Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Legislação de rotulagem nutricional: instrumento de informação na promoção de escolhas alimentares - Natal-RN

Resolutions of the Board of numbers 359 and 360, of December 23, 2003, relating to Nutrition Labelling for Packaged Foods, establish quality standards and provide the education activities for health consumption, since one of the factors that enable the selection of healthier foods are the food labels as an important part in nutrition education. This is a descriptive study with a cross-sectional design. To calculate sample size, it was considered a margin of error of 20%, confidence level of 95% and prevalence of 52.5% for verifying nutritional information in a pilot study conducted in 2007. A total of 145 subjects were interviewed, resulting in 371 consumers in Natal, Rio Grande do Norte, Brazil, in order to determine prevalence of consulting nutritional information contained on food labels as a nutritional guideline for consumers and its association with sociodemographic variables as well as identify the intervention measures suggested by intervieweds so that this information can be better used to select healthy foods. Twenty-five of the 69 supermarkets belonging to the Supermarket Association of Rio Grande do Norte (ASSURN) were randomly selected. Data collection relied on interviews and extensive direct observation, using a semi-structured form composed of eight closed questions, some of which were multiple choice, and ten open questions. The chi-square test was performed for statistical analysis, using Statistical Package for Social Sciences (SPSS) 15.0 software. Label information most consulted was: expiry date (91.6%); product brand (49.4%); nutritional information (47.0%); zero trans fat (32.9%); zero sugar content (12.8%); zero fat content (3.0%); rich in fibers (2.7%); whether light or diet (30.4%); list of ingredients (16.8%); whether the product contained gluten or not (4.1%). When asked about the importance of nutritional information, 96.8% of the subjects responded important or very important ; of these 46.6% and 3.8% reported partially or totally understanding the information presented. It was found that 41.6% of the consumers consulted nutritional information for dietary reasons related to nontransmissible chronic diseases and 35.7% to be able to choose healthier foods. The data show a significant association between motivation to choose healthier foods and higher family income and schooling (p<0.0001). The intervention measures mentioned to make nutritional information better understood and used were: information and orientation about nutritional information, provided by qualified professionals in the supermarkets, the commercial establishment or the product manufacturer (73.9%) and media disclosure about the nature, importance and purpose of nutritional information (42.9%). In despite of communication noises the consumers use the nutrition claim for the nutritional guidance, showing association with some demographic variables. However, they desire the implementation of intervention measures that can be contextualized in the political construction of nutrition education to promote healthy food choices

Abordagem inicial de lesões mamárias por biopsia helicóide: estudo experimental

OBJECTIVE: Evaluating the kit-Bh performance in carrying out of breast biopsies. METHODS: They were randomly selected a sample of 30 patients with breast cancer undergoing mastectomy, based on the results of a pilot study from February 2008 to April 2010. They were excluded women with had not palpable, stone-hard consistency tumors, previous surgical manipulation or that contains liquid. Using the helicoid biopsy Kit (kit Bh) and an equipment Core biopsy with cannula and needle and 14 gauge respectively, it was collected a fragment of sound equipment in the area and in tumors in each specimen, totaling 120 fragments for histological study. For data analysis, it was defined a 95% confidence level and used the SPSS-13 version, the Kappa index and the parametric Student t test. RESULTS: Mean age of patients was 51.6 years (± 11.1 years). The infiltrating ductal carcinoma showed a higher incidence, 26 cases (86.7%). The Core biopsy had a sensitivity of 93.3%, specificity of 100% and accuracy 96.7%, while the helicoid biopsy had a sensitivity of 96.7%, specificity of 100% and accuracy 98.3%. By comparing the histology of tumors and the fragments of biopsies, there was high degree of agreement in diagnoses (kappa of 0.93 with p <0.05) CONCLUSION: Both devices provided the histological diagnosis of lesions with high accuracy. Results of this study showed that the helicoid biopsy is a reliable alternative in 22 the preoperative diagnosis of breast lesions. Further studies in vivo better will define the role of Kit Bh in the diagnosis of these lesions

Farmacêuticos e suas atividades em farmácias comunitárias: uma análise de perfil

The aim of this study was to establish the profile of the pharmacist technician responsible for community pharmacies in the city of Natal/RN, featuring personal elements, perceived their role and place of pharmaceutical care, levels of job satisfaction, type and quality of services provided in human and structural framework. To that end, we made an exploratory cross-sectional study applying a questionnaire containing open and closed questions, which was applied to pharmaceutical technicians responsible for community pharmacies in Natal/RN, from September 2010 to September 2011. The sample was established by calculating the simple random sample, with a confidence level of 95% and a significance level of 0.05. To evaluate the satisfaction level of the activities performed by pharmacists in community pharmacies was used Simple Satisfaction Scale (Likert, 1935). To assess the attitudes and perceptions of pharmacists in relation to aspects of pharmaceutical care, we used the Model Attitude toward the object (Fishbein, Ajzen, 1975). The answers were converted into data were analyzed statistically using Epi Info 3.5.2 The results showed that the strengths and weaknesses in relation to the profile of the pharmacist and their activities in community pharmacies in Natal/RN are not different in other cities in the country . The most important aspects were: 51% (n = 90) of the establishments visited, the pharmacist was absent; 46% (n = 80) did not have postgraduate and of those who are or have completed 33% (n = 51) are in the area of Clinical Analysis; 56% (n = 98) 08h for day work and 64% (n = 111) claim that this load influence its performance; 83% (n = 146) receive as salary, the floor pharmacist regarding the state of Rio Grande do Norte; 44% (n = 76) are unhappy about the salary, which is the main difficulty cited; 78% (n = 136) say they are always sought by users and the receptivity of these considered good (52%, n = 91). The activities of higher satisfaction are those related to pharmaceutical care and lower the administrative. As regards attitudes and perceptions, the score was more negative to the question 'if the pharmacist feels working as a team with the doctor', in which 59% (n = 103) responded 'never'. 49% (n = 86) reported being "able" to take questions from users and 39% (n = 68) are 'dissatisfied' with respect to the structure of the practice of pharmacy to pharmaceutical care. Action is needed on the obstacles to the exercise of the pharmacist in the solution and minimize the negative and positive stimulus to

Avaliação da eficiência de catalisadores comerciais na obtenção de biodiesel de algodão (Gossipium hisutum L.)

The increasing demand for energy and the environment consequences derived from the use of fossil energy, beyond the future scarcity of the oil that currently is the main power plant of the world, it stimulated the research around the production of biodiesel. In this work the synthesis of biodiesel of cotton in the methyl route was carried through, for had been in such a way used catalyst commercial homogeneous, Na-Methylat and the K-Methylat, aiming to the evaluation of the efficiency of them. An experimental planning 23 was elaborated aiming to evaluate the influence of the variable (molar reason oil/alcohol, % of catalyst and temperature) in the process as well as indicating the excellent point of operation in each case. The biodiesel was analyzed by gaseous chromatography, indicating a conversion of 96,79% when used Na-Methylat® as catalytic, and 95,65% when the K-Methylat® was used. Optimum result found with regard to the conversion was obtained at the following conditions: molar reason oil/alcohol (1:8), temperature of 40°C and 1% of catalyst Na-Methylat, reaching a 96,79% conversion, being, therefore, above of the established for the European norm (96.5%). The analysis of regression showed that the only significant effect for a confidence level of 95%, was of the changeable temperature. The variance analysis evidenced that the considered model is fitted quite to the experimental response, being statistically significant; however it does not serve inside for make forecasts of the intervals established for each variable. The best samples were analyzed by infra-red (IR) that identified the strong bands of axial deformation C=O of methylic ester, characterized through analyses physicochemical that had indicated conformity with the norms of the ANP, that with the thermal and rheological analyses had together evidenced that biodiesel can be used as combustible alternative in substitution to diesel

Extração de ferro da cera de carnaúba utilizando sistemas microemulsionados

The constant search for biodegradable materials for applications in several fields shows that carnauba wax can be a viable alternative in the manufacturing of biolubricants. Carnauba wax is the unique among the natural waxes to have a combination of properties of great importance. In previous studies it was verified the presence of metals in wax composition that can harm the oxidative stability of lubricants. Considering these factors, it was decided to develop a research to evaluate iron removal from carnauba wax, using microemulsion systems (Me) and perform the optimization of parameters, such as: extraction pH, temperature, extraction time, among others. Iron concentration was determined by atomic absorption and, to perform this analysis, sample digestion in microwave oven was used, showing that this process was very efficient. It was performed some analysis in order to characterize the wax sample, such as: attenuated total reflectance infrared spectroscopy (ATR-IR), thermogravimetry (TG), differential scanning calorimetry (DSC), energy dispersive X-ray fluorescence (EDXRF), scanning electron microscopy (SEM) and melting point (FP). The microemulsion systems were composed by: coconut oil as surfactant, n-butanol as cosurfactant, kerosene and/or heptanes as oil phase, distilled water as water phase. The pH chosen for this study was 4.5 and the metal extraction was performed in finite experiments. To evaluate Me extraction it was performed a factorial design for systems with heptane and kerosene as oil phase, also investigating the influence of temperature time and wax/Me ratio, that showed an statistically significant answer for iron extraction at 95% confidence level. The best result was obtained at 60°C, 10 hours contact time and 1: 10 wax/Me ratio, in both systems with kerosene and heptanes as oil phase. The best extraction occurred with kerosene as oil phase, with 54% iron removal

