A paisagem da Mata Atlântica do estado do Rio Grande do Norte: remanescentes, configuração espacial e disponibilidade de habitat

The Atlantic Forest in Rio Grande do Norte (RN) is included in Pernambuco biogeographic sub-region and it is composed by Semi-deciduous Forest, deciduous Forest, Mangrove and Restinga. We assessed the conservation status of Atlantic Forest in the RN through remnants mapping using high resolution satellite images and landscape ecology approaches. We evaluated if there is difference between the north and south coastal regions considering their natural a historical land use differences. We also assessed the influence of the small remnants on landscape cover and configuration. The proportion of the original biome area with remnants larger than 3 hectares is 15.60% for the official governmental limit and is 16.60% for the alternative limit (SNE, 2002). This remnants proportion varies between 0.56 and 46.52% in the hydrographic basins. 89.70% of the remnants are smaller than 50 hectares. Only 6.00% of the remnants are greater than 100 hectares, and these remnants are responsible by 65% of remaining area. The patches with smaller area influence all calculated metrics. The south coastal hydrographic basins have higher percentage of coverage of remnants, larger patch densities and fragments with larger areas than north coastal hydrographic basins. The diffuse drainage basins of the southern coastal have the highest percentage of coverage with remnants. 18.28% and 10% of the biome area are protected by reserves, according to the official governmental and alternative limits respectively. The reserves are mainly of sustainable use (IUCN V-VI). Therefore, the Atlantic Forest in Rio Grande do Norte is in critical situation, with low proportion of remaining area and high fragmentation level. It’s indispensable to biome conservation keep all the remaining area, especially the large remnants, and restore areas to increase remnants proportion and to increase landscape connectivity

Controle inteligente de pressão para uma rede sem reservatório de abastecimento urbano de água

The sanitation companies from Brazil has a great challenge for the XXI century: seek to mitigate the rate of physical waste (water, chemicals and electricity) and financial waste caused by inefficient operating systems drinking water supply, considering that currently we already face, in some cases, the scarcity of water resources. The supply systems are increasingly complex as they seek to minimize waste and at the same time better serve the growing number of users. However, this technological change is to reduce the complexity of the challenges posed by the need to include users with higher quality and efficiency in services. A major challenge for companies of water supplies is to provide a good quality service contemplating reducing expenditure on electricity. In this situation we developed a research by a method that seeks to control the pressure of the distribution systems that do not have the tank in your setup and the water comes out of the well directly to the distribution system. The method of pressure control (intelligent control) uses fuzzy logic to eliminate the waste of electricity and the leaks from the production of pumps that inject directly into the distribution system, which causes waste of energy when the consumption of households is reduced causing the saturation of the distribution system. This study was conducted at Green Club II condominium, located in the city of Parnamirim, state of Rio Grande do Norte, in order to study the pressure behavior of the output of the pump that injects water directly into the distribution system. The study was only possible because of the need we had to find a solution to some leaks in the existing distribution system and the extensions of the respective condominium residences, which sparked interest in developing a job in order to carry out the experiments contained in this research

Estudo de tensoativos na organofilização de argila bentonítica para uso em fluido de perfuração à base de óleo

Due to the great challenges encountered in drilling wells, there is a need to develop fluids with appropriated properties and able to meet all the requirements of drilling operations. The physicochemical and rheological properties must be carefully controlled so that a fluid can exercise all its functions. In perforations sensitive to contact with water and "offshore", it becomes necessary the use of oil based drilling fluids, but the bentonite clay cannot be used without a previous surface modification so that their surfaces become hydrophobic. Lately, the oil companies in Brazil use imported organoclays in the preparation of oil-based drilling fluids. The study aimed to modify a calcium clay to increase the affinity of the same organic phase of oil-based drilling fluids, applying three surfactants (OCS, CTAB and UTM 150) at different concentrations. The results indicated that the surfactants UTM 150 and CTAB showed better results compared to OCS. Considering the type of surfactant and concentration as variables used in the statistical analysis, the results indicated that only the surface tension and concentration of calcium oxide in response to organophilization process showed statistically significant effects. The organophilizated clay has potential for application in oil-based drilling fluids.

Burocracia e comércio exterior: os desafios à exportação sob a ótica das micro e pequenas empresas exportadoras do rio grande do norte

As micro e pequenas empresas, ao mesmo tempo em que exercem um papel extremamente relevante na estrutura produtiva da economia brasileira pelo grande número de empreendedores existentes e expressivo volume de pessoal ocupado, perdem competitividade ao se deparar com entraves ao seu desenvolvimento, sejam eles em âmbito gerencial, financeiro, burocrático ou estrutural. Com base nesse contexto, o estudo procura identificar em que medida, na percepção das MPEs exportadoras do Rio Grande do Norte, as exigências burocráticas do processo exportador afetam o seu desempenho no comércio exterior. Como exigências burocráticas compreende-se o conjunto de normas, regras e procedimentos e documentos que disciplinam o processo exportador, enquanto desempenho é entendido como os resultados da atividade econômica medido através do crescimento das vendas para o mercado externo; das demandas de produtos exportados não atendidas e da ampliação do mercado internacional. A pesquisa realizada é de caráter censitário, desenvolvida junto a quatorze MPEs do estado, atuantes regularmente no comércio exterior nos últimos três anos (2009-2011), utilizando aplicação de questionário, assim como uma consulta a dados secundários disponíveis. A análise dos dados levantados revelou que, efetivamente, na percepção dos respondentes, fatores externos como o custo do processo de exportação, falta de incentivo do governo, excesso de controle dos órgãos públicos e a infraestrutura logística do estado exercem influência na pequena participação das MPEs nas exportações do Brasil e do Nordeste, enquanto o bom desempenho exportador destas relaciona-se a fatores gerenciais, com destaque para investimentos na estrutura organizacional da empresa, conhecimento do mercado internacional e bom relacionamento com clientes e mercados

Fatores de sucesso no desenvolvimento de novos produtos em pequenas empresas: um estudo de caso em um fabricante de equipamentos para gás natural veicular

This study presents itself as a contribution to the solidification of the Natural Gas industry, within the scope of the development of new products. The goal of this paper is to analyze the factors that lead to the success of new products through the evaluation of the activities done during the process of development of these products in the Natural Gas sector. To achieve this goal a case study was done in a small company of this segment. At first, as a basis for the study, a bibliographical research was done with books, theses, dissertations, monographies, publications in national and international periodicals, congress annals and publications in the internet related to the subject. Afterwards, a case study was done, aiming at the acquisition of further knowledge about the real process of development of products in a small company of the Natural Gas sector, allowing for the performance of the evaluation. The case study was done at Gas Project and Systems do Brasil, a company that works with the development of electronic equipment to the conversion of car engines to natural gas, through direct observations and interviews with the person responsible for the development and management of products. Through the evaluation of the process it was observed that the activities related to it are done in an informal way and some activities are considered unnecessary for their success. The results also suggest an emphasis in the technological activities, something that was not observed in the activities related to the market. The instruments used in this evaluation prove to be efficient to evaluate the process of development of new products in other companies, including those of different areas. Taking into account the relevance of the studied theme to the strengthening of the Natural Gas industry, it is necessary to do further complementary studies

Análise dos custos assistenciais de uma operadora de plano de saúde no Brasil

The relevance of rising healthcare costs is a main topic in complementary health companies in Brazil. In 2011, these expenses consumed more than 80% of the monthly health insurance in Brazil. Considering the administrative costs, it is observed that the companies operating in this market work, on average, at the threshold between profit and loss. This paper presents results after an investigation of the welfare costs of a health plan company in Brazil. It was based on the KDD process and explorative Data Mining. A diversity of results is presented, such as data summarization, providing compact descriptions of the data, revealing common features and intrinsic observations. Among the key findings was observed that a small portion of the population is responsible for the most demanding of resources devoted to health care

Avaliação da eficiência dos investimentos do programa Inova-RN em micro e pequenas empresas Uma integração da análise envoltória de dados e índice Malmquist

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

A imagem do Brasil na mídia impressa portuguesa: um estudo do caso diário de notícias e público

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação econômica dos incentivos fiscais e financeiros: uma análise das empresas industriais têxteis localizadas no Rio Grande do Norte, no período de 1999 a 2003

This study has as main objective to verify the effect of the tax and financial incentives granted by the brazilian states, specially in the reduction of ICMS on the investment decision of the entities, which in the last years led to the companies to decide new projects in based on the region that presented the better infrastructure beyond lesser tributary expense. For in such was made an economic valuation of the companies with focus in the beneficiary s optics using an adaptation of the Discounted Cash Flow method to measure the impact of the tax incentives in the value of the companies, this study selected the textile industry segment located in the State of Rio Grande do Norte, Brazil. The results indicated that such incentives created addition in the value of the companies, however the inexistence of incentives would not be enough to a negative decision of investment in the Rio Grande do Norte. The smallest difference between the value with and without incentive observed was 8.9%, and the biggest 31.7%, and the average of value aggregation with the tax incentives represented 18.9%

Geologia, Geocronologia, Geoquímica e Petrogênese das Rochas Ígneas Cretácicas da Província Magmática do Cabo e suas Relações com as Unidades Sedimentares da Bacia de Pernambuco (NE do Brasil)

