Otimização de sistema de bombeamento com energia eólica: sistema de bombeamento de São Gabriel/BA

After the Protocol of Kyoto and of the ECHO 92 - Rio de Janeiro, the attentions of the world focus to the preservation of the environment and of the maintainable use of the natural resources. People were looking for preserving environment for the future generations. Ever since, solutions are looked for the supply of energy in its more acquaintances forms and the substitution of the use of fossil fuels for the such alternative forms as: Photovoltaics, solar heat systems for water, wind , bio-diesel, etc. and in this context the Company of Engineering of the State of Bahia - Cerb changed a diesel pumping system by an wind one, It´s the first community system of this nature in Bahia. Facing problems with the model, a Cerb involved the academic segment of the Federal Center of Technological Education of Bahia Cefetba looking for a solution. This work intends to demonstrate the possibilities of optimization of the pumping communit system that supply water to approximately 50 people in the place of Romão, municipal district of São Gabriel-Ba. Technical reports were published in AGRENERGD2004-Unicamp SP and Scientific Magazine ETC,Cefetba, 2005. A simulation of the increase of energy is presented for heights of 15 and 20m, considering the eletromecanical balance from the pumping energy to the wind turbine. From the accomplished bibliographical revision, we emphasized the mechanical aspects of the engineering once in UFRN, those studies concentrate on the Department of Mechanical Engineering while, in others eletroelectronic are more emphasized. Finally, documents that we judged important were enclosed for the perfect understanding of this work

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Desenvolvimento de uma unidade pirolítica com reator de cilindro rotativo: obtenção de bio-óleo

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Hidroquímica do estuário do Rio Caravelas, Caravelas - BA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Apitidão funcional e comportamentos relacionados à saúde em mulheres idosas do município de Jequié-BA

The identification of the factors that interfere in the decline of functional conditions is useful in the planning of actions addressing the improvement in the conditions of the lives of elderly people. The purpose of this investigation was to analyze the relationship between social demographics and health aspects of the functional condition in elderly women of low income of the Brazilian northeast. This crosssectional study involved a representative sample of 222 women with an average age of 70 years (± 7.1), belonging to coexisting groups and that were resident in the urban area of the municipal district of Jequié /Bahia. In order to achieve this objective, a battery of physical tests of functional aptitude was carried out previously tested in pilot study, anthropometric measurements collected with a comparison of the measures referred to the reported weight and height as well as the application of an interview with questions containing subjects related to social demographic variables, clinical conditions and health, physical conditions and behaviors. Descriptive statistics Proceedings (frequency, average, standard deviation and percent distribution) were used for statistic analysis, and the calculation of the respective odds ratio by binary logistics regression, for the analysis of factors hierarchically grouped; p<0.05. The prevalence of 56% (n=122) of women considered with moderated or serious type of functional limitations was found, In which from multi-varied hierarchical analysis, significant association was verified with the age group over 80 years (p=0.02), conditions of widowhood (p=0.04), presence of arterial hypertension (p=0.001), and physical inactivity during leisure time (p=0.03). On the other hand for functional incapacities the prevalence was of 46.8% (n=104) being associated to the increase of the age (p=0.01), hospitalization (p=0.02), absence of physical activities along their lives (p=0.001) and the occurrence of alterations in the cognitive function (p=0.001). The normative table for the parameters of physical fitness generated conducive to health professionals in the diagnosis of health conditions and the prescription of physical exercises. The identified characteristics that are associated with the functional limitations / functional incapacities suggest a complex causal net in the determination of the functional condition in elderly women. However, actions addressed to the incentive of the practice of physical activities in the leisure time and the preservation of the cognitive function can contribute to a life with more quality for these people. This research was multidisciplinary approach to involve elements of psychology, nutrition and Physical Education in the elucidation of the object of study related to the functional condition of elderly women

Relação entre ambiente familiar e capacidade funcional de idosos residentes no município de Jequié-BA

