Parametric analyses with two anchor layers showed that the smallest horizontal displacements were achieve for anchors positioned in depths of 0.4H and 0.7H. The construction of a slab at the top of the retaining wall decreased the horizontal displacements by 0.14% times the excavation depth as compared to analyses without the slab. With regard to the arching , analyzes showed an optimal range of spacing between the faces of the piles between 0.4 and 0.6 times the diameter of the pile
Resumo:
This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.
Resumo:
SILVA, Dany Geraldo Kramer Cavalcanti e et al. Lixo hospitalar: na estrutura curricular de cursos superiores de saude na cidade de Imperatriz-MA. Educação Ambiental em Ação, v. 27, p. 00-10, 2009.
Resumo:
LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.
Resumo:
This study approaches bureaucratic organizational structures with the aim to understand the adherence procedure to virtual technologies in the stricto sensu educational administrative process. Thus, the author navigates through the formation of these organizations in Brazil with the intent to demonstrate the bureaucratic organizational culture and the consequent form of domination of those who detain power. In this epistemological construction, the author explores the culture s bureaucratic environment and the organizational power. In the analyses, it was observed the technological phenomenon in the ODL s administrative environment, which can explain the adherence procedure to structures and technological instruments for stricto sensu courses that, hypothetically, dilutes the traditional inherited organizational axiom. Therefore, it was utilized as object of study the Professional Master s degree in National Scale Public Administration PROFIAP, hence analyzing the documental content and the legislation related to institutionalization as well as the positioning of professors/coordinators and of the director of CAPES/MEC. Considering this axioms, it was concluded that the bureaucratic structures can admit ODL in the stricto sensu s environment. However, this can only be done as long as the adherence does not imply in a dilution of the traditional forms of power and institutional bureaucratic inherited dominance, as well as the alleged hegemony of the governmental structure in the educational administration adopted in person by the stricto sensu courses in Brazil
Resumo:
When a company desires to invest in a project, it must obtain resources needed to make the investment. The alternatives are using firm s internal resources or obtain external resources through contracts of debt and issuance of shares. Decisions involving the composition of internal resources, debt and shares in the total resources used to finance the activities of a company related to the choice of its capital structure. Although there are studies in the area of finance on the debt determinants of firms, the issue of capital structure is still controversial. This work sought to identify the predominant factors that determine the capital structure of Brazilian share capital, non-financial firms. This work was used a quantitative approach, with application of the statistical technique of multiple linear regression on data in panel. Estimates were made by the method of ordinary least squares with model of fixed effects. About 116 companies were selected to participate in this research. The period considered is from 2003 to 2007. The variables and hypotheses tested in this study were built based on theories of capital structure and in empirical researches. Results indicate that the variables, such as risk, size, and composition of assets and firms growth influence their indebtedness. The profitability variable was not relevant to the composition of indebtedness of the companies analyzed. However, analyzing only the long-term debt, comes to the conclusion that the relevant variables are the size of firms and, especially, the composition of its assets (tangibility).This sense, the smaller the size of the undertaking or the greater the representation of fixed assets in total assets, the greater its propensity to long-term debt. Furthermore, this research could not identify a predominant theory to explain the capital structure of Brazilian
Resumo:
This is a study concerning in the structure of non governmental organizations, based on the institutional theory. It aims to understand the relation among structure, social projects and environmental influences, analyzing if there is coherence with project social or expresses adaptation to the institutional pressures of the environment. It introduces as theoretical support for the themes, studies about institutional theory and social structure. The research is descriptive and exploratory; it also applies to a study of case, based on the technical procedures. From the research universe, that was compound by non governmental organizations from Natal, RN, Brasil, it was chosen the Casa Renascer, a non governmental organization that works with the combat to the violence and sexual exploration of children and teenagers. The data collection process employed includes documental research, observations and semi structured research devices, guided by the organizational process proposed by Serva (1996) and by the institutional theory. The collected data were qualitatively treated. The analysis was divided into three parts, following the research matters. The social project characterization demonstrated that the organization went by three main phases. The first one, characterized by focus in women and girls education and health; the second shows the emphasis on girls in social risk situation, with preventive approach; and the last one, characterized by victims assistance of violence and sexual exploration. From the analysis using the institutional theory mechanisms, the results showed that exists coherence between structure and environmental influences, but a weak coherence between structure and social projects. It indicates as main determinant of the structure, an aspect forgotten by the institutional theory, the power. It was observed the presence from normative, coercive and mimetic mechanisms, highlighting normative influences
Resumo:
This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts
Resumo:
This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools
Resumo:
This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity