Arquitetura da (in)segurança: estudando relações entre configuração espacial, artifícios de segurança e violência urbana no bairro Manaíra, João Pessoa, Paraíba

João Pessoa, the capital city of the state of Paraíba (Northeast Brazil), is reputed throughout the country as a quiet place, although it has been acquiring, over the past years, an urban character with social implications similar to those of major metropolitan Brazilian areas. The new situation is evident by the social inequalities, with the creation of confined spaces, which segregate and cause enclosure of the inhabitants, leading to death the public space. This study correlates accessibility in spatial structure with two types of crime data, burglary and robbery, recorded in 2008 and 2009, by the Secretaria de Segurança da Paraíba (The government agency public in charge of safety), in the district of Manaíra, an upper middle class neighborhood, which has, in recent times, been considered one of the most violent areas in João Pessoa. Sought to understand connections between these events and morpho-social aspects of the built environment, where examined the spatial properties, such as accessibility of the urban net, the presence of control measures, the safety of buildings and their uses. Spatial properties were also validated by the observation of pedestrian flows at strategic points of the study area. It was concluded that the presence of intense flows helps to attract potential thieves, physical security and control offers little protection

Entre o mar e estrela, um lugar para se bem viver : a problemática da expansão urbana da Cidade de Baía Formosa/RN

The urban expansion problem of Baía Formosa, a southern edge city of de Rio Grande do Norte eastern coast, which has been presented in other coast Brazilian towns, specially on those with tourist activities increase. Therefore, this situation brings huge concerns to their inhabitants, to their technical /scientific community and to the governments, because of the conflicts of interest and of the growth of urban problems that this has been created. At Baía Formosa, the situation is aggravated because the city is confined, once around it, there are large private proprieties, environmental preservation area and the sea, at the eastern edge. The objectives of this study are the analyses of this city expansion process in order to obtain adequate alternatives and defining methodology to apply in other urban nucleus that are subjected to similar situations. Of course, presents social relations, environmental conditions and promoting local population insertion should be considered in order that enjoin this process and contributing to a better social balance. This case study has used bibliography research, field data, maps and soil occupation recorders and photographs of the area, besides the primary data gathering by surveys carried out with many social actors. The present analysis shows that the urban expansion observed today is featured by a recent unsustainable model, which attacks the environment and brings either farm conflicts. On the other hand, the ecological tourism can represent an alternative in order to achieve an adequate expansion form, without forgetting the several structural parameters necessary to support the sustainable activities

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Estudos e propriedades mecânicas de um novo tipo de bloco cerâmico híbrido para edificações em alvenarias estruturais

This dissertation presents a hybrid ceramic block the use of which reside in the buildings executed with walls. Initially, we conducted a survey on the requirements and / or norms prevailing in Brazil about structural ceramic blocks, making use of the experiences in other countries. This work seeks new materials and / or products in order to maintain or increase the compressive strength of the ceramic blocks, without neglecting the other properties. Then was collected materials (clay and crushed powder) and an approach on the characterization, through fluorescence, Mineralogy, vitrification curve and characterization of these materials used in the manufacture of the blocks by Ray Diffraction "X" and SEM. Subsequently it was made, numbered and measured dimensions of about 150 bodies of the test piece (hybrid ceramic blocks in small sizes) with varying percentages of 0%, 5%, 10% and 15% substitution of crushed clay powder. After sintering of the bodies of the test piece at temperatures of 900oC, 1000oC 1100oC and with a heating rate of 5oC/minuto and level of 1 hour, the samples were submitted to the tests (compressive strength and water absorption) and calculated their retractions, which were subsequently carried out the analysis of the results according to the criteria and parameters required by Brazilian legislation and standards in force

Compósitos Portland-biopolímeros para cimentação de poços de petróleo

The oil production in mature areas can be improved by advanced recovery techniques. In special, steam injection reduces the viscosity of heavy oils, thus improving its flow to surrounding wells. On the other hand, the usually high temperatures and pressures involved in the process may lead to cement cracking, negatively affecting both the mechanical stability and zonal isolation provided by the cement sheath of the well. The addition of plastic materials to the cement is an alternative to prevent this scenario. Composite slurries consisting of Portland cement and a natural biopolymer were studied. Samples containing different contents of biopolymer dispersed in a Portland cement matrix were prepared and evaluated by mechanical and rheological tests in order to assess their behavior according to API (American Petroleum Institute) guidelines. FEM was also applied to map the stress distribution encountered by the cement at bottom bole. The slurries were prepared according to a factorial experiment plan by varying three parameters, i.e., cement age, contents of biopolymer and water-to-cement ratio. The results revealed that the addition of the biopolymer reduced the volume of free water and the setting time of the slurry. In addition, tensile strength, compressive strength and toughness improved by 30% comparing hardened composites to plain Portland slurries. FEM results suggested that the stresses developed at bottomhole may be 10 to 100 times higher than the strength of the cement as evaluated in the lab by unconfined mechanical testing. An alternative approach is proposed to adapt the testing methodology used to evaluate the mechanical behavior of oilwell cement slurries by simulating the confined conditions encountered at bottornhole

