Produção de enzimas quitosanolíticas utilizando Paenibacillus ehimensis e Paenibacillus chitinolyticus para obtenção de quitoologossacarídeos

The acquisition of oligosaccharides from chitosan has been the subject of several studies in the pharmaceutical, biochemical, food and medical due to functional properties of these compounds. This study aimed to boost its production of chitooligosaccharides (COS) through the optimization of production and characterization of chitosanolytic enzymes secreted by microorganisms Paenibacillus chitinolyticus and Paenibacillus ehimensis, and evaluating the antioxidant potential of the products obtained. In the process of optimizing the production of chitosanase were employed strategies Fractional Factorial Experimental Design and Central Composite Rotatable Design. The results identified the chitosan, peptone and yeast extract as the components that influenced the production of chitosanase by these microorganisms. With the optimization of the culture media was possible to obtain an increase of approximately 8.1 times (from 0.043 to 0.35 U.mL U.mL-1) and 7.6 times (from 0.08 U.mL-1 to 0.61 U.mL-1) in the enzymatic activity of chitosanase produced by P. chitinolyticus and P. ehimensis respectively. Enzyme complexes showed high stability in temperature ranges between 30º and 55º C and pH between 5.0 and 9.0. Has seen the share of organic solvents, divalent ions and other chemical agents on the activity of these enzymes, demonstrating high stability of these crude complexes and dependence of Mn2+. The COS generated showed the ability of DPPH radical scavenging activity, reaching a maximum rate of scavenging of 61% and 39% when they were produced with enzymes of P. ehimensis and P. chitinolyticus respectively. The use of these enzymes in raw form might facilitate its use for industrial applications

Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09

Gêneros do discurso e escrita: o que as coleções didáticas de português (des)prestigiam no ensino da produção textual?

Through the examination of official indicators, it can be observed that writing is pointed out as one of the main problems concerning formal basic education. However, this teaching-learning object is one of the central objectives at school, having an essential role in different curricular components as well as in the interaction demands required by society. Such paradox indicates, therefore, the relevance of investigations which analyze the intrinsic elements of child development as written text producer. Hence, the main purpose of this research consists of analyzing the treatment given to the types of discourse and the teaching situations in which the written text are produced, concerning Portuguese language didactic material collections approved by Programa Nacional do Livro Didático (PNLD 2010) the Brazilian program of didactic book and worked at elementary school. Such materials correspond to the collections adopted in municipal education system schools from Natal, RN which were below the official education indicator IDEB 2009. Thus, the questions that guide this work are: 1. During writing production lessons, is the diversity of types of discourse effectively worked on didactic collections? 2. Which are the types of discourse and the social spheres prioritized when teaching writing production? 3. How is the situation addressed in the production of the written text should be produced? For this research, we retook the authors Bakhtin, Bunzen, Faraco, Freire, Rodrigues, Rojo, Schneuwly e Dolz and we made a list of all types of discourse and spheres contemplated in the propositions of the writing production in didactical books, concerning the eight collections which compounds the first moment of analysis. Then, we verified how the situation of production is oriented by examining two didactic collections if and how they express the elements referring to the social-historical, functional and linguistic-discursive context of the text to be produced. The data obtained indicate: lack of diversification of types of discourse in the collection that compounds the Aggregate Sample of the research; the conception of a diversity based on the didactic of visiting; the recognition of all canonical and hegemonic types of text as one of the privileged objects of study; the centralization on the standard variety of the language and the devaluation of the representative types of cultural diversity; the shortage of productions which retrace to written language related to different technologies of communication and information; and the little emphasis on the types of discourse related to public language practices. As for the situations of production, it is observed the predominance of the school as a producer of dialogic relationships, whose propositions present, for example, text addressees, enunciative positions, support and contexts of restricted circulation, especially at school. Two divergent situations are observed among the collections: the lack of a work in which the situation of production is under the perspective of the types of discourse as object of teaching-learning; the concept of the types of discourse as object of reflection, presenting a differentiated didactic orientation towards the situation of production. This research contributes, therefore, with a mapping of the existence and the treatment of the types of discourse on propositions of writing production in didactic books; with the critical analysis of the approach of written activities, considering the elements of the historical-social, functional and linguistic-discursive context; thus, through teaching, research and public policies, use and selection of didactic material for the area

Avaliação de pastagens tropicais em sistemas de produção de ovinos de corte no nordeste brasileiro

