Abordagem inicial de lesões mamárias por biopsia helicóide: estudo experimental

OBJECTIVE: Evaluating the kit-Bh performance in carrying out of breast biopsies. METHODS: They were randomly selected a sample of 30 patients with breast cancer undergoing mastectomy, based on the results of a pilot study from February 2008 to April 2010. They were excluded women with had not palpable, stone-hard consistency tumors, previous surgical manipulation or that contains liquid. Using the helicoid biopsy Kit (kit Bh) and an equipment Core biopsy with cannula and needle and 14 gauge respectively, it was collected a fragment of sound equipment in the area and in tumors in each specimen, totaling 120 fragments for histological study. For data analysis, it was defined a 95% confidence level and used the SPSS-13 version, the Kappa index and the parametric Student t test. RESULTS: Mean age of patients was 51.6 years (± 11.1 years). The infiltrating ductal carcinoma showed a higher incidence, 26 cases (86.7%). The Core biopsy had a sensitivity of 93.3%, specificity of 100% and accuracy 96.7%, while the helicoid biopsy had a sensitivity of 96.7%, specificity of 100% and accuracy 98.3%. By comparing the histology of tumors and the fragments of biopsies, there was high degree of agreement in diagnoses (kappa of 0.93 with p <0.05) CONCLUSION: Both devices provided the histological diagnosis of lesions with high accuracy. Results of this study showed that the helicoid biopsy is a reliable alternative in 22 the preoperative diagnosis of breast lesions. Further studies in vivo better will define the role of Kit Bh in the diagnosis of these lesions

Método Fuzzy para auxílio ao diagnóstico de câncer de mama em ambiente inteligente de telediagnóstico colaborativo para apoio à tomada de decisão

Breast cancer, despite being one of the leading causes of death among women worldwide is a disease that can be cured if diagnosed early. One of the main techniques used in the detection of breast cancer is the Fine Needle Aspirate FNA (aspiration puncture by thin needle) which, depending on the clinical case, requires the analysis of several medical specialists for the diagnosis development. However, such diagnosis and second opinions have been hampered by geographical dispersion of physicians and/or the difficulty in reconciling time to undertake work together. Within this reality, this PhD thesis uses computational intelligence in medical decision-making support for remote diagnosis. For that purpose, it presents a fuzzy method to assist the diagnosis of breast cancer, able to process and sort data extracted from breast tissue obtained by FNA. This method is integrated into a virtual environment for collaborative remote diagnosis, whose model was developed providing for the incorporation of prerequisite Modules for Pre Diagnosis to support medical decision. On the fuzzy Method Development, the process of knowledge acquisition was carried out by extraction and analysis of numerical data in gold standard data base and by interviews and discussions with medical experts. The method has been tested and validated with real cases and, according to the sensitivity and specificity achieved (correct diagnosis of tumors, malignant and benign respectively), the results obtained were satisfactory, considering the opinions of doctors and the quality standards for diagnosis of breast cancer and comparing them with other studies involving breast cancer diagnosis by FNA.

O ser elástico, mola, agulha, trepidação: expressões do homoerotismo em Fernando Pessoa

This Masters thesis investigates and analyzes the homoerotic expressions in Fernando Pessoa s poetry and in his heteronyms : Álvaro de Campos, Alberto Caeiro and Ricardo Reis. Through the elaboration of deceptive strategies as a way to escape from the insults and the constraints, the poet by means of creative runaway lines builds up a homoerotic poetry that differ from the established patterns and representational models of the literature. We can find, bearing in mind a problematic sexuality which overflows in the various I s, of the sinuous identities and the movable boundaries, and intense mask games. They become real in poems, especially by means of sensations, yielding the possibility of a queer discourse and generating a homoerotic poetry. Pessoa s homoerotism is, thus, presented amid friendly relationships, smooth spaces, of heterotrophy of the city, or others space and the closet s aesthetics. Based on this, it is noted the articulations of a performance gender as body scripture and inscription, thus establishing a physical-writing which reveals a transgressive sexuality, with multiple entrances and exits, affirmations and denials that originate paradoxes. In this matter, we develop links between Foucault conceptions (2010a, 2010b, 2011) towards the history of sexuality, friendship and the power-knowledge relations with traces of significance and subjectivity, in processes of faciality and BwO (Body-without-Organs) in Deleuze and Guattari (1996). We still consider the ontological questionings towards the Gay dimension in Eribon (2008) and we raise aspects concerning the construction of the idea of masculinity in Bourdieu (2010). Finally, we base ourselves on Sedgwick s 1993 closet epistemological approach, as well as on Butler s 2012 gender and performance theory, also going through a few Bataille 1987 passages about erotism, that redimension the homoaffective images of the Portuguese poet

