9 resultados para Desempenho recente e prazos mais representativos na escolha do investidor
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
In Brazil, the selection of school principals is set in a decentralized manner by each state and city, such that processes may vary with time for a specific locality. In the state of Bahia, school principals were appointed by a higher political hierarchy until 2008, when schools under state administration started selecting principals by elections. The main goal of this work is to evaluate whether changing this specific rule affected students proficiency levels. This is achieved by using a panel data and difference-in-differences approachs that compares state schools (treatment group) to city schools (control group) that did not face a selection rule change and thus kept having their principals politically appointed. The databases used are Prova Brasil 2007, 2009 and 2011, the first one prior and the other two former to the policy change. Our results suggest that students attending schools with principals that are selected and elected have slightly lower mean proficiency levels both in mathematics and in portuguese exams than those attending schools with appointed principals. This result, according to the literature, could be related to perverse effects of selecting school administrators by vote, such as corporatism, clientelism and politicization of the school environment
Resumo:
This thesis deals with analyzing the contribution grade of the ISO 9000 quality system to the strategic performance of the Brazilian firms in the Chemistry sector, using the Balanced Scorecard system as reference. An exploratory research is developed to get technical information about these two management systems, with emphasis in their integration. After, a quantitative research is implemented using a questionnaire, to know and to obtain necessaries data for improving statistical estimations of the multiple relationships between the variables and the strategic performance for the universe of 352 Brazilians firms that make use of ISO 9000 as quality system. The size of the sample totalized 111 firms, which represent more than 31% of the selected universe. The main results show different visions of directors and managers about the significant variables that contribute for the strategic performance of the analyzed firms. The ISO 9000 system presents a big contribution to the strategic performance, when referred by the four perspectives of the Balanced Scorecard: learning and growth; internal process; customer and financial. Better performance was verified in the learning and growth perspective and reasonable performance was verified in the financial perspective
Resumo:
Increased competition in the market of urban transport, characteristic of the Brazilian cities from years 90, has required actions of the managing agencies to ensure the universality of service, enhancing efficiency and consumer welfare. It grows in the Brazilian municipalities, the need to adopt a systematic performance evaluation in terms of management system of indicators and targets appropriate to the regulatory context, which has the purpose of evaluating the accomplishment and compliance by dealers, of the services granted during the contract period, marked by increasingly long periods. The introduction of an index operational performance in permission contracts/concession in urban buses is intended to establish a regulatory performance, giving the contract a pro-competitive feature and to allow the managing agency the systematic and continuous monitoring of the performance of the delegated service to avoid major deviations from desired performance. A performance assessment model of public transportation companies by bus, and applicable to the case of Natal is proposed. Sought to add the particularities found in the transport system in order to assess the performance of enterprises, contribute to improving the service quality to the population and enable decision-makers a detailed knowledge of the behavior of the licensees
Resumo:
The lava Platform is increasing1y being adopted in the development of distributed sys¬tems with higb user demando This kind of application is more complex because it needs beyond attending the functional requirements, to fulfil1 the pre-established performance parameters. This work makes a study on the Java Vutual Machine (JVM), approaching its intemal aspects and exploring the garbage collection strategies existing in the literature and used by the NM. It also presents a set of tools that helps in the job of optimizing applications and others that help in the monitoring of applications in the production envi¬ronment. Doe to the great amount of technologies that aim to solve problems which are common to the application layer, it becomes difficult to choose the one with best time response and less memory usage. This work presents a brief introduction to each one of tbe possible technologies and realize comparative tests through a statistical analysis of the response time and garbage collection activity random variables. The obtained results supply engineers and managers with a subside to decide which technologies to use in large applications through the knowledge of how they behave in their environments and the amount of resources that they consume. The relation between the productivity of the technology and its performance is also considered ao important factor in this choice
Resumo:
In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problems
Resumo:
