Diversidade de macroalgas marinhas bentônicas dos recifes de Maracajaú, área de preservação ambiental dos recifes de corais, Rio Grande do Norte, Brasil

Despite the importance of coral reefs to humanity, these environments have been threatened throughout the world. Several factors contribute to the degradation of these ecosystems. The Maracajaú Reef Complex, in Rio Grande do Norte state is part of the Coral Reefs Environment Preservation Area in northeastern Brazil. This area has been receiving an increasing influx of tourism and the integrity of the local reefs is a matter of concern. In this study, the reef macroalgae communities were studied and compared within two areas distinguished by the presence or absence of tourism activities. Two sample sites were chosen: the first one, where diving activities are intense; and the other, where these practices do not occur. Samples were collected at both sites within a quadrate of 625 cm2 of area randomly thrown 5 times along a 10 meters transect line. Richness, Shannon-Hill diversity and Simpson dominance indices were determined based on biomass data. Similarity between sites was analyzed with Bray-Curtis similarity and distance index. Fifty-eight macroalgae species were observed, including 7 Chlorophyta, 13 Phaeophyta and 38 Rhodophyta. In the non-disturbed site, 49 species were found, while at the disturbed site, there were 42 species. Dictyotaceae and Corallinaceae were the most representative families at the non-disturbed site, and Rhodomelaceae and Dictyotaceae at the disturbed site. The non-disturbed site presented a higher biomass and the greatest richness and diversity indices. In the disturbed site the dominance index was greater and Caulerpa racemosa was the dominant species. The dendogram based on similarity index showed two major clusters, and an isolated element at the center that corresponds to a sample from the disturbed site. In the first cluster, samples from the non-impacted site were predominant and fleshy brown algae were more conspicuous. The second cluster was composed primarily of samples from the impacted site, where C. racemosa and red filamentous and erect calcareous algae associations (turf forming) were observed covering large extensions. These associations are represented by groups of algae adapted to environments where disturbances are frequent. They can grow rapidly on substrate where benthic community was removed and do not allow the establishment of other species. The results of the present study show that tourism activity is an impacting factor that has been causing shifts in macroalgae communities in the Maracajaú Reef Complex

Estudo da adesão de pinos endodônticos modificados superficialmente por plasma de oxigênio

The work presents the effect of plasma treatment when applied in fibers or carbon/glass posts in the adhesion fiber/resin and posts/cement. This has for objective the modification of the surface of the fibers, as well as the wettability of the posts, seeking the improvement of the adhesion and of the connection fiber/resin in the processing of polymeric composites reinforced with the same ones. 120 posts (Reforpost) were used and 30 meters of fibers of carbon and of glass (Fibrex), of the company Angelus. The samples were divided in three groups of 40 specimens: GROUP I - 20 posts of glass fiber and 20 of carbon without treatment to it shapes, GROUP II -20 posts of glass fiber and 20 of carbon treated to it shapes in the surface and GROUP III - 20 posts of glass fiber and 20 of carbon make with fibers in natura after plasma treatment. The plasma treatment was accomplished with oxygen and with temperature in the camera fixed at 200°C, for one hour of exhibition. The posts and the fibers were characterized before and after the treatment. The wettability was measure by pendent drop method, and interface fiber/resin and posts/cement were observed by optical and electronic microscopy. It was observed that both wettability and texture were increased with plasma treatment

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Caracterização batimétrica e fisicooceanográfica do canal de acesso ao porto de Cabedelo/PB: uma análise ambiental ao derrame de óleo

The State of Paraíba is one of the most dynamic states of Brazil, strategically located in the northeast, is notable for the excellent potential for integration of different transportation modes forming the states of Rio Grande do Norte, Pernambuco and Alagoas. The dynamic that occurs with port activity causes changes in the space where it is installed. And the elements of this space are always more than suffering direct or indirect influences as the flow in the port is expanded. Therefore, this region became subject to the accidental spillage of oil, because it presents a heavy traffic of ships of various sizes that can run aground or collide with oil causing accidental events. The study of geomorphological and sedimentological compositions of seafloor becomes important as more is known about the relationships between these parameters and associated fauna, and can identify their preferred habitats. The database background, acoustically collected along the proposed study area, is a wealth of information, which were duly examined, cataloged and made available. Such information can serve as an important tool, providing a geomorphological survey of the sedimentary area studied, and come to subsidize, in a flexible, future decision making. With the study area Port of Cabedelo, Paraíba - Brazil, this research aimed to evaluate the influence of the tidal surface and background in modeling the seabed, including the acquisition of information about the location of submerged rocky bodies and the depth of these bodies may turn out to be natural traps for the trapping of oil in case of leaks, and obtain the relationship between types of bed and the hydrodynamic conditions present in the region. In this context, for this study were collected bathymetric data (depth) and physical oceanographic (height of water column, water temperature, intensity and direction of currents, waves and turbidity), meteorological (rainfall, air temperature, humidity, winds and barometric pressure) of the access channel to the Port of Cabedelo / PB and its basin evolution (where the cruise ships dock), and includes tools of remote sensing (Landsat 7 ETM +, 2001), so that images and the results are integrated into Geographic Information Systems and used in the elaboration of measures aimed at environmental protection areas under the influence of this scale facilities, serving as a grant to prepare a contingency plan in case of oil spills in the region. The main findings highlight the techniques of using hydroacoustic data acquisition together bathymetric surveys of high and low frequency. From there, five were prepared in bathymetric pattern of Directorate of Hydrography and Navigation - DHN, with the depth in meters, on a scale of 1:2500 (Channel and Basin Evolution of Access to Port of Cabedelo), where there is a large extent possible beachrocks that hinder the movement of vessels in the port area, which can cause collisions, running aground and leaking oil. From the scatter diagram of the vectors of currents, it can be seen as the tidal stream and undergoes a channeling effect caused by the bidirectional effect of the tide (ebb and flood) in the basin of the Port of Cabedelo evolution in NW-direction SE and the highest speed of the currents occurs at low tide. The characterization weather for the period from 28/02 to 04/07/2010 values was within the expected average for the region of study. The multidisciplinary integration of products (digital maps and remote sensing images), proved to be efficient for the characterization of underwater geomorphological study area, reaching the aim to discriminate and enhance submerged structures, previously not visible in the images

Desenvolvimento de pastas cimentantes utilizando cimentos portland compostos para cimentação de poços petrolíferos

The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing

Estudo da formulação de pré-misturas secas para a cimentação de poços em terra

An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths

Novo método para estimativa do gradiente de fratura para poços de petróleo

The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application

Avaliação das pressões respiratórias máximas em crianças e adolescentes da grande Natal: elaboração de uma equação preditiva

The human respiratory system was so designed that would allow efficient ventilation, regardless of variations in the external environment that may hinder the act of breathing, such an act involves dozens of variables, among them we find the respiratory depression, which is nothing more than respiratory muscle strength. The pressures are widely used in several cases: Neuro-muscular; evolution of pulmonary dysfunction and a predictor for discontinuation of mechanical ventilation. Therefore it was proposed to carry out evaluations of these respiratory pressures for children and adolescents aged 10 to 16 years and propose a predictive equation that involves the anthropometric variables age (A, years), body mass (BM, kilograms) and height (H, meters) with maximal respiratory pressures (maximum inspiratory and expiratory pressure). Evaluations were performed in this age group of students in public and private schools of the Grande Natal , measurements were performed using the analogue manometer, were children and adolescents and their parents gave informed consent. 517 samples were taken, and 250 for males (M), 255 for females (F) and 12 were excluded according to our exclusion criteria. The sample was subdivided into three age groups (10-11, 12-13 and 14 to 16 years old). It was found through the student s t test (p ≤ 0.05) for all variables studied, children and male adolescents had higher means than females, except for the MC. For the correlation between the variables found significant correlation (p <0.05) among all the variables when analyzed as pairs except between MIP and height for females. The development of predictive equations (for p ≤ 0.05) based on three types of strategies adopted were restricted to two association between anthropometric variables isolated, resulting in: for males: MIP = -32.29 + (-2.11*A) + (-0.52*BM), MIP = 9.99 + (-0.36*BM) + (-49.40*H); MEP = 18.54 + 3.53*A + 0, 42*BM, MEP = -33.37 + 2.78*A + 52.18* H, MEP = -17.39 + 0.33*BM + 55.04*H; and, for females we find: MEP = 24.32 + 2.59 * A + 0.24*BM

Marcas dermatoglíficas, Antropometria e as qualidades físicas básicas dos escolares da rede municipal da cidade de Manaus

The objective of this study of comparative descriptive character went aimed at to analyze the characteristics dermatoglyphics, anthropometrics and the basic physical qualities, in 180 selected scholars in a stratified way, distributed like this: 10 year-old boys = 32; 09 years = 32; 08 years = 32; 10 year-old girls = 28; 09 years = 28; 08 years = 28), studying the fundamental teaching of the School Good Municipal Hope, located in the area east, in the Neighborhood of the Crowned, in the city of Manaus, Amazon. For identification of the dermatoglyphics characteristics collected, was the fingerprints; for evaluation of the corporal mass, height and IMC, they were used a digital scale with an estadiometer of the mark Filizola. The tests: to sit down and to reach flexibility); Horizontal Impulse or I jump in distance stopped (force of inferior members); Flex and extension of the trunk (it Forces abdominal); Flexion and extension of the arms in suspension in the bar (Force of superior members); 30 meters (Speed) and 9 minutes (Resistance applied aerobic) was to evaluate the basic physical qualities. The results demonstrated that differences didn't exist among the goods, in most of the studied variables, and the existent differences among the ages of 8, 9 and 10 years, they demonstrate a normality tendency in the infantile development

