Geração de renda e ocupações na cadeia agroindustrial de castanha de caju no Rio Grande do Norte: o caso do sertão de Apodi

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Controle de estoques de sal: uma inovação da quantificação e no gerenciamento dos recursos naturais da indústria mineral

The strengthening of the domestic industry in Brazil required the modernization, mechanization and expansion of salt production. Thereafter the production of sea salt started to be made in a process of continuous flow, where the product is constantly stored in yards, with daily movements in and out of salt. Thus far, the major bottleneck found in this production process is the control of production, because due to the large amount produced and variety of losses existing in the various stages of production there are not a regulated and safe way to control inventories with accuracy and speed demanded. In a typical case with a salt marsh company of Rio Grande do Norte state, salt produced is stored in two open courtyards and inventory control of salt made by carrying input / output relationship of salt in each storage yard. This work developed a conceptual model of inventory control, based on topography, adopting surveys into one of the courtyards of the company. There were 25 biweekly survey measurements over a year book to generate digital models representing the stock. For each measurement, results were compared with the values of inventory accounting provided by the salt marsh in order to identify existing losses and mark out the sales department on the actual stock available at each measurement date. Inventories calculated by the model indicated losses of 6,349 tonnes for the period of one year book and 3,279 tonnes for the period between harvests, when compared to the accounting control

Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters

Contabilidade do crescimento pelo lado da demanda agregada: uma proposta de cálculo das contribuições ao crescimento pela demanda agregada para o Brasil de, 2000 a 2009, utilizando matrizes insumo-produto

The demand side growth accounting studies the demand aggregate component contributions in the Gross Domestic Product (GDP). Traditionally, international and national organizations that uses the traditional method for calculating such contributions. However, this method does not take into account the effect the induction of imports by the various components of aggregate demand on the calculation of these. As an alternative to this method are presented others studies that consider this effect, as the alternative method proposed by Lara (2013), the attribution method, proposed by Kranendonk and Verbruggen (2005) and Hoekstra and van der Helm (2010), and the method the sraffian supermultiplier, by Freitas and Dweck (2013). Was made a summary of these methods, demonstrating the similarities and differences between them. Also, in the aim to contribute to the study of the subject was developed the “method of distribution of imports” that aims to distribute imports for the various components of aggregate demand, through the information set forth in the input-output matrices and tables of resources and uses. Were accounted the contributions to the growth of macroeconomic aggregates for Brazil from 2001 to 2009 using the method of distribution, and realized comparison with the traditional method, understanding the reasons for the differences in contributions. Later was done comparisons with all the methods presented in this work, between the calculated contributions to the growth of the components of aggregate demand and the domestic and external sectors. Was verified that the methods that exist in the literature was not enough to deal with this question, and given the alternatives for contributions to the growth presented throughout this work, it is believed that the method of distribution provides the best estimates for the account of contributions by aggregate demand sector. In particular, the main advantage of this method to the others is the breakdown of the contribution of imports, separated by aggregate demand component, which allows the analysis of contribution of each component to GDP growth. Thus, this type of analysis helps to study the pattern of growth of the Brazilian economy, not just the theoretical point of view, but also empirical and basis for the decision to economic policies

SurRFE -Sub-rede de filtragens específicas

The increasing of the number of attacks in the computer networks has been treated with the increment of the resources that are applied directly in the active routers equip-ments of these networks. In this context, the firewalls had been consolidated as essential elements in the input and output control process of packets in a network. With the advent of intrusion detectors systems (IDS), efforts have been done in the direction to incorporate packets filtering based in standards of traditional firewalls. This integration incorporates the IDS functions (as filtering based on signatures, until then a passive element) with the already existing functions in firewall. In opposite of the efficiency due this incorporation in the blockage of signature known attacks, the filtering in the application level provokes a natural retard in the analyzed packets, and it can reduce the machine performance to filter the others packets because of machine resources demand by this level of filtering. This work presents models of treatment for this problem based in the packets re-routing for analysis by a sub-network with specific filterings. The suggestion of implementa- tion of this model aims reducing the performance problem and opening a space for the consolidation of scenes where others not conventional filtering solutions (spam blockage, P2P traffic control/blockage, etc.) can be inserted in the filtering sub-network, without inplying in overload of the main firewall in a corporative network

CAD e engenharia reversa como ferramentas de auxílio na fabricação de cartuchos para próteses ortopédicas

The manufacturing of above and below-knee prosthesis starts by taking surfac measurements of the patient s residual limb. This demands the making of a cartridg with appropriate fitting and customized to the profile of each patient. The traditiona process in public hospitals in Brazil begins with the completion of a record file (according to law nº388, of July 28, 1999 by the ministry of the health) for obtaining o the prosthesis, where it is identified the amputation level, equipment type, fitting type material, measures etc. Nowadays, that work is covered by the Brazilian Nationa Health Service (SUS) and is accomplished in a manual way being used commo measuring tapes characterizing a quite rudimentary, handmade work and without an accuracy.In this dissertation it is presented the development of a computer integrate tool that it include CAD theory, for visualization of both above and below-knee prosthesis in 3D (i.e. OrtoCAD), as well as, the design and the construction a low cos electro-mechanic 3D scanner (EMS). This apparatus is capable to automatically obtain geometric information of the stump or of the healthy leg while ensuring smalle uncertainty degree for all measurements. The methodology is based on reverse engineering concepts so that the EMS output is fed into the above mentioned academi CAD software in charge of the 3D computer graphics reconstruction of the residualimb s negative plaster cast or even the healthy leg s mirror image. The obtained results demonstrate that the proposed model is valid, because it allows the structura analysis to be performed based on the requested loads, boundary conditions, material chosen and wall thickness. Furthermore it allows the manufacturing of a prosthesis cartridge meeting high accuracy engineering patterns with consequent improvement in the quality of the overall production process

Sistema especialista fuzzy para dimensionamento de bombeio mecânico

Despite the emergence of other forms of artificial lift, sucker rod pumping systems remains hegemonic because of its flexibility of operation and lower investment cost compared to other lifting techniques developed. A successful rod pumping sizing necessarily passes through the supply of estimated flow and the controlled wear of pumping equipment used in the mounted configuration. However, the mediation of these elements is particularly challenging, especially for most designers dealing with this work, which still lack the experience needed to get good projects pumping in time. Even with the existence of various computer applications on the market in order to facilitate this task, they must face a grueling process of trial and error until you get the most appropriate combination of equipment for installation in the well. This thesis proposes the creation of an expert system in the design of sucker rod pumping systems. Its mission is to guide a petroleum engineer in the task of selecting a range of equipment appropriate to the context provided by the characteristics of the oil that will be raised to the surface. Features such as the level of gas separation, presence of corrosive elements, possibility of production of sand and waxing are taken into account in selecting the pumping unit, sucker-rod strings and subsurface pump and their operation mode. It is able to approximate the inferente process in the way of human reasoning, which leads to results closer to those obtained by a specialist. For this, their production rules were based on the theory of fuzzy sets, able to model vague concepts typically present in human reasoning. The calculations of operating parameters of the pumping system are made by the API RP 11L method. Based on information input, the system is able to return to the user a set of pumping configurations that meet a given design flow, but without subjecting the selected equipment to an effort beyond that which can bear