Desempenho de um painel fotovoltaico de baixa tensão, acoplado ao protótipo de um conversor dc/dc topologia Booster

Low voltage solar panels increase the reliability of solar panels due to reduction of in series associations the configurations of photovoltaic cells. The low voltage generation requires DCDC converters devices with high efficiency, enabling raise and regulate the output voltage. This study analyzes the performance of a photovoltaic panel of Solarex, MSX model 77, configured to generate an open circuit voltage of 10.5 V, with load voltage of 8.5 V, with short circuit current of 9 A and a power of 77 W. The solar panel was assembled in the isolated photovoltaic system configuration, with and without energy storage as an interface with a DCDC converter, Booster topology. The converter was designed and fabricated using SMD (Surface Mounted Devices) technology IC (integrated circuit) that regulates its output voltage at 14.2 V, with an efficiency of 87% and providing the load a maximum power of 20.88 W. The system was installed and instrumented for measurement and acquisition of the following data: luminosities, average global radiation (data of INPE Instituto Nacional de Pesquisas Espaciais), solar panel and environment temperatures, solar panel and DC-DC converter output voltages, panel, inverter, and battery charge output currents. The photovoltaic system was initially tested in the laboratory (simulating its functioning in ideal conditions of operation) and then subjected to testing in real field conditions. The panel inclination angle was set at 5.5°, consistent with the latitude of Natal city. Factors such as climatic conditions (simultaneous variations of temperature, solar luminosities and ra diation on the panel), values of load resistance, lower limit of the maximum power required by the load (20.88 W) were predominant factors that panel does not operate with energy efficiency levels greater than 5 to 6%. The average converter efficiency designed in the field test reached 95%

Longitudinal Clinical Evaluation of Undercut Areas and Rest Seats of Abutment Teeth in Removable Partial Denture Treatment

PURPOSE: Adequate preparation of abutment teeth for removable partial denture (RPD) rest seats allows appropriate masticatory force transmission, retention, and stability of supporting structures. It follows that careful preparation will be important for the longevity of the rehabilitation. The present study aimed to clinically evaluate rest seats and undercut areas of abutment teeth in RPD wearers after 2 years of use. MATERIALS AND METHODS: A total of 193 occlusal, incisal, and cingulum rest seats were evaluated in terms of shape, rest adaptation, wear, caries, fractures, and surface type (enamel, composite resin, or amalgam). Two hundred and fourteen undercut areas were evaluated in terms of surface type (enamel or restoration) and integrity. This study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, resolution 196/1996, protocol number 11/05. RESULTS: Intact preparations accounted for 92.2% of the total. Application of the Pearson test (p= 0.289) found no statistically significant differences among the materials on which the rest seats were prepared. For the undercut areas, 20.7% of those obtained on restorative material were nonintact. In addition, Fisher's exact test showed a statistically significant difference (p= 0.001) in surface type; enamel surfaces were shown to be 14 times more stable than restored surfaces. CONCLUSIONS: The results of this study suggest that rest seats are stable, regardless of the material on which they are prepared. Retentive areas were shown to be more stable when they were located in enamel.

Longitudinal Clinical Evaluation of Undercut Areas and Rest Seats of Abutment Teeth in Removable Partial Denture Treatment

PURPOSE: Adequate preparation of abutment teeth for removable partial denture (RPD) rest seats allows appropriate masticatory force transmission, retention, and stability of supporting structures. It follows that careful preparation will be important for the longevity of the rehabilitation. The present study aimed to clinically evaluate rest seats and undercut areas of abutment teeth in RPD wearers after 2 years of use. MATERIALS AND METHODS: A total of 193 occlusal, incisal, and cingulum rest seats were evaluated in terms of shape, rest adaptation, wear, caries, fractures, and surface type (enamel, composite resin, or amalgam). Two hundred and fourteen undercut areas were evaluated in terms of surface type (enamel or restoration) and integrity. This study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, resolution 196/1996, protocol number 11/05. RESULTS: Intact preparations accounted for 92.2% of the total. Application of the Pearson test (p= 0.289) found no statistically significant differences among the materials on which the rest seats were prepared. For the undercut areas, 20.7% of those obtained on restorative material were nonintact. In addition, Fisher's exact test showed a statistically significant difference (p= 0.001) in surface type; enamel surfaces were shown to be 14 times more stable than restored surfaces. CONCLUSIONS: The results of this study suggest that rest seats are stable, regardless of the material on which they are prepared. Retentive areas were shown to be more stable when they were located in enamel.