Marcadores genéticos, antropometria e qualidades físicas básicas nos estágios maturacionais de nadadores paraibanos

The aim of this research was to analyse genetic markers, anthropometry and basic physical qualities in the differret stages of sexual maturation in swimmers in Paraíba. It is characterised as a descriptive cross sectional study. The sample was composed of 119 swimmers (males) that were divided among the stages of sexual maturation, from 7 to 17,9 years of age. They were associated to a local federation, the Confederação Brasileira de Desportes Aquáticos. The tests used were: genetic markers dermatoglyphics; Anthropometry body mass, stature, arm span, fat percentage and somatotype; physical qualities speed tests (25 meters crawl), strength (vertical jump) to inferior limbs, verarm throwing arremesso of a 2kg medicineball to superior limbs and abdominal), resistence (12 minutes to swimming), agility (he multistage 20-meter shuttle run test), flexibility (sit and reach test ) and coodination (stroke index); power of swimming (mean velocity in 25 meters mutiplied by body mass) and the self assessment of the sexual maturation supervised by a pediatric specialist. In the analyses we used the test normality of Shapiro-Wilk, then, we used ANOVA- one way followed by Post-Hoc test of Scheffé. The data showed in dermatogliphics a genetic tendence to velocity (L>W) with a predominance of the meso-ectomorphic somatotype profile; in relation to the physical qualities there was an evolution of the results in every stage due to the antropometric variables, except in the coordination tests. There were no significative differences between the stages. We conclude that swimming in Paraíba is composed of a signicative number of velocists with a mesomorph somatotype profile and low fat percentage, and that made it posssible to us to recomend that the trainings must be individual and according to personal characteristics of each athlete, and that the used variables must be specific for every region of the country. This dissertation presents a relation of multidiciplinar interface and its content has an application in Physical Education and Medicine

Estilo de vida individual de universitários jovens com excesso de peso da Universidade Católica de Murcia-Espanha

Individual lifestyle includes health and risk behaviors that can altar health status. Excess weight is a public health problem of modern civilization and there is an estimated mean prevalence of 45% in European countries. In Spain, the Murcia Region is an area of high morbidity and mortality from cardiovascular disorders. In this study we assess the differences in health and risk behaviors in ove/weight and normal weight undergraduates at the Universidad Católica San Antonio de Murcia (UCAM). Methods: Transversal design of parallel groups (overweight - cases and normal weight - control) , formed using the anthropometric technique. A questionnaire applied to a sample of 471 undergraduates of either sex, between the ages of 18 and 29 years, enrolled in 4 bachelor degree courses (ADE, CA, PER, PUB) at UCAM. We performed a standardized measurement of body mass (weight in kg), height (in meters) using a Seca® scale with calibrated stadiometer, waist and hip circumferences (in cm) with an inelastic tape and skinfolds thickness (triceps and subscapular in mm) with a Holtain® caliper, to calculate body mass index (BMI), waist-to-hip ratio (WHR) and the sum of skinfolds (SSF). We applied a lifestyle questionnaire about alcohol and tobacco consumption, knowledge and behaviors related to health indicators (arterial pressure and cholesterol), diet and physical activity. The information was collected in April and May, 2001 at the UCAM laboratory of Applied Nutrition. Statistical analysis: analysis of independent groups, contingency tables that reveal which qualitativa variables show differences and associations between the groups, Pearson's chi-square,and a significance levei of p < 0.05 followed by a residual analysis (1.96). Descriptive statistics (mean and standard deviation) were used to establish the two groups: case and contrai with 65 men and 26 women each who had BMI < 25 kg/m2. Results: A total of 65 of the men assessed (14%) and 26 (6%) of the women were overweight. Mean body mass index of the case group was 27. 78 ±: 2.83 kg/m2 in the men and 26.26 ± 1.37 kg/m2 in the women, while contrai group men had mean BMI of 22.36 ± 1.72 kg/m2, while for the women it was 20.76 ±: 2.13 kg/m2. The self-declared values of weight and height were underestimated, but with high accuracy, sensitivity and specificity. Thus, these can be used to calculate the BMI of overweight Spanish undergraduates. Regular vigorous physical activity was observed only in normal weight men. The analysis showed the following significant differences for the qualitativa variables of the two groups. The contrai group was interested in arterial hypertension, believed that they were not overweight, that they had no abdominal fat, and had not considered controlling 'fatty food consumption. Those who thought of controlling it sometimes, did so without professional help. However, part of the overweight group believed that they were overweight and had abdominal fat between average and considerable, had often or always considered controlling fatty foods and had often or always tried to control consumption with the help of professionals. They had always thought of engaging in physical activities, unlike the normal weight individuals. Nearly all (95%) of the overweight undergraduates and most (75%) of the normal weight group reported that they sometimes or always controlled fatty food ingestion. Mean physical activity was nearly twice as high in the summer than in the winter. Conclusions: The overweight undergraduates in this sample displayed a lifestyle with a greater number of healthy behaviors when compared to normal weight individuals