Qualidade de vida, eficiência mastigatória e presença de disfunção temporomandibular em usuários de prótese parcial removível com arco dental curto inferior

Even nowadays there is in Brasil a large number of edentulous and a precarious financial condition of most of the population. In addition, World Health Organization aims for oral health, which consists on the maintenance of a natural dentition, functional and aesthetic composed of at least 20 teeth, without need of prosthetic intervention throughout life. From this and considering the lack of researches about the permanence of edentulous spaces in the oral cavity, and also avoiding overtreatment, this research has been proposed. Thus, the aim was to evaluate the effect of different lengths of the shortened lower dental arch in the presence or absence of a removable partial denture (RPD) on masticatory function, quality of life and occurrence of temporomandibular dysfunction. To achieve this goal, we compared the masticatory efficiency (colorimetric test), the oral comfort through the analysis of the impact of oral health in quality of life (OHIP-14), the presence of temporomandibular dysfunction (RDC/TMD) and the general quality of life (WHOQOL) of patients with shortened dental arches (SDA) (n=60), which is an arch with a reduction of teeth starting posteriorly, and patients with complete dental arch (Complete DA) (n = 34). The group of patients whit SDA was divided among PPR wears (PPD + SDA) (n = 17) and non-wears (n = 43). The population of this study consisted on patients who received or looked for treatment at the clinics of the Department of Dentistry of UFRN, from clinical analysis and records. The sample was chosen by convenience. For statistical analysis, it was a database in SPSS 17.0, followed by descriptive analysis with frequencies, absolute values, tests of central tendency and variability. The statistical tests used were chi-squared and analysis of variance as well as Tukey s post test, when applicable, all with a 95% confidence level. The results shown a prevalence of TMD of 47,1% among patients using PRP and 69,8% among those who didn t, but this result wasn t statistically significant. The mean of the results of masticatory efficiency, WHOQOL and OHIP didn t show association to the presence or absence of PPR and to the lower number of occlusal units of the patients (0, 1, 2 or more occlusal). The association only occurred among the different groups of SDA and the patients with complete dental arch. Taking into account the results, it could be observed that studied patients with low posterior support using lower PRP didn t have better masticatory efficiency, general quality of life, less impacts of their oral conditions in quality of life or not even less temporomandibular dysfunction or better masticatory efficiency when compared to those who didn t use the prosthesis

Prevalência e susceptibilidade antimicrobiana de Staphylococcusspp. em quadros de saúde e doença periodontal

The aim of this study was determine the prevalence and antimicrobial susceptibility of Staphylococcus spp. from patients with periodontal disease and periodontally healthy, correlate them with factors to host, local environment and traits of the diseases. To this, thirty adults from 19 to 55 years old were selected. They had not periodontal treatment and no antibiotic or antimicrobial was administered during three previous months. From these individuals, sites periodontally healthy, with chronic gingivitis and/or periodontitis were analyzed. Eighteen subgingival dental biofilm samples were collected through sterile paper points being six from each tooth randomly selected, representing conditions mentioned. They were transported to Oral Microbiology laboratory, plated onto Mannitol Salt Agar (MSA) and incubated at 370C in air for 48 h. Staphylococcus spp. were identified by colonial morphology, Gram stain, catalase reaction, susceptibility to bacitracin and coagulase activity. After identification, strains were submitted to the antibiotic susceptibility test with 12 antimicrobials, based on Kirby-Bauer technique. To establish the relation between coagulase-negative Staphylococcus (CSN) presence and their infection levels and host factors, local environment and traits of diseases were used Chi-square, Mann-Whitney and Kruskal-Wallis tests to a confidence level of 95%. 86,7% subjects harbored CSN in 11,7% periodontal sites. These prevalence were 12,1% in healthy sites, 11,7% in chronic gingivitis, 13,5% in slight chronic periodontitis, 6,75% in moderate chronic periodontitis and in sites with advance chronic periodontitis was not isolated CSN, without difference among them (p = 0,672). There was no significant difference to presence and infection levels of CSN as related to host factors, local environm ent and traits of the diseases. Amongst the 74 samples of CSN isolated, the biggest resistance was observed to penicillin (55,4%), erythromycin (32,4%), tetracycline (12,16%) and clindamycin (9,4%). 5,3% of the isolates were resistant to oxacilin and methicillin. No resistance was observed to ciprofloxacin, rifampicin and vancomycin. It was concluded that staphylococci are found in low numbers in healthy or sick periodontal sites in a similar ratio. However, a trend was observed to a reduction in staphylococci occurrence toward more advanced stages of the disease. This low prevalence was not related to any variables analyzed. Susceptibility profile to antibiotics demonstrates a raised resistance to penicillin and a low one to methicillin. To erythromycin, tetracycline and clindamycin was observed a significant resistance