Reutilização de imóveis de interesse patrimonial, voltados para a ahabitação: um estudo de caso na Ribeira-Natal/RN

This work analyzes the reutilization of real estate of patrimonial interest, come back toward habitation. One understands as real estate of patrimonial interest the old ones that present relevant architectural typologies that must be preserved; some buildings that represent characteristic architectural styles of a determined period; some valued real estates for the history of the city (historical, memory and image signification that has of certain places) and buildings with exceptional artistic elements. In short, real estate of patrimonial interest. The place or site to be studied will be the neighborhood of the Ribeira, because is an area that protects a bigger interest for the historic patrimony of the city. The habitation use was thought as a booster element of revitalization processes of degradable historic site, contributing to the preservation of artistic, architectural and historic patrimony, and thus to stimulate the accomplishment of the re-qualification of the neighborhood of the Ribeira. It is intended with the present study to examine alternatives to make possible habitation re (uses) in the historical quarter of the Ribeira in old constructions of patrimonial value

Custo social de oportunidade na trajetória de acesso ao ensino superior: o caso dos ingressantes na UFRN nos vestibulares de 2006 a 2010

Access is a problem of higher education in Brazil that has existed since the formalization of this has occurred since the installation of the Portuguese court in Brazil in 1808. Only 10% of young people between 18 and 24 years of age attending this level of education in 2000, arriving in 2010 just 15%, far from that determined the National Education Plan in 2001, triple that percentage by the year 2010. In addition, a majority of seats of public HEIs is populated by students from the private network, especially in high-demand courses. In this context, this study aims to identify the costs related to the trajectories of students who were successful in the vestibular UFRN editions from 2006 to 2010. Presents an overview of higher education in Brazil, a brief history of vestibular, as well as new forms of access, and some of the policies to expand such access, highlighting the argument Inclusion UFRN. Focusing on the theme of the paper presents the concepts of opportunity costs and social. After collecting data through a questionnaire and consultation of databases COMPERVE was developed to search for a descriptive and analytical, with the participation of 3,995 students, of whom 1642 (41.1%) had completed secondary education in schools public, and 2,078 (52%) in private schools. The profile indicates that 90% are single, about 50% are 21 years of age, are white and female. In the course of preparation for college entrance exams, 80% chose the course during or after completion of the last year of high school, and almost 70% said they had started preparing at that time. Findings related to the costs involved with this preparation indicate that, in most cases there were school fees and disbursements and workshops, and the purchase of books and other materials, with parents primarily responsible for this cost, the amount disbursed each month was up $ 300 for 64% of respondents and only 7% of them exceeded $ 1,000, the major non-financial costs were characterized by the following resignations: job opportunities (24%) or temporary work (20%) courses of languages (26%), leisure activities (48%), leisure travel (43%), and parties and / or shows (54%). Of social investments by the government, stand out in the tax waiver scholarships for study in private institutions, grant exemption from the registration fee of vestibular, the preparatory courses UFRN, and seminars by COMPERVE / UFRN with networks of high school. From the junction of the opportunity costs (private costs) and social costs (public costs), a new concept: the social opportunity cost, which measures the combined efforts of families and government to finance the opportunity to access higher education of an individual. This concept can and should be incorporated as a strategic vector for the sake of democratic university, which reflects the social model that is sought

A participação popular na elaboração de políticas públicas de desenvolvimento local: um estudo no Município de Serrinha/RN (1997-2004)

