Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Estudo da sinterização de eletrólito sólido de céria dopada com gadolínia

Fuel cells are electrochemical devices that convert chemical energy in electrical energy by a reaction directly. The solid oxide fuel cell (SOFC) works in temperature between 900ºC up to 1000ºC, Nowadays the most material for ceramic electrolytes is yttria stabilized zirconium. However, the high operation temperature can produce problems as instability and incompatibility of materials, thermal degradation and high cost of the surround materials. These problems can be reduced with the development of intermediate temperature solid oxide fuel cell (IT-SOFC) that works at temperature range of 600ºC to 800ºC. Ceria doped gadolinium is one of the most promising materials for electrolytes IT-SOFC due high ionic conductivity and good compatibility with electrodes. The inhibition of grain growth has been investigated during the sintering to improve properties of electrolytes. Two-step sintering (TSS) is an interesting technical to inhibit this grain growth and consist at submit the sample at two stages of temperature. The first one stage aims to achieve the critical density in the initiating the sintering process, then the sample is submitted at the second stage where the temperature sufficient to continue the sintering without accelerate grain growth until to reach total densification. The goal of this work is to produce electrolytes of ceria doped gadolinium by two-step sintering. In this context were produced samples from micrometric and nanometric powders by two routes of two-step sintering. The samples were obtained with elevate relative density, higher than 90% using low energy that some works at the same area. The average grain size are at the range 0,37 μm up to 0,51 μm. The overall ionic conductivity is 1,8x10-2 S.cm and the activation energy is 0,76 eV. Results shown that is possible to obtain ceria-doped gadolinium samples by two-step sintering technique using modified routes with characteristics and properties necessary to apply as electrolytes of solid oxide fuel cell

Caracterização térmica (TG/DTG, DTA, DSC, DSC-fotovisual) de Hormônios bioidênticos (estriol estradiol)

Bioidentical hormones are defined as compounds that have exactly the same chemical and molecular structure as hormones that are produced in the human body. It is believed that the use of hormones may be safer and more effective than the non-bioidentical hormones, because binding to receptors in the organism would be similar to the endogenous hormone. Bioidentical estrogens have been used in menopausal women, as an alternative to traditional hormone replacement therapy. Thermal data of these hormones are scarce in literature. Thermal analysis comprises a group of techniques that allows evaluating the physical-chemistry properties of a drug, while the drug is subjected to a controlled temperature programming. The thermal techniques are used in pharmaceutical studies for characterization of drugs, purity determination, polymorphism identification, compatibility and evaluation of stability. This study aims to characterize the bioidentical hormones estradiol and estriol through thermal techniques TG/DTG, DTA, DSC, DSC-photovisual. By the TG curves analysis was possible to calculated kinetic parameters for the samples. The kinetic data showed that there is good correlation in the different models used. For both estradiol and estriol, was found zero order reaction, which enabled the construction of the vapor pressure curves. Data from DTA and DSC curves of melting point and purity are the same of literature, showed relation with DSC-photovisual results. The analysis DTA curves showed the fusion event had the best linearity for both hormones. In the evaluation of possible degradation products, the analysis of the infrared shows no degradation products in the solid state

Contribuições sobre estudos térmicos (TG/DTG, DTA, DSC e DSC-Fotovisual) da rifampicina e seus principais produtos de degradação

Since its synthesis over 48 years rifampicin has been extensively studied. The literature reports the characterization of thermal events for rifampicin in nitrogen atmosphere, however, no characterization in synthetic air atmosphere. This paper aims to contribute to the thermal study of rifampicin through thermal (TG / DTG, DTA, DSC and DSC - FOTOVISUAL ) and non-thermal (HPLC, XRPD , IR - FTIR , PCA) and its main degradation products ( rifampicin quinone , rifampicin N-oxide 3- formylrifamicin). Rifampicin study was characterized as polymorph form II from techniques DSC, IR and XRPD. TG curves for rifampicin in synthetic air atmosphere showed higher thermal stability than those in N2, when analyzed Ti and Ea. There was characterized as overlapping events melting and recrystallization under N2 with weight loss in the TG curve, suggesting concomitant decomposition. Images DSCFotovisual showed no fusion event and showed darkening of the sample during analysis. The DTA curve in synthetic air atmosphere was visually different from DTA and DSC curves under N2, suggesting the absence of recrystallization and melting or presence only decomposition. The IV - FTIR analysis along with PCA analysis and HPLC and thermal data suggest that rifampicin for their fusion is concomitant decomposition of the sample in N2 and fusion events and recrystallization do not occur in synthetic air atmosphere. Decomposition products studied in an air atmosphere showed no melting event and presented simultaneously to the decomposition initiation of heating after process loss of water and / or solvent, varying the Ti initiating events. The Coats - Redfern , Madsudhanan , Van Krevelen and Herwitz - Mertzger kinetic parameters for samples , through the methods of OZAWA , in an atmosphere of synthetic air and / or N2 rifampicin proved more stable than its degradation products . The kinetic data showed good correlation between the different models employed. In this way we contribute to obtaining information that may assist studies of pharmaceutical compatibility and stability of substances

O Trabalho e o labirinto da responsabilidade socioempresarial:a experiência da cidadania empresarial do Banco do Brasil

In the current systemic crisis, economic policy is directed to correct the consequences of the functioning of this metabolism, but within the limits of the capital. From this perspective, decision makers propose trade policies, agricultural and industrial to ensure conditions for economic growth. However, as a dead end, there is failure of the State in giving efficacy to the operation of all segments of the economy, especially given the budget constraint. Public managers are forced to seek external resources, resuming the cycle of political allegiance to the interests of international financial and banking representatives, installed in so-called multilateral. The complex ideological capital comes into play in trying to convince society that the paths taken by governments are inevitable, and that capitalism can be "humanized", even with the realization of the growing inequalities caused by historical irrationalism of the production process of capital . In this sense, emerging concepts that attempt to demonstrate the compatibility of the system to real human needs. This ideological offensive is intended to legitimize the capital. The so-called third sector has a special highlight with the concept of corporate social responsibility. It creates a political environment in which the inevitable mix-up with new illusions offered by and often funding the metabolism of capital in order to perpetuate this system. In this context, political elites, and considerable portions of the academy, embark on "waves of capitalist optimism," while the sociometabolismo capital expands its historical limits, driving forces postponing their collapse, but that cause human suffering and ecological stress. Wars are disseminated to strengthen the deadly war industry and the automobile industry; and devastating the environment of which depends the capital system. In this scenario disassemble, propositions emerge around a "new social pact" in order to minimize the adverse effects of the dynamics of reproduction of capital. The business class is called to exercise its role through the discourse that appeals to social responsibility programs, in order to intervene directly in the "social question". The core of this research is precisely this point. Although there is considerable scholarship on the phenomenon of Social Responsibility and Corporate Citizenship, there is also an evident lack of this approach focused on the banking sector in Brazil. The importance of rentier capital increased ownership of shares in the wealth produced by all of Brazilian society, justifies a sociological research project on Social Responsibility in the domestic financial sector. In this sense, it was decided to perform a dynamic approach to the "Corporate Citizenship" in the banking industry, specifically in the Bank of Brazil. As this is a key institution, is important analyze of the impacts of this strategy fetish of capitalist reproduction, in order to evaluate the social legitimization of rentier capital in Brazil. In this scenario of the abundance of the discourse on social responsibility there exist a progressive impoverishment of professional work in this segment in Brazil. There is a dramatic mismatch between rhetoric and practice because of the trend of deepening vulnerability of the working conditions of the Brazilian bank worker, from the 1990's. In the specific case of the Bank of Brazil, the first initiative of the institution was to conform to the principles of the UNO and the Ethos Institute, aiming to align their domestic policies to this new strategy of domination of capital. The purpose is to place the Bank in the ideological sphere of corporate social responsibility, just as with its partners in the private financial intercapitalist competition. Indeed, in the internal ambit of the Bank of Brazil, there is a policy to adjust its functional segments to the doctrine of Social Corporate Responsibility. The concepts of this doctrine is presented as something inexorable. There are no alternatives. The Bank of Brazil operates in a highly competitive market, the segment featuring the dominance of financial capital accumulation today. For this reason it can not fail to incorporate the technological advances organizational. For employees there is no alternative but to adapt to this new set of ideas proposed by the metabolism of capital

Desvios de finalidade no Direito Constitucional Tributário brasileiro: aspectos estruturais e teleológicos da tributação na Constituição Federal de 1988