The area studied forms a thin NNE-directed belt situated south of Recife town (Pernambuco state), northeastern Brazil. Geologically, it comprises the Pernambuco Basin (PB), which is limited by the Pernambuco Lineament to the north, the Maragogi high to the south and the Pernambuco Alagoas massif to the west, all of them with Precambrian age. This thesis reports the results obtained for the Cabo Magmatic Province (CMP), aiming the characterization of the geology, stratigraphy, geochronology, geochemistry and petrogenesis of the Cretaceous igneous rocks presented in the PB. The PB is composed of the Cabo Formation (rift phase) at the base (polymictic conglomerates, sandstones, shales), an intermediate unit, the Estiva Formation (marbles and argillites), and, at the top, the Algodoais Formation (monomictic conglomerates, sandstones, shales). The CMP is represented by trachytes, rhyolites, pyroclastics (ignimbrites), basalts / trachy-andesites, monzonites and alkali-feldspar granite, which occur as dykes, flows, sills, laccoliths and plugs. Field observations and well descriptions show that the majority of the magmatic rocks have intrusive contacts with the Cabo Formation, although some occurrences are also suggestive of synchronism between volcanism and siliciclastic sedimentation. 40Ar/39Ar and zircon fission tracks for the magmatic rocks indicate an average age of 102 r 1 Ma for the CMP. This age represents an expressive event in the province and is detected in all igneous dated materials. It is considered as a minimum age (Albian) for the magmatic episode and the peak of the rift phase in the PB. The 40Ar/39Ar dates are about 10-14 Ma younger than published palynologic ages for this basin. Geochemically, the CMP may be divided in two major groups; i) a transitional to alkaline suite, constituted by basalts to trachy-andesites (types with fine-grained textures and phenocrysts of sanidine and plagioclase), trachytes (porphyrytic texture, with phenocrysts of sanidine and plagioclase) and monzonites; ii) a alkaline suite, highly fractionated, acidic volcano-plutonic association, formed by four subtypes (pyroclastic flows ignimbrites, fine-to medium-grained rhyolites, a high level granite, and later rhyolites). These four types are distinguished essentially by field aspects and petrographic and textural features. Compatible versus incompatible trace element concentrations and geochemical modeling based on both major and trace elements suggest the evolution through low pressure fractional crystallization for trachytes and other acidic rocks, whereas basalts / trachy-andesites and monzonites evolved by partial melting from a mantle source. Sr and Nd isotopes reveal two distinct sources for the rocks of the CMP. Concerning the acidic ones, the high initial Sr ratios (ISr = 0.7064-1.2295) and the negative HNd (-0.43 to -3.67) indicate a crustal source with mesoproterozoic model ages (TDM from 0.92 to 1.04 Ga). On the other hand, the basic to intermediate rocks have low ISr (0.7031-0.7042) and positive HNd (+1.28 to +1.98), which requires the depleted mantle as the most probable source; their model ages are in the range 0.61-0.66 Ga. However, the light rare earth enrichment of these rocks and partial melting modeling point to an incompatible-enriched lherzolitic mantle with very low quantity of garnet (1-3%). This apparent difference between geochemical and Nd isotopes may be resolved by assuming that the metasomatizing agent did not obliterate the original isotopic characteristics of the magmas. A 2 to 5% partial melting of this mantle at approximately 14 kbar and 1269oC account very well the basalts and trachy-andesites studied. By using these pressure and temperatures estimates for the generation of the basaltic to trachy-andesitic magma, it is determined a lithospheric stretching (E) of 2.5. This E value is an appropriated estimate for the sub-crustal stretching (astenospheric or the base of the lithosphere?) region under the Pernambuco Basin, the crustal stretching probably being lower. The integration of all data obtained in this thesis permits to interpret the magmatic evolution of the PB as follows; 1st) the partial melting of a garnet-bearing lherzolite generates incompatible-enriched basaltic, trachy-andesitic and monzonitic magmas; 2nd) the underplating of these basaltic magmas at the base of the continental crust triggers the partial melting of this crust, and thus originating the acidic magmas; 3rd) concomitantly with the previous stage, trachytic magmas were produced by fractionation from a monzonitic to trachy-andesitic liquid; 4th) the emplacement of the several magmas in superficial (e.g. flows) or sub-superficial (e.g. dykes, sills, domes, laccoliths) depths was almost synchronically, at about 102 r 1 Ma, and usually crosscutting the sedimentary rocks of the Cabo Formation. The presence of garnet in the lherzolitic mantle does not agree with pressures of about 14 kbar for the generation of the basaltic magma, as calculated based on chemical parameters. This can be resolved by admitting the astenospheric uplifting under the rift, which would place deep and hot material (mantle plume?) at sub-crustal depths. The generation of the magmas and their subsequent emplacement would be coupled with the crustal rifting of the PB, the border (NNE-SSW directed) and transfer (NW-SE directed) faults serving as conduits for the magma emplacement. Based on the E parameter and the integration of 40Ar/39Ar and palynologic data it is interpreted a maximum duration of 10-14 Ma for the rift phase (Cabo Formation clastic sedimentation and basic to acidic magmatism) of the PB