Estratégia reprodutiva do peixe-voador, Hirundichthys affinis e do peixe agulha preta, Hemiramphus brasiliensis no litoral de Caiçara do Norte, Rio Grande do Norte, Brasil

The flyingfish, Hirundichthys affinis (Günther, 1866) (Exocoetidae) and ballyhoo half beak, Hemiramphus brasiliensis (Linnaeus, 1758) (Hemiramphidae) are marine fish species of commercial value, which contribute to artisanal fishery production of Rio Grande do Norte, Brazil. Besides the economic importance, these fish are important from an ecological point of view, being components in pelagic food chain, where they are the preferred prey of larger predators of high commercial value. This study aimed to determine the reproductive strategies of H. affinis and H. brasiliensis and the fishery production of H. affinis in the northern coast of Rio Grande do Norte. The results are presented in the form of six cientific articles and a review paper. The first article presents the morphometric measurements and meristic counts which confirmed the taxonomic status, population structure in length-weight and the gonad development of H. affinis through macroscopic observations of the ovaries and testes. Females of this species were bigger and heavier than males. The second article describes the reproductive tactics, such as, sex ratio, length at first sexual maturity, histological aspects of gonads, fecundity and spawning season, that indicate the reproductive strategy of H. affinis. The third article shows annual changes in the fishery production of H. affinis in Caiçara do Norte, during the period of 1993 to 2010, emphasizing the relevance of this fish in total fishery production of Rio Grande do Norte, besides registering the fall in production in the years 2008 to 2010. The fourth article describes the population structure, with respect to the length and weight, the length-weight relationship, growth type and sex ratio of Hemiramphus brasiliensis. The fifth article describes the reproductive biology of H. brasiliensis, with details about sex ratio, length at first sexual maturity, fecundity, type of breeding and spawning season. The sixth article deals with the reproductive strategy of H. brasiliensis. The review paper presents the topic of age determination of tropical fish using analysis of otoliths. Both species use the coastal waters of Caiçara do Norte for reproductive purposes. The flying fish, H. affinis migrates from the oceanic waters to the coastal waters to reproduce, coinciding with the rainy season. H. affinis presents total spawning and a seasonal reproductive strategy. However, H. brasiliensis lives and reproduces in the coastal waters displaying partial spawning and an equilibrium reproductive strategy

Um algoritmo paralelo eficiente de migração reversa no tempo (rtm) 3d com granularidade fina

The reverse time migration algorithm (RTM) has been widely used in the seismic industry to generate images of the underground and thus reduce the risk of oil and gas exploration. Its widespread use is due to its high quality in underground imaging. The RTM is also known for its high computational cost. Therefore, parallel computing techniques have been used in their implementations. In general, parallel approaches for RTM use a coarse granularity by distributing the processing of a subset of seismic shots among nodes of distributed systems. Parallel approaches with coarse granularity for RTM have been shown to be very efficient since the processing of each seismic shot can be performed independently. For this reason, RTM algorithm performance can be considerably improved by using a parallel approach with finer granularity for the processing assigned to each node. This work presents an efficient parallel algorithm for 3D reverse time migration with fine granularity using OpenMP. The propagation algorithm of 3D acoustic wave makes up much of the RTM. Different load balancing were analyzed in order to minimize possible losses parallel performance at this stage. The results served as a basis for the implementation of other phases RTM: backpropagation and imaging condition. The proposed algorithm was tested with synthetic data representing some of the possible underground structures. Metrics such as speedup and efficiency were used to analyze its parallel performance. The migrated sections show that the algorithm obtained satisfactory performance in identifying subsurface structures. As for the parallel performance, the analysis clearly demonstrate the scalability of the algorithm achieving a speedup of 22.46 for the propagation of the wave and 16.95 for the RTM, both with 24 threads.

Análise do comportamento e crescimento do camarão branco Litopenaeus vannamei (Boone, 1931) em diferentes substratos inconsolidados

The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Diagnóstico da possível influência da atividade petrolífera em sedimentos de fundo da Bacia Piranhas-Açu, região Baixo Açu/RN

It is located in an area of increasing oil exploration, the region of the Lower Açu is at the mercy of a possible pollution generated by this economic activity, which includes various chemical substances harmful to health, such as metals. This thesis aims to, diagnose the areas of River Piranhas-Açu, a region of the Lower Açu, which are polluted by traces factors and more. In this study, it was determined the concentration of the chemica elements Al, CD, Cr, Cu, Fe, Mn, Ni, P, Pb, V and Zn, through the technique of ICP-OES analysis and the size of sediments and their contents organic matter. Were mapped by GPS, 12 points from collections. The interpretations of the results, together associating that allowed pollution to a possible contamination by oil activity. The results showed tha some regions have low concentrations of cadmium, lead, copper, manganese and zinc unable to promote damage to human health. However, there are places where the concentrations of certain metals chromium, iron and zinc are moderately polluted compared to the results with the reference values of literature and others that are highly polluted by iron. However, due to a greater number of wells in production in those locations, those higher concentrations, it can be suggested a possible influence of oi production in some areas with concentrations of chromium and lead are higher than the rest of the points of monitoring. Moreover, it is observed that the highest levels of metals found in sediment of finer texture and more organic matter content

Caracterização ambiental de bancos areno-lamosos nos campos petrolíferos de Macau e Serra (RN), como subsídio às medidas mitigadoras ao processo erosivo

On Rio Grande do Norte northern coast the process of sediment transport are intensely controlled by wind and sea (waves and currents) action, causing erosion and shoreline morphological instability. Due to the importance of such coastal zone it was realized the multi-spectral mapping and physical-chemical characterization of mudflats and mangroves aiming to support the mitigating actions related to the containment of the erosive process on the oil fields of Macau and Serra installed at the study area. The multi-spectral bands of 2000 and 2008 LANDSAT 5 TM images were submitted on the several digital processing steps and RGB color compositions integrating spectral bands and Principal Components. Such processing methodology was important to the mapping of different units on surface, together with field works. It was possible to make an analogy of the spectral characteristics of wetlands with vegetations areas (mangrove), showing the possibility to make a restoration of this area, contributing with the environmental monitoring of that ecosystem. The maps of several units were integrated in GIS environment at 1:60,000 scale, including the classification of features according to the presence or absence of vegetation cover. Thus, the strategy of methodology established that there are 10.13 km2 at least of sandy-muddy and of these approximately 0.89 km2 with the possibility to be used in a reforestation of typical flora of mangrove. The physical-chemical characterization showed areas with potential to introduce local species of mangrove and they had a pH above neutral with a mean of 8.4. The characteristic particle size is sand in the fine fractions, the high levels of carbonate, organic matter and major and trace element in general are concentrated where the sediment had the less particles size, showing the high correlation that those elements have with smaller particles of sediment. The application of that methodological strategy is relevant to the better understanding of features behavior and physical-chemical data of sediment samples collected on field allow the analysis of efficiency/capability of sandy-muddy to reforestation with local mangrove species for mitigation of the erosive action and coastal processes on the areas occupied by the oil industry

Avaliação da correlação entre os parâmetros, carbono orgânico total e elementos tóxicos, em solo de um posto de serviço e revenda de combustíveis

Today a major responsibility for the contamination of soil and groundwater and surface water are establishments known as gas stations of fuel which has attracted increasing attention from both the general population as the state agencies of environmental control due to leaks in storage tanks and mainly to disruption of pipe corrosion of tanks and pumping. Other services, like oil changes and car wash are also causes for concern in this type of establishment. These leaks can cause or waste produced, and the contamination of aquifers, serious health problems and public safety, since most of these stations located in urban areas. Based on this, the work was to evaluate soil contamination of a particular service station and fuel sales in the city of Natal, through the quantification of heavy metals like Cd, Cu, Cr, Ni, Pb, Zn of total organic carbon (TOC) and organic matter using different techniques such as optical emission spectrometry with inductively coupled plasma source (ICP OES), Total Organic Carbon analyzer and gravimetric analysis respectively. And also to characterize the soil through particle size analysis. Samples were taken in 21 georeferenced points and collected in the same period. The soils sampled in sampling stations P3, P5, P6, P10, P11, P12, P13, P14, P15, P17, P18 and P20 showed the smallest size fractions ranging from fine sand to medium sand. The other study sites ranged from fine sand to medium sand, except the point P8 showed that only the type size medium sand and P19, indicating a particle size of the coarse type. The small correlation of organic matter with the elements studied in this work suggests that these are not of anthropogenic origin but geochemical support

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Avaliação da dor pós-operatória: análise em pacientes submetidos a cirurgias abdominais em um hospital universitário de Natal/RN

