34 resultados para Cassava flour
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
This research argues about the mathematical knowledge built in the tradition of the cassava flour production, seeking to analyse these mathematical knowledge in the perspective of the categories of time and measure, built and practiced in the flour production, located in Serra do Navio and Calçoene, in Amapá - Brazil. The following work discuss the identification and the description of the mathematics during the production activities of the flour, where is presented elements related to generation and transmission of the traditional knowledge, which is the basis for maintenance of the tradition of the flour, characterizing the research as an Ethnomathematic study. The methodological procedures highlight ethnographical techniques and elements that characterize the participating observation. The results obtained showed us that the flour workers articulate some length, area and volume measure due to own and traditionally acquired systems, which is apprehended and countersigned by other kind of culturally established system; thus they relativism the measures systems and the official calendars. And it lifts as one of the main proposal that the academic mathematics and the tradition establish knowledge make conjunction of the both knowledge, that is important for a possible reflection and application in the construction of a pedagogical practice in mathematical education, trying to establish points of socio-economic and cultural mark
Resumo:
This study evaluates the biosurfactants production from cassava wastewater, an agro industrial residue, to be used as carbon source. Using a factorial design 24-1 (half fraction), 10 tests were performed using Pseudomonas aeruginosa AP029/GVII-A in submerged batch cultivation in rotating incubator (shaker). The influence of factors (temperature, agitation, aeration ratio and concentration of cultivation medium) at two different levels for the synthesis of the biosurfactant. Samples were collected throughout the cultivation by 132 hours of fermentation were completed. The best outcome was intended by following production through substrate consumption, dry matter, reduction of surface tension (ring method) and emulsification index. The kinetics of microorganism was assessed for the carbon source used. The results showed that the cassava wastewater is a well assimilable substrate for the production of biotensoactive, reaching 91 % of consumption by the micro-organism under study. The growth temperature was found to be one of the leading factors in the synthesis of the metabolite, followed by aeration and also due to the agitation. The best results showed a 30 % reduction in surface tension (% RTS) for the environment, reaching values of 30 mN/m; 3.0 g /L of biomass and emulsifying index greater than 65 %. The metabolite synthesized still remained stable for different salt concentrations (1, 5 and 10 % w/ v) and alkaline pH (8-10).
Resumo:
Quilombo communities remaining are groups marked by insufficient public assistance and characterized by living in rural and conducting economic activities such as agriculture. The development on a sustainable basis is important to ensure strategies for economic growth and environmental preservation. This work aims to study the remaining Quilombo Capoeira Black community, located in the municipality of Macaíba, Rio Grande do Norte, considering the principles of sustainable development. Attempt to respond to what level such community can be considered sustainable from an analysis of their social practices. The methodological procedures used consisted of a literature review and documentary, questionnaires, conducting semi-structured interviews and direct observation. The final results show that the family farm has characteristics that approximate the principles of sustainable development, including the diversification of labor, food production with less environmental damage and strengthening the rural environment, and indicate that the main economic activities practiced in Capoeira dos Negros community are agriculture, manufacturing of cassava flour and brick manufacturing, which, in turn, are linked to negative environmental impacts, such as sedimentation pond, groundwater contamination, air pollution and soil erosion. What lead to the conclusion that the social practices of the community are not in line with the dimensions of sustainable development. It is hoped that the survey results provide subsidies for development and implementation of public policies
Resumo:
Brazil is the world's second largest producer of cassava, which most of the production is used to make flour and starch, generating large amounts of waste, cassava. In general, this waste is disposed of directly into the soil and waterways, causing serious environmental impacts. In view of this, the aim of this work was to evaluate the use of cassava wastewater water (cassava) as organic fertilizer in Brachiaria brizantha pasture. Marandu. The experiment was conducted at the Campus Macaíba the Federal University of Rio Grande do Norte. The treatments were increasing rates of cassava, applied to the soil as organic fertilizer. The experimental design was a randomized block design with six treatments and four replications. The treatments consist of cassava doses (0, 15, 30, 60 and 120 m³ ha- 1 ) and a treatment with mineral fertilizer (AM) in the form of NPK (140: 30: 120 kg ha-1 ). Three cuts with an interval of 60 days were carried out. The variables evaluated were: plant height; accumulation of morphological components of fodder; Trapping Light (IL); Leaf Area Index (LAI); Total chlorophyll (CT); Feature Production Seca (PMS). The dry matter production at a dose of 120 m³ha-1 had a quantitative increase, with a total production in 2796 kg ha-1 DM in the second cut, providing an increase of 493% compared to control, and the residual effect observed in the third cut caused a 100% increase compared to 0 m³ ha-1 . Comparing the PMS obtained with the use of AM and other treatments it was observed that it was the second cut equivalent to a dose of 120 m³ ha-1 and the third equivalence has been cut at doses 60 and 120 m³ha-1. For the variables plant height, IL, IAF, CT and leaves Mass adding cassava in the soil promoted a positive linear increase for the three cuts. However, with the AM the IAF was superior to the other treatments. The thatched mass reached its highest production (838 kg ha-1 DM) in the second cut when using a dose of 120 m³ha-1 . In dead material mass in the second and third sections, there was increased linearly increased total of 322 and 452% respectively, compared to a dose of 0 m³ha-1 . The use of cassava showed herbicidal effect for the variable mass of the undesirable negative linear response resulting in decreasing the amount of residue with increasing doses. Manipueira can be used as organic fertilizer in Brachiaria brizantha cv. Marandu for improvements in the productive characteristics, as promoted significant increases in 8 most of the variables studied, especially at a dose of 120 m³ha-1 . This benefits the environment by being alternative for disposal of cassava.
