Análise e projeto de superfícies seletivas de frequência com elementos pré-fractais para aplicações em comunicações indoor

In this thesis, a frequency selective surface (FSS) consists of a two-dimensional periodic structure mounted on a dielectric substrate, which is capable of selecting signals in one or more frequency bands of interest. In search of better performance, more compact dimensions, low cost manufacturing, among other characteristics, these periodic structures have been continually optimized over time. Due to its spectral characteristics, which are similar to band-stop or band-pass filters, the FSSs have been studied and used in several applications for more than four decades. The design of an FSS with a periodic structure composed by pre-fractal elements facilitates the tuning of these spatial filters and the adjustment of its electromagnetic parameters, enabling a compact design which generally has a stable frequency response and superior performance relative to its euclidean counterpart. The unique properties of geometric fractals have shown to be useful, mainly in the production of antennas and frequency selective surfaces, enabling innovative solutions and commercial applications in microwave range. In recent applications, the FSSs modify the indoor propagation environments (emerging concept called wireless building ). In this context, the use of pre-fractal elements has also shown promising results, allowing a more effective filtering of more than one frequency band with a single-layer structure. This thesis approaches the design of FSSs using pre-fractal elements based on Vicsek, Peano and teragons geometries, which act as band-stop spatial filters. The transmission properties of the periodic surfaces are analyzed to design compact and efficient devices with stable frequency responses, applicable to microwave frequency range and suitable for use in indoor communications. The results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as: fractal iteration number (or fractal level), scale factor, fractal dimension and periodicity of FSS, according the pre-fractal element applied on the surface. The analysis of the fractal dimension s influence on the resonant properties of a FSS is a new contribution in relation to researches about microwave devices that use fractal geometry. Due to its own characteristics and the geometric shape of the Peano pre-fractal elements, the reconfiguration possibility of these structures is also investigated and discussed. This thesis also approaches, the construction of efficient selective filters with new configurations of teragons pre-fractal patches, proposed to control the WLAN coverage in indoor environments by rejecting the signals in the bands of 2.4~2.5 GHz (IEEE 802.11 b) and 5.0~6.0 GHz (IEEE 802.11a). The FSSs are initially analyzed through simulations performed by commercial software s: Ansoft DesignerTM and HFSSTM. The fractal design methodology is validated by experimental characterization of the built prototypes, using alternatively, different measurement setups, with commercial horn antennas and microstrip monopoles fabricated for low cost measurements

Uma proposta de FSS fractal com geometria simplificada

Frequency Selective Surfaces (FSS) are periodic structures in one or two dimensions that act as spatial filters, can be formed by elements of type conductors patches or apertures, functioning as filters band-stop or band-pass respectively. The interest in the study of FSS has grown through the years, because such structures meet specific requirements as low-cost, reduced dimensions and weighs, beyond the possibility to integrate with other microwave circuits. The most varied applications for such structures have been investigated, as for example, radomes, antennas systems for airplanes, electromagnetic filters for reflective antennas, absorbers structures, etc. Several methods have been used for the analysis of FSS, among them, the Wave Method (WCIP). Are various shapes of elements that can be used in FSS, as for example, fractal type, which presents a relative geometric complexity. This work has as main objective to propose a simplification geometric procedure a fractal FSS, from the analysis of influence of details (gaps) of geometry of the same in behavior of the resonance frequency. Complementarily is shown a simple method to adjust the frequency resonance through analysis of a FSS, which uses a square basic cell, in which are inserted two reentrance and dimensions these reentrance are varied, making it possible to adjust the frequency. For this, the structures are analyzed numerically, using WCIP, and later are characterized experimentally comparing the results obtained. For the two cases is evaluated, the influence of electric and magnetic fields, the latter through the electric current density vector. Is realized a bibliographic study about the theme and are presented suggestions for the continuation of this work

Modelagem em SystemC-AMS de uma plataforma compatível com o sistema de coleta de dados brasileiro