(Objective) Assess the functional capacity and determine the difference between the means of functional capacity (basic and instrumental activities of daily living) and the age groups of elderly residents in an outlying area in the hinterland of Bahia/Northeast of Brazil. (Methods) Analytical study with cross-sectional design and a sample of 150 elderly individuals enrolled in four Health Units in the municipality of Jequié, Bahia, Brazil. The instrument consisted of sociodemographic and health data, the Barthel Index and the Lawton scale. (Results) In all, 78.00% of the elderly were classified as dependent in the basic activities and 65.33% in the instrumental activities of daily living. Using the Kruskal- Wallis test, we found a statistically significant difference between the means of instrumental activities and the age groups (p= 0.011). (Conclusion) An elevated number of elderly were classified as dependent in terms of functional capacity and increased age is related to greater impairment in the execution of instrumental activities of daily living

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Prevalência e fatores associados à dor em professores de educação física em academias de ginástica da cidade do Salvador-BA

Physical Education professionals are usually exposed to excessive physical workloads that evolve into painful symptomatology and muscle and bone disorders that originate from the work-related exercises. Purposo: The goal of this study was to investigate the prevalence and factors associated with pain painful symptomatology in teachers in gymnastics academies. An analytical transversal cut study was performed involving 163 gymnastics teachers working in the main gyms in the city of Salvador-BA. For evaluation of pain, validated versions in Portuguese of the McGill Protocol and the Wisconsin Pain Inventory were used. For obtain results of descriptive statistical analysis of the collected data was performed, followed by TStudent, and Pearson and Spearman correlation tests to verify possible correlations between the presence of pain and other variables which were considered independent. Finally, for the identification of potential risk factors associated with pain, a binary logistic regression analysis was performed. For all statistical analysis, we cnsidered p< 0.05. Results: The painful symptoms was reported by 88.3% of the subjects surveyed. High pain levels were observed in 63.8% of the interviewed professionals, where the intensity varied from moderate to severe. Pain in the lumbar region was present in 55.2% of subjects. Positive correlations were found between the level of pain intensity and the variables related with the workload activity and daily life of the teachers in almost all body joints analyzed. Some factors had been verified associates to the painful sintomatologia as the age of the professionals, the daily hours load of labor work, and the lack of interval of rest between the lessons. Conclusions: We found a high prevalence in gym teachers working in the city of Salvador-BA, which interfered in various daily activities of their home and professional lives. The most affected region was the lumbar region, followed by the knees, neck, shoulders, ankles, hands, hips, feet, elbows and forearms. The factors associated with development of painful symptomatology were the age of the professionals, daily hours of work and the lack of rest intervals between lessons. The high prevalence of pain in Physical Education teachers can be regarded as a serious occupational health problem, which would demand the urgent deployment of preventive intervention programs to minimize the impact of pain among these professionals

Política ambiental e desenvolvimento urbano na serra do periperi em Vitória da conquista - BA

This present dissertation has as its aim of study an analysis of the environmental policy and the urban development at the Periperi Hill. Such analysis arose due to concerns related to the disordered occupation in that Hill and also due to the environmental problems caused by this occupation. By opening roads and developing areas for housing and mineral extraction activities, man has altered considerably the landscape natural balance in that hill and caused among other difficulties, grave environmental problems, such as the erosin at the hill coast, deforestation, obstruction and pollution of the Verruga River. Therefore, in 1998 it was decreed by the Municipal Public Power that Periperi Hill became an Environmental Preservation Area with a Unit of Conservation known as Periperi Hill Municipal Park, an environmental policy implemented at the Hill that aims to hinder this occupation and to protect areas that are of great environmental importance to the city. It looking at what is now exposed and aiming to consider the Periperi Hill s environmental policy and the relationship of the occupation process, that this present work has the objective of understanding how the expansion of the city s urban network in Vitória da Conquista BA and the mineral activities cause an influence in the process of environmental degradation at the Periperi Hill

