Encalhes de Cetáceos ocorridos no período de 1984 a 2005 no litoral do Rio Grande do Norte, Brasil

Strandings of live or dead aquatic mammals constitute an important instrument to provide information regarding the occurrence, biology and ecology of these species. The aim of this study was to register the stranded species of cetaceans, the frequency and the spatial-temporal distribution of theses strandings during the period of 1984 to 2005, in the coast of Rio Grande do Norte. Data was acquired through the monitoring of strandings in the north, north-west and south coast of RN, and through information obtained from institutions and newspaper archives of the State. A total of 122 strandings of cetaceans were registered along the coast of Rio Grande do Norte. Of the 14 species of cetaceans registered, four species had higher frequencies: Sotalia guianensis (n= 65), Steno bredanensis (n = 6), Globicephala macrorhynchus (n = 6) and Physeter macrocephalus (n = 7). Out of 118 strandings, 93 occurred in the south coast (78.8 %), 23 in the north coast (19.5%) and 2 (1.7%) in the north-west coast of the State. The highest frequency of strandings occurred during the months of August to March and the maximum number of strandings occurred from 2000 onwards, as a consequence of the intense monitoring of the Pequenos Cetáceos Project in Rio Grande do Norte

Compressão de Imagens Usando a Função de Peano e a Transformada Wavelet 1D

In this work, spoke about the importance of image compression for the industry, it is known that processing and image storage is always a challenge in petrobrás to optimize the storage time and store a maximum number of images and data. We present an interactive system for processing and storing images in the wavelet domain and an interface for digital image processing. The proposal is based on the Peano function and wavelet transform in 1D. The storage system aims to optimize the computational space, both for storage and for transmission of images. Being necessary to the application of the Peano function to linearize the images and the 1D wavelet transform to decompose it. These applications allow you to extract relevant information for the storage of an image with a lower computational cost and with a very small margin of error when comparing the images, original and processed, ie, there is little loss of quality when applying the processing system presented . The results obtained from the information extracted from the images are displayed in a graphical interface. It is through the graphical user interface that the user uses the files to view and analyze the results of the programs directly on the computer screen without the worry of dealing with the source code. The graphical user interface, programs for image processing via Peano Function and Wavelet Transform 1D, were developed in Java language, allowing a direct exchange of information between them and the user

Melhorando a estimação de pose com o RANSAC preemptivo generalizado e múltiplos geradores de hipóteses

The camera motion estimation represents one of the fundamental problems in Computer Vision and it may be solved by several methods. Preemptive RANSAC is one of them, which in spite of its robustness and speed possesses a lack of flexibility related to the requirements of applications and hardware platforms using it. In this work, we propose an improvement to the structure of Preemptive RANSAC in order to overcome such limitations and make it feasible to execute on devices with heterogeneous resources (specially low budget systems) under tighter time and accuracy constraints. We derived a function called BRUMA from Preemptive RANSAC, which is able to generalize several preemption schemes, allowing previously fixed parameters (block size and elimination factor) to be changed according the applications constraints. We also propose the Generalized Preemptive RANSAC method, which allows to determine the maximum number of hipotheses an algorithm may generate. The experiments performed show the superiority of our method in the expected scenarios. Moreover, additional experiments show that the multimethod hypotheses generation achieved more robust results related to the variability in the set of evaluated motion directions

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Encalhes de Cetáceos ocorridos no período de 1984 a 2005 no litoral do Rio Grande do Norte, Brasil

Strandings of live or dead aquatic mammals constitute an important instrument to provide information regarding the occurrence, biology and ecology of these species. The aim of this study was to register the stranded species of cetaceans, the frequency and the spatial-temporal distribution of theses strandings during the period of 1984 to 2005, in the coast of Rio Grande do Norte. Data was acquired through the monitoring of strandings in the north, north-west and south coast of RN, and through information obtained from institutions and newspaper archives of the State. A total of 122 strandings of cetaceans were registered along the coast of Rio Grande do Norte. Of the 14 species of cetaceans registered, four species had higher frequencies: Sotalia guianensis (n= 65), Steno bredanensis (n = 6), Globicephala macrorhynchus (n = 6) and Physeter macrocephalus (n = 7). Out of 118 strandings, 93 occurred in the south coast (78.8 %), 23 in the north coast (19.5%) and 2 (1.7%) in the north-west coast of the State. The highest frequency of strandings occurred during the months of August to March and the maximum number of strandings occurred from 2000 onwards, as a consequence of the intense monitoring of the Pequenos Cetáceos Project in Rio Grande do Norte

Compressão de Imagens Usando a Função de Peano e a Transformada Wavelet 1D

In this work, spoke about the importance of image compression for the industry, it is known that processing and image storage is always a challenge in petrobrás to optimize the storage time and store a maximum number of images and data. We present an interactive system for processing and storing images in the wavelet domain and an interface for digital image processing. The proposal is based on the Peano function and wavelet transform in 1D. The storage system aims to optimize the computational space, both for storage and for transmission of images. Being necessary to the application of the Peano function to linearize the images and the 1D wavelet transform to decompose it. These applications allow you to extract relevant information for the storage of an image with a lower computational cost and with a very small margin of error when comparing the images, original and processed, ie, there is little loss of quality when applying the processing system presented . The results obtained from the information extracted from the images are displayed in a graphical interface. It is through the graphical user interface that the user uses the files to view and analyze the results of the programs directly on the computer screen without the worry of dealing with the source code. The graphical user interface, programs for image processing via Peano Function and Wavelet Transform 1D, were developed in Java language, allowing a direct exchange of information between them and the user