Resumo:
The indigenous political scene in Brazil is undergoing transformations that need to be better analyzed by scholars in the field of the Social Sciences. The deficit in the policy of indigenous land demarcation emerges as the largest obstacle in the conquest of collective rights. Therefore, a study to analyze renewed strategies in the struggle for social rights, and their implications in local everyday life relations, is urgent. In this context, the aim of this research is to understand the current social dynamics of identity among the Tremembé people of Almofala, in the state of Ceará, Brazil, with a fieldwork conducted in the flour mill of the Casa de Farinha Comunitária project, in the Lameirão community. Specific aims are: a) to analyze the processes involved in the project in order to comprehend their meanings and appropriations as well as their everyday life and political uses; b) understand the strategies to fight for social benefits; c) analyze the local ethnic classifications grounding the construction of the Tremembé identity in Almofala. Methods deployed are ethnography of communities, used to apprehend the social production of networks of relationships, and a social cartography of practices. The realization of rights demanded by the indigenous populations in Brazil is intertwined with a process of social and legal legitimation their identity and cultural heritage. Such legitimation works as a safeguard mechanism of rights secured by the Constitution. Therefore, to own a “cultural heritage” is perceived as a “passport” to benefit from emerging rights. Amid this context, changes in the traditional processing of the cassava root, a productive practice shared locally by diverse social groups, is reified as cultural heritage by the Tremembé people of Almofala and their network of collaborators in the pursuit of accessing distinctive public policies. Furthermore, the research came across specific social arrangements of local subjects which unfolded internal struggles, enabling to understand the dynamics of the Tremembé of Almofala identity process.
Resumo:
Linseed is an important oilseed consumed raw as nutritional supplement, that although represents a rich source of nutrients, its nutritional value could be impaired due to the presence of antinutritional factors. In this study, protein fractions from raw linseed flour were extracted and isolated being obtained 12% of albumins, 82% of globulins, 5% of glutelins and 1% of prolamins. These proteins were visualized by SDS-PAGE and albumins showed low molecular mass protein bands around 21 kDa and minor bands, similar to that of trypsin inhibitor; Globulins presented protein bands with high molecular masses, which possibly are constituents of multimeric proteins, such as legumins. After determination of the centesimal composition of raw linseed, it was used as exclusive protein source for young rats to evaluate its effect on animal growth. The results showed negative effects on rat growth (weight gain 73% less than the control group) and reduction of intestinal villus (35%), that could be related with in vitro and in vivo globulin digestibility and proteinaceous antinutritional factors (mammalian digestive enzymes inhibitors and lectins) in albumin fraction. Native globulins showed, by SDS-PAGE, low susceptibility in vitro to trypsin and chymotrypsin, however presented high degradation by pancreatin. Thermal treatment of globulins for 5 and 15 minutes at 100ºC improved considerably its digestibility by trypsin and pancreatin. Globulins presented 93.2% in vivo digestibility, similar to the control protein. Albumin fraction had high trypsin inhibition activity (100%) and chymotrypsin inhibition of 28.3%; haemagglutinating activity was not detected. The results of this study indicate the negative action of trypsin inhibitors on animal growth, but can not be discarded its combined action with other antinutritional factors, which could compromise the raw linseed utilization as an alternative food
Resumo:
The corn cob is an agricultural by-product still little used, this in part due to the low knowledge of the biotechnological potential of their molecules. Xylan from corn cobs (XSM) is a polysaccharide present in greater quantity in the structure of plant and its biotechnology potential is little known. This study aimed to the extraction, chemical characterization and evaluation of biological activities of xylan from corn cobs. To this end, corncobs were cleaned, cut, dried and crushed, resulting in flour. This was subjected to a methodology that combines the use of alkaline conditions with waves of ultrasound. After methanol precipitation, centrifugation and drying was obtained a yield of 40% (g/g flour). Chemical analysis indicated a high percentage of polysaccharides in the sample (60%) and low contamination by protein (0.4%) and phenolic compounds (> 0.01%). Analysis of monosaccharide composition indicated the presence of xylose:glucose:arabinose:galactose:mannose:glucuronic acid in a molar ratio 50:20:15:10:2.5:2.5. The presence of xylan in the sample was confirmed by nuclear magnetic resonance (¹H and ¹³C) and infrared spectroscopy (IR). Tests were conducted to evaluate the antioxidant potential of XSM. This showed a total antioxidant capacity of 48.45 EAA/g sample. However, did not show scavenging activity of superoxide and hydroxyl radical and also reducing power. But, showing a high capacity chelating iron ions with 70% with about 2 mg/mL. The ability to XSM to influence cell proliferation in culture was also evaluated. This polymer did not influence the proliferation of normal fibroblast cells (3T3), however, decreased the rate of proliferation of tumor cells (HeLa) in a dose-dependent, reaching an inhibition of about 50% with a concentration around 2 mg/mL. Analyzing proteins related to cell death, by immunoblotting, XSM increases the amount of Bax, Bcl-2 decrease, increase cytochrome c and AIF, and reduce pro-caspase-3, indicating the induction of cell death induced apoptosis dependent and independent of caspase. XSM did not show anticoagulant activity in the PT test. However, the test of activated partial thromboplastin time (aPTT), XSM increased clotting time at about 5 times with 600 μg of sample compared with the negative control. The presence of sulfate on the XSM was discarded by agarose gel electrophoresis and IR. After carboxyl-reduction of XSM the anticoagulant activity decreased dramatically. The data of this study demonstrate that XSM has potential as antioxidant, antiproliferative and anticoagulant compound. Future studies to characterize these activities of XSM will help to increase knowledge about this molecule extracted from corn and allow their use in functional foods, pharmaceuticals and chemical industries.
Resumo:
The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures
Resumo:
One of the major challenges faced nowadays by oil companies is the exploration of pre-salt basins. Thick salt layers were formed in remote ages as a consequence of the evaporation of sea water containing high concentrations of NaCl and KCl. Deep reservoirs can be found below salt formations that prevent the outflow of oil, thus improving the success in oil prospection. The slurries used in the cement operations of salt layers must be adequate to the properties of those specific formations. At the same time, their resulting properties are highly affected by the contamination of salt in the fresh state. It is t herefore important to address the effects of the presence of salt in the cement slurries in order to assure that the well sheath is able to fulfill its main role to provide zonal isolation and mechanical stability. In this scenario, the objective of the present thesis work was to evaluate the effect of the presence of NaCl and KCl premixed with cement and 40% silica flour on the behavior of cement slurries. Their effect in the presence of CO2 was also investigated. The rheological behavior of slurries containing NaCl and KCl was evaluated along with their mechanical strength. Thermal and microstructural tests were also carried out. The results revealed that the presence of NaCl and KCl affected the pozzolanic activity of silica flour, reducing the strength of the hardened slurries containing salt. Friedel´s salt was formed as a result of the bonding between free Cl- and tricalcium aluminate. The presence of CO2 also contributed to the degradation of the slurries as a result of a process of carbonation/bicarbonataion
Resumo:
Steam injection is the most used thermal recovery method of oil nowadays because of the high degree of development of the technique that allows high recovery factors. However, injection of superheated steam into the reservoir affects the entire structure of the well, including the cemented layer that presents a retrogression of compressive strength and increases the permeability due to formation of more crystalline and denser phases at temperatures above 110 °C. These changes result in failures in the cement that favor the entrance of formation fluids into the annulus space resulting in unsafe operations and restrictions in the economic life of the well. But the strength retrogression can be prevented by partial replacement of cement by silica-based materials that reduce the CaO/SiO2 ratio of cement slurries changing the trajectory of the reactions, converting those deleterious phases in phases with satisfactory mechanical strength and permeability. The aim of this study was to evaluate the behavior of a ceramic waste material rich in silica in partial and total substitution of a mineral additive used to fight the strength retrogression of cement slurries subjected to high temperatures. The evaluation was made by compression, X-ray diffraction (XRD) and thermogravimetry (TG/DTG). The samples were submitted to a cycle of low temperature (38 °C) for 28 days and a cycle of low temperature followed by exposure to 280 ºC and 1000 psi by 3 days. The results showed that slurries with additions of up to 30% of the waste material are not enough to prevent the strength retrogression, while slurries with additions of the waste material combined with silica flour in various proportions produced hydrated products of low Ca/Si ratios that maintained the compressive strength at satisfactory levels
Resumo:
The production of heavy oil fields, typical in the Northeastern region, is commonly stimulated by steam injection. High bottom hole temperatures are responsible not only for the development of deleterious stresses of the cement sheath but also for cement strength retrogression. To overcome this unfavorable scenario, polymeric admixtures can be added to cement slurries to improve its fracture energy and silica flour to prevent strength retrogression. Therefore, the objective of the present study was to investigate the effect of the addition of different concentrations of polyurethane (5-25%) to cement slurries containing 40% BWOC silica flour. The resulting slurries were characterized using standard API (American Petroleum Institute) laboratory tests. In addition to them, the mechanical properties of the slurries, including elastic modulus and microhardness were also evaluated. The results revealed that density, free water and stability of the composite cement/silica/polyurethane slurries were within acceptable limits. The rheological behavior of the slurries, including plastic viscosity, yield strength and gel strength increased with the addition of 10% BWOC polyurethane. The presence of polyurethane reduced the fluid loss of the slurries as well as their elastic modulus. Composite slurries also depicted longer setting times due to the presence of the polymer. As expected, both the mechanical strength and microhardness of the slurries decreased with the addition of polyurethane. However, at high bottom hole temperatures, the strength of the slurries containing silica and polyurethane was far superior than that of plain cement slurries. In summary, the use of polyurethane combined with silica is an interesting solution to better adequate the mechanical behavior of cement slurries to heavy oil fields subjected to steam injection
Resumo:
Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT
Resumo:
Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients
Resumo:
Blood constituents labelled with technetium-99m (99mTc) has been used with radiobiocomplexes in several procedures in nuclear medicine. Some natural and sintetic drugs are capable to interfere on the labeling of blood constituents with 99mTc, on the morphology of red blood cells (RBC) and on the biodistribution of radiobiocomplexes. The aim of this study was evaluate the effect of an extract of Passiflora edulis f. flavicarpa on the labeling of blood constituints with 99mTc, on the morphology of RBC and on the biodistribution of the radiopharmaceutical sodium perthecnetate in Wistar rats. On the in vitro studies the Passiflora edulis f. flavicarpa decreased significantly (p<0.05) the %ATI on plasma proteins and on the in vitro morhology of RBC, the passion fruit peel flour altered the shape and the perimeter/área ratio. On the in vivo estudies the extract did not altered the %ATI in blood constituents, and did not altered the shape of RBC. Although, on the biodistribution of the radiobiocomplex sodium perthecnetate (Na99mTcO4) this extract decreased significantly (p<0.05) the uptake in duodenum, spleen, pâncreas and blood, and increased the uptake in stomach. It can be suggested that the effects presented by this extract could be a result of some substances contained in this extract that could alter the binding of 99mTc to plasma proteins, the morphology of RBC and the biodistribution of the radiobiocomplex sodium perthecnetate. This study was multidisciplinary experimental research. It was developed with the contribution of different Departments and Services of the Hospital Universitário Pedro Ernesto of the Universidade Estadual do Rio de Janeiro
Resumo:
Farming of marine shrimp is growing worldwide and the Litopenaeus vannamei (L. vannamei) shrimp is the species most widely cultivated. Shrimp is an attractive food for its nutritional value and sensory aspects, being essential the maintenance of this attributes throughout storage, which takes place largely under freezing. The aim of this research was to evaluate quality characteristics of Litopenaeus vannamei shrimp, during freezing storage and to verify the effect of rosemary (Rosmarinus officinalis) adding. Considering the reutilization of processing shrimp wastes, total carotenoids analysis were conducted in waste of Litopenaeus vannamei shrimp and in the flour obtained after dryer. Monthly physicochemical and sensorial analysis were carried out on shrimp stored at 28,3 ± 3,8ºC for 180 days. Samples were placed in polyethylene bags and were categorized as whole shrimp (WS), peeled shrimp (PS), and PS with 0,5% dehydrated rosemary (RS). TBARS, pH, total carotenoid and sensorial Quantitative Descriptive Analysis (QDA) were carried out. Carotenoid total analysis was conducted in fresh wastes and processed flour (0 day) and after 60, 120 and 180 days of frozen storage. After 180 days, RS had lower pH (p = 0.001) and TBARS (p = 0.001) values and higher carotenoids (p = 0.003), while WS showed higher carotenoid losses. Sensory analysis showed that WS were firmer although rancid taste and smell were perceived with greater intensity (p = 0.001). Rancid taste was detected in RS only at 120 days at significantly lower intensity (p = 0.001) than WS and PS. Fresh wastes had 42.74μg/g of total carotenoids and processed flour 98.51μg/g. After 180 days of frozen storage, total carotenoids were significantly lower than 0 day (p<0,05). The addition of rosemary can improve sensory quality of frozen shrimp and reduce nutritional losses during storage. Shrimp wastes and flour of L. vannamei shrimp showed considerable astaxanthin content however, during storage it was observed losses in this pigment