A magia do cinema na praça:apropriação do espaço e sociabilidade em Salvador-BA

It s in the city spaces, molded from the uses and daily appropriations, that life is woven, as a product of the social relationships from the accumulation of history along with the present day fabric. Within this relationship, the old and the new are elements which make up this tapestry, as a result of the contribution of successive generations. The public square is seen as an example of this relationship, since it consists of a fertile space for opportunities of urban life coexistence. It is within the trace of these considerations that the present study emerges regarding the appropriation and sociability of the Tomé de Sousa Square, located in the city of Salvador, BA, having as its main focus the special relation between the cinema and the public square, as it relates to the space of the exhibition of cinematographic art. The showing of films in public squares makes possible a distinctive means of appropriation which has occurred ever since the beginning of the cinema. Today in Brazil, projects of this nature abound, which aim at presenting the seventh art to a great portion of the population which doesn t have access to conventional movie theater projection rooms. This particular Projeto Cinema na Praça Cinema in the Square Project carried out in Salvador, has become the empirical reference point for such work. This journey reveals the fascination that this great art has woven through time, attracting and charming multitudes. The cinema touches people in a special way, stirring up affectionate feelings, which are reflected in multiple social practices. Regarding this work, what stands out above all are the projections in the squares, initiatives which make it possible for the films to be watched collectively. What was taken into account in order to carry out this work were the reports of those who came regularly to watch the cinema in the Square sessions, those involved with the cinema projects team, and the film makers. To do the work, besides a bibliographical revision, observations were made of participants in the Tomé de Sousa Square, taken from semi-structured interviews with people involved with the film projection projects and those who came regularly to the cinema in the Square sessions. Also investigations were made in newspapers, printed magazines and the internet, from document and iconographic sources. The photographic documentation proved to be an important contribution to the field work. The research therefore develops from the understanding that the social practices are what make possible the uses of and the appropriation of the spaces. Within this perspective the public square emerges as a privileged locus where possibilities flourish for multiple manifestations that social practices can generate

WI-BIO: redes de monitoramento de pacientes em ambientes de automação hospitalar utilizando o padrão IEEE 802.11

The monitoring of patients performed in hospitals is usually done either in a manual or semiautomated way, where the members of the healthcare team must constantly visit the patients to ascertain the health condition in which they are. The adoption of this procedure, however, compromises the quality of the monitoring conducted since the shortage of physical and human resources in hospitals tends to overwhelm members of the healthcare team, preventing them from moving to patients with adequate frequency. Given this, many existing works in the literature specify alternatives aimed at improving this monitoring through the use of wireless networks. In these works, the network is only intended for data traffic generated by medical sensors and there is no possibility of it being allocated for the transmission of data from applications present in existing user stations in the hospital. However, in the case of hospital automation environments, this aspect is a negative point, considering that the data generated in such applications can be directly related to the patient monitoring conducted. Thus, this thesis defines Wi-Bio as a communication protocol aimed at the establishment of IEEE 802.11 networks for patient monitoring, capable of enabling the harmonious coexistence among the traffic generated by medical sensors and user stations. The formal specification and verification of Wi-Bio were made through the design and analysis of Petri net models. Its validation was performed through simulations with the Network Simulator 2 (NS2) tool. The simulations of NS2 were designed to portray a real patient monitoring environment corresponding to a floor of the nursing wards sector of the University Hospital Onofre Lopes (HUOL), located at Natal, Rio Grande do Norte. Moreover, in order to verify the feasibility of Wi-Bio in terms of wireless networks standards prevailing in the market, the testing scenario was also simulated under a perspective in which the network elements used the HCCA access mechanism described in the IEEE 802.11e amendment. The results confirmed the validity of the designed Petri nets and showed that Wi-Bio, in addition to presenting a superior performance compared to HCCA on most items analyzed, was also able to promote efficient integration between the data generated by medical sensors and user applications on the same wireless network