4 resultados para Bicycle helmet
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples
Resumo:
Descriptive exploratory study, prospective, with quantitative approach, performed on the Monsenhor Walfredo Gurgel Hospital Complex (MWGHC), in Natal/RN, aiming to identify injuries by body area and wound severity on drivers who suffered motorcycle accidents, evaluate the severity of injuries and trauma on these drivers and identify the existence of association between wound and trauma severity and some of the accident s characteristics. The population comprised 371 motorcycle drivers, with data collected between October and December 2007. We used as instruments the Abberviated Injury Scale (AIS), Injury Severity Score (ISS) and the Glasgow Coma Scale (GCE1). The results show that, concerning characterization, there was a predominance of the male gender (88.4%), aged between 18 and 24 years (39.90%), originating from the Natal metropolitan region (55.79%), with fundamental-level instruction (51.48%), catholic (75.78%), married (47.98%). 23.18% work on commerce-related activities and 75.20% have income of up to 2 minimum wages. As for the accident s characteristics, the predominant shift was the afternoon (46.36%), received up to one hour after the event (50.67%), transported by countryside ambulances colleagues and relatives (51.21%), 25.34% had the accident on Sunday; 53.91% suffered falls and vehicle rolls; among the collisions there was a predominance of the motorcycle-automoblie type (28.03%); 52,6% were licensed and among these 50.76% had up to one year of license; 65.50% declared not having suffered previous accidents; 65.77% declared waring helmets in the time of the accident; 57.41% said not to have used drugs, and among those who used, alcohol was the most consumed (98.10%). The lowest score evaluated by GCS1 (3 to 8) was linked to drivers who suffered accidents on Saturday (10.3%), those who were not wearing helmets (14.29%) and the victims of motorcycle-pedestrian/animal crashes (13.33%). The body areas most affected had AIS between 1 and 3 (95.76%) and were: external surface (39.90%) and head/neck (33.20%). As for trauma severity, the highest scores (ISS>25) belonged to those who consumed alcohol (30.73%), suffered falls or vehicle rolls (48.9%) and those attended to 3 hours or longer after the accident (50%). We conclude that for motorcycle drivers who suffered accidents, age, gender, weekday, type of accident, use of drugs and the absence of helmet use signal both to the risk of occurrence of these events, as well as for the greater severity of injuries and trauma.
Resumo:
To evaluate the effects of warm-up and stretching, singly or combined, on isokinetic performance and electromyographic activity of the biceps femoris. Materials and methods: Sixty-four volunteers of both sexes, with mean age of 23,1 ± 3,5 years and mean body mass index of 23,5 ± 2,5 Kg/m2 were randomly assigned into 4 groups: control, warm-up (stationary bicycle for 10 minutes), stretching (4 sets of 30 seconds of hamstring muscles static stretching) and warm-up + stretching. All the volunteers were submitted to evaluation pre and post-intervention of the muscle latency time and biceps femoris RMS and the passive torque, peak torque and power of the hamstring muscles. Results: The warm-up + stretching group had reduction of muscle latency time. There was a reduction of RMS during passive torque evaluation in stretching group. The RMS during isometric evaluation was reduced in all experimental groups. The RMS during eccentric evaluation showed reduction in control and warm-up + stretching groups. The passive torque and the eccentric peak torque had no significant differences pre to post-intervention in any group. There was reduction in isometric peak torque in all groups. Conclusion: The warm-up and stretching, when applied in combination can reduce the muscle latency time; stretching protocol promoted neural changes; the protocols used did not alter the muscle viscoelastic properties
Resumo:
In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples
