103 resultados para Colagem dentária
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
NORO, Luiz Roberto Augusto et al. Incidência de cárie dentária em adolescentes em município do Nordeste brasileiro, 2006, Cadernos de Saúde Pública, Rio de Janeiro, v. 25, n. 4, p. 783-790, abr. 2009.
Resumo:
The objectives of this clinical study was to evaluate the use of the toothpaste with fluoride and without fluoride and the daily tooth brushing are effective in the reversion of the dental enamel conditioned by acid. Another objective of this clinical study was to evaluate if the positioning of orthodontic accessories with glass ionomer cement helps in the reversion of the dental enamel conditioned by acid, when compared to composed resin. One hundred and twenty teeth were selected with indication of extraction by orthodontic reasons. The 30 volunteers were divided, randomly, in two groups. A group used toothpaste without fluoride and the other with it. The teeth of the sample were shuffled, in each volunteer. The teeth were conditioned by the 37% orthophosphoric acid. One of the conditioned teeth stayed in the mouth and suffered action of the abrasion for the tooth brushing, in another teeth a stainless steel mesh protection was positioned with glass ionomer cement, in another tooth the screen was glued with composed resin, in a fourth tooth (the control) was only conditioned after the extractions, 60 days later. All the teeth were appraised through DIAGNOdent, MEVA and EDS. In the obtained data it was possible to observe that there were not statistic significant differences in any comparison, even in the group that did not have access to the fluoride in the toothpaste as in the other that had. According with the used methodology, it was possible to observe too that there was not statistic significant differences in any comparison, even in the group that had the stainless steel mesh positioned with glass ionomer cement as in the group that the stainless steel mesh was positioned with composed resin. However, it was observed that there was an improvement in the topography of the enamel in all the teeth. The accomplishment of this study was facilitated due to the participation of the researchers' of the health area (dentistry), materials engineer, physics and chemistry. The researchers were originating from the Federal University of Rio Grande do Norte and of the University of Queensland, in Australia. This interdisciplinary group was decisive in the accomplishment of the study. It can be concluded that the enamel tends to return to its initial aspect, even if the patient does not have access to fluoride. That is probably due the action of the abrasion for the tooth brushing and mastication. In spite of it not being significant, it is suggested that the conditioned enamel was more resistant to the abrasion in the group that had access to fluoride. It was also possible to conclude that the fluoride liberated by the glass ionomer was not enough to provide a significant difference in the enamel conditioned by the acid, when compared with the composed resin, even in the group that did not use fluoride in the toothpaste as in the group that used
Resumo:
The purpose of this study was to evaluate the effectiveness during a twelve-month period, of resin-modified glass ionomer (Vitremer@) used as fissure sealants compared to supervised teeth brushing in the prevention of oclusal caries in permarient molars of pubIlc school children from 5 to 7 years of age. A total of 91 children participated in the study, being randomly divided up into three groups of investigation: group with sealant (n=31), group of supervised brushing (m=30), and control gorup (n=30). After 12 months, a total of 28.5% of tosses in the sample of 26 children was registered, and although there wasn t a significant diference between these losses and the groups studles (p = 0.6355), there was a considerable reduction in the sample. The results showed that none of the independentIy studied variables (present caries experience, biofilm, bleeding, sealant retention, position of the tooth in the arch, and sex) interfered in the final results, and that there was no significant difference between applying the sealant in question, perfornling supervised dental brushing, or not intervening at alI (p=0.542). These results could have been a consequence of the limitations found alI through the study, especially relating to the losses occurred because of school evasion, transfer, or because of the accident in the Marise Paiva Municipal School, Keeping students away for approximately one semester, so tht a new reseach had to be developed sos as to better clarify the effects among the treatments done there
Resumo:
The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software
Resumo:
Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.
Resumo:
Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.
Resumo:
OBJETIVO: Analizar limitaciones del estudio de fluorosis dentaria en pesquisas transversales. MÉTODOS: Se utilizaron datos de estudios de de Condiciones de Salud Bucal de la Población Brasileña (SBBrasil 2003) y de la Investigación Nacional de la Salud Bucal (SBBrasil 2010). La estimativa de tendencia epidemiológica de la fluorosis en la población de 12 años, aspectos de la confiabilidad de los datos, así como la precisión de las estimativas, fueron evaluadas en estas dos investigaciones. La distribución de la prevalencia de la fluorosis fue hecha de acuerdo con los dominios de estudio (capitales y regiones) y el año estudiado. Se expresaron también los intervalos de confianza (IC95%) para la prevalencia simple (sin considerar las fases de la gravedad). RESULTADOS: La prevalencia de la fluorosis dentaria presentó una variación considerable, de 0 a 61% en 2003 y de 0 a 59% en 2010. Se observaron inconsistencias en los datos en términos individuales (por año y por dominio) y en el comportamiento de la tendencia. Considerando la expectativa de prevalencia y los datos disponibles en las dos investigaciones, el tamaño mínimo de la muestra debería ser de 1.500 individuos para obtener intervalos de 3,4% y 6,6% de confianza, considerando un coeficiente de variación mínimo de 15%. Dada la subjetividad en la naturaleza de su clasificación, exámenes de fluorosis dentaria pueden presentar más variación de los realizados para otras condiciones de salud bucal. El poder para establecer diferencias entre los dominios del estudio con la muestra de SBBrasil 2010 es bastante limitado. CONCLUSIONES: No fue posible analizar la tendencia de la fluorosis dentaria en Brasil con base en los estudios de 2003 y 2010; esos datos son sólo indicadores exploratorios de la prevalencia de la fluorosis. La comparación se hace imposible por el hecho de haber sido utilizado modelos de análisis diferentes en las dos pesquisas. La investigación de la fluorosis dentaria en pesquisas de base poblacional no es viable técnica y económicamente, la realización de estudios epidemiológicos localizados con plan de muestreo es más adecuada.