It is an exploratory and descriptive study made by a quantitative approach, developed among February and May 2010, aiming to assess the pain of patients underwent abdominal surgeries in a University Hospital, in Natal/RN; to identify the local and intensity of the pain based on Numerical Estimative Scale; to analyze the pain related to the sensorial-discriminative, motivational-affective and cognitive-assessment dimensions, using the McGill Questionnaire pain; to establish a relation between the pain process and age, gender, religion, and king of surgery; to identify the medicines efficiency used to control postoperative pain. The sample was composed by 253 patients underwent abdominal surgeries. The results showed a total of 63.63% females between 38 and 47 years of age (21.34%); illiterates (21.73%); married (64.03%), living in Natal and surroundings (67.97%) and Catholics (74.30%). In their first assessment, 84.19% showed postoperative pain; the pain was considered light in 18.97% of them, moderate in 21.74% and severe in 43.48%. The mean number of descriptors chosen through the McGill Questionnaire Pain was 10.78 (DP= 6.09) and pain rating 23.65 (DP= 15.93). The descriptors selected with higher frequency were: sickening pain (69.01%), tired (65.25%), thin (62.44%), bored (58.69%), ardor (46.48%), pointed (38.50%) and colic (35.21%). In their second assessment, 57.71% of patients didn t relate any postoperative pain and 42.29% were still complaining about the pain. After taking analgesic medication, just 41.90% of patients who had complete pain relief. The Pharmacological groups most used were: simple analgesic (37.86%), weak opioids (32.98%), AINES (19.85%) and strong opioid (9.31%). It was not found a significant postoperative pain variation related to the sexes, religion and kind of surgery. It was concluded there were a high level in the number of patients with postoperative pain, mainly in a severe scale. Less than half of patients had the pain relief. Then, it was observed there was not coherence between the pain intensity and the analgesic it was used. To solve or relieve this kind of problems is necessary a permanent education to the health professionals who works in this area

Acidentes de Trabalho : análise em profissionais de enfermagem que atuam nas unidades de terapia intensiva e urgência Natal/RN

It is a descriptive-exploratory research, with a quantitative approach, aiming to characterize typical occupational accident suffered by the professionals from nursery group, in the Intensive Care Units and Emergency in a hospital in Natal-RN, trying to identify the factors that contribute to those accidents; to identify some information taken by those professionals related to the accident risks; to know the procedures taken after each accident. This sample is composed by 176 professionals that are 44 nurses and 132 nursing technicians/auxiliaries, collected from March to April 2010. The results related to the personal characterization of the nursery group showed that 31 (18.61%) are between the 36-40 years of age; 148 (84.09%) females and 96 (55.68%) had finished High School. Related to the professional characterization, 53 (30.11%) are nurses, and 123 (69.88%) nursing technicians and auxiliaries; 44 (25.00%) are working as nurses, and 132 (75.00%) as nursing technicians and auxiliaries; 45 (25.56%) are working in the nursery area between 15 to 20 years and 11 months; 53 (30.11%) are in this institution between 10 to 14 years and 11 months; 79 (44.88%) work in the ICU; 55 (31.25%) are working in this area from 1 to 4 years and 11 months; 110 (62.50%) like to work in this area; 161 (91.47%) work 30 to 40 hours per week; 90 (51,13%) have another employment. Related to knowledge about typical occupational accident, 167 (94.88%) said they know about it; 96 (54.54%) know the accident rules; 103 (58.52%) think it is important to talk about this subject in the nursery courses; 92 (52.27%) said this subject is important to be discussed in the work and 372 (87.73%) think education is necessary to reduce accident. Related to the data about accidents, 104 (59.09%) have suffered typical occupational accident, among them 69 (39.20%) have suffered it once; 47 (36.19%) did not register any accident; 60 (57.69%) were caring some patient during the accident; 47 (45.19%) of them occurred in the ICU; 50 (48.07%) professionals were working during the night period; 69 (66.34%) have suffered perforation; 86 (82.69%) had upper limbs affected; 64 (61.53%) were affected by needle; about the reason of the accident, 89 (60.54%) said it occurred due to carelessness. Related to the accident evolution, 88 (85.57%) did not need to remain off work after accident; 13 (81.25%) remained off work during 15 days; 87 (83.65%) had no sequelae and for 101 (97.11%) it was not necessary rehabilitation. We conclude that typical occupational accident can occur with young workers who admit a knowledge about the subject, however they do almost nothing to prevent it. We believe this research has contributed to the characterization of this kind of accident suffered by the nursery group of a public hospital in Natal, and it can stimulate the creation and reformulation of personal protection against typical occupational accident suffered by nursery professionals