Efeito do alerta e valência emocional nos componentes de lembrança e familiaridade da memória episódica

The episodic memory system allows us to retrieve information about events, including its contextual aspects. It has been suggested that episodic memory is composed by two independent components: recollection and familiarity. Recollection is related to the vivid e detailed retrieval of item and contextual information, while familiarity is the capability to recognize items previously seen as familiars. Despite the fact that emotion is one of the most influent process on memory, only a few studies have investigated its effect on recollection and familiarity. Another limitation of studies about the effect of emotion on memory is that the majority of them have not adequately considered the differential effects of arousal and positive/negative valence. The main purpose of the current work is to investigate the independent effect of emotional valence and arousal on recollection and familiarity, as well as to test some hypothesis that have been suggested about the effect of emotion on episodic memory. The participants of the research performed a recognition task for three lists of emotional pictures: high arousal negative, high arousal positive and low arousal positive. At the test session, participants also rated the confidence level of their responses. The confidence ratings were used to plot ROC curves and estimate the contributions of recollection and familiarity of recognition performance. As the main results, we found that negative valence enhanced the component of recollection without any effect on familiarity or recognition accuracy. Arousal did not affect recognition performance or their components, but high arousal was associated with a higher proportion of false memories. This work highlight the importance of to consider both the emotional dimensions and episodic memory components in the study of emotion effect on episodic memory, since they interact in complex and independent way

Otimização de parâmetros mecânicos e microestruturais dos moldes em areia de sílica ligados quimicamente pelo processo de cura a frio em fundição de aço

Surface defects on steel parts borne costs of smelting industries due to the need of rework. Sand molds are frequently used in foundry industries and largely responsible for providing surface defects. This study aims to optimize the levels of the molding process variables to minimize the occurrence of surface defects in steel castings in silica sand molds chemically linked by cold cure process. The methodology used the experimental design with split plot, being considered in the study the resin percentage factors in the mold formulation, addition of iron oxide, type of paint, the paint application method, amount of ink layers, use of hot air along the lines and waiting time of the mold before casting. They were analyzed as response variables erosion defects, sand inclusion, penetration, porosity and surface finish. Tensile strength tests were performed to evaluate the influence of factors on mechanical parameters and the microstructural parameters were carried out the analysis of X-ray diffraction, scanning electron microscopy (SEM) and thermal analysis (TG / DSC / dilatometry). The results elucidate that for the faulty erosion, the only significant factor with a 95% confidence level was the type of ink and the ink alumina-based superior results obtained. For the sand inclusion of defect, there were three significant factors, with best results obtained with alumina-based paint and spray applied using hot air in the mold before casting the metal. For the defect penetration, there were four significant factors, the best results being achieved with 0.8% of resin and addition of iron oxide in the molding formulation, the paint being applied by brush and standby time of 24 hours before leak. For the defect porosity with a 95% confidence level, no significant factors. For the defect surface finish, the best results were achieved with the 0.8% formulation of the resin in the mold and application of the paint brush. To obtain the levels of the factors that optimize all defects simultaneously, we performed a weighted average of the results of each type of fault, concluding that the best levels of the factors were: 0.8% resin and addition of iron oxide in the formulation of the template, application of two coats of paint applied with a brush or spray, using hot air in the mold before casting and 24 hours of waiting ready the mold before casting. These levels of the optimized factors were used in an experiment to confirm that ratified the results, helping to reduce rework and consequently reducing costs of cast steel parts.

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%