Representações discursivas no discurso político. Não me fiz sigla e legenda por acaso : o discurso de renúncia do senador Antonio Carlos Magalhães (30/05/2001)

O objetivo deste trabalho é investigar como as representações discursivas do locutor e dos alocutários são construídas no discurso de renúncia ao mandato de senador, proferido por Antonio Carlos Magalhães (ACM), na 62ª sessão deliberativa ordinária, em 30/5/2001. A perspectiva teórica que adotamos situa-se no campo da Linguística do Texto, com foco na abordagem da Análise Textual dos Discursos ATD (Adam, 2011). A noção de representação discursiva apresentada pela ATD constitui um dos aspectos da dimensão semântica do texto e baseia-se parcialmente nos trabalhos de Grize sobre a esquematização (1990, 1996). Complementamos as categorias de análise com contribuições que nos permitem detalhar a expressão linguística, textual, e discursiva das representações discursivas (Neves, 2006; Castilho 2010; Rodrigues, Passeggi, Silva Neto, 2010; Rodrigues et al. 2012; Passeggi, 2012). O enfoque metodológico é qualitativo, descritivo e interpretativista (Minayo, 1994; Trivinõs; 1987; Gil, 2002). Os procedimentos de análise utilizam as categorias semânticas de referenciação, predicação, modificação (de referentes e predicações), localização espacial e temporal, conexão e comparação. A representação discursiva do locutor (ACM) é constituída pelo conjunto de representações mais específicas, expressas nas referenciações e nas suas modificações: vítima; político; sigla; baiano, nordestino; presidente do senado; senador confiante; condenado. ACM, como protagonista, assume sempre a sua voz no discurso, manifesta seus pontos de vista e posiciona-se como sujeito ativo, consciente da importância do seu papel político e social, que o torna alvo e vítima das ações dos adversários. Complementando essa referenciação, as predicações e suas modificações se expressam através de verbos de ação, em especial, verbos na 1ª pessoa do singular que marcam o tempo presente, real e conclusivo de ações que constroem um cenário positivo para si mesmo. A localização temporal e espacial, indica as ações realizadas pelos participantes nas diversas etapas temporais selecionadas pelo texto, articuladas a três espaços principais: o Senado Federal, o Brasil e, naturalmente, a Bahia. Por sua vez, conectores adversativos (sobretudo, mas ), explicativos e condicionais acompanham e estruturam o ritmo argumentativo do discurso de renúncia de ACM

Avaliação da temperatura de cristalização da parafina em sistemas: parafina, solvente e tensoativo

The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density

A imagem do Brasil na mídia impressa portuguesa: um estudo do caso diário de notícias e público

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Caracterização de atapulgita visando aplicação para reforço de materiais poloméricos

The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

O progama empregador de última instância: Sua relevância em tempos de crises financeiras e sua aplicabilidade ao Brasil.

This dissertation aims to continue the work developed previously concerning the properties of the employer of last resort program (ELR) that would be able to promote a complete elimination of the involuntary unemployment from the economy, so much of the unemployment generated by structural problems as for problems of the conjuncture, as the present world financial crisis. Besides, it intends to deepen the study concerning the applicability of that program to the Brazilian economy, estimating their potential target population in the country and the cost with the workers' remuneration. It was presented the ELR theoretical-conceptual structure and a debate concerning their economic viability; the program properties that turn it more efficient than the onetary and fiscal policies (PMFs) in the fight against involuntary unemployment in times of financial crises; a study on its applicability to the Brazilian socioeconomic specificities and an estimate of their potential target population and of the annual wage cost in the country, as a whole, and in the specific case of the Northeast region and of the state of Rio Grande do Norte.