In this work a pyrometer using the classic model of Kimball-Hobbs was developed, tested and calibrated. The solar radiation is verified through the temperature difference between the sensible elements covered by absorbing (black) and reflecting (white) pigmentations of the incoming radiation. The photoacoustic technique was used to optimize the choice of the pigments. Methodologies associated with linearity, thermo-variation, sensibility, response time and distance are also presented. To correctly classify the results, the international standard ISO 9060 as well as indicative parameters of World Meteorological Organization (WMO) are used. In addition a system of data acquisition of two channels with 12 bits, constructed during the this time, was used to measure the global solar radiation on the ground by the pyrometer and also by another pyrometer certified in the case of Keep & zonen. The results statistically show, through the hypothesis test presented here, that both equipments find population average with 95% of correctness
Resumo:
The seismic reflection is used on a large scale in oil exploration. In case of marine acquisition the presence of high impedance contrast at the interfaces water/air generates multiple reflections events. Such multiple events can mask primary events; thus from the interpretational viewpoint it is necessary to mitigate the multiples. In this manuscript we compare two methods of multiple attenuation: the predictive multichannel deconvolution (DPM) and the F-K filtering (FKF). DPM is based in the periodicity of the multiples while FKF is based in multiples and primaries splitting in F-K domain. DPM and FKF were applied in common-offset and CDP gathers, respectively. DPM is quite sensible to the correct identification of the period and size of the filter while FKF is quite sensible to an adequate choice of the velocity in order to split multiples and primaries events in the F-K domain. DPM is a method that is designed to act over a specific event. So, when the parameters are well selected, DPM is very efficient in removing the specified multiple. Then DPM can be optimized by applying it several times, each time with a different parameterization. A deficiency of DPM occurs when a multiple is superposed to a primary event: in this situation, DPM can attenuate also the primary event. On the other hand, FKF presents almost the same performance to all multiples that are localized in the same sector of the F-K domain. The two methods can be combined in order to take advantage of their associated potentials. In this situation, DPM is firstly applied, with a focus in the sea bed multiples. Then FKF is applied in order to attenuate the remaining multiples
Resumo:
The present dissertation aims to analyze the evaluation process of environmental performance inside an organization from the building construction section of civil construction based on the NBR ISO 14031 guidelines, which provide orientation regarding the implementation of this project towards the internal organizational management. The theoretical research has addressed concepts and historical development of environmental management inside organizations, from the emergence of the first models to the strengthening of environmental management through the standardization of the Environmental Management System caused by the publication of ISO 14001. It has also addressed the evaluation of environmental performance, the NBR ISO 14031 (concepts, types of indicators of evaluation of environmental performance, the elaboration process of such indicators, as well as its use and evaluation by the high administration). The research has an applied character, with exploratory and descriptive goals, and a qualitative approach based on case study. The data collection will be made through questionnaires, interviews, and documental analysis. Through the present research project, one expects to learn the elements taken into consideration by the organization for the elaboration and selection of indicators; to identify which interested parties contribute in the aforementioned process; to discover which sources are taken into consideration by the organization while establishing its environmental performance goals; to learn how the different kinds of environmental indicators are handled by organizations on daily basis, considering the existence of interferences on the decision making process, whether or not the interested parties are integrated, and if there is an periodical evaluation of environmental performance and how it is handled. One also expects to identify the opportunities for improvement regarding the organization that is object of study.
Resumo:
In Brazil, the selection of school principals is set in a decentralized manner by each state and city, such that processes may vary with time for a specific locality. In the state of Bahia, school principals were appointed by a higher political hierarchy until 2008, when schools under state administration started selecting principals by elections. The main goal of this work is to evaluate whether changing this specific rule affected students proficiency levels. This is achieved by using a panel data and difference-in-differences approachs that compares state schools (treatment group) to city schools (control group) that did not face a selection rule change and thus kept having their principals politically appointed. The databases used are Prova Brasil 2007, 2009 and 2011, the first one prior and the other two former to the policy change. Our results suggest that students attending schools with principals that are selected and elected have slightly lower mean proficiency levels both in mathematics and in portuguese exams than those attending schools with appointed principals. This result, according to the literature, could be related to perverse effects of selecting school administrators by vote, such as corporatism, clientelism and politicization of the school environment