Fatores que influenciam a intenção de compra online: aplicação de um modelo adaptado de aceitação da tecnologia para o comércio eletrônico

This research aims to understand the factors that influence intention to online purchase of consumers, and to identify between these factors those that influence the users and the nonusers of electronic commerce. Thus, it is an applied, exploratory and descriptive research, developed in a quantitative model. Data collection was done through a questionnaire administered to a sample of 194 graduate students from the Centre for Applied Social Sciences of UFRN and data analysis was performed using descriptive statistics, confirmatory factorial analysis and simple and multiple linear regression analysis. The results of descriptive statistics revealed that respondents in general and users of electronic commerce have positive perceptions of ease of use, usefulness and social influence about buying online, and intend to make purchases on Internet over the next six months. As for the non-users of electronic commerce, they do not trust the Internet to transact business, have negative perceptions of risk and social influence over purchasing online, and does not intend to make purchases on Internet over the next six months. Through confirmatory factorial analysis six factors were set up: behavioral intention, perceived ease of use, perceived usefulness, perceived risk, trust and social influence. Through multiple regression analysis, was observed that all these factors influence online purchase intentions of respondents in general, that only the social influence does not influence the intention to continue buying on the Internet from users of electronic commerce, and that only trust and social influence affect the intention to purchase online from non-users of electronic commerce. Through simple regression analysis, was found that trust influences perceptions of ease of use, usefulness and risk of respondents in general and users of electronic commerce, and that trust does not influence the perceptions of risk of non-users of electronic commerce. Finally, it was also found that the perceived ease of use influences perceived usefulness of the three groups. Given this scenario, it was concluded that it is extremely important that organizations that work with online sales know the factors that influence consumers purchasing intentions in order to gain space in their market

Fatores que influenciam a intenção de compra online: aplicação de um modelo adaptado de aceitação da tecnologia para o comércio eletrônico

This research aims to understand the factors that influence intention to online purchase of consumers, and to identify between these factors those that influence the users and the nonusers of electronic commerce. Thus, it is an applied, exploratory and descriptive research, developed in a quantitative model. Data collection was done through a questionnaire administered to a sample of 194 graduate students from the Centre for Applied Social Sciences of UFRN and data analysis was performed using descriptive statistics, confirmatory factorial analysis and simple and multiple linear regression analysis. The results of descriptive statistics revealed that respondents in general and users of electronic commerce have positive perceptions of ease of use, usefulness and social influence about buying online, and intend to make purchases on Internet over the next six months. As for the non-users of electronic commerce, they do not trust the Internet to transact business, have negative perceptions of risk and social influence over purchasing online, and does not intend to make purchases on Internet over the next six months. Through confirmatory factorial analysis six factors were set up: behavioral intention, perceived ease of use, perceived usefulness, perceived risk, trust and social influence. Through multiple regression analysis, was observed that all these factors influence online purchase intentions of respondents in general, that only the social influence does not influence the intention to continue buying on the Internet from users of electronic commerce, and that only trust and social influence affect the intention to purchase online from non-users of electronic commerce. Through simple regression analysis, was found that trust influences perceptions of ease of use, usefulness and risk of respondents in general and users of electronic commerce, and that trust does not influence the perceptions of risk of non-users of electronic commerce. Finally, it was also found that the perceived ease of use influences perceived usefulness of the three groups. Given this scenario, it was concluded that it is extremely important that organizations that work with online sales know the factors that influence consumers purchasing intentions in order to gain space in their market

O estado como empregador de última instância: uma proposta de pleno emprego, estabilidade e condições dignas de trabalho para o Brasil

GOMES, Z. B. ; LOURENÇO, André Luís Cabral de . Atuação do Estado como empregador de última Instância: uma proposta para eliminar o desemprego estrutural do Brasil. In: Encontro Nacional de Economia Política, 13. 2008, João Pessoa/PB. Anais... João Pessoa: ENEP, 2008.

Atuação do estado como empregador de última instância: uma proposta para eliminar o desemprego estrutural do Brasil

GOMES, Z. B. ; LOURENÇO, André Luís Cabral de . Atuação do estado como empregador de última instância: uma proposta para eliminar o desemprego estrutural do Brasil. In: Encontro Nacional de Economia Política,13., 2008, João Pessoa/PB. Anais... João Pessoa, 2008.

Crenças normativas e comportamentais e suas influências na intenção de adoção de um sistema de informação: um estudo na área de compras da UFPA

The study aims to identify the factors that influence the behavior intention to adopt an academic Information System (SIE), in an environment of mandatory use, applied in the procurement process at the Federal University of Pará (UFPA). For this, it was used a model of innovation adoption and technology acceptance (TAM), focused in attitudes and intentions regarding the behavior intention. The research was conducted a quantitative survey, through survey in a sample of 96 administrative staff of the researched institution. For data analysis, it was used structural equation modeling (SEM), using the partial least squares method (Partial Least Square PLS-PM). As to results, the constructs attitude and subjective norms were confirmed as strong predictors of behavioral intention in a pre-adoption stage. Despite the use of SIE is required, the perceived voluntariness also predicts the behavior intention. Regarding attitude, classical variables of TAM, like as ease of use and perceived usefulness, appear as the main influence of attitude towards the system. It is hoped that the results of this study may provide subsidies for more efficient management of the process of implementing systems and information technologies, particularly in public universities

Política pública para o idoso : um estudo da cidadania no grupo cabelos de neve do programa conviver em Campina Grande-PB

The main objective of the study about the citizenship development in elderly attended by the Conviver Program of the City Hall of Campina Grande in Paraiba, Brazil was to evaluate how the actions of the Program contribute for the citizenship practice according to the users. The Citizenship analyzed is the existence of political, civil and social rights according to Marshall. For that it was utilized a descriptive research and a study of case based on technical procedure. The research was settled by the people who are benefited by the Conviver Program of the Snow Hair Group and the sample was formed by the active participants that it is in the Group for over ten years, corresponding to a total of ten elderly. For the data collection was utilized basic questionnaire in function of the low schooling of the interviewed, according to Marshall (2002) theory about the citizenship construction from each person. It was utilized the methodological procedure proposed by Bardin (2006), categorical analysis, in the qualitative data analysis, that was divided in four parts. In relation to Political Rights, noted that the program has stimulated your Watched on the exercise of voting and being voted. On the Civil Rights was observed that the Program has given incentive to actions which provide the users the justice rights in and in occupational activities as a job. In relation to Social Rights it was observed that the Conviver Program has contributed in order that its users can lead their lives according to the standards imposed by the society, which have being failed in the education area. As for the type of citizenship it was verified that the Program has given incentive to the served users, becoming more evidence on the speech basis

Estrutura e dinâmica do fitoplânctone bacterioplâncton em cultivos de camarão no Rio Grande do Norte-Brasil: impacto sobre o ambiente natural