Resumo:
O Projeto SB Brasil 2010, planejado e executado por órgãos do SUS, nos âmbitos federal, estadual e municipal, e de universidades brasileiras, por meio de Centros Colaboradores do Ministério da Saúde se constitui em recurso de valor estratégico para aprofundar os conhecimentos sobre os agravos bucais no país, e dá contribuição inestimável para orientar os rumos da PNSB e avançar na construção de um modelo de atenção pautado na Vigilância à Saúde
Resumo:
O Projeto SB Brasil 2010, planejado e executado por órgãos do SUS, nos âmbitos federal, estadual e municipal, e de universidades brasileiras, por meio de Centros Colaboradores do Ministério da Saúde se constitui em recurso de valor estratégico para aprofundar os conhecimentos sobre os agravos bucais no país, e dá contribuição inestimável para orientar os rumos da PNSB e avançar na construção de um modelo de atenção pautado na Vigilância à Saúde
Resumo:
Assuming the body as a space of communication and production of subjectivity, we investigate, through the perspective of the contemporary youth at UFRN, the complexity surrounding the act of adorning the body as an act of communication, more precisely a visual communication, filled with symbolism and personality. Using the metaporic method, we seek to follow the communicational act, resulting from the relationship between these unique individuals at UFRN, their adornments and clothing, as an act that produces meaning. Through these narratives and singular expression, observed in these adorned / dressed bodys, we were able to identify seven categories that outlines the collage-individual that we present here: Aesthetic inconsistency and frequent change of style, gender X clothes, spaces regulated by a dominant aesthetic, symbolic connection with garments and / or accessories, the building an authorial image through various aesthetic references, moment of aesthetic rupture with socially established standards, and, parts of the body whose modification or acceptance reflects aesthetic ruptures.
Resumo:
NORO, Luiz Roberto Augusto et al. Incidência de cárie dentária em adolescentes em município do Nordeste brasileiro, 2006, Cadernos de Saúde Pública, Rio de Janeiro, v. 25, n. 4, p. 783-790, abr. 2009.
Resumo:
A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems
Resumo:
The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles
Resumo:
At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process
Resumo:
The aims of this study were to analyze the access of dental services by child population, to determine the prevalence of dental caries, gingivitis and malocclusion in resident children from the municipal district of Sobral Ceará and to evaluate the incidence of the dental decay in adolescents associated with the factors related to socioeconomic condition, access to health services and self-perception. This study had as main factor the multidisciplinary represented by the participation of health professional (doctors, dentists, nurses) in the development of the survey's initial reference; student from Human Sciences area to apply the structured questionnaire in domiciliary visits; statistics professionals in the orientation of the analysis to be held and family health team (community health agents, dentists and dental clinic assistants) in the scheduling of domiciliary visits and the accomplishment of oral exam. The sample was determined from the domicile record that included children born between 1990 and 1994 to develop the research Children health conditions in the municipal district of Sobral Ceará . The first sample comprised 3425 parents of children from 5 to 9 years old, living in the urban area at the municipal district of Sobral Ceará, aiming at identifying the most important factors associated to the access to dental service. From this sample, 1021 children were selected in a systematic way, for the accomplishment to the epidemiological study of decay, gingivitis and malocclusion. In the study's third phase, in order to arrange the group to be followed, 688 adolescents were examined and interviewed, by means of the active search from the 1021 individuals that had been previously examined. It was observed that 50.9% of the children had access to dental service at least once in a lifetime. Of this total, 65.3% accomplished it during the last year, and 85.4% of these did in public services, what allows to identify the importance of this sector in the access to dental services. It was observed that the factors that most affected the access to dental 129 services were related to socioeconomic condition, such as the access to health plan, the possession of toothbrush, garbage collecting, mother s schooling, sewerage treatment and malnutrition. In relation to oral diseases, an increase in the DMF-T index according the age was observed, from 0.10 in five years old to 1.66 in the nine years old, while with the dmf-t index, the inverse happened, since the index decreased from 3.59 in five years old to 2.69 in nine years old. In relation to gingivitis, an average 32.7% of the children presented gum bleeding. In what concerns malocclusion, it was observed that 60.3% of the children didn't present any problem, 30.17% had light malocclusion and 9.5% severe malocclusion. The average incidence of dental caries was 1.86 teeth per youngster. Among the studied variables, tooth pain in the last six months, mother's income and school snack, adjusted by the perception about the need of treatment, the mother's schooling and the dentist's appointment at least once in a lifetime, were the variables that presented positive relationship with the high incidence of dental caries on this population by logistic regression. Variables of socioeconomic nature, related to the access to health services and behavior and biological variables presented a relationship with the high caries incidence. The study point out to the need of developing health actions in a humanized way, by an oral health team effectively bound to the population's interest, with the great objective to provide, with the public health services managers, adequate conditions to improve oral health