A mineração artesanal e de pequena escala em pegmatitos e cerâmica no município de Parelhas, região do Seridó/Rio Grande do Norte

The working conditions, occupational health, occupational illness and workers quality of life, usually referring to the artisanal activities and the workers with a poor professional support. Because this reality is still present in locals without good infrastructure of social and economic attention, there is a need for a broad knowledge of problems related to the productive processes that include features of unsanitary and unhealthy. Despite the intense process of industrialization promoted by globalization and the growth of developing nations like Brazil, the activities of artisanal and small-scale mining are still suffering from the marginalization of their production processes and their workers. This dissertation deals with the description of mineral-based activities (MBA), especially the activities related to production processes of extraction and processing of red pottery and minerals in pegmatites in Parelhas city, Seridó, Rio Grande do Norte, which are conducted by small mining companies or artisanal miners. The study of the work process was based on direct observation, photographic documentation, ergonomics, health and occupational safety analysis, interviews and structured questionnaire with workers of the two activities. The results indicate the need for improvement in both workplaces (red pottery and pegmatites), adaptation of workers to safety standards specific to the workplace, more attention and care related to ergonomics and occupational safety, greater importance to economic and social relations among performed activities, workers and firms of mineral branch and better and greater integration of social policies, supported by different sectors of society with the intention of transforming the current social, cultural, labor and education situation

analise da dispersao de ondas de superficie na provincia borborema, Nordeste do Brasil

The Borborema Province, Northeastern Brazil, had its internal structure investigated by different geophysical methods like gravity, magnetics and seismics. Additionally, many geological studies were also carried out to define the structural domains of this province. Despite the plethora of studies, there are still many important open aspects about its evolution. Here, we study the velocity structure of S-wave in the crust using dispersion of surface waves. The dispersion of surface waves allows an estimate of the average thickness of the crust across the region between the stations. The inversion of the velocity structure was carried out using the inter-station dispersion of surface waves of Rayleigh and Love types. The teleseismic events are mainly from the edges of the South and North American plates. The period of data collection occurred between 2007 and 2010 and we selected 7 events with magnitude above 5.0 MW and up to 40 km depth. The difference between the events back-azimuths and the interstation path was not greater than 10. We also know the depth of the Moho, results from Receiver Functions (Novo Barbosa, 2008), and use those as constrains in inversion. Even using different parameterizations of models for the inversion, our results were very similar the mean profiles velocity structure of S-wave. In pairs of stations located in the Cear´a Central Domain Borborema the province, there are ranges of depths for which the velocities of S are very close. Most of the results in the profile near the Moho complicate their interpretation at that depth, coinciding with the geology of the region, where there are many shear zones. In particular, the profile that have the route Potiguar Bacia in inter-station, had low velocities in the crust. We combine these results to the results of gravimetry and magnetometry (Oliveira, 2008) and receptor function (Novo Barbosa, 2008). We finally, the first results on the behavior of the velocity structure of S-wave with depth in the Province Borborema

Burocracia e comércio exterior: os desafios à exportação sob a ótica das micro e pequenas empresas exportadoras do Rio Grande do Norte

As micro e pequenas empresas, ao mesmo tempo em que exercem um papel extremamente relevante na estrutura produtiva da economia brasileira pelo grande número de empreendedores existentes e expressivo volume de pessoal ocupado, perdem competitividade ao se deparar com entraves ao seu desenvolvimento, sejam eles em âmbito gerencial, financeiro, burocrático ou estrutural. Com base nesse contexto, o estudo procura identificar em que medida, na percepção das MPEs exportadoras do Rio Grande do Norte, as exigências burocráticas do processo exportador afetam o seu desempenho no comércio exterior. Como exigências burocráticas compreende-se o conjunto de normas, regras e procedimentos e documentos que disciplinam o processo exportador, enquanto desempenho é entendido como os resultados da atividade econômica medido através do crescimento das vendas para o mercado externo; das demandas de produtos exportados não atendidas e da ampliação do mercado internacional. A pesquisa realizada é de caráter censitário, desenvolvida junto a quatorze MPEs do estado, atuantes regularmente no comércio exterior nos últimos três anos (2009-2011), utilizando aplicação de questionário, assim como uma consulta a dados secundários disponíveis. A análise dos dados levantados revelou que, efetivamente, na percepção dos respondentes, fatores externos como o custo do processo de exportação, falta de incentivo do governo, excesso de controle dos órgãos públicos e a infraestrutura logística do estado exercem influência na pequena participação das MPEs nas exportações do Brasil e do Nordeste, enquanto o bom desempenho exportador destas relaciona-se a fatores gerenciais, com destaque para investimentos na estrutura organizacional da empresa, conhecimento do mercado internacional e bom relacionamento com clientes e mercados