This work aimed to study the structure and dynamic of Phytoplankton and Bacterioplankton in a complete cycle of shrimp cultivation (Litopenaeus vannamei) and determine the environmental factors responsible for the structural changes of these communities. The study was realized in a saltwater shrimp farm (Macaíba, RN), between September/2005 and February/2006, and in a freshwater shrimp farm (Ceará Mirim, RN), between May/2007 and September 2007. The samplings were collected weekly in saltwater farm and every fifteen days in freshwater farm. Total phosphorus, chlorophyll a and environmental parameters (pH, dissolved oxygen, salinity, temperature, depth and water transparency) were measured. Qualitative and quantitative analysis of the phytoplankton and bacterioplankton were carried out. The Shannon-Wiener ecologic indexes of diversity and the Pielou equitability indexes were calculated to the phytoplankton. Bacterial density was determined by epifluorescence microscopy. The data were statistically analyzed by Pearson correlation and t-Test. Chlorophycea were predominat in salt water and in the captation/drainage point (24 to 99%). Diatoms had higher wealth. The species Choricystis minor had the highest occurrence (100%) and dominance (90-100%), thus showing its adaptation to the high temperatures, salinity and low water transparency conditions. Filamentous Cyanobacteria like Oscillatoria sp., Pseudoanabaena sp. and Phormidium sp. had constant levels. The negative correlation between chlorophycea and water transparency, and the positive correlation between chlorophyll a and salinity, showed that the phytoplankton was well adapted to the low transparency and to the high salinity. The bacterioplankton was negatively correlated with the total phosphorus and salinity. In freshwater, Cyanobacteria were predominant (>80%), presenting some producers of toxins species like Microcystis sp., Aphanizomenon sp., Cylindrospermopsis raciborskii e Anabaena circinalis. Cyanobacterial density and total phosphorus and chlorophyll a concentrations exceeded the maximum value allowed by legislation. The means of total phosphorus varied from 264 to 627 Wg.L-1 and the means of chlorophyll a oscillated between 22 and 182 Wg.L-1. The phytoplankton species were selected by low availability of the light, high pH, temperature and high availability of total phosphorus. The bacterioplankton showed high densities (5,13 x 107 to 8,50 x107 Bac.mL-1). The studied environments (ponds and rivers) presented a high level of trophic state based on the high concentrations of chlorophyll a and total phosphorus and cyanobacteria dominance. The composition of species in the ponds and rivers was similar, as well as high concentrations of total phosphorus and chlorophyll a, highlighting the pollution caused by the discharges of the farms in natural environment

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Análise do desempenho de um queimador infravermelho funcionando com gás liquefeito de petróleo e glicerina

The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with greater control of emissions due to the passage of exhaust gases through a macro-porous ceramic bed. This paper presents an infrared burner commercial, which was adapted an experimental ejector, capable of promoting a mixture of liquefied petroleum gas (LPG) and glycerin. By varying the percentage of dual-fuel, it was evaluated the performance of the infrared burner by performing an energy balance and atmospheric emissions. It was introduced a temperature controller with thermocouple modulating two-stage (low heat / high heat), using solenoid valves for each fuel. The infrared burner has been tested and tests by varying the amount of glycerin inserted by a gravity feed system. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by a data acquisition system which recorded real-time measurements of the thermocouples attached. The burner had a stable combustion at levels of 15, 20 and 25% of adding glycerin in mass ratio of LPG gas, increasing the supply of heat to the plate. According to data obtained showed that there was an improvement in the efficiency of the 1st Law of infrared burner with increasing addition of glycerin. The emission levels of greenhouse gases produced by combustion (CO, NOx, SO2 and HC) met the environmental limits set by resolution No. 382/2006 of CONAMA

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

A representação social do cuidado no Programa Saúde da Família na cidade do Natal

The aim of this study was to learn about the social representations of the care provided by the Family Health Program (FHP) in the city of Natal, Brazil and determine how these representations guide the daily actions of doctors, dentists, nurses, nurse s assistants and oral health assistants during the work process. In this sense, we used the theoreticalmethodological approach to the Theory of Social Representations. For data collection, we used the following instruments: a two-part questionnaire, where the first part recorded sociodemographic data and the second part was adapted to the free word association technique (FWAT), which was applied to 90 professionals belonging to 18 FHP units. Interviews were also used as collection instruments. These were based on inductive stimuli and on direct observations of 30 of these professionals. After a superficial reading of the material, we constructed a corpus from which ten categories emerged. To analyze FWAT we used lexicographic analysis, combining frequency and the mean order of responses. The interviews and sociodemographic variables were analyzed using content analysis and descriptive statistical analysis, respectively. The study showed that the central nucleus of the social representation in question is composed of the elements attention, receptivity and love, revealing that the subjects have different understandings of the FHP care process and that the knowledge accumulated in this respect is supported by an approximate vision of the meaning of care. However, traditional elements with trivializing connotations about care predominate, which compromises the development of strategies to overcome traditional practices. In the set of analyses, we were able to capture the invariance of a contradiction: on one hand, professionals know and affirm the importance of providing care for FHP patients; on the other, the experience of daily practice translates into the negation of this concept. In this contradictory context, professionals build gradual and successive syntheses that allow them to act and affirm themselves by associating information from their academic formation, structured knowledge acquired in other experiences, values and symbols of their daily routine. Thus, they shape and reshape themselves, according to what is concretely and specifically required, at the same time both plural and multiple. The composition of the central nucleus indicates that any measure that intends to modify attitudes that is, the daily actions of FHP professionals with respect to care must take into account and give priority to the debate about the redefining of the semantic fields of the central nucleus (love/attention/receptivity and humanization), especially those of love and attention

Voleibol brasileiro : parâmetros fenotípicos e genotípicos na seleção de atletas

Objective: Identify phenotype and genotype parameters of female volleyball players at different performance levels to help in player selection. Methods: We identified characteristics of phenotype and genotype using the somatotype method (Heath Carter); anthropometry (weight, height and fat percentage); dermatoglyphics (Cummins and Midlo s method) as well as applying physical quality tests (Shuttle Run to assess agility and the Sargent Jump Test adapted for spike and block reach). The sample was composed of 179 players (54 from national teams and 125 from state teams). Results: Somatotype was similar among the performance levels in the mesomorphic component. The Height and ectomorphic component were greater in national team players as was spike and block reach. The vertical jump height for the spike was similar between the national under-17 team and the state teams observed, but in the block jump the lower level players were better. The dermatoglyphics characteristics identified were similar among the groups studied. Conclusions: The results of the variables studied show that somatotype, height, spike reach and block reach are fundamental parameters in player selection and in the specific characteristics of each game position of this sport. This paper proposes a multidisciplinary approach applicable in the fields of physical education, medicine and nutrition

Tradução, adaptação e validação da versão brasileira do questionário utian quality of life (uqol) para avaliação da qualidade de vida no climatério

The present study had as objective translates, to do equivalence and validation of the Utian Quality of Life (UQOL) for the Brazilian population through methods internationally accepted, in which the original questionnaire was translated for the Portuguese by three teachers and the consensual version was translated back for English by two American teachers (back translation). A multidisciplinary committee evaluated all versions and the final version in Portuguese was applied to climacteric women for the process of adaptation. Validation of the instrument was performed by measuring the reliability and validity properties. Construct validity was examined through the comparison between UQOL and the general measuring scale of quality of life Short Form-36 (SF-36). The final version of translation process was easily recognized by the target population, that didn't tell understanding problems. The results obtained for the reliability intra and interobserver showed significant agreement in all of the subjects. The construct validity was obtained through correlations statistically significant among the domains occupational, health and emotional of UQOL with the SF-36 domains. For the exploratory factorial analysis, it was verified that three factors explain 60% of the total variance of the data, the present study allowed concluding that UQOL was appropriately translated and adapted for applicability in Brazil, presenting high reliability and validity. In that way, the executed project provided the involvement of different areas as gynecology, psychology and physiotherapy (interdisciplinary). Thus, this instrument can be included and used in Brazilian studies to assessment the quality of life during the climacteric years

ANÁLISE COMPARATIVA DO CONHECIMENTO, ATITUDES E PRECONCEITOS DE UNIVERSITÁRIOS DOS CURSOS DE PEDAGOGIA, EDUCAÇÃO FÍSICA E MEDICINA EM RELAÇÃO À EPILEPSIA

Epilepsy is a chronic disorder of the central nervous system, most frequently characterized by abnormal electrical impulses in the brain. It is the oldest recorded neurological disease and has been surrounded by myths, mistaken beliefs and preconceptions. Three professionals work with epileptic patients on a daily basis: teachers, physical educators and physicians . This study aimed to analyze and compare the level of knowledge, preconceptions and attitudes of undergraduate students in the courses of Pedagogy, Physical Education and Medicine, future professionals who will deal with epileptic patients. This descriptive observational study was conducted with 286 university undergraduates of both sexes (women 99/34.6% and men 187/65.4%) from the first to fourth year of Pedagogy, Physical Education and Medicine courses at the Universidade Estadual Rio Grande do Norte (UERN), with mean age of 23 years. A validated and adapted 17-question questionnaire, divided into nine knowledge-based questions, five related to preconceptions and three on attitudes, was applied. Results allowed elaboration of a manuscript entitled Comparative Analysis of Knowledge, Attitude and Preconceptions in University Undergraduates of Pedagogy, Physical Education and Medicine Courses in Relation to Epilepsy. The findings of this article show that knowledge of epilepsy in the three groups is very satisfactory. The low level of preconception indicates that educational or clarifying information is being transmitted, albeit by television, a layman s information vehicle, which has undoubtedly contributed to reducing the stigma of epilepsy through educational information. Results also suggest a lack of knowledge on how to act during a seizure, especially in education professionals. Although there are limitations in our sample, the relevance and contribution of this study is to call attention to the importance and need for these future professionals to be informed and learn correct attitudes with respect to epilepsy during their academic formation. This is essential at a time when the disease is being brought out of the shadows. This research was supported by the Office of the Dean of Teaching, and Deans of Pedagogy, Physical Education and Medicine at UERN. The research was made possible by the multidisciplinary interaction among a physical educator, child neurologist and statistician, all contributing to achieving the aims set out here

Vocabulário técnico e formação dos profissionais da área têxtil: necessidade, elaboração e avaliação de um dicionário de terminologia do vestuário

This research work deals with the compilation of a dictionary on clothing terminology intended to be used as a pedagogic tool as part of the teaching and learning process in the Textile Engineering Course at the Federal University of Rio Grande do Norte. The main terms were selected and assessed by a team of textile teachers and students with the objective to be structured as a conceptual body of information on the following sub-areas of clothing terminology: materials (fabrics and trimmings) and products (garments). This research comprises three main steps: (a) characterization and understanding of the technical vocabulary in the clothing area as well as the identification of a pedagogic demand for a dictionary on clothing terminology, clearly expressed by the textile lecturers and students involved in the assessment of the need and validation of this project development; (b) a proposal for a specific methodology for the compilation of the dictionary which could help the communication process in the lecturing of clothing terminology and (c) based on the terminological principles and the technique of focal groups the dictionary was assessed. The technique of focal groups was used in the first step. In the second step the technique used was that of the terminological methodology adapted to the teaching approach in the Textile Course. In the third step the technique of focal groups was again utilized. It was observed that the main concern of lecturers and students is the lack of a standardized vocabulary, which renders difficult the communication process in both the teaching and learning activities as well as the professional ones in the textile industries. Various aspects, which can overlap, cause this lack of standardization. The main ones pointed out by the study team in the focal groups are: usage of regional words or expressions, usage of foreign words or expressions, analogies, and the low level of formal education, mainly among the industry workers. Another aspect to be considered is the lack of textile literature written in the Portuguese language of Brazil. This evidence shows the importance of a clothing terminology dictionary which will benefit both the education and professional activties in this field of knowledge. This dictionary will also give a substantial contribution to terminological standardization in our research field. With view to fulfill this demand, a dictionary of clothing terminology was compiled with 760 main entries, according to the modern practice in terminology with the necessary modifications concerning our needs. The result of the dictionary assessment was very assertive regarding its structure, contents and possible use in various contexts. The team work emphasized their contribution to the standardization process of the terms that proved to be one of the most important and difficult aspects of this researh work. The significance of this structured terminological dictionary was confirmed by the focal group participants relating to its use for teaching and learning activities, as a reference book, as a source of technical information and also as a tool for pedagogic studies and planning, as well as a significant collaboration to the pedagogic practices in the textile engineering course at University or any other educational institution. Besides, this dictionary can also be used to supply information within the textile field. We are aware that the present work will not exhaust the objectives of this research due to its limitations in opposition to the vast complexity demanded by the compilation of a complete work including all the areas and sub-areas of textile engineering. However, it is an important source for dissemination of concepts on the field of clothing terminology and a tool to effective standardization of the terms used in this subject field