Diagnóstico ambiental da gestão e destinação dos resíduos da construção e demolição (RCD): análise das Construtoras Associadas ao SINDUSCON/RN e empresas coletoras atuantes no município de Parnamirim - RN

Surveys carried out in many Brazilian cities have shown that the CDW Construction and Demolition Waste, in some cases, represent more than 50% of the mass of urban solid residue. Municipalities have struggled to manage in an effective way huge quantities of CDW generated every day and solve the problem of the illegal dumping in an inadequate area, which compromise the quality of life of the population as a whole, thus causing serious problems concerning social-environmental and sanitary. This paperwork was meant it carry out environmental diagnosis of the management and the final destination of the CDW in the city of Parnamirim/RN. The methodology used in this work constituted in the bibliographical research, conducted to give support and fundaments to the subject in question, identification of the main places of legal and illegal dumping, identification of the environmental impacts caused by the irregular deposition of the CDW, valuation of quantity and quality of the CDW and perception according to the Environmental Legislation. The necessary data for the elaboration of this study were carried out through the appliance of questionnaires with open and closed questions, applied to 14 (fourteen) Real Estate developer companies associated with SINDUSCON/RN and 05 companies that deal with the transportation and collection of CDW, formal and informal interviews, exploitational visits and photographical records. The collected data went through a statistic treatment being organized into tables and graphs. The main results obtained from this research show that the interviewees hold a medium knowledge of the specific Environmental Legislation; do not have an effective model of environmental management, resorting to only reusing CDW; that the reusing of CDW is not substantial, as much as the possibility of recycling has a minimal consideration. It was also verified that a considerable percentage of interviewees affirmed to send CDW to illegal and inadequate locations. It is expected that such study can be used as an important tool to subsidize the public administration in the pursuit of solutions which could bring benefits to society and the environment

A Influência da observabilidade e da visualização radial no projeto de sistemas de monitoramento de redes de computadores

Este trabalho apresenta um levantamento dos problemas associados à influência da observabilidade e da visualização radial no projeto de sistemas de monitoramento para redes de grande magnitude e complexidade. Além disso, se propõe a apresentar soluções para parte desses problemas. Através da utilização da Teoria de Redes Complexas, são abordadas duas questões: (i) a localização e a quantidade de nós necessários para garantir uma aquisição de dados capaz de representar o estado da rede de forma efetiva e (ii) a elaboração de um modelo de visualização das informações da rede capaz de ampliar a capacidade de inferência e de entendimento de suas propriedades. A tese estabelece limites teóricos a estas questões e apresenta um estudo sobre a complexidade do monitoramento eficaz, eficiente e escalável de redes

Uso de replicação móvel para distribuição de vídeo digital em redes de computadores

A maioria da soluções apresentadas como candidatas à implementação de serviços de distribuição de áudio e vídeo, têm sido projetadas levando-se em consideração determinadas condições de infra-estrutura, formato dos fluxos de vídeo a serem transmitidos, ou ainda os tipos de clientes que serão atendidos pelo serviço. Aplicações que utilizam serviços de distribuição de vídeo normalmente precisam lidar com grandes oscilações na demanda pelo serviço devido a entrada e saída de usuários do serviço. Com exemplo, basta observar a enorme variação nos níveis de audiência de programas de televisão. Este comportamento coloca um importante requisito para esta classe de sistemas distribuídos: a capacidade de reconfiguração como conseqüência de variações na demanda. Esta dissertação apresenta um estudo que envolveu o uso de agentes móveis para implementar os servidores de um serviço de distribuição de vídeo denominada DynaVideo. Uma das principais características deste serviço é a capacidade de ajustar sua configuração em conseqüência de variações na demanda. Como os servidores DynaVideo podem replicar-se e são implementados como código móvel, seu posicionamento pode ser otimizado para atender uma dada demanda e, como conseqüência, a configuração do serviço pode ser ajustada para minimizar o consumo de recursos necessários para distribuir vídeo para seus usuários. A principal contribuição desta dissertação foi provar a viabilidade do conceito de servidores implementados como agentes móveis Java baseados no ambiente de desenvolvimento de software Aglet.

Caracterização e separação física de placas de circuito impresso de computadores obsoletos

The unbridled consumption of electronic equipment associated with fast immersion of new technologies on the market leads to the accelerated growth of electronic waste. Such waste mostly contains printed circuit boards in its structure. Printed circuit boards have many metals, including heavy metals, being highly toxic. Electronic waste is discarded improperly and indiscriminately, usually without any previous treatment and with other municipal waste, contaminating the environment and causing serious problems to human health. Beyond these metals, there are also precious metals and high value-added basis, that can be recovered and recycled, reducing the exploration of natural resources. Thus, due to the high growth potential and reuse of these waste treatment processes, characterization and separation were applied to the printed circuit boards. The printed circuit boards were subjected to physical treatments such as dismantling, crushing, sizing separation, magnetic separation and chemical treatments such as pyrolysis and leaching. Through characterization process (pyrolysis and leaching) the proportions of the components of the granulometric range were determined: 46,08% of metals; 23,32% of polymers and 30,60% of ceramics. It was also observed by particle size separation that metal components tend to concentrate in coarse fractions, while polymeric and ceramic components in fine fractions. From the magnetic separation process was obtained 12,08% of magnetic material and 82,33% of non-magnetic material.

Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo

BRITTO, Ricardo S.; MEDEIROS, Adelardo A. D.; ALSINA, Pablo J. Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo. In: SIMPÓSIO BRASILEIRO DE AUTOMAÇÃO INTELIGENTE,8., 2007, Florianópolis. Anais... Florianópolis: SBAI, 2007.

As bibliotecas escolares digitais constituídas através de uma rede de conhecimento digital

BEZERRA, Gesiane Ferreira; CÂMARA, Rafael Silva da; SANTOS, Valdete Honorato dos et al. As bibliotecas escolares digitais contituídas através de uma rede de conhecimento digital. In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIENCIAS SOCIAIS APLICADAS, 16, 2010. Natal. Anais eletrônicos... Natal: SEMINÁRIO CCSA, 2010. Trabalho oral. Disponível em:. Acesso em: 25 nov. 2011.

Gestão Social em Empreendimentos Econômicos Solidários: uma abordagem no Oeste Potiguar

The central research question was to search for data to ratify the theory and discourse of the so-called practitioners of economic solidarity, by defending the substantive rationality should guide the principles of economic solidary, designing the space economy incidental and not the primacy of relations in determining social as well, reflecting the predominance of dimensions of social management in administrative practices of ESS's. For both analyzed the theoretical dimensions of social management - sociopolitical, economic, organizational and environmental - manifested in organizational practices supportive of economic organization Potiguar West. For the success of the research realized the triangulation involving a combination of quantitative and qualitative methodological approaches. At first the research will use a quantitative approach, from the cluster analysis, to verify the behavior of the sample chosen for this study. In the second stage of the qualitative study was carried out focus group technique (FLICK, 2002) for further analysis of the dimensions of social management on organizational practices supportive of economic organization, related to the principles of Solidary Economy, established in a quantitative approach. In quantitative analysis, the socio-political dimension, it was clear that the more equity instruments of internal and external, from the purposeful living in public spaces, the best monetary results. Another point worth stressing concerns the economic dimension, with the practice reciprocity prevailing in market. Thus, the qualitative approach was possible to understand the processes of exchange of product or service. Rural enterprises surveyed in the allocation of the agro-ecological products have the following scale of priority, sequentially: self-consumption (domestic), market and exchange. The research leads to the fact that training and practices that enhance the socio-political dimension (knowledge, empowerment, sense of belonging) become the guiding principle for the strengthening of the social management in the context of other dimensions, leading to gains sociopolitical, economic, organizational and environmental. Despite the weaknesses found in the organizational dimension and environment, both in a quantitative as in qualitative, we determined that the practices of ESS's Potiguar West incorporate predominantly elements of social management and economic solidarity, with a preponderance of substantive rationality in the primacy of the instrumental. Finally, research has brought information that the participants of the ESS's do not give the money economy primacy in determining social relations, which in turn leads to the confirmation that, in practice the solidarity economy, prevailing the dominance of substantive rationality, as a guide for organizational practices

Práticas da ti verde que contribuem para o desenvolvimento sustentável: um estudo de caso em indústrias do RN

This dissertation aims to describe the practices of Information Technology Green contributing to sustainable development, in computers and textile industries in the state of Rio Grande do Norte. The goal is to understand the importance and contribution of IT Green for sustainable development. The research methodology used involved a survey of the theoretical approach prepared, involving two case studies in industries of Rio Grande do Norte. The analysis was supported by an analysis of content, which allowed the understanding of the phenomenon of the Information Technology Green sustainable development in the case studies. In conclusion, is that the Green Information Technology contributes to sustainable development, even so through incipient aspects that highlight the competitive business with a focus on cost reduction, and efforts in sustainable practices

Práticas de letramento digital de professores em formação: demandas, saberes e impactos