Compreendendo a educação para a inclusão digital: uma análise dos sentidos atribuidos pelos monitores das escolas de inclusão digital e cidadania da EMATER-RN

According to the methodological presuppositions of the understanding interview (KAUFMAAN, 1996), the present work aims to understand the Digital Inclusion starting from the oral speeches of eight monitors of Digital Inclusion and Citizenship Schools of the Technical Assistance and Rural Extension Company EMATER, located in municipal districts that belong to six regions of the state of Rio Grande do Norte. It also had the intention to analyze it (the Digital Inclusion), while educational process and its relation with the citizenship. In its first part, an analysis of the discussions about digital inclusion was developed, and a reflection about the new technologies in current times, followed by a contextualization of the rural space and the methodological course of the study, when its guiding axis and the travelled roads were presented, where the object of study is built slowly and progressively through a theoretical elaboration that increases day by day, as of the technologies forged in the field of research and formation of the subject. The second part presents the study of the collected information, that is organized in three chapters denominated as follows: Conceptions of the local context; What does digital inclusion mean? and The monitor as an educator. The reports do evidence a peculiar dissatisfaction with the social reality where they are found, that contradicts the positive reflections and perspectives of the studied authors, once that, within the actual conjuncture, the rural space has acquired another meaning, no longer being seen as a far late place. By trying to define the digital inclusion, the monitors make an association with change, the access to knowledge, active participation in society and improvement of the life conditions. Here a mission sense stands out, related to the ideological precept, which has been managing its activities. Towards the monitor‟s relation within the classroom, the senses evidence how they are and how they have been developing their daily activities. Tensions, fears and insecurities are identified, but at the same time, a compromise. The final considerations implicate to the need of reorientations in the formative process of this professionals, detaching the importance of their activities while agents of inclusion and social transformation

Terceirização em tecnologia da informação sob os aspectos de estratégia, tomada de decisão e análise de investimentos :estudo de múltiplos casos em três organizações franqueadas da Coca-Cola do Brasil

Desde a criação da tecnologia e do seu uso pelas empresas, a relação custo e benefício nem sempre foi bem elucidada tanto para os responsáveis pela área de tecnologia quanto para a alta direção. Mas, apesar disto, cada vez mais as organizações investem maciçamente em tecnologia, esperando que esta seja a solução para diversos problemas. Por isto, esta questão tem se tornado crucial para o processo de tomada de decisões, visto que investimentos nesta área costumam ser dispendiosos e, na atual conjuntura, estas análises precisam ser extremamente criteriosas para que se miniminizem as possibilidades de insucesso dos projetos, principalmente numa economia estabilizada e de concorrência acirrada. Uma das alternativas que as empresas têm buscado para atingir o sucesso e correr menos riscos é a terceirização da área de TI. Partindo desta visão, a presente dissertação tem por objetivo realizar uma investigação sobre a terceirização dos serviços de TI em todos os seus aspectos, isto é, desde a sua motivação, serviços efetivamente terceirizados, vantagens, desvantagens e possíveis obstáculos, a visão do alinhamento estratégico da TI, os processos de gestão de contratos e formas de controle e, por fim, tendências futuras. Trata-se de uma pesquisa de múltiplos casos, envolvendo franquias do Sistema Coca-Cola no Brasil. O estudo apresenta uma pesquisa bibliográfica sobre o processo de tomada de decisão empresarial, a análise de investimentos, a gestão e a terceirização da TI, o que permitem definir as dimensões de análise da pesquisa. Na pesquisa de campo foram entrevistados os gerentes da área de TI, nas cidades de Brasília-DF, Goiânia-GO e Ribeirão Preto-SP. A pesquisa de campo permitiu identificar como as mesmas avaliam seus investimentos em TI, como esta área é gerenciada, o que as levou a optar pela terceirização e como os processos terceirizados afetam a organização. Por se tratar de uma pesquisa qualitativa, optou-se por analisar comparativamente as três organizações. Com a realização deste estudo, obtiveram-se, como principais resultados, que as organizações estão utilizando a terceirização em TI para focar no negócio principal e, mesmo encontrando diversas desvantagens, inclusive com relação a custos, acreditam que os benefícios justificam. Ainda identificaram-se alguns obstáculos internos para a terceirização, principalmente quanto ao receio de se perder a inteligência do negócio. O acompanhamento dessas atividades terceirizadas é realizado pela equipe interna e por critérios estruturados, onde se verificam os níveis de serviço

Implementação de processador banda base ofdma para downlink lte em fpga

This work treats of an implementation OFDMA baseband processor in hardware for LTE Downlink. The LTE or Long Term Evolution consist the last stage of development of the technology called 3G (Mobile System Third Generation) which offers an increasing in data rate and more efficiency and flexibility in transmission with application of advanced antennas and multiple carriers techniques. This technology applies in your physical layer the OFDMA technical (Orthogonal Frequency Division Multiple Access) for generation of signals and mapping of physical resources in downlink and has as base theoretical to OFDM multiple carriers technique (Orthogonal Frequency Division Multiplexing). With recent completion of LTE specifications, different hardware solutions have been developed, mainly, to the level symbol processing where the implementation of OFDMA processor in base band is commonly considered, because it is also considered a basic architecture of others important applications. For implementation of processor, the reconfigurable hardware offered by devices as FPGA are considered which shares not only to meet the high requirements of flexibility and adaptability of LTE as well as offers possibility of an implementation quick and efficient. The implementation of processor in reconfigurable hardware meets the specifications of LTE physical layer as well as have the flexibility necessary for to meet others standards and application which use OFDMA processor as basic architecture for your systems. The results obtained through of simulation and verification functional system approval the functionality and flexibility of processor implemented

Influência da adição de rejeitos cerâmicos nas propriedades de cerâmica vermelha da região do Recôncavo Baiano

The study of the physical and mechanic properties is an analysis of unquestioned importance on the production of the ceramic materials. In the region of the Recôncavo Baiano, there are ceramic and small brick factories, that still use rudimentary techniques, where the necessity of characterization of raw materials is denounced by the quality of the final product. The present work has for objective to study the behavior of the clay proceeding from the region of the Recôncavo, between the cities of Candeias and Camaçari/Ba, with addition of 5, 10 and 15% by weight of brick scraps, trying to optimize the physic and mechanical properties of the final product, aiming a better possibility of being manufactured, mechanic resistance, low linear retraction and water absorption. The brick scraps and the clay were characterized by FRX, DRX, TG, ATD and the granulometric analysis. Samples for testing where prepared by uniaxial pressing at 25Mpa, in 60x20x5mm size. The evaluated technological properties were: linear retraction, water absorption, apparent porosity and flexural strength. The samples were burned in electric oven in the temperatures of 850º, 950º and 1050ºC and compared its mechanical properties and the gresification. With addition of 15% by weight of brick scraps and burning at 900º-1000ºC the samples showed properties superior to that clay

Produção de grês porcelanato a partir de matérias-primas do estado da Bahia

The State Bahia, Brazil, presents different geological sites it with a very expressive variety minerals. It is situated among the very important States which produces minerals for industries, such as pointed aggregate, ornamentals stones and ceramics raw materials. Nowadays only four companies producting ceramics tiles. Porcelainized stoneware tiles is one of the noblest ceramics, depicting low water absorption (typically below of 0,5%), in addition to excellent staining resistance and mechanical strength. The present work aims at investigating the potential of local raw materials for the production of porcelainized stoneware tiles. For this purpose, these materials were characterized by X-ray fluorescence, X-ray diffraction, particle size analysis, thermal gravimetric analysis, thermal differential analysis and dilatometric analysis. Admixtures containing different compositions were prepared and fired at four temperatures, 1100 ºC, 1150 ºC, 1200 ºC and 1250 ºC with isotherm for 60 minute and heathing rate of 5 oC/min. After firing the samples, they were characterized by water absorption tests, linear retraction, analysis, apparent porosity, apparent specific mass, flexural strength, and microstructural analysis by X-ray diffraction and scanning electron microscopy . The results revealed three ceramics with porcelainized stoneware tiles characteristics and porcelain tile will be produce from raw materials originated in the State of Bahia

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Incorporação de cinzas da casca de café na produção de placas cerâmicas para revestimento

Brazil is the world s leading coffee producer. In 2008, 45.99 million of 60 kg bags of benefited coffee were produced. In the process of improvement 50% is grain and 50% is husk, thus, 1.38 million tons of coffee husk are produced annually. The husk is used as combustible in the drying and improvement ovens in the coffee farms, generating ash as residue. These ashes contain a high concentration of alkaline metals and earth metals, mainly K2O and CaO. This work studies the use of this residue in the ceramic tiles industry, as fluxing agents in substitution to the feldspar. Ten mixtures with equal ratios of clay and kaolin, proceeding from Bahia and the residue (varying from 30 to 5%) were defined and produced in uniaxial tool die of 60x20mm with approximately 5 mm of thickness and 45MPa compacting pressure. The samples were fired in four different temperatures: 1100 °C, 1150 °C, 1185 °C and 1200 °C during 60 minutes and characterized by means of X-ray fluorescence, X-ray diffraction, gravimetric thermal analysis and differential thermal analysis. The results of water absorption, apparent porosity, linear shrinkage, XRD, dilatometry, flexural strength and SEM were also analysed. The test specimen with addition of 10% of ash fired in 1200 °C resulted in 0.18% water absorption and 40.77 MPa flexural strength, being classified as porcelain stoneware tiles according to ABNT, UNI and ISO norms

A criança e o brinquedo-TV: análise sobre o discurso publicitário direcionado para a infância na Rede Globo de Televisão

Esta investigación es un análisis del contexto actual que rodea a la publicidad brasileña, más concretamente, la publicidad discurso televisivo dirigido a los niños en Brasil. Análisis de los documentos se basa en la revisión retórica (Leach, 2004) (SODRE, 2006) A partir de la primera supuesta inadecuación de algunos de sus contenidos al público para que se comunican. También investiga las posibilidades de regulación y la educación del consumidor y el papel de los medios de comunicación en la sociedad mediante la movilización exigiendo el cumplimiento y la mejora de la legislación vigente, evitando los posibles abusos y distorsiones de las secciones generales de la ley. Hemos llevado a cabo por separado se analiza en los niños y sus conceptualizaciones y la función social, abordando también el juguete y el acto de jugar hoy y su sede histórica en un intento de crear una fundación que apoya el análisis de la relación entre la infancia y la publicidad y el consumo, basado en obras de Roger Silverstone, Kapferer, Leontiev y Walter Benjamin. También se hicieron inferencias basadas en estudios de Pablo Del Río, sobre las posibles consecuencias psicológicas del consumo de medios por los niños, sin embargo, en arvorarmos llevar a cabo investigaciones en el estudio de la recepción. Se enfrentarán, tanto en acciones a favor de la aprobación de la Ley 5.921/2001 N º Suplente sugiere que la prohibición de la publicidad infantil en todo el país, los enfoques ampliamente "integrado" y por lo tanto, favorables a la continuidad de la actividad publicitaria en el país bajo la acción de la CONAR de autorregulación, lo que demuestra sin embargo, la viabilidad de ambas propuestas. Tambien relativa a el CONAR se llevó a cabo un estudio sobre su Consejo Asesor, dando a entender su composición y características. Por último, se estudian las posibilidades y el concepto de la educación para el consumo de los medios de comunicación, a partir de la utilización de los recursos de los propios medios de comunicación, como una propuesta para un cambio de paradigma en el mercado de la publicidad en Brasil. En conclusión, vemos que a partir del análisis de la publicidad comercial de los niños atendidos por la Red Globo de Televisión, en una muestra de 170 inserciones, todavía existen graves lagunas, pero que los desequilibrios se pueden resolver con medidas relativamente sencillas que incluyan campañas de educación y la exigencia de adecuación de los pocos grandes anunciantes que violan la ley. Afortunadamente, una nueva entrega de los anunciantes mostró la responsabilidad social en sus acciones

Estudo das ligas titânio-zircônio resultantes do processo de fundição plasma-skull para aplicações como biomateriais

The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis