Estimulação transcraniana por corrente contínua e a flutuação de força em idosas durante exercício isométrico

The fluctuacion force has been increasingly used in studies with elderly as a good predictor of performance and functionality of the motor. However, most analyzes the fluctuation of force in one session. Thus, identifying the minimum amount of sessions needed for familiarization with the fluctuation strength in isometric exercise become relevant. Furthermore, to investigate the effects of applying transcranial direct current stimulation (tDCS) associated with regular exercise on rates fluctuation task force is extremely important. In the first experiment, volunteers were subjected to a protocol marked by a familiarization session to establish the parameters of VCM and eight sessions with intensity of 30% MVC in office. It was observed that two familiarization sessions are required so there is a fluctuation stabilizing force. In experiment II, subjects performed an isometric contraction before and after applying tDCS (cathode, anode and sham) applied to M1. ETCC anodic effectively contributed to reducing the fluctuation of force during isometric exercise in the elderly, while the cathodic caused the increased levels of strength fluctuation. It was concluded that there is a need to implement a familiarization protocol with at least two sessions to avoid possible misunderstandings of measurements in tests of fluctuacion force. Besides that tDCS interfered with the behavior of the oscillations of force, with cathodic promoting increased fluctuation strength and anodic contributed to greater stability, demonstrating the potential of this technique neuromodulation associated with exercise as rehabilitation tools

A influência da estimulação transcrâniana por corrente contínua nos parâmetros de dano muscular induzido pelo exercício

A estimulação transcraniana por corrente contínua (ETCC) é uma técnica não invasiva que apresenta características anti-fadigante e analgésica. Com o objetivo de testar seus efeitos sobre a diminuição da força e do aparecimento da dor muscular de início tardio (DMIT), apresentados após um evento de dano muscular induzido pelo exercício (DMIE), foi utilizado um estudo clínico de caráter experimental, controlado, randomizado e duplo-cego. A amostra foi composta por 24 jovens do sexo masculino, aparentemente saudáveis (19,7±1,8 anos; 23,6±3,65 IMC), os quais foram alocada, de forma aleatória e estratificada, nos seguintes grupos: G1: grupo controle; G2: grupo de estimulação após o dano e G3: grupo com estimulação antes e após o dano muscular. Os dados foram submetidos à estatística descritiva e análise de variância ANOVA, adotando-se um nível de significância de 5%. O aumento nos níveis séricos de CK (56.18%) e LDH (24,15%) comprovou a ocorrência do DMIE. Em contrapartida, após a análise de variância para comparação dos tratamentos aplicados, pode-se observar que não houve diferenças significativas nos níveis de CK (p= 0,3514) e força muscular (p= 0,9702). A DMIT transcorreu como esperado, mas sem diferença significativa entre os grupos (p= 0,4861). Estes dados demonstraram que a ETCC não foi capaz de modular a DMIT e a diminuição da força muscular após o DMIE em jovens aparentemente saudáveis

Efeito da estimulação transcraniana por corrente contínua anódica sobre o controle do movimento em para-halterofilistas

Introduction: The sport practiced by people with disabilities has been growing in recent years. Consequently, advances in assessment and training methods have emerged. However, the paralympic sport keeps in tow these advances, with few specific studies that consider disability as intervening factor. The transcranial direct current stimulation (tDCS) is a technique that has proven to be capable of modulating brain function. Studies show beneficial effects of tDCS on muscle strength, power and fatigue during exercise. Objective: Investigate de the effect of tDCS on movement control in para-powerlifters. Methods: Eight subjects underwent two sessions of motion capture, which previously applied the anodic tDCS or sham sessions in the cerebellum. Three movements were performed with increasing load between 90-95% of 1MR. The movements were recorded by an 10 infrared cameras system which reconstructed the 3D trajectory of markers placed on the bar. Results: There have been changes between the anodic and sham conditions over bar level (initial, final, maximum during the eccentric and concentric phase) and in the difference between the final and initial bar level. Moreover, there was difference in bar level (final and during the eccentric phase) comparing athletes amputees and les autres. Conclusion: The findings of this study suggest that tDCS applied prior to the exercise over the cerebellum in para-powerlifters acts differently according to disability

Identificação de uma planta de corrente de um motor de indução utilizando redes de base radial

The present work describes the use of a mathematical tool to solve problems arising from control theory, including the identification, analysis of the phase portrait and stability, as well as the temporal evolution of the plant s current induction motor. The system identification is an area of mathematical modeling that has as its objective the study of techniques which can determine a dynamic model in representing a real system. The tool used in the identification and analysis of nonlinear dynamical system is the Radial Basis Function (RBF). The process or plant that is used has a mathematical model unknown, but belongs to a particular class that contains an internal dynamics that can be modeled.Will be presented as contributions to the analysis of asymptotic stability of the RBF. The identification using radial basis function is demonstrated through computer simulations from a real data set obtained from the plant

Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc

Estudo da densidade de corrente crítica para reversão da magnetização de nanoelementos ferromagnéticos

The discovery that a spin-polarized current is capable of exerting a torque in a ferromagnetic material, through spin transfer, might provide the development of new technological devices that store information via the direction of magnetization. The reduction of current density to revert the magnetization is a primary issue to potential applications on non volatile random access memories (MRAM). We report a theorical study of the dipolar and shape effects on the critical current density for reversal of magnetization, via spin transfer torque (STT), on ferromagnetic nanoelements. The nanostructured system consists on a reference layer, in which the current will be spin-polarized, and a free layer of magnetization reversal. We observed considerable changes on the critical current density as a function of the element’s reversion layer thickness (t = 1.0 nm, 1.5 nm, 2.0 nm e 2.5 nm) and geometry (circular and elliptical), the material kind of the system free layer (Iron and Permalloy) and according to the orientation of the magnetization and the spin polarization with the major axis. We show that the critical current density may be reduced about 50% by reducing the Fe free layer thickness and around 75% when we change the saturation magnetization of circular nanoelements with 2.5 nm of thickness. We still observed a reduction as much as 90% on the current density of reversion for thin nanoelements magnetized along the minor axis direction, using in-plane spin polarization parallel to the magnetization.

Estimulação transcraniana por corrente contínua (ETCC) sobre o córtex motor na modulação autonômica em pessoas com lesão medular com diferentes graus e níveis de lesão

Introduction: Transcranial Direct Current Stimulation (tDCS) has been used in studies for the treatment of chronic pain, but their effects on the autonomic nervous system (ANS) are non-existent. Therefore, the need for studies is of fundamental importance, as these individuals have autonomic imbalance and the intensity of this is dependent on the degree and level of injury. Objective: We investigated the effect of tDCS on the ANS in people with spinal cord injury (SCI) with different degrees and levels of injury. Methods: Randomized, placebo-controlled, double-blind, applied anodal tDCS or sham on the primary motor cortex (M1), bilaterally. The subjects (lower incomplete injury, n = 7; lower complete injury, n = 9; and high complete thoracic injury, n = 3) visited the laboratory three times and received active or sham tDCS for 13min. The heart rate variability (HRV) was measured before, during and after stimulation and analyzed the variables LF, HF and LF / HF. Results: The tDCS modulated the ANS in different ways among the groups. In individuals with SCI high complete thoracic the tDCS did not change the HRV. However, for individuals with SCI low incomplete, tDCS changed the HRV in order to increase sympathetic (LF, p = 0.046) and reduced parasympathetic (HF, p = 0.046). For individuals SCI low complete to tDCS changed the HRV reduction sympathetic (LF, p = 0.017) and increased parasympathetic (HF, p = 0.017). Conclusions: The present study suggests that anodal tDCS applied on the motor cortex bilaterally could modulate the ANS balance in people with spinal cord injury and that this effect is dependent on the degree and level of injury.

Aqui o nativo é o caboclo... : O processo de construção da identidade cabocla em Mirandas/RN

Ce travaille de dissertation (Master) est le résultat de trois ans de travaille auprès de Mirandas, endroit situé à 22 kilomètres de la ville de Caraúbas, région ouest de l Etat du Rio Grande do Norte. Pendant cette période, on a compris que les habitants de Mirandas se identifient et sont identifiés pour les autres comme des caboclos , catégorie de classification que dans le discours courant, soit à Mirandas ou dans la siège de la municipalité, a des rapports avec la vision que les tous premiers habitants de Mirandas sont venus de la ville du Cabo , dans l Etat de Pernambuco. Et pourtant ; l usage qu a été fait de cette version a fini pour cacher des éléments qui ont défini l identité de Mirandas, tel comme la probable descendance indigène que parfois est actionnée dans les narratives qui montrent des rapports entre les portugais et des femmes indiens qu ont été pris à casco de cavalo (cheval) . (MACÊDO, 2010; CAVIGNAC, 2003). Donc, cette ethnographie porte à la lumière des éléments que sont utilisés pour les mirandenses pour définir leur identité. Cette identité peut être bien visualisé a partir des éléments que les caboclos font des signes diacritiques (BARTH, 1998; OLIVEIRA, 1976), bien comme des rapports établis entre les habitants de Mirandas et ces de Caraúbas. Des rapports qui ont rendu possible les manifestations d affinité et de conflits et que, donc, nous aide à entendre comme cette identité se réactualise dans ces rapports d union et opposition que les mirandenses construisent avec les caraubenses. Cela arrive dans les rapports territoriaux, économiques et de façon plus marquante, dans les rapports religieux.

Henrique Novaes: técnica, território e cidade em uma trajetória profissional: Brasil, primeira metade do século XX

The career of civil engineer Henrique de Novaes, a remarkable figure in the academic, technical and political fields, demonstrates its extensive and relevant work across Brazil in the first half of the twentieth century. It covered from the design of water supply and sewage works, road and rail transport networks, works against drought in the Northeast, hydroelectric and harbor facilities to the urbanization planning and architectural projects, which displays a systematic and multiple production. City and territory conformed to his fields of verification, practical and above all, transformation. The search for understanding of the inclusion of a social actor in this process thus contributes to the specific analysis of the doings of Henrique de Novaes, who graduated at Polytechnic School of Rio de Janeiro in 1906. From a polymorphic activity in different scales, one tries to figure how, through academic education or professional practice, urban history in Brazil can be told or built. The introduction of technological innovations matched the purposes of planning and urban sprawl, as well as met the specifications of regulation and institutionalization of public infrastructure services at the time. The overall plans proposed by the engineer thought of the city as a whole, interconnected to the structural networks. At the same time, the knowledge of a larger physical scale the territory bounces back in the urban in a relationship of reciprocity and completeness. The objective research, therefore, tries to understand the roles played by Henrique de Novaes s works and academic education in the accomplishment of systematic modernization of Brazilian urban space and territory, recovering a little known historical figure by current historiography. It is proposed, as methodological axis, that the study of this professional career configures itself as an essential element for understanding the idea of progress embodied in the technical studies and proposals for improvements and sanitation nationwide in the first half of the twentieth century . The primary sources for the construction of this analysis were technical articles in journals of the period ( Clube de Engenharia , Viação e Revista Brasileira de Engenharia ), and technical reports, government messages, newspaper articles published at the time, autobiographical reports and the engineer s verbal communications with relatives. The work is structured in three chapters: "Biographical traces, academic education and 'technical and political' activities" illustrates the initiation into the technical, public and political environment; Chapter 2, "Technique and territory" outlines his network understanding through sanitation and transport services; Chapter 3 "Technique and City" describes the influence of polytechnics knowledge on the propositions of modernization of cities; Finally, "Final Thoughts: An Evaluation," presents an overview of the affiliations and practice of an engineer in the different scales, and its contribution to the modernization of Brazilian urban and territorial space

Da bancada ao Bureau: análise do desenvolvimento da biotecnologia no Nordeste Brasileiro sob o enfoque de Sistema Regional de Inovação