Over the last decades, the digital inclusion public policies have significantly invested in the purchase of hardwares and softwares in order to offer technology to the Brazilian public teaching institutions, specifically computers and broadband Internet. However, the teachers education to handle these artefacts is put away, even though there is some demand from the information society. With that, this dissertation chooses as an object of study the digital literacy practices performed by 38 (thirty-eight) teachers in initial and continuous education by means of the extension course Literacies and technologies: portuguese language teaching and cyberculture demands. In this direction, we aim at investigating the digital literacy practices of developing teachers in three specific moments: before, while and after this extension action with the intent to (i) delineate the digital literacy practices performed by the collaborators before the formative action; (ii) to narrate the literacy events made possible by the extension course; (iii) to investigate the contributions of the education course to the collaborators teaching practice. We sought theoretical contributions in the literacy studies (BAYNHAM, 1995; KLEIMAN, 1995; HAMILTON; BARTON; IVANIC, 2000), specifically when it comes to digital literacy (COPE, KALANTZIS, 2000; BUZATO, 2001, 2007, 2009; SNYDER, 2002, 2008; LANKSHEAR & KNOBEL, 2002, 2008) and teacher education (PERRENOUD, 2000; SILVA, 2001). Methodologically, this virtual ethnography study (KOZINETS, 1997; HINE, 2000) is inserted into the field of Applied Linguistics and adopts a quali-quantitative research approach (NUNAN, 1992; DÖRNYEI, 2006). The data analysis permitted to evidentiate that (i) before the course, the digital literacy practices focused on the personal and academic dimensions of their realities at the expense of the professional dimension; (ii) during the extension action, the teachers collaboratively took part in the hybrid study sessions, which had a pedagogical focus on the use of ICTs, accomplishing the use of digital literacy practices - unknown before that; (iii) after the course, the attitude of the collaborator teachers concerning the use of ICTs on their regular professional basis had changed, once those teachers started to effectively make use of them, promoting social visibility to what was produced in the school. We also observed that teachers in initial education acted as more experienced peers in collaborative learning process, offering support scaffolding (VYGOTSKY, 1978; BRUNER, 1985) to teachers in continuous education. This occurred because of the undergraduates actualize digital literacy practices were more sophisticated, besides the fact being integrate generation Y (PRENSKY, 2001)

Terrenos de marinha: terras públicas com função social? um estudo da orla marítima de natal

This work has as its theme the social function of terrenos de marinha. Theresearch universe is the terrenos de marinha of Natal coastline, focusing on thefulfillment of its social function. Prescribed by law since the colonial period with thepurpose of protecting the coast and free movement of people and goods, theywere swathes of land not available to private use by individuals. With the transitionfrom the allotments system to the purchase and sale, regard to land access,crystallized with the creation of the Land Law in the nineteenth century, the land isheld as merchandise and terrenos de marinha, following this logic, also acquireexchange value and become capable of enjoyment by private individuals, with thecondition of tax payments to the state. This is seen until the twentieth century,when in 1988, primarily because of the Federal Constitution promulgation, begins anew cycle when is possible to use on terrenos de marinha the principle of thesocial function of property. From this perspective this study aims to identify thesocial function of terrenos de marinha in Natal, focusing on the public destinationand the use value of the city coastline. To this end, it was made a data collection inthe on-line information system of the Federal Heritage Department of Rio Grandedo Norte (SPU / RN) and in the terrenos de marinha areas, in order to find out ifthey had public or private use, or if they were empty lots, as well as if thepopulation access to the shore exist. Interviews with managers of the SPU weremade. The empirical study showed that the social function of terrenos de marinhain the city of Natal still didn´t happen, considering the constant existence of vacantlots in their areas, the lack of access in significant portions of the coastline and thereduced areas directed to common use along the coastline, minimizing its potentialof enjoyment by the population. It concludes by pointing to the existence of a newtransition phase on the terrenos de marinha, in witch, gradually, come up lawprovisions in the legal system and public policies to expand the purely taxcollection function attributed to this land for two centuries. In this direction, thesocial function of terrenos de marinha is embodied in concomitant adjustment ofthe tax collection function and the rescue of coastline use value, national heritageand a place for sociability and social relations development

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Formulação de massas cerâmicas para porcelanas elétricas utilizando resíduos oriundos de corpos de fusíveis

The power industry generates as waste ceramic bodies of electrical fuses that are discarded after use. The formulation of ceramic bodies for porcelain electrical insulators using waste from the bodies fuse allocation promotes environmentally appropriate, through the reuse of the material. This work evaluated the technical feasibility of using waste for use in electrical porcelains with formulations containing the residue, feldspar and kaolinite. The raw materials were processed through grinding and sieving to 200 mesh. The ceramic material obtained from the proposed formulations with 25%, 30%, 34% and 40% of the residue went through a vibratory mill for grinding and homogenization, and then were sieved at 325 mesh. The samples were shaped in a uniaxial press, with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45 minutes. Were also developed bodies of evidence with reference formulations obtained without residue, to establish a comparison on physical, mechanical and electrical. The tests were conducted and technology: linear shrinkage, porosity, water absorption, resistance to bending to three points, measuring insulation resistance electrical resistivity of the material, X-ray diffraction and X-ray fluorescence Waste characterizations pointed to the existence of two phases: mullite and quartz phases are of great importance in the microstructure of the ceramic and this fact reveals a possibility for reuse in electrical porcelains. The mullite is an important constituent because it is a phase that makes it possible to increase the mechanical strength in addition to the body allows the use at high temperatures. The use of ceramic bodies residue fuses, proved feasible for application in electrical porcelain and the most significant results were obtained by the formulations with 25% waste and sintering at 1200°C

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts