5 resultados para Calculus of variations.
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The human respiratory system was so designed that would allow efficient ventilation, regardless of variations in the external environment that may hinder the act of breathing, such an act involves dozens of variables, among them we find the respiratory depression, which is nothing more than respiratory muscle strength. The pressures are widely used in several cases: Neuro-muscular; evolution of pulmonary dysfunction and a predictor for discontinuation of mechanical ventilation. Therefore it was proposed to carry out evaluations of these respiratory pressures for children and adolescents aged 10 to 16 years and propose a predictive equation that involves the anthropometric variables age (A, years), body mass (BM, kilograms) and height (H, meters) with maximal respiratory pressures (maximum inspiratory and expiratory pressure). Evaluations were performed in this age group of students in public and private schools of the Grande Natal , measurements were performed using the analogue manometer, were children and adolescents and their parents gave informed consent. 517 samples were taken, and 250 for males (M), 255 for females (F) and 12 were excluded according to our exclusion criteria. The sample was subdivided into three age groups (10-11, 12-13 and 14 to 16 years old). It was found through the student s t test (p ≤ 0.05) for all variables studied, children and male adolescents had higher means than females, except for the MC. For the correlation between the variables found significant correlation (p <0.05) among all the variables when analyzed as pairs except between MIP and height for females. The development of predictive equations (for p ≤ 0.05) based on three types of strategies adopted were restricted to two association between anthropometric variables isolated, resulting in: for males: MIP = -32.29 + (-2.11*A) + (-0.52*BM), MIP = 9.99 + (-0.36*BM) + (-49.40*H); MEP = 18.54 + 3.53*A + 0, 42*BM, MEP = -33.37 + 2.78*A + 52.18* H, MEP = -17.39 + 0.33*BM + 55.04*H; and, for females we find: MEP = 24.32 + 2.59 * A + 0.24*BM
Resumo:
This work proposes a new technique for phasor estimation applied in microprocessor numerical relays for distance protection of transmission lines, based on the recursive least squares method and called least squares modified random walking. The phasor estimation methods have compromised their performance, mainly due to the DC exponential decaying component present in fault currents. In order to reduce the influence of the DC component, a Morphological Filter (FM) was added to the method of least squares and previously applied to the process of phasor estimation. The presented method is implemented in MATLABr and its performance is compared to one-cycle Fourier technique and conventional phasor estimation, which was also based on least squares algorithm. The methods based on least squares technique used for comparison with the proposed method were: forgetting factor recursive, covariance resetting and random walking. The techniques performance analysis were carried out by means of signals synthetic and signals provided of simulations on the Alternative Transient Program (ATP). When compared to other phasor estimation methods, the proposed method showed satisfactory results, when it comes to the estimation speed, the steady state oscillation and the overshoot. Then, the presented method performance was analyzed by means of variations in the fault parameters (resistance, distance, angle of incidence and type of fault). Through this study, the results did not showed significant variations in method performance. Besides, the apparent impedance trajectory and estimated distance of the fault were analysed, and the presented method showed better results in comparison to one-cycle Fourier algorithm
Resumo:
The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks
Resumo:
Through out the course of a steady increase in search and recovery of space in the coastal zone, there is also an expanding concern about the erosion processes of this area. The main problem in coastal areas is that urbanization occurs in a disorderly fashion and unsustainable, further aggravating the problems of coastal dynamics. The study area of this work is located on the southern coast of Pirangi do Norte beach to about 20km south of Natal, capital of Rio Grande do Norte in the Parnamirim City. This area has the length of approximately 1km, divided into three sections (Western, Central and Eastern) with a morphology consisting of a tableland at the top, sea cliffs in the West and Central parts and sand dunes in the Eastern section, both vegetated, and a coastal plain on the inferior part associated with the presence of beach rocks. This study aimed to analyze the erosion processes operating in the excerpt of Pirangi do Norte beach and assess the feasibility of their monitoring making use of DGPS (Global Positioning System Differential mode). During the work it was carried out a physical description of the area through photo-interpretation and site survey after measurement of the shoreline in the period between November 2004 and November 2009 and beach profiles between August 2005 and July 2006. The analysis of the results of the annual surveys showed the occurrence of variations of the shoreline along the stretch traveled. Sites are identified in advancement coast from the sea and it was verified in loco the presence of erosion with deposition of materials on the lower part of the coastal bluff, the former position of the shoreline, showing a false notion of advancing it. This leads to the conclusion that the data collected in a survey of the shoreline should always be accompanied by photographic records of the local area and with the highest rate of erosion, thus avoiding the mistake of treating the deposit materials as evidence of progress coast. At the end of the study, after a review of various works to mitigate the erosion in the coastal zone, it is recommended to the area of study the adoption of an artificial feeding of the beach, aiming the minimization of the erosive effects of the tides. Moreover, it is suggested that even the continuity of monitoring, maintenance of existing vegetation and control of the occupation on the edge of sea cliffs
Resumo:
The unpredictable biologic behavior of the oral squamous cells carcinoma has determined extensive research on the evolution of such tumor. Due to the existing relation between the outer cell matrix and the tumor cells, the integrins have been used as markers in the predictive study of the cell behavior. This study aims to analyze immunohistochemically the expression of the integrin α2β1, α3β1, and α5β1 connections for the collagen, the laminin and the fibronectin respectively in 15 cases of squamous cells carcinoma from the lower lip and 15 from the tongue, with different scores of malignance grading. A predominantly diffuse, cytoplasm and granular immunological marking was observed in the majority of the analyzed cases. According to the marking intensity, integrin α2β1 appeared positive in 80% of the lip and in 93,3% of the tongue cases. The immunological reactivity of integrin α3β1 was classified as positive in 60% of both the tongue and lip cases. For this integrin, 20% and 33.3% of the tongue and lip cases, respectively, were negative. In relation to integrin α5β1 the intensity was classified as positive in 53,3% of the cases and strongly positive in 46,7% of those located in the lip. In the tongue carcinomas, the intensity was positive in 46,7% of the cases and strongly positive in 53,3%. The statistic analysis did not show any significant differences or correlation of expression between these integrins nor between the anatomical sites or between different scores of malignancy grading. The expressive immunological marking of the integrins, α2β1, α3β1, and α5β1 in the studied cases of squamous cell carcinomas leads us to think of a great participation of these proteins in oral carcinogenesis; however, our results do not allow us to correlate its expression as an indicator of variations in the biological behavior of this neoplasia