The question of participation has been debated in Brazil since the 1980 decade in search a better way to take care of poulation s demand. More specificaly after the democratic open (1985) begins to be thought ways to make population participates of decisions related to alocation of public resources. The characteristic of participates actualy doesn t exist, population to be carried through is, at top, consulted, and the fact population participates stays restrict to some technics interests at the projects, mainly of public politics of local development. Observe that this implementation happens through a process and that has its limits (pass) that could be surpassed through strategies made to that. This dissertation shows results of a research about participative practices in city of Serrinha between 1997 and 2004, showing through a study of the case of Serrinha what was the process used to carry through these pratices in a moment and local considered model of this application. The analyses were developed through a model of research elaborated by the author based on large literature respects the ideal process to implant a participative public politics. The present research had a qualitative boarding, being explorative and descritive nature. The researcher (author of this dissertation) carried through all the research phases, including the transcriptions of interviews that were recorded with a digital voice recorder. Before the analysis of these data was verified that despite the public manager (former-mayor) had had a real interest in implant a process of local development in city, he was not able to forsee the correct process to do it. Two high faults were made. The first was the intention to have as tool a development plan, what locked up to make this plan was the booster of supossed participative pratice and no the ideal model that would be a plan generate by popular initiative. The second one was absence of a critical education project for the population that should be the fisrt step to carry through a politc like that

Fabricação de eco-composito com a fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Dual path: a concept to improve the esthetic replacemente of missing anterior teeth with removable partial denture

The dual path of insertion concept for removable partial denture (RPD) design may be used in esthetically demanding situations. When compared to conventional RPDs, the main advantage of this design is the minimal use of clasps. This clinical report describes the treatment of a patient with an anterior maxillary edentulous area using a dual path RPD. The diagnostic cast was surveyed to ensure the adequacy of the undercuts on the mesial surfaces of the anterior abutments, where rigid minor connectors were placed. Inverted V-shaped canine cingulum rest seats were prepared to provide resistance to tooth movement during function. The dual path RPD concept allows excellent esthetic results, minimizes tooth preparation, and reduces the tendency toward plaque accumulation in a Kennedy class IV partially edentulous arch.

Algoritmos meta-heurísticos para a solução do problema do caixeiro viajante com múltiplas caronas

The Traveling Salesman with Multiple Ridesharing (TSP-MR) is a type of the Capacitated Traveling Salesman, which presents the possibility of sharing seats with passengers taking advantage of the paths the salesman travels through his cycle. The salesman shares the cost of a path with the boarded passengers. This model can portray a real situation in which, for example, drivers are willing to share parts of a trip with tourists that wish to move between two locations visited by the driver’s route, accepting to share the vehicle with other individuals visiting other locations within the cycle. This work proposes a mathematical formulation for the problem, and an exact and metaheuristics algorithms for its solution, comparing them.

Algoritmos meta-heurísticos para a solução do problema do caixeiro viajante com múltiplas caronas

The Traveling Salesman with Multiple Ridesharing (TSP-MR) is a type of the Capacitated Traveling Salesman, which presents the possibility of sharing seats with passengers taking advantage of the paths the salesman travels through his cycle. The salesman shares the cost of a path with the boarded passengers. This model can portray a real situation in which, for example, drivers are willing to share parts of a trip with tourists that wish to move between two locations visited by the driver’s route, accepting to share the vehicle with other individuals visiting other locations within the cycle. This work proposes a mathematical formulation for the problem, and an exact and metaheuristics algorithms for its solution, comparing them.

Reutilização de imóveis de interesse patrimonial, voltados para a ahabitação: um estudo de caso na Ribeira-Natal/RN

This work analyzes the reutilization of real estate of patrimonial interest, come back toward habitation. One understands as real estate of patrimonial interest the old ones that present relevant architectural typologies that must be preserved; some buildings that represent characteristic architectural styles of a determined period; some valued real estates for the history of the city (historical, memory and image signification that has of certain places) and buildings with exceptional artistic elements. In short, real estate of patrimonial interest. The place or site to be studied will be the neighborhood of the Ribeira, because is an area that protects a bigger interest for the historic patrimony of the city. The habitation use was thought as a booster element of revitalization processes of degradable historic site, contributing to the preservation of artistic, architectural and historic patrimony, and thus to stimulate the accomplishment of the re-qualification of the neighborhood of the Ribeira. It is intended with the present study to examine alternatives to make possible habitation re (uses) in the historical quarter of the Ribeira in old constructions of patrimonial value