This work presents simulation results of an identification platform compatible with the INPE Brazilian Data Collection System, modeled with SystemC-AMS. SystemC-AMS that is a library of C++ classes dedicated to the simulation of heterogeneous systems, offering a powerful resource to describe models in digital, analog and RF domains, as well as mechanical and optic. The designed model was divided in four parts. The first block takes into account the satellite s orbit, necessary to correctly model the propagation channel, including Doppler effect, attenuation and thermal noise. The identification block detects the satellite presence. It is composed by low noise amplifier, band pass filter, power detector and logic comparator. The controller block is responsible for enabling the RF transmitter when the presence of the satellite is detected. The controller was modeled as a Petri net, due to the asynchronous nature of the system. The fourth block is the RF transmitter unit, which performs the modulation of the information in BPSK ±60o. This block is composed by oscillator, mixer, adder and amplifier. The whole system was simulated simultaneously. The results are being used to specify system components and to elaborate testbenchs for design verification

Projeto de absorvedores de micro-ondas integrados com superfícies seletivas em frequência

Considering the fact that, the use of wireless communication systems has grown too fast, investigations concerning absorbers of electromagnetic waves has called closer attention of researchers. It is applicable from indoor systems to military applications. Paralleling with this growth, some extremely relevant investigations through Frequency Selective Surfaces (FSS) allows its filter property to be applicable in several systems, for example: reflector antennas, band-pass radomes, and absorbers, which are the main objective of this work. Therefore, the main goal of this work concerns to design micro-waves absorbers through FSS. Thus, the methodology consists basically in two steps: the first step concerns a theoretical and numerical analysis of the structures involved in the process of absorption, the second step, the analysis of the cascaded structures. In order to carry out the analysis, the Equivalent Circuit Method will be used. This method provides characteristics of transmission from the structure, for a plane wave incidence and it requires an extremely limited computing resource in relation if compared to full wave analyses method. Hence, it is useful to allow fast predictions of the development of the structures. Furthermore, a spreading matrix will be used in order to cascade the conductive FSS and the resistive FSS achieving absorption characteristics in the designed band. The experimental results used for the analysis are found in the literature due to the difficulty of building soon, given that it is not a simple construction technique. To conclude, a mathematical development through the Equivalent Circuit Method of a FSS modeling with cross-dipole geometry and a resistive FSS will be presented, as well as the cascading involving the two structures. The same setting is used with a square loop geometry. Besides it, the next steps will be discussed in the conclusion.

Impacts of the Madden-Julian oscillation on intraseasonal precipitation over northeast Brazil

Este estudo tem como objetivo investigar os impactos da oscilação de Madden-Julian (OMJ) na precipitação da região Nordeste do Brasil (NEB). Para tanto foram utilizados dados diários de precipitação baseados em 492 pluviômetros distribuídos na região e cobrindo um período de 30 anos (1981 − 2010). As análises através de composições de anomalias de precipitação, radiação de onda longa e fluxo de umidade, foram obtidas com base no índice da OMJ desenvolvido por Jones-Carvalho. Para distinguir o sinal da OMJ de outros padrões de variabilidade climática, todos os dados diários foram filtrados na escala de 20 − 90 dias; portanto somente dias classificados como eventos da OMJ foram considerados nas composições. Uma análise preliminar baseada apenas nos dados de precipitação foi feita para uma pequena área localizada no interior semiárido do NEB, conhecida como Seridó. Essa microrregião é uma das áreas mais secas do NEB e foi reconhecida pela Convenção das Nações Unidas para o Combate à Desertificação e Mitigação dos Efeitos das Secas como particularmente vulnerável à desertificação. Composições de anomalias de precipitação foram feitas para cada uma das oito fases da OMJ durante Fevereiro-Maio (principal período chuvoso da microrregião). Os resultados mostraram a existência de variações significativas nos padrões de precipitação (de precipitação excessiva à deficiente) associados à propagação da OMJ. A combinação dos sinais de precipitação obtidos durantes as fases úmidas e secas da OMJ mostrou que a diferença corresponde cerca de 50 − 150% de modulação das chuvas na microrregião. Em seguida, uma investigação abrangente sobre o papel da OMJ sobre toda a região Nordeste foi feita considerando-se as quatro estações do ano. Os resultados mostraram que os impactos da OMJ na precipitação intrassazonal do NEB apresentam forte sazonalidade. A maior coerência espacial dos sinais de precipitação ocorreram durante o verão austral, quando cerca de 80% das estações pluviométricas apresentaram anomalias positivas de precipitação durante as fases 1 − 2 da OMJ e anomalias negativas de precipitação nas fases 5 − 6 da oscilação. Embora impactos da OMJ na precipitação intrassazonal tenham sido encontrados na maioria das localidades e em todas as estações do ano, eles apresentaram variações na magnitude dos sinais e dependem da fase da oscilação. As anomalias de precipitação do NEB observadas são explicadas através da interação existente entre as ondas de Kelvin-Rossby acopladas convectivamente e as características climáticas predominantes sobre a região em cada estação do ano. O aumento de precipitação observado sobre a maior parte do NEB durante o verão e primavera austrais encontra-se associado com o fluxo de umidade de oeste (regime de oeste), o qual favorece a atividade convectiva em amplas áreas da América do Sul tropical. Por outro lado, as anomalias de precipitação durante o inverno e outono austrais apresentaram uma variabilidade espacial mais complexa. Durante estas estações, as anomalias de precipitação observadas nas estações localizadas na costa leste do NEB dependem da intensidade do anticiclone do Atlântico Sul, o qual é modulado em grande parte por ondas de Rossby. As características topográficas do NEB parecem desempenhar um papel importante na variabilidade observada na precipitação, principalmente nestas áreas costeiras. A intensificação do anticiclone aumenta a convergência dos ventos alísios na costa contribuindo para a ocorrência de precipitação observada à barlavento do planalto da Borborema. Por outro lado, o aumento da subsidência parece ser responsável pelos déficits de precipitação observados à sotavento. Tais condições mostraram-se típicas durante o predomínio do regime de leste sobre a região tropical da América do Sul e o NEB, durante o qual ocorre uma diminuição no fluxo de umidade proveniente da Amazônia.

Análise e otimização de superfícies seletivas de Frequência utilizando redes neurais artificiais e algoritmos de otimização natural

The bidimensional periodic structures called frequency selective surfaces have been well investigated because of their filtering properties. Similar to the filters that work at the traditional radiofrequency band, such structures can behave as band-stop or pass-band filters, depending on the elements of the array (patch or aperture, respectively) and can be used for a variety of applications, such as: radomes, dichroic reflectors, waveguide filters, artificial magnetic conductors, microwave absorbers etc. To provide high-performance filtering properties at microwave bands, electromagnetic engineers have investigated various types of periodic structures: reconfigurable frequency selective screens, multilayered selective filters, as well as periodic arrays printed on anisotropic dielectric substrates and composed by fractal elements. In general, there is no closed form solution directly from a given desired frequency response to a corresponding device; thus, the analysis of its scattering characteristics requires the application of rigorous full-wave techniques. Besides that, due to the computational complexity of using a full-wave simulator to evaluate the frequency selective surface scattering variables, many electromagnetic engineers still use trial-and-error process until to achieve a given design criterion. As this procedure is very laborious and human dependent, optimization techniques are required to design practical periodic structures with desired filter specifications. Some authors have been employed neural networks and natural optimization algorithms, such as the genetic algorithms and the particle swarm optimization for the frequency selective surface design and optimization. This work has as objective the accomplishment of a rigorous study about the electromagnetic behavior of the periodic structures, enabling the design of efficient devices applied to microwave band. For this, artificial neural networks are used together with natural optimization techniques, allowing the accurate and efficient investigation of various types of frequency selective surfaces, in a simple and fast manner, becoming a powerful tool for the design and optimization of such structures