This work deals with considerations regarding common types of tax misuse that are present in the 1988 Brazilian Constitution. Thus, the work aims to unveil dogmatic features present in these practices that are considered illegal and are beset with vices such as power misusage. The research also aims to acknowledge the unconstitutionality issues regarding other guidance on behalf of goods that are responsible for the gradual positive approach realized by the 1988 Brazilian Federal Constitution. Thus, the work systematically used methodological procedures that aim to interpret the logical premises present as in the structure proposed by incidence rule matrix as in Ihering´s correction criteria considered as effective in itself. This is done also considering themes such as the Brazilian Public Tax legal matters. The work also performs a teleological debate of the Brazilian National Tax System as well as other related themes. It is understood that power misusage or any regards increase in aliquots. This can be observed in the quantitative criteria present in central aspects regarding taxes that are described in the constitutional regime either regulatory or induced nature, such as §1º, of the normative information present in article number 153 which is considered predominantly as tax raising such as pointed out in the 1988 Brazilian Constitution. On the other hand, it is seen that the type of misguidance with goods is understood as a practice that deviates as well as cuts connection with (rectius, unattaches) tax resources that are gathered and destined to specific constitutional purposes. At the end, the work deals with issues that aim to identify possible causes that lead to the use of norms and patterns that regulate such deviations. The research emphasizes ratio issues that are present in tax inspection proposals and invalidation that aim to restore the logical compatibility of these normative actions included in the Constitutional Tax Legal matters that was put forth by the 1988 Brazilian Federal Constitution

Os crimes de mídia no paradigma democrático constitucional

The criminal responsibility of the media is analyzed when the criteria for production of news and events involving public safety are produced without considering the technical, legal and ethical practice of journalism in the media factors. Freedom of speech, expression of thought, necessary for professional qualifications and constitutional limits, reaching criminal constitutional principles and the possibilities of criminal liability for offenses practiced in the media are present as key factors legal dialogue in this work. The judgment of the Supreme Court on the unconstitutionality of Law nº. 5.250/67 called Media Law caused a gap in the national legal system, forcing the use of the criminal code to address issues that involve crimes produced in media professional performance. The presumption of innocence is ignored by the professional media during a police investigation where the information published does not respect, including constitutional guarantees: the right to privacy, honor and image. The right to information and the duty to inform media are worked in its constitutional aspect, considering that the same information should be produced is guided by the quality and guiding principles of truth. The constitutional concept of media is presented as information with the appropriate language of the news media, produced and disseminated through the vehicles of mass media, whether in print or digital platform. The presented model of the legal right to information is outlined from a constitutional hermeneutics, increasing the production of news as a result of the occupation of journalist in different news platforms, guaranteeing the quality of this prolific law. Under the Freedom of professional activity of the journalist, the constitutional limits are addressed in line with the reality of (non) regulation of their profession, considering the constitutional abuses committed in the exercise of that activity linked to communication fences. Jusphilosophic field reaches the limits of the duty of truth in journalism as a tool for spreading news, respect the audience and compatibility with the constitutional state. Using the conceptual and doctrinal aspects, this criminal offense is parsed from the journalistic practice and the publication of news involving public safety, with the hypothetical field consummation of that crime through the eventual intention. As a form of judgment against these crimes produced in honor media presents the court of the jury as a legitimate form of democratic decision

A proposta do estado empregador de ultima instância e o experimentalismo democrático: uma reflexão teórica sobre a compatibilidade desses dois programas

This paper aims to make a theoretical reflection on the theoretical compatibility between the program State Employer of Last Resort (ELR) and the Democratic experimentalism (ED). The ED arises in political thought as an alternative to neo-liberal and social democratic programs in order to rescue the discussion about the institutional organization of society and the market economy. About the involuntary unemployment, it proposes tax changes incidents on payroll and proposes work fronts to the most vulnerable or poorly trained. The hypothesis of this paper is that this approach is compatible with the ELR program, the post- Keynesian line. The ELR is presented as transgression of the mainstream of economic thought by proposing that the State acts as guarantor of employment, working as a stabilizing anchor for the economy. On the edge, the ELR proposes eliminate completely involuntary unemployment. The implementation of the ELR, however, requires the construction of institutions that aim to remake the market economy, as well as deepen and energize politics and democracy, goals that are part of the ED program. Thus, the ED would, in theory, an environment conducive to innovative policies guarantors of training and occupation of the individual, essential for their emancipation institutional environment. In Brazil, which has serious infrastructure problems and qualification of manpower, such a program has enormous potential benefit. However when transposed to the Northeast of Brazil through the Plan for the region based on the principles of the ED and the hypothetical coupling to the ELR could not confirm or reject the hypothesis sub-compatibility of these two theoretical frameworks. The findings point to a partial convergence between these two programs

A formação do professor alfabetizador em cursos de Pedagogia: contribuições e lacunas teórico-práticas