He aim of this study was to evaluate the structural characters, herbage accumulation, nutritive value and performance of sheep in different tropical pastures. The treatments were two cultivars and two of the genera Panicum Brachiaria pastures under intermittent stocking and variable stocking rate, in the rainy season. We evaluated the masses and the components of herbage pre grazing in two layers, and after grazing. Chemical analyzes were made of the stems and leaf blades pre grazing in two layers. We used 48 male sheep and whole for the assessment of individual weight gain and area, and anestrous females to adjust the stocking rate. In the cv. Massai showed the highest herbage mass, leaf blades and dead material, and the largest volume density and leaf blade: stem pre grazing. There was no difference among cultivars for the percentage of leaf blade (PLB) in both strata, but the higher the PLB was higher than the bottom. The highest percentage of dead material (PDM) was observed in cvs. Massai and Marandu in the two strata. In cvs. Massai and Piatã were observed lower levels of crude protein in stem and leaf. In stratum 0-25 cm lower nutritional value was observed in the stem in the leaf blades did not grant the nutritional value among the strata. Herbage mass, leaf blade, PLB and proportion of stem in the residue of the Massai pastures were higher than cv. Aruana. There was no difference for efficiencies in harvest leaf and stem between the cultivars. The cv. Massai got the higher accumulation of leaf per cycle per day. Animals kept in grass swards Aruana had the highest average daily gain. The higher stocking rates and earnings per area were observed in grass swards and Marandu Massai. The cultivars are suitable for sheep meat production in the rainy season

Avaliação dos impactos ambientais e sociais gerados pela utilização do kit Embrapa de ordenha manual na produção de leite de cabra

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Estudo da descelularização tecidual na produção de arcabouços biológicos para enxertos

The regeneration of bone defects with loss of substance remains as a therapeutic challenge in the medical field. There are basically four types of grafts: autologous, allogenic, xenogenic and isogenic. It is a consensus that autologous bone is the most suitable material for this purpose, but there are limitations to its use, especially the insufficient amount in the donor. Surveys show that the components of the extracellular matrix (ECM) are generally conserved between different species and are well tolerated even in xenogenic recipient. Thus, several studies have been conducted in the search for a replacement for autogenous bone scaffold using the technique of decellularization. To obtain these scaffolds, tissue must undergo a process of cell removal that causes minimal adverse effects on the composition, biological activity and mechanical integrity of the remaining extracellular matrix. There is not, however, a conformity among researchers about the best protocol for decellularization, since each of these treatments interfere differently in biochemical composition, ultrastructure and mechanical properties of the extracellular matrix, affecting the type of immune response to the material. Further down the arsenal of research involving decellularization bone tissue represents another obstacle to the arrival of a consensus protocol. The present study aimed to evaluate the influence of decellularization methods in the production of biological scaffolds from skeletal organs of mice, for their use for grafting. This was a laboratory study, sequenced in two distinct stages. In the first phase 12 mice hemi-calvariae were evaluated, divided into three groups (n = 4) and submitted to three different decellularization protocols (SDS [group I], trypsin [Group II], Triton X-100 [Group III]). We tried to identify the one that promotes most efficient cell removal, simultaneously to the best structural preservation of the bone extracellular matrix. Therefore, we performed quantitative analysis of the number of remaining cells and descriptive analysis of the scaffolds, made possible by microscopy. In the second stage, a study was conducted to evaluate the in vitro adhesion of mice bone marrow mesenchymal cells, cultured on these scaffolds, previously decellularized. Through manual counting of cells on scaffolds there was a complete cell removal in Group II, Group I showed a practically complete cell removal, and Group III displayed cell remains. The findings allowed us to observe a significant difference only between Groups II and III (p = 0.042). Better maintenance of the collagen structure was obtained with Triton X-100, whereas the decellularization with Trypsin was responsible for the major structural changes in the scaffolds. After culture, the adhesion of mesenchymal cells was only observed in specimens deccelularized with Trypsin. Due to the potential for total removal of cells and the ability to allow adherence of these, the protocol based on the use of Trypsin (Group II) was considered the most suitable for use in future experiments involving bone grafting decellularized scaffolds

Produção e validação de um indicador de saúde bucal para idosos a partir de dados secundários do SB Brasil 2010