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Da escala médica de saúde à experiência social do saudável :diálogo entre os espaços dos bares e das academias fisiculturistas na cidade do Natal-RN

Currently, we attend a reverence of concepts ahead as health, life, youth and body. In we widen amount the ideals concerned to the healthful life, to the quality of life, the longevity and joviality and the extremities of the body represented by the illness, for the virus infection, the physical deficiency and the aging. Of the historical shades of the plague, of the hunger and the war that gagged the defenseless individual and its body, in the current days we increase the search for a full and powerful life, independent of a religious imaginary to predict the epidemic curse, the threat represented for the sick people and the incarnate divine anger in the death; or of medical science presented in the spaces of the technology and the physiology, being left fragile the social and psychological dimensions of the human confined to the patient issue and, finally, the commanded urban health politics in quantitative goals of hygienic cleaning, of the medical techniques and the education citizen. For beyond these instances, emerges in our days a plural, close and biographical agreement well of the body and welfare. On the other hand, an understanding of the healthful life and well-being that more certifies the presence of something the one that clear landmarks amongst normality and the irregularity, the esteem and the destructive vice: it has a projection of healthful life measures without conceptual models of body and health under the doctor-scientific standard occidental. This thematic one will confide in way to the enclosure for spaces to the muscles and fitness exercises and the bars from the city of Natal, in the state of Rio Grande do Norte, Brazil, while comprehensive interchange concerning as the individual comes dealing with the notion the body and health and, mainly, if perceiving inside of its body and its health. Amongst these two spaces of typical leisure of the modern urban phenomenon, the hedonism bodily with its muscles and salience and one another form of hedonism in the fruition of allowed drugs will be across itself in a dialogue about which social s relationships are really in game in an imaginary construction amongst an doctor-aesthetic ideal of health and the social and subjective experience in the option for a healthful life

Histórias de idosos: sementes para cultivarmos uam educação para uma velhice bem-sucedida

We understand that the successful old age is not confined only in the analysis of quantitative aspects concerning the economic situation of the subject that gets old, but this special way of aging is related to other values, such as dignity, happiness, self-esteem, willingness, autonomy, independence, social involvement with family and friends, among others. Thus, this study aimed to investigate the human aging process, considering the history of life of ten seniors who fit the profile of successful old age, seeking to identify elements that contribute to educational thinking in order to get a successful aging. In this perspective, we argue in this study, the idea that we need to learn to engage in experiences that more than providing satisfaction and well-being in the moment in which we conducted, serve as a potentiating to a successful old age. Thus, throughout this thesis we question: what are the present indicative in the histories of life of elderly people, considered successful, which may contribute to an education that people experiencing their age more satisfactorily. This is a qualitative study, that took as universe a methodological oral history, in which we used as a technique of research a semistructured interview as a part of their life history, with emphasis on consideration of the following categories: diary routine, with emphasis on social harmony in the family, at work and in friendship groups of leisure and physical activity, self-knowledge and the learning experiences throughout life. To get the objectives outlined, as well as lectured on the categories analyzed, we support our reflection on the theory of the course of life, which includes human aging as a historical and cultural contextual reality. Our research revealed, among other things, that successful aging is coupled to an active lifestyle, where the involvement in physical activities, recreational and social experiences throughout life is important for increasing self-esteem, autonomy and joy of living, conditions that enable successful old age. Our study also revealed that the educationfor successful old age is linked with the consumption along the life, educational activities which broaden the possibilities of social interaction between people, even among different generations, since the interaction is important to learn and accept our possibilities and limits.

Dimensões didática, afetiva e formativa de docência que tecem as representações sociais entre licenciandos da UFPI

This study intends to analyze the social representation of teaching for students of first years of undergraduate courses in Education, Letters and Biology. The field of this research was the Federal University of Piaui - Campus of Picos in 2009. To reach the objective proposed above, was used the theory of social representations to the seizure of the elements which constitute such representations according to Moscovici and colleagues, considering the contribution of Abric with his Theory of Central Nucleus and Wagner with the Theory of Sociogenesis. Data were collected in two phases: first, through the Technique of Free Association of Words (TFAW) of which 100 subjects evoked representations of their teaching through the inductor terms 'to teach', 'student' and 'teacher'. For those data we used the EVOC software that promoted to detect the elements of the core and to conclude that the social representation of teaching is one of the work performed by a master / teacher who transmits, directed to an apprentice who learns, confined to the school involving the student with all his virtues to be smart, interested and dedicated, and teacher to be friend, wise bearer of knowledge and also intelligent. Then, using the Multiple Classification Procedure (MCP) only 10 subjects made ratings of 25 more evoked words in the first phase, for the analysis of data from the MPC with the use of the SPSS software we used Multidimensional Statistical Analysis (MSA) for the Free Classification we found three dimensions of Social Representation of Teaching: The Didactic, that focuses on teacher and student being superimposed, meaning the inseparability of these elements, the Affective, which presents the elements inherent in teachers with love as the strong point of this dimension, and the Formative, that is as ambiguous as ambivalent because it sees the teacher as a professional directed to help students get an education; for Directed Classification with Similarity Structure Analysis (SSA), we learn that teaching is a profession that materializes in the classroom, which is extremely true because the action happens in this teaching space, supposing a caring, loving, cheerful, capable, apt, patient, partner, responsible, dedicated, committed educator, who has wisdom and knows how to teach and help students through dialogue to there study and learning. All of it s necessary to occur the result of teaching, which is education in a disciplinary manner. The results point to a very traditional social representation of what is the role of teachers, the role of students and the role of the relationship itself between teaching and learning through the act of teaching. With this statement, we can confirm that the structure of Social Representation of Teaching for the investigated subjects reflects the sociogenetic conditions that engendered them, and that these conditions permeate their structural organization, in particular time-context in which social representation was captured

Relatos de uma vivência interdisciplinar: educação, saúde e cidadania

This study addresses the interdisciplinary training in perspective for the Brazilian Health System (SUS) in view of graduation students in the areas of health of Federal University of Rio Grande do Norte s (UFRN) former students of the course Health and Citizenship (SACI). Emphasizes also the importance of commitment to social policies, particularly with those focused on the area of health. This is a case study with a qualitative approach. There was the lifting of data through documental research, from 14 portfolios of learning, which are weekly records of students from the respective discipline, corresponding to 2005.2 to 2007.2 semesters. From the analysis undertaken, inferred that the methodology problematizing, used by the discipline, enables students to understand that learning is not restricted to the confined university walls. It shows the health from a complex and concrete social reality, allowing students to an interdisciplinary dialogue in search of the transformation of this reality. It means an opportunity to interact with the dynamics of society in their area of activities, developing a relationship of solidarity in the formation of the citizen. Moreover, it was clear the direction of experienced interdisciplinary and recognized by students of various professions that make up the discipline. Thus, the SACI in preparation for construction of SUS, helps to form a new professional, more committed to the promotion and with a collective work in health

Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Estudo numérico do comportamento de muros de arrimo em alvenaria estrutural de blocos vazados

Usually masonry structures has low tension strength, hence the design to flexural efforts can results in high reinforcement ratio, specification of high unit and prism strength, structural members with larger section dimensions and modification in structural arrangement to be possible to use masonry members. The main objective of this study is to evaluate the stiffness, the efforts distribution and the effect of horizontal elements (girders) and vertical elements (counterforts) distribution on the behavior of masonry blocks retaining walls. For this purpose, numerical modeling was performed on typical retaining wall arrangements by varying the amount and placement of horizontal and vertical elements, beyond includes elements simulating the reactions of the soil supporting the foundation of the wall. The numerical modeling also include the macro modeling strategy in which the units, mortar and grout are discretized by a standard volume that represents the masonry elastic behavior. Also, numerical model results were compared with those ones of simplified models usually adopted in bending design of masonry elements. The results show horizontal displacements, principal and shear stresses distribution, and bending moments diagrams. From the analysis it was concluded that quantity and manner of distribution of the girders are both important factors to the panel flexural behavior, the inclusion of the foundation changed significantly the behavior of the wall, especially the horizontal displacements, and has been proposed a new way of considering the flanges section of the counterforts