Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Crescimento econômico e restrição externa: evidências empíricas na economia brasileira (1991-2010)

This study aims to investigate the influence of the balance of payments constrained on economic growth in Brazil from 1991 to 2010. With this order, are shown some of the Keynesian balance of payments constrained growth models, inspired by Thirlwall (1979) and Kaldor (1970), which are supported by important points in common, such as adherence to the principle of effective demand. Given that within this theoretical perspective, there is no consensus about the best model to explain the growth rate allowed by the balance of payments constraint, the results are presented by the representative of the empirical literature that addresses the topic, which are necessary for understand the Brazilian case. From the estimation of the income elasticity of imports (0.85) via autoregressive vectors with error correction (VEC), it was calculated five growth rates of income, as predicted by the models of Thirlwall (1979), Thirlwall and Hussain (1982), Moreno-Brid (1998, 2003) and Lourenço et al. (2011) and compared with the actual growth rate. The empirical analysis has shown that: it can not reject the presence of external constraint in the Brazilian economy, there is a strong similarity in growth rates provided by different modeling suggest that growth with external constraint. In addition, when using data in quarterly for the period after 1990 there are no factors that could cause instability in the parameters of the import function (income elasticity and price elasticity of imports) within the period, which indicates that the structural break widely associated with the year 1994 was not confirmed by this study

Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.

Tratamento de argila montmorilonítica para a produção de nanocompósitos poliméricos com retardo de propagação de chama

Compared to conventional composites, polymer matrix nanocomposites typically exhibit enhanced properties at a significantly lower filler volume fraction. Studies published in the literature indicate t hat the addition of nanosilicate s can increase the resistance to flame propagation in polymers. In this work, a treatment of montmorillonite (MMT) nano clay and the effect of its ad dition o n flame propagation characteristics of vinyl ester were studied. The resea rch was conducted in two stages. The first stage focused on the purification and activation of the MMT clay collected from a natural deposit to improve compatibility with the polymer matrix . Clay modification with sodium acetate was also studied to improve particle dispersion in the polymer. The second step was focused on the effect of the addition of the treated clay on nanocomposites ’ properties. Nanocomposites with clay con tents of 1, 2, 4 wt. % were processed. T he techniques for the characterization of the clay included X - ray fluorescence (XRF), X - r ay d iffraction (XRD), thermogravimetric a nalysis (TGA), d ifferential scanning c alorimetry (DSC) , s urface area (BET) and Fourier transform infrared spectroscopy (FTIR). For t he characterization of the nanocomposites , the techniques used were thermogravimetric a nalysis (TGA) , differential scanning c alorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) , scanning electron mi croscopy (SEM), transmission electron m icroscopy (TEM), and the determination of tensile strength, modulus of elasticity and resistance to flame propagation. According to the results, the purification and activation treatment with freeze - drying used in thi s work for the montmorillonite clay was efficient to promote compatibility and dispersion in the polymer matrix as evidenced by the characterization of the nanocomposite s . It was also observed that the clay modifica tion using sodium acetate did not produce any significant effect to improve compatibilization of the clay with the polymer. The addition of the treated MMT resulted in a reduction of up to 53% in the polymer flame propagation speed and did not affect the mechanical tensile strength and modulus o f elas ticity of the polymer, indicating compatibility between the clay and polymer. The effectiveness in reducing flame propagation speed peaked for nanocomposites with 2 wt. % clay, indicating that this is the optimum clay concentration for this property. T he clay treatment used in this work enables the production of vinylester matrix nanocomposites with flame - retardancy properties .

Serviço de nuvem pública e sua relação com os arranjos de governança de TI e o alinhamento estratégico

Increasingly, the Information Technology (IT) has been used to sustain the business strategies, causing increased its relevance. Therefore IT governance is seen as one of the priorities of organizations at the time. The search for strategic alignment between business and IT is debated as a factor for business success, but even with that importance, usually the main business managers are reluctant to take responsibility for decisions involving IT, mainly due to the complexity of your infrastructure. Since cloud computing is being seen as an element capable of assisting in the implementation of organizational strategies, because their characteristics enable greater efficiency and agility in IT, and is considered as a new computing paradigm. The main objective of the analyze the relationship between IT governance arrangements and strategic alignment with the infrastructure as a service (IaaS) of public cloud computing. Therefore, an exploratory, descriptive and inferential was developed, with approach to the problem of quantitatively research, with descriptive survey method and cross section. An electronic questionnaire that was applied to the ISACA chapters Associates of São Paulo and the Distrito Federal, totaling 164 respondents was used. The instrument used based on the theories of Weill and Ross (2006) for array of IT governance arrangement; Henderson and Venkatraman (1993) and Luftman (2000), for maturity of the strategic alignment model; and NIST (2011 b), ITGI (2007) and CSA (2010) for infrastructure maturity as a service (IaaS) public in its essential characteristics. As regards the main results, this research proved that with public IaaS decision-making structures have changed, with a greater participation of senior executives in all five key IT decisions (IT governance arrangement array) including more technical decisions as architecture and IT infrastructure. With increased participation of senior executives the decrease was also observed in the share of IT specialists, characterizing the decision process with the duopoly archetype (shared decision). With regard to strategic alignment, it was observed that it changes with cloud computing, and organizations with public IaaS, a maturity of strategic alignment with statistically significant and greater difference when compared to organizations without IaaS. The maturity of public IaaS is at the intermediate level (level 3 - "defined process"), with the elasticity and measurement achieved level 4 - "managed and measurable" It was also possible to infer in organizations with public IaaS, there are positive correlations between the key decisions and the maturity of IaaS, especially at the beginning, architecture and infrastructure, and the archetypes involving senior executives and IT specialists. In the correlation between the maturity and mature strategic alignment of public IaaS therefore the higher the strategic alignment, the greater the maturity of the public IaaS and vice versa.

Fabricação e caracterização de um compósito hibrido com resíduo lignocelulósico

This work aims to manufacture and characterize a hybrid plastic composite with the matrix isophthalic polyester resin base and having as reinforcing glass fiber and the dry endocarp of coconut (Coco nucifera Linn) in the form of particles as filler. The composite was made industrially in Tecniplas Industry and Trade LTDA. in the form of plate, and was manufactured process made by the manual lamination (Hand Lay Up). From the plate they were prepared test specimens for testing density, water absorption, uniaxial traction in dry and wet states, and testing of bending, as well as studies on the behavior of the generated fractures, macroscopic and microscopic, in mechanical tests through. All tests were performed in order to find the most viable applications the hybrid composite manufactured. The tensile and bending tests were analyzed last tensile properties, elasticity and deformation module. After the studies, it is observed that the percentage moisture absorbed was 3.03%. The presence of moisture in the tensile test meant a decrease of 19.77% from last stand, and 5.26% in the elastic modulus. For bending tests gave an average value of 69.13 MPa flexural strength. The results show the application of hybrid composite studied in lightweight structures, indoors, which require low / medium performance traction demands, and which involve flexural requests.

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures