43 resultados para Ataque preventivo (Ciência militar)
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing
Resumo:
Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing
Resumo:
ENDERS,Bertha Cruz, FERREIRA,Priscila Brigolini Porfírio, MONTEIRO, Akemi Iwata.A ciencia-açao: fundamentos filosoficos e relevancia para a enfermagem. Revista Texto Contexto em Enfermagem, Florianópolis, v.19, n.1,p.161-7.Jan/Mar.2010.
Resumo:
MEDEIROS, A. L.; VANTI, Nadia. Vannevar Bush e as matrizes discursivas de As we may think: por uma possível história da Ciência da Informação. Informação & sociedade:Estudos. João Pessoa, v. 21, p. 31-39, 2011
Resumo:
VANTI, Nadia. A cientometria revisitada à luz da expansão da ciência, da tecnologia e da inovação. PontodeAcesso, Salvador, v. 5, p. 5-31, 2011
Resumo:
Serão analisados aspectos históricos e estruturais dos quadrados mágicos e apresentados os materiais resultantes dessa investigação para efeito da composição de uma obra para coro, solistas e orquestra, a Paixão . O quadrado mágico, um dispositivo de características de construção matemáticas, adquiriu contornos místicos ao longo da história, por suas propriedades de simetria e beleza. O processo criativo dentro de uma perspectiva determinística, procura analisar o papel de estruturas pré-estabelecidas para a obtenção de materiais destinados a integrar o repertório de elementos pré-composicionais.
Resumo:
A prática de enfermagem envolve o enfermeiro da clínica como agente de deliberação e ação, confrontando situações do cotidiano e assumindo, através de conhecimento científico, experiências anteriores ou por conceitos próprios e intuitivos, formas específicas de ver e agir na prática. O agir constitui fonte de conhecimento passível de acesso por métodos de investigação interpretativos. O objetivo deste trabalho é apresentar, analiticamente, a filosofia da Ciência-Ação em sua relação com a construção do conhecimento na enfermagem. Explica-se a Ciência-Ação como método inovador de inquérito e a sua tradição filosófica na abordagem nas ciências sociais, e se discute a sua articulação com a proposta epistemológica da enfermagem. Sugere-se a adoção dessa vertente em estudos de enfermagem, pelo seu enfoque na reflexão sobre as ações do enfermeiro e na prática como fonte de conhecimento. Conclui-se que a Ciência-Ação possui potencial para o avanço da teoria específica da prática da enfermagem, do conhecimento próprio da enfermagem
Resumo:
A pesquisa aborda o uso das Tecnologias de Informação e Comunicação, que vem revolucionando as atividades e ocasionando muitas mudanças relacionadas ao acesso e uso de informações. O objetivo foi analisar o grau de utilização do conhecimento científico produzido pelos Programas de Pós-Graduação das Universidades Públicas Brasileiras, através da BDTD, pelos mestrandos dos referidos programas. Nos procedimentos metodológicos realizados, procurou-se inicialmente analisar o amplo espectro da população do corpus da pesquisa. Em razão da impossibilidade de trabalhar com os Programas de Pós-Graduação como um todo, optou-se por fazer um recorte, elegendo os cursos de Pós-Graduação em Ciência da Informação, vez que estes representam o principal segmento social de interesse da pesquisa. Foi utilizado o método de estudo de usuários, onde se optou por adotar o grupo, “estudos orientados aos usuários”, que identifica as necessidades e comportamento de acesso e uso da informação. Para coletar os dados, elaborou-se um questionário semi-estruturado com 25 questões, que versavam sobre o uso, dificuldades de acesso e recuperação da informação, bem como a satisfação na utilização dessa fonte informacional. Dentre os vários resultados obtidos, podemos destacar o fato de que a maioria dos mestrandos (71,8%) só teve contato com a BDTD somente no momento em que se encontrava cursando o mestrado e, somente 24,3%, tiveram contato durante a graduação. Estes resultados representam um problema, que pode afetar o bom desempenho do projeto BDTD, o qual consiste em disseminar e divulgar a produção científica dos Programas de Pós-Graduação das Universidades Públicas Brasileiras para a sua comunidade. Foi observado também, que os mestrandos oriundos do curso de Biblioteconomia tende a ter contato com a BDTD bem mais cedo do que mestrandos de outros cursos de graduação. A fim de minimizar o problema detectado, propõe-se uma divulgação mais eficaz na graduação através de dois procedimentos: Primeiro, o docente deve fazer uma divulgação mais eficaz da BDTD junto aos discentes de todos os cursos de graduação; segundo: deverá ser feita a divulgação na mídia eletrônica, através da inserção de ícones da BDTD, nos portais dos Departamentos dos Cursos de Graduação das Universidades Públicas Brasileiras. Acredita-se que com estes procedimentos seja possível aperfeiçoar o uso dessa fonte de informação científica.
Resumo:
The Federal Institution for Education, Science and Technology, in its historical path, has been living different changes. The transformations occurred along the way have been determined by coercive forces from the institutional environment, which has became more and more broad and complex throughout the time, obtaining diverse characteristics and new elements such as non institutional factors1 which started to contribute with the other changes. In this context, this work aims to study the isomorphic practices of the managers in the institutional changes process of the IFRN in 1998 and 2008, as of a theoretical coevolutionary perspective (CHILD; RODRIGUES; LEWIN; CARROL; VOLBERDA, 2003). This theory brings a new point of view for the organization analysis to the organizational studies, since it offers a non deterministic and non linear lection of the evolution process, which means, a coevolution. Thus, the organizations and their institutional and non institutional environment auto evolve, auto organize and auto reproduce. Therefore, the institutional and non institutional factors of the macro environment keep a continuous interdependence relationship with the organizations. For the means of this study, it is important to understand that is impossible to comprehend the object, the isomorphic practices, without considering that the previous institutional changes and its evolutions, its continuations and discontinuations, important in the coevolution process. As such, to call upon the institutional historical track is a fundamental aspect to materialize this study, for the recursive movement is indeed present in the coevolution. Another important point to make this research effective is that it is not possible to abdicate from the hologramatic view2 of this study, which considers the object, the isomorphic practices, part of the whole and this whole is also in the parts, therefore it is impossible to comprehend the object of study outside the context where it belongs. With this, as of the objective previously proposed, it is necessary to describe the characteristics of coevolution of the institutional changes related in 1998 and 2008; analyze the dynamic of the isomorphic mechanisms in its respective institutional change process; and describe the lessons learned which the isomorphic practices left to the IFRN, regarding its benefits and difficulties. All these transformations happened through coercive forces3 of the institutional environment. As of the Nineties, these forces became stronger, the environment became broader and more complex, with the emergency of new environmental factors. This study proposed to study the managing process and its practices, related to the micro environment, although it is required to articulate these actions, the demands and requirements from the macro environment. To make this research effective, semi structured interviews have been conducted with the managers who participated in both institutional change processes. In the results analysis, it has been possible to verify the particularity of each change, the one from 1998 with a strong normative action of the managers against coercive forces from the government for the search of recognition and the institutional legitimation and the one in 2008, which has been characterized by the normative action by managers in agreement with the coercive forces from the government, in favor of the government policy for the technological professional education. However, the results analysis it is possible to notice the evidence of a belonging feeling from the interviewed managers
Resumo:
The research aimed to understand the challenges for the implementation of the proposed integration between the Civil Police and the Military Police in Rio Grande do Norte to the proposals of the SUSP. This study aimed to explore the gap with regard to the deepening of the possible causes that may hinder the implementation of integrated working between the police in public security, through a specific analysis on the state of Rio Grande do Norte. Was based on a theoretical framework that includes policies: general concepts, the steps of a public policy, the implementation stage , public security : conceptual definitions, policies on security in Brazil, the structure of public security in Brazil and systems police, Military Police x Civil Police: Roles and conflicts , integrating public security: the challenges to be overcome, the Unified public Safety (SUSP) and the main difficulties in the integration of the police. Being classified as to the purposes as an exploratory research on how to approach ranks as qualitative. The research unit was the Center for Integrated Operations Public Safety (CIOSP) through three subjects who were the chief CIOSP, the representative of the military police acting with the CIOSP, and representative civil police also active with the CIOSP. These subjects were chosen because of the understanding that individuals occupying senior positions would have more ability to respond to questions that guide the research problem. Data were collected through a set of interviews, qualitative data analysis was performed based content analysis, based on the definition of categories of analysis, gated time cross. With the results, it was revealed that the main problems of integration between the state police are treatment protocols, lack of political will and lack of infrastructure. The relationship between the Military Police and Civil Police in Rio Grande do Norte has differing cultural aspect, but can be considered as good value, professionalism and integrated operations. The implementation of CIOSP-RN followed the characteristics of the top-down model, the main difficulties in implementing the proposals of the SUSP, lack of own resources, the lack of standardization in public safety and the lack of professional training of public safety. It was concluded that with respect to the challenges to the implementation of the proposed integration between the Civil Police and the Military Police in Rio Grande do Norte to the proposals of the SUSP, the actions follow the characteristics of the top-down model, with no autonomy of administrators public to say in decisions, which restricts the view of the public safety of the state
Resumo:
In the first decades of 20th century the just instituted Brazilian Republic faced the challenge to modernize the country. Considering that the progress was associated with the exhaustion of the forest reserves and with climatic changes, two big issues were seen as fundamental: To Fight the Droughts and To Defend the Forests; headed by professionals who were dedicated to these ideals. This research starts from the premise that these were the main challenges enforced by nature to the Brazilian development; the general objective was delimited in the search to understand the meaning and the conception of the natural world by this group of professionals who faced the shock between modernizing the country and conserving its natural resources. Aiming to contribute with the construction of the Brazilian environmental history and to bring historical elements to the debate about the environment in the country, the author concentrates his attention to the analyses, the discussions and the actions that preceded the regulation on the use of natural resources and the implementation of the environmental legislation in Brazil, occurred in 1934. The investigation uses as methodological basis the theoretical directions of environmental history, using sources of data still little explored and valued. In such way, it is taken as starting point some published papers about this subject during the period between 1889 and 1934 in two technical magazines the Revista Brazil Ferro-Carril and the Revista do Club de Engenharia. National engineering played a basic role in this process while arguing, projecting and constructing the development. The formulated proposals, after being divulged, had fomented the interchange with other professionals and had favored the advance of ambient questions in Brazil, in the sense to preserve natural resources, to construct more harmonic relations between the society and the nature and to equate the development with the environment preservation
Resumo:
The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation
Resumo:
The research and development of nanostructured materials have been growing significantly in the last years. These materials have properties that were significantly modified as compared to conventional materials due to the extremely small dimensions of the crystallites. The tantalum carbide (TaC) is an extremely hard material that has high hardness, high melting point, high chemical stability, good resistance to chemical attack and thermal shock and excellent resistance to oxidation and corrosion. The Compounds of Tantalum impregnated with copper also have excellent dielectric and magnetic properties. Therefore, this study aimed to obtain TaC and mixed tantalum oxide and nanostructured copper from the precursor of tris (oxalate) hydrate ammonium oxitantalato, through gas-solid reaction and solid-solid respectively at low temperature (1000 ° C) and short reaction time. The materials obtained were characterized by X-ray diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), Spectroscopy X-Ray Fluorescence (XRF), infrared spectroscopy (IR), thermogravimetric (TG), thermal analysis (DTA) and BET. Through the XRD analyses and the Reitiveld refinement of the TaC with S = 1.1584, we observed the formation of pure tantalum carbide and cubic structure with average crystallite size on the order of 12.5 nanometers. From the synthesis made of mixed oxide of tantalum and copper were formed two distinct phases: CuTa10O26 and Ta2O5, although the latter has been formed in lesser amounts
Resumo:
With the increasing of demand for natural gas and the consequent growth of the pipeline networks, besides the importance of transport and transfer of oil products by pipeline, and when it comes to product quality and integrity of the pipeline there is an important role regarding to the monitoring internal corrosion of the pipe. This study aims to assess corrosion in three pipeline that operate with different products, using gravimetric techniques and electrical resistance. Chemical analysis of residues originated in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used to characterize the products of corrosion of the pipelines. The corrosion rate by weight loss was analyzed for every pipeline, only those ones that has revealed corrosive attack were analyzed located corrosion rate. The corrosion potential was classified as low to pipeline gas and ranged from low to severe for oil pipelines and the pipeline derivatives. Corrosion products were identified as iron carbonate, iron oxide and iron sulfide
Resumo:
The kinanthropometric characteristics are used by the sports science as selection criteria and detection of talents. Hence, this study aimed at comparing the anthropometrical profile, the body composition, the somatotype and the vertical jumps of the beach volleyball players. This study consists of 79 male beach volleyball players, being forty nine (n=49) Brazilian participants of the National Circuit and thirty (n=30) of 15 countries participating in the XV Pan American Games. In order to analyze the vertical jumps of the Brazilian the participants were allocated into two groups (G1 and G2) in agreement with the national ranking of their teams. The vertical jump protocol developed by Smith and collaborators was used to evaluate the vertical jumps of spike and block. The Heath-Carter anthropometrical technique (1990) was used for calculating the somatotype. The Student s t test with the Bonferroni adjustment was used to calculate the differences among the investigated variables. The multiple regression analysis was used to identify the contributions of the anthropometrical variables in the performance of the vertical jumps and the multivariance analysis was used to calculate the differences among the components of the somatotype. The Brazilian athletes of G1 were better than G2 in the spike jump (p <0.01), block jump (p <0.01) and in the block difference (p <0.01). The prediction model of the spike jump of G2 included the body mass and standing spike reach (adjusted R2 = 0.77), the body mass and the standing block reach were also included in the model of the block jump (adjusted R2 = 0.73). The regression model of G1 was not statistically significant. As for the somatotype, statistically significant differences were found between the Brazilians and the Pan Americans (Wilks' lambda = 0.498; p <0.05). The Brazilian somatotype was classified as balanced mesomorph (2.7-4.3-3.0) and the Pan American somatotype as endomorphic mesomorph (3.5-4.6-2.4). As to the specific position of the block game (2.8-4.3-2.9) and the defense game (2.6-4.4-3.0), the Brazilian somatotype was classified as balanced mesomorph and the Pan American somatotype, the block (3.7-4.4-2.4) and the defense (3.4-4.9-2.3), was classified as endomorphic mesomorph. In conclusion, the vertical jump height (spike and block) influences the male Brazilian beach volleyball players performance. The physical type of the Brazilian blockers and defenders was similar with relationship to the somatotype. The Brazilian and Pan American beach volleyball players differ in terms of kinanthropometric characteristics. This work had a multidisciplinary feature with the participation of several departments and laboratories, like the Physiotherapy Department, the Nutrition Department, the Physical Education Laboratory, thus corroborating the multidisciplinary research feature