To the we assume the disciplines of the area of Literacy of the course of Pedagogy, our intention has been the one of working the literacy, the reading and the writing as alive processes, as social practices inserted in the history, continuators of the subjectivity, done in the culture and producing of culture. The importance of the course of Pedagogy in the teachers' formation is unquestionable; however our goal is to highlight, in this work, the paper of that course in the formation of the teacher alphabetized, while mediator of the literacy process with an inclusive vision. In that to walk, it appeared us the following subject: which the contributions and the gaps theoretical-practices - of degree courses in Pedagogy - experienced for the exits of that course, in the specific pedagogic work of alphabetizing children, young adult and/or our study aims at to investigate, under the perspective of teachers alphabetizer licensed in courses of Pedagogy, the contributions and the theoretical-practical gaps of those courses, in the formation of the educator alphabetizer. In this sense, our work if it bases on the presuppositions of the qualitative investigation that leaves of the foundation that there is a dynamic relationship among the real and subjective world, an alive interdependence between subject and object, an entail indissoluble between the objective world and the subjective (CHIZZOTTI, 1998, p.79). The research is characterized as a descriptive and interpretative study and for the collection of data; the questionnaire, the semi-structured interview and the documental analysis were used. We took the following providences for the choice of Locus and of the subject of the research: it visits to the schools; compatibility of the criteria previously defined for choice of Locus and of the Subjects. For the choice of those schools, we defined the following criteria: that, in your individuality / totality, they were located in integral neighborhoods of, at least three of the four administrative areas of the city of Natal; that, in your individuality / totality, they contemplated the public spheres and private of attendance; that, in the year of accomplishment of the research - 2004 - they were offering infantile education and/or fundamental teaching; this last one gone back to the children of the initial years and/or for the youth and adult of the first levels of the modality of EJA; and that made possible the researcher's access. Front to the particularities of our study object and considering the criteria of choice of the locus, four public schools and three private schools were selected. Like this being, in those schools, we would look for the subject of our work that they would owe: 1) to be working, in 2004, with children's literacy, youths or adults: they as teacher (the), it as coordinator (the) that guides teachers alphabetizer, in public schools or peculiar of the city of the Natal-RN; 2) to be exit (the) of the degree course in Pedagogy, supplied by institutions of superior level (public or matters) of the city of the Natal-RN; 3) to have concluded your course of Pedagogy in the period of 1990-2004; 4) to have, at least, 01(one) year of experience in literacy rooms (TARDIF, 2002). The subjects interviewees concluded your courses of Pedagogy, in the period from 1990 to 2004, in institutions different from the city of Natal/RN, being five to the whole: two public IES and three deprived IES. Of the analysis of the data, the theme emerged, ' teacher's Alphabetizer Educational Formation in Courses of Pedagogy', with the following categories: contributions of the courses of Pedagogy; More important disciplines in the educational formation; Areas / Aspects lacunars of the courses of Pedagogy. The pedagogic practice of the teacher alphabetizer demands a formation from him found in you know educational, requested in the children's literacy, youths and adults. In that work, we defended the thesis that the course of Pedagogy is the locus, par excellence, for that formation, in spite of possible structural limitations and curricular of the referred course. In spite of the countless contributions of the pedagogy course for the formation of the teacher alphabetizer, our data appear for the need of a revision of the proposals curricular of that course, getting the attention for the importance of a proposal formation curricular more gone back to the literacy process / literate and for the social inclusion. We thought that, although insufficient, the teacher's formation in that perspective is a fundamental condition for a practice pedagogic alphabetizer to be promoted, in fact, inclusive and promoter of the school success

Estudo das propriedades físico-químicas do biodiesel e suas influências na deterioração dos elastômeros aplicados no sistema de injeção dos motores diesel

The biodiesel use has become important due to its renewable character and to reduce environmental impacts during the fuel burning. Theses benefit will be valid if the fuel shows good performance, chemistry stability and compatibility with engines. Biodiesel is a good fuel to diesel engines due to its lubricity. Then, the aimed of this study was to verify the physicalchemistry properties of biodiesel and their correlations with possible elastomers damage after biodiesel be used as fuel in an injection system. The methodology was divided in three steps: biodiesels synthesis by transesterification of three vegetable oil (soybean, palm and sunflower) and their physical-chemistry characterization (viscosity, oxidative stability, flash point, acidity, humidity and density); pressurized test of compatibility between elastomers (NBR and VITON) and biodiesel, and the last one, analyze of biodiesels lubricity by tribological test ball-plan( HFRR). Also, the effect of mixture of biodiesel and diesel in different concentrations was evaluated. The results showed that VITON showed better compatibility with all biodiesel blends in relation to NBR, however when VITON had contact with sunflower biodiesel and its blends the swelling degree suffer higher influences due to biodiesel humidity. For others biodiesels and theirs blends, this elastomer kept its mechanical properties constant. The better tribological performance was observed for blends with high biodiesel concentration, lower friction coefficient was obtained when palm biodiesel was used. The main mechanisms observed during the HFRR tests were abrasive and oxidative wear

