Desenvolvimento de pastas cimentantes utilizando cimentos portland compostos para cimentação de poços petrolíferos

The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing

Enfermagem na atenção primária em saúde no screening de adolescentes com excesso de peso

One of the Primary Health Care strategies for adolescent health is the growth and development follow-up and the early detection of overweight adolescents. Even though the School Health Program in Brazil proposes to evaluate the nutritional state of the school population in the corresponding community health units, not all cities have adhered to the Program and many nurses do not recognize overweight as a problem in their territory. The objective of the study was to identify the nurse´s participation in the screening of overweight adolescent students in their work territory. Cross sectional study conducted in eight state supported schools of the municipality of Natal/RN and in four Primary Health Units. The total student population was 27.277. A stratified sample was statistically calculated based on the student population of the four city geographical zones: 112 North , 74 West; 108 East; and 78 South, totalizing 372 adolescents. The students were selected by a probability process where eight schools were first selected, two per district, until the number per subsample in each district was reached. Four primary health nurses, responsible for the health units were included. Two instruments were used for data collection, a screening questionnaire and a semi-structured interview form for questioning of the nurses. The content of both instruments was validated. Anthropometric and health data were collected from the students and analyzed with descriptive and analytical statistics. Interview data were transcribed and submitted to content analysis. The nursing diagnosis of overweight was identified in 50 (13,5%) of the adolescents and its association with consumption of foods that have cardiovascular risk (canned foods, pasta and fried food). An association of the nursing diagnosis was identified with family history (diabetes, hypertension, obesity, and kidney disease). The nurses judged that care of overweight adolescents was important but noted difficulties because of the absence of this population in the health units, because of their work overload, and the lack of school articulation. The nurses do not have impacting actions with this population and delegate the responsibility to other professionals. It is concluded that overweight is a nutritional problem relevant to the adolescent school population in Natal/RN, with a 13,5% prevalence and that it is related to food consumption with cardiovascular risk and family health history. The nurses consider overweight as an important public health problem but do not envision ways to maintain linkage with adolescents and with the school to promote the needed care

Modelagem e simulação da deposição de parafinas em escoamento turbulento

The flow assurance has become one of the topics of greatest interest in the oil industry, mainly due to production and transportation of oil in regions with extreme temperature and pressure. In these operations the wax deposition is a commonly problem in flow of paraffinic oils, causing the rising costs of the process, due to increased energy cost of pumping, decreased production, increased pressure on the line and risk of blockage of the pipeline. In order to describe the behavior of the wax deposition phenomena in turbulent flow of paraffinic oils, under different operations conditions, in this work we developed a simulator with easy interface. For that we divided de work in four steps: (i) properties estimation (physical, thermals, of transport and thermodynamics) of n-alkanes and paraffinic mixtures by using correlations; (ii) obtainment of the solubility curve and determination the wax appearance temperature, by calculating the solid-liquid equilibrium of parafinnic systems; (iii) modelling wax deposition process, comprising momentum, mass and heat transfer; (iv) development of graphic interface in MATLAB® environment for to allow the understanding of simulation in different flow conditions as well as understand the matter of the variables (inlet temperature, external temperature, wax appearance temperature, oil composition, and time) on the behavior of the deposition process. The results showed that the simulator developed, called DepoSim, is able to calculate the profile of temperature, thickness of the deposit, and the amount of wax deposited in a simple and fast way, and also with consistent results and applicable to the operation

Avaliação da remoção catalítica de compostos orgânicos monoaromáticos em água utilizando materiais nanoestruturados de sílica

Statistics of environmental protection agencies show that the soil has been contaminated with problems often resulting from leaks, spills and accidents during exploration, refining, transportation and storage oil operations and its derivatives. These, gasoline noteworthy, verified by releasing, to get in touch with the groundwater, the compounds BTEX (benzene, toluene, ethylbenzene and xylenes), substances which are central nervous system depressants and causing leukemia. Among the processes used in remediation of soil and groundwater contaminated with organic pollutants, we highlight those that use hydrogen peroxide because they are characterized by the rapid generation of chemical species of high oxidation power, especially the hydroxyl radical ( OH), superoxide (O2 -) and peridroxil (HO2 ), among other reactive species that are capable of transforming or decomposing organic chemicals. The pH has a strong effect on the chemistry of hydrogen peroxide because the formation of different radicals directly depends on the pH of the medium. In this work, the materials MCM-41 and Co-MCM-41 were synthesized and used in the reaction of BTEX removal in aqueous media using H2O2. These materials were synthesized by the hydrothermal method and the techniques used to characterize were: XRD, TG/DTG, adsorption/desorption N2, TEM and X-Ray Fluorescence. The catalytic tests were for 5 h of reaction were carried out in reactors of 20 mL, which was accompanied by the decomposition of hydrogen peroxide by molecular absorption spectrophotometry in the UV-Vis, in addition to removal of organic compounds BTEX was performed as gas chromatography with detection photoionization and flame ionization and by static headspace sampler. The characterizations proved that the materials were successfully synthesized. The catalytic tests showed satisfactory results, and the reactions containing BTEX + Co-MCM-41 + H2O2 at pH = 12.0 had the highest percentages of removal for the compounds studied