Dentre os vários aspectos da saúde do idoso, a saúde bucal merece atenção especial pelo fato de que, historicamente, nos serviços odontológicos, não se considera esse grupo populacional como prioridade de atenção. Por isso, se faz necessária a produção de um indicador multidimensional capaz de mensurar todas as alterações bucais encontradas em um idoso, facilitando a categorização da saúde bucal como um todo. Tal indicador representará um importante instrumento capaz de elencar prioridades de atenção voltadas à população idosa. Portanto, o estudo em questão propõe a produção e validação de um indicador de saúde bucal a partir dos dados secundários coletados pelo projeto SB Brasil 2010 referente ao grupo etário de 65 a 74 anos. A amostra foi representada pelos 7619 indivíduos do grupo etário de 65 a 74 anos que participaram da pesquisa nas 5 (cinco) regiões do Brasil. Tais indivíduos foram submetidos à avaliação epidemiológica das condições de saúde bucal, a partir dos índices CPO-d, CPI e PIP. Além disso, verificou-se o uso e necessidade de prótese, bem como características sociais, econômicas e demográficas. Uma análise fatorial identificou um número relativamente pequeno de fatores comuns, através da análise de componentes principais. Após a nomenclatura dos fatores, foi realizada a soma dos escores fatoriais por indivíduo. Por último, a dicotomização dessa soma nos forneceu o indicador de saúde bucal proposto. Para esse estudo foram incluídas na análise fatorial 12 variáveis de saúde bucal oriundas do banco de dados do SB Brasil 2010 e, também 3 variáveis socioeconômicas e demográficas. Com base no critério de Kaiser, observa-se que foram retidos cinco fatores que explicaram 70,28% da variância total das variáveis incluídas no modelo. O fator 1 (um) explica sozinho 32,02% dessa variância, o fator 2 (dois) 14,78%, enquanto que os fatores 3 (três), 4 (quatro) e 5 (cinco) explicam 8,90%, 7,89% e 6,68%, respectivamente. Por meio das cargas fatoriais, o fator um foi denominado dente hígido e pouco uso de prótese , o dois doença periodontal presente , o três necessidade de reabilitação , já o quarto e quinto fator foram denominados de cárie e condição social favorável , respectivamente. Para garantir a representatividade do indicador proposto, realizou-se uma segunda análise fatorial em uma subamostra da população de idosos investigados. Por outro lado, a aplicabilidade do indicador produzido foi testada por meio da associação do mesmo com outras variáveis do estudo. Por fim, Cabe ressaltar que, o indicador aqui produzido foi capaz de agregar diver sas informações a respeito da saúde bucal e das condições sociais desses indivíduos, traduzindo assim, diversos dados em uma informação simples, que facilita o olhar dos gestores de saúde sobre as reais necessidades de intervenções em relação à saúde bucal de determinada população

A produção do espaço rural no município de Ceará-Mirim

This research intended to study the process of production of the rural space in the municipal district of Little Ceará-Mirim, looking for to identify the transformations in him happened, above all in the last thirty years. Since the beginning of your historical formation, the area in study had as element modelador and transformer of the physiognomy of your territory the culture canavieira that printed in your economy and in your society marks of a powerful nobility. The sugar-cane is covered of a cyclical character facing acme phases and decadence, as the one that it happens at the present time. Simultaneously, the sphere rural cearimirinense is going by changes by the implantation of modern companies gone back to the papaya production destined to the internal market and more precisely to the external market. Of this context they also consist the supplying farms of this same product. In the group of the establishments in the rural landscape here analyzed, they still interfere the mixed farms, the ones that practice agriculture, the ones that were devoted to the livestock, as well as the farms and the ranches. Another innovation is the caprinocultura developed in modern molds, using the system voisin of pasture rodízio being constituted in a pioneering experience in Brazil. Of that reality they announce other elements, to example of the establishments, being configured as new forms of use of the soil. In the perspective of turning them productive, the challenge resides of overcoming the difficulties in them existent. The reality of the space in screen is replete of lacks in all the instances. It is inferred that the municipal district possesses an enormous potential, however the performance of the administrative components is seen as deficient. He becomes urgent that the municipal public power promotes changes, mainly in what it respects to the social area, with a better attendance to the rural communities, for them to act positively in the process of the development of this municipal district

Produção de enzimas quitosanolíticas utilizando Paenibacillus ehimensis e Paenibacillus chitinolyticus para obtenção de quitoologossacarídeos

The acquisition of oligosaccharides from chitosan has been the subject of several studies in the pharmaceutical, biochemical, food and medical due to functional properties of these compounds. This study aimed to boost its production of chitooligosaccharides (COS) through the optimization of production and characterization of chitosanolytic enzymes secreted by microorganisms Paenibacillus chitinolyticus and Paenibacillus ehimensis, and evaluating the antioxidant potential of the products obtained. In the process of optimizing the production of chitosanase were employed strategies Fractional Factorial Experimental Design and Central Composite Rotatable Design. The results identified the chitosan, peptone and yeast extract as the components that influenced the production of chitosanase by these microorganisms. With the optimization of the culture media was possible to obtain an increase of approximately 8.1 times (from 0.043 to 0.35 U.mL U.mL-1) and 7.6 times (from 0.08 U.mL-1 to 0.61 U.mL-1) in the enzymatic activity of chitosanase produced by P. chitinolyticus and P. ehimensis respectively. Enzyme complexes showed high stability in temperature ranges between 30º and 55º C and pH between 5.0 and 9.0. Has seen the share of organic solvents, divalent ions and other chemical agents on the activity of these enzymes, demonstrating high stability of these crude complexes and dependence of Mn2+. The COS generated showed the ability of DPPH radical scavenging activity, reaching a maximum rate of scavenging of 61% and 39% when they were produced with enzymes of P. ehimensis and P. chitinolyticus respectively. The use of these enzymes in raw form might facilitate its use for industrial applications

Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09