Avaliação mecânica e microestrutural de compósitos de poliéster com adição de cargas minerais e resíduos industriais

With the current growth in consumption of industrialized products and the resulting increase in garbage production, their adequate disposal has become one of the greatest challenges of modern society. The use of industrial solid residues as fillers in composite materials is an idea that emerges aiming at investigating alternatives for reusing these residues, and, at the same time, developing materials with superior properties. In this work, the influence of the addition of sand, diatomite, and industrial residues of polyester and EVA (ethylene vinyl acetate), on the mechanical properties of polymer matrix composites, was studied. The main objective was to evaluate the mechanical properties of the materials with the addition of recycled residue fillers, and compare to those of the pure polyester resin. Composite specimens were fabricated and tested for the evaluation of the flexural properties and Charpy impact resistance. After the mechanical tests, the fracture surface of the specimens was analyzed by scanning electron microscopy (SEM). The results indicate that some of the composites with fillers presented greater Young s modulus than the pure resin; in particular composites made with sand and diatomite, where the increase in modulus was about 168 %. The composites with polyester and EVA presented Young s modulus lower than the resin. Both strength and maximum strain were reduced when fillers were added. The impact resistance was reduced in all composites with fillers when compared to the pure resin, with the exception of the composites with EVA, where an increase of about 6 % was observed. Based on the mechanical tests, microscopy analyses and the compatibility of fillers with the polyester resin, the use of industrial solid residues in composites may be viable, considering that for each type of filler there will be a specific application

As construções adverbiais em mente: análise funcionalista e implicações para o ensino de língua materna

This research aims at investigating the constructions with adverbials in ly, based on the view of contemporaneous linguistic functionalism, such as proposed by Givón, Hopper, Thompson, Traugott, Furtado da Cunha, as well as the cognitivist notion of language, through construction grammar support upon the patterns of Goldberg and the prototypes theory. The cognitive functional approach adopted here considers the change as a proper and inherent phenomenon of language and understands the linguistic phenomenon as resulting from effective use of language. Another aspect to be considered to the realization of this study is the fact that the formation adjective + ly is a word construction mechanism really productive, which generates interests on linguistic description. In a particular way, our leading objective is to exam the constructions with adverbials in ly in the context of language in use, in its oral and written forms, looking for to apprehend the meaning multiple manifestations forged in the use. Bearing this in mind, we worked with data from the Corpus Discurso & Gramática (Natal). There are, in the data, adverbs ended in ly that take the signification of mode, as foreseen in traditional models, but there are also other significations, for instance, the modalizador in its different manifestations. The results show that this adverb is a linguistic mark that carries in its constitution the multissêmico and multifunctional character, which interferes extremely in the ordination of this category, assuming a position sometimes pre-verbal, sometimes post-verbal. Other aspect observed refers to the relationship between the adverb and the verb, with emphasis on the compatibility or restriction between them, option which is related to the semantic aspect. The data in analysis legitimate the use in different constructions with adverb ended in ly in various genres, as follows: personal experience narrative, retold narrative, local description, proceeding account, opinion account, both in oral as in written language

Avaliação do programa de tutorização da EMATER-RN para servidores em estágio probatório

The present thesis evaluated the contributions and limitations of the tutorship program introduced in EMATER-RN, as a tactic of organizational socialization for civil servants in probationary stage. Tutorship was understood as an intensive and continuous relational process, in which a more experienced person in the organization the tutor offers psychosocial support, stimulates the development of the professional career and enables to the newcomer the tutee learning on job performance. The organizational socialization was considered in the perspective of the symbolic interactionism. The study was characterized as a program evaluation and as an action research. The practical interventions for the program implementation were conducted and, at the same time, the evaluations of process, results and reaction to the program were applied. Among the major contributions of the action research, it stood out: the diagnosis of reasons for the formation of the pair and of expectations of tutors and tutees, the improvement of the tutorship registration tools, the ascertainment of the success of the program in the socialization of the new civil servants, the confirmation of the importance of the compatibility among them and of the adequate performance of tutorship functions for achieving its benefits. Based in constraints of the program, one may quote as essential recommendations: the formation of a technical team supporting the program, the clear establishment of deadlines for each procedure and the reinforcement to its compliance, the investigation of the functions performed by the tutor, the sensitization of the managers to the resolution of problems that affect the program, the voluntary participation of the tutor and the continuous meetings of tutors and tutees. One settles for the relevance of the program and in favor of its continuation, provided that its improvement and systematic management are conducted.