The starting point of the present work consisted of investigating the development of biotechnology in the Northeast region of Brazil from the perspective of a Regional Innovation System (RIS). The theoretical framework adopted relied on the approaches and concepts presented by the Neo-Schumpeterian perspective. This framework was chosen because, by means of the Innovation System concept, this literature allows us to analyze the relationships and configurations of actors, as well as the role of the state and of social, science and technology, and economic policies in the studied region. The analysis considered four selected dimensions: physical infrastructure, human capital, scientific production, and funding. These variables were chosen because they allow us to verify the possibilities and limitations of developing a biotechnology RIS in the Northeast of Brazil, and these elements would help in answering the question behind this dissertation. The location of the physical infrastructure was determined by means of bibliographic and documental research and interviews with heads of institutions that do biotechnology research. Regarding human capital, the analysis focused on resource training in biotechnology, highlighting graduate courses and research groups in the area. To measure knowledge production, we delimited scientific collaboration among researchers in the field of biotechnology as the focus of this category. For the funding dimension, information was gathered from reports available at the websites of national and state funding agencies. The data was analyzed through method triangulation, involving quantitative and qualitative research stages. To back the analyses, we revisited the integration policies in the area of Science, Technology and Innovation. Our analysis has shown that these policies play a crucial role in the development of biotechnology in the region being studied. The data revealed that the physical infrastructure is concentrated in only three states (Bahia, Ceará, and Pernambuco). In this regard, the Northeast Biotechnology Network (Renorbio) stands out as a strategic actor, enabling states with poor infrastructure to develop research through partnerships with institutions located in another state. We have also verified that the practices involving human resource training and knowledge production are factors that enable the emergence of a regional system for biotechnology in the studied region. As limitations, we have verified the low immersion level of regional actors, the heterogeneity of socioeconomic indicators, the lack of financial resources, and a low innovation culture in the business sector. Overall, we have concluded that the development of a Regional Innovation System in Biotechnology, based on the current regional dynamics, depends on an effective change in the behavior of the social agents involved, both in the national and regional dimensions as well as in the public and private spheres

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Obtenção de polímeros de LCC para aplicação como antioxidante de biodiesel de soja

Biodiesel is a fuel obtained from vegetable oils, such as soy, castorbean, among others. The monoester of fatty acid of these oils have chains with mono, di and tri double connections. The presence of these insaturations are susceptible to oxidization. Antioxidants are substances able to prevent oxidization from oils, fats, fat foods, as well as esters of Alquila( biodiesel). The objective of this work is to summarize a new antioxidant from the Cashew Nut Shell Liquid (CNSL) using the electrolysis technique. A current of 2 amperes was used in a single cell of only one group and two eletrodos of stainless steel 304 in a solution of methanol, together with the eletrolits: acetic acid, sodium chloride and sodium hydroxide, for two hours of agitation. The electrolysis products are characterized by the techniques of cromatography in a thin layer, spectroscopy of infrared and gravimetric analysis. The material was submitted to tests of oxidative stability made by the techniques of spectropy of impendancy and Rancimat (EN 14112). The analyses of characterization suggest that the polimerization of the electrolytic material ocurred. The application results of these materials as antioxidants of soy biodiesel showed that the order of the oxidative stability was obtained by both techniques used

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Utilização de matérias primas vegetais para aplicabilidade como inibidores de corrosão

In the search for products that act as corrosion inhibitors and do not cause environmental, impact the use of plant extracts as corrosion inhibitors is becoming a promising alternative. In this work the efficiency of polar extracts (ethanol extracts) obtained from the plants Anacardium occidentale Linn (AO) and Phyllantus amarus Schum. & Thonn (PA) as corrosion inhibitors were evaluated in different concentrations. For that AO and PA extracts were solubilized in the microemulsion systems (SME) containing saponified coconut oil as surfactant (SME -OCS and SME-OCS-1) in saline (NaCl 3,5 %) solution, which was also used as electrolyte. Both SME-OCS and SME-OCS-1 were characterized by surface tension and viscosity methods showing a Newtonian fluid behavior. The SME-OCS and SME-OCS-1 systems satisfactorily solubilized the polar extracts AO and PA with measurements carried out by ultraviolet spectroscopy. The measurements of corrosion inhibition efficiencies were performed by the electrochemical linear polarization resistance (LPR) technique as well as weight loss, on the surface of AISI 1020 carbon steel. The maximum corrosion inhibition efficiencies were determined by extrapolation of Tafel plots, showing the following values: 95,6 % for the system SME-OCS-AO, 98,9 % for the system SME-OCS-AO-1 and 93,4 % for the